Utility HP cannot find installed CLJ 2605dn

Mac OS x 10.9 Mavericks

Color LaserJet 2605dn on ethernet

  • The printer is found and installed by ethernet and I can print to that beautiful.
  • Options and supplies in the system preferences window cannot display the power levels
  • The HP utility cannot find the printer at all (even if I manually enter the IP address or connect via USB).

Printer device driver is 19.9, version of the HP utility is software updates and 5.19.2 picked up the update from HP and I installed the driver for printer HP 2.16.1 package manually.

Any thoughts?

Chris

Hello Chris,

I'm the developer responsible utility HP.  Sorry to say that this particular printer was never took care of with the HP utility.

However, you can print a Setup page that will give you an IP address.  If you type this address into your browser, it will take you and built-in Web server, and it allows you to manage your printer.  I would like to know if you have any problems or have any other questions.

Mac - Q

If you have found useful please click the button of congratulations.

Tags: HP Printers

Similar Questions

  • Cannot find install.app

    I had to have a new hard drive put in my Mac mini. I'm trying to re - install Adobe Creative Suite master collection 5.5 box but can't find install.app on any one of the three discs. Can anyone help? Thank you.

    Problem solved - went to my account where were found the serial numbers - doh!

  • HP Pavilion g6-1322se Notebook: [SOLVED] cannot find/install the appropriate network controller driver

    Hello

    I installed Windows 7 64 bit as a SECOND OS on my laptop, everything goes very well with Windows 10 a.

    On Windows 7, the Netowrk controller driver is missing and I can not connect to Internet via Wifi.

    I manage to find a suitable driver for my network controller (don't know if it's Broadcom and Realtek).

    I tried to install a large number of them, and finally, it fails with the error:

    ["0" error and the installation program cannot contiune]

    Product name:

    Laptop HP Pavilion G6-1322se

    Hardware ID:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Any suggestions?

    Concerning

    Hello world

    I found a solution for this. I downloaded the driver appropriate from this link:

    http://support.HP.com/my-en/drivers/selfservice/swdetails/HP-Pavilion-G6-1300-notebook-PC-series/5186808/model/5218300/swItemId/ob-95652-2

    After extraction, it will start the installation, and the error appears again. Nevertheless, follow these steps after the error:

    1. Locate the file extraction. [You can see address during extraction after clicking on the downloaded file.]

    2. go to the Device Manager, right-click on the network controller and click Update driver software.

    3. choose to do it manually. Find the folder of extraction [I mentioned earlier].

    4. made!

    * Do not forget that, in order to get the best driver, you should IDENTIFY YOUR PRODUCTS AUTOMATICALLY by the HP Web site and then go to its pilots!

    Concerning

  • I want to install Premiere Pro on a second computer, but cannot find install a TEST VERSION. I have a subscription.

    I would install the first Pro2015 on a second computer, but can not find any option to purchase or install a test version of Adobes Web page, that I have not previously installed on the second computer in CC.

    Please use creative cloud to install Premiere Pro 2015: https://helpx.adobe.com/creative-cloud/help/install-apps.html

    You can use: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  • Cannot find/install Fireworks via CC

    We license Creative Cloud for teams of 11 users; 2 of these users strongly use Fireworks (and did so through CC for some time).

    Recently, he had to rebuild the computer of one of these users.

    The reinstallation of more Creative Cloud (on Windows 10) the user has noticed that Adobe Fireworks is missing.

    Please can someone tell if there is a way to restore this heavily used the application?

    (I've seen this, but we do seem to have with our CC subscription CS6 license keys)

    Hi estar.

    I'm sorry for the inconvenience caused!

    Fireworks is included, please open creative Office cloud app-> go to the applications tab - > find additional Apps - > select the previous Version-> Fireworks

    I hope this will help you!

  • Airport utility cannot find Time Capsule

    Airport utility can't find my Time Capsule.

    I tried to reset (factory settings) several times and then reconfigure TC.

    It works for 2 minutes; the led is green and the TC is visible in AU - but while time Machine is looking for the disc and the preparation of the backup, the disk disappears from the to THE and therefore cannot perform a backup.

    Also, the light is still green after the TC disappears from the AU.

    Could there be a problem with AU?
    Or my TC is all just too old? -I do not know what generation it is, but it's at less than 4 years old, maybe 5.

    I have a MacBook Pro running on El Capitan 2012.

    I hope someone knows how to solve this problem

    Could there be a problem with AU?

    No, Airport utility is very good.

    I have a MacBook Pro running on El Capitan 2012.

    Network problem is common... and it's here... El Capo.

    Or my TC is all just too old? -I do not know what generation it is, but it's at less than 4 years old, maybe 5.

    Possibly in combo with this old CT... What model is the basis... A1xxx?

    Or in Airport utility immediately after a reboot... Hold down the option key and double click on the symbol TC. It will open the summary page with the template at the top.

    Have another go with the installation... See below.

    But tell us what is your provision.

    This modem you... brand / model?

    What the TC set, bridge or router?

    Is the computer connected by ethernet or wireless? Have you tried both?

    Here are my suggestions...

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually.

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

    Let us know how you go.

  • error message when removing a program "an installation support file could not be installed, the system cannot find the file specified" _

    Try to delete a file from the Program Neighborhood Agent, so I can load a different version.  When I try to remove the program through the Control Panel, it says "an installation support file could not be installed, the system cannot find the file specified."

    Hello rarif, welcome.

    I recommend that you try and that you use the Windows Installer Cleanup Utility (WICU).

    1. go in:
    http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    2. download the utility and install it
    3 run the utility from START > all programs > Windows Installer Cleanup...

    4. find the program you want to uninstall, then remove the
    5. next, restart your computer

    Let us know if this helps,

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • OfficeJet Pro 8600 Plus: HP Utility cannot find wireless Officejet Pro 8600 Plus

    My Officejet Pro 8600 is connected to my wireless network, has obtained an IP address.

    However, I cannot find the printer in the HP utility and cannot connect, even if I try to manually enter the IP address.

    It works fine on the wireless network, recently, he stopped. (I print not that often, so I don't know what changes occurred sinnce the last time I printed)

    I deleted all of the HP software and drivers, downlaoded the latest version and re-installed them.

    I reset the network connection on the printer.

    Operating system is OS X 10.10.5, everything up to date.

    Printer by USB works fine.

    Hello

    Try to reboot your router by unplugging its power for a while and wait a minute or two.

    Then restart the printer and your Mac and try to print.

    If it persists, has what distance is the printer of your router?

    You see the blue light on wireless?

    By pressing the icon on the printer wireless, can you access the IP address listed from your Mac?

  • C7280 when I try to install from cd, I get the message cannot find 7cS5B3C

    When the cd-rom for c7280 hpdriver instaaling I get the message cannot find

    c;\users\huubs\AppData\local\temp\7cS5B3C\setup\...\setup\block [next illegible]

    And it stops

    Huub

    Hello huubs

    Try the following to "scrub" your machine HP printing software. This should clean your computer so that you can re - install the printer as if it was never installed previously. Sometimes this solves problems with the driver.

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download drivers and full software features

    Photosmart C7280 Full Feature software (Windows 7)

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download drivers and full software features

    Photosmart C7280 Full Feature software (Windows 7)

    10. run the download to reinstall the printer

  • Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

    Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

    -


    The installation operation failed!

    The installation operation encountered a fatal error:

    Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

    -


    The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

    Here is what I tried:

    -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

    --Also tried another drive (IDE) CDROM

    -Created a bootable USB using uNetBootin 4.7.1 and booted from it

    -Switched SATA setting in the BIOS from AHCI to IDE

    I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

    Help - all do you offer for my next step?

    Have you had a previous vSphere installed on your system?

    I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

    When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

    So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

    Then I suggest that you try upgrading and see how far that gets you.

    Good luck (and a beautiful weekend)

    Marino

  • had a problem with mozilla firefox, uninstalled, tried to re = install and get an error "cannot find personal...". »

    I really want to give Fire Fox on my computer. Why can't I re - install.
    When reinstalling, it goes through all the windows, asking permission... and after that it says "completed" a window pops up saying cannot find personal identification information and the program does not start.

    Hi James,

    I've never heard of this problem before, can you post a screenshot to help us identify it? Just follow the instructions in this article How to make a screenshot of my problem?

    Also, what OS is the computer that you are trying to install Firefox on running (XP, Vista, 7, 8)?

  • Cannot re - install printer: unable to find appropriate software

    This week, with the help of Apple's Support, I had to back up and erase my disk then re - install OS (Mavericks), my computer kept crashing. I now fight to re - install the printer: when I plugged everything back initially in through port USB immediately gave me the prompt for the OS to install the driver, and since then he has appears connected as the scanner function works very well in the Image Capture.

    But the printer does not appear in printers and scanners. If I use the + button to try to add it, then the printer name appears, but after I try and add it to the Treaty demand window then opens with "an error occurred while trying to add the selected device. Cannot find the appropriate software on your system after a software update running. »

    The printer was working fine on the system before the reboot, and if I try to find the driver manually, then every possible driver of Samsung is available, with the exception of one specific I'm looking for: Samsung CLX - 3180 Series.

    I can not even find mention of this model on the web site of Samsung.  A web search only turns sources of third-party cartridges in general.  It must be either an ancient model or a really dark. How old is it?  Drivers for it are come on CD?

    This is an old discussion about this: Yosemite samsung clx-3180 printer driver problem

    Try: http://www.samsung.com/us/support/owners/product/CLX-3185FW there Mac drivers for a different printer but sometimes what they work on similar models.  You will need to dig a little to find some that downloads Mac (select + info)

  • 3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? Using XP version 3.6.7

    3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? I use XP and Firefox version 3.6.7

    This has happened

    Each time Firefox opened

    Is since mid-July

    Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
    It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    You can skip the step to create a new profile, which is not required on this issue.
    .....
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Cannot find the .inf to install HP 5600 print server port

    I try to add a server port to print to my printer HP 5600 on Win 7.

    Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

    Cannot find the INFs on any CD progrm supplied with the printer.

    How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

    Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

    Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

    complete set upward for win 7

    Bob

  • Cannot find how to install iPhoto om macbook IOS 10-7-5. New with apple

    Cannot find how to install iPhoto om macbook IOS 10-7-5.

    New with apple

    Have you bought your Mac of opportunity? A new mac should have with pre-installed iPhoto, if the Mac comes with Mac OS X 10.7.5.

    If the Mac initially had another system installed, look at the system installation discs, which belong to the Mac. On one of these disks should be an installer for iPhoto and other iLife applications.

    If the original system of the Mac is Mac OS X 10.7, there will be no installation disks.

    In this case look at the App Store, the fourth purchases tab, if you see iPhoto with a button I agree. Press this button.

    If iPhoto is not visible on the purchases tab, the previous owner has accepted the pre-installed iPhoto already to the AppleID and may not be transferred to you. You can buy your own copy.  Apple is no longer develops and sells iPhoto. Try buying an installer of iLife 11 on Amazon or eBay.

    iPhoto 11 works most completely, however. The functionality of the site is longer supported on the Mac OS compatible version X 10.7.5, because Apple has only the support of Google Maps.

    If your Mac is compatible, consider upgrading to Mac OS X 10.11. El Capitan and the use of the new Photos.app instead of buy a program that is no longer supported and developed.

    The Photos.app installs automatically, if you upgrade to El Capitan.

Maybe you are looking for

  • Windows 7 and extended warranty

    I still have an old computer of 19 months with 17 months to go on my extended warranty.  I think to move to Windows 7 Home Premium to my current Windows Vista Home Premium.  Questions about my warranty, if any, will arise if I upgrade?

  • Satellite A60 - 102 - what HARD drive is possible

    What capacity of hard drive used in this laptop

  • Satellite 1135-S1553 without S-Video output Port - how to connect a TV

    I have a portable Satellite 1135-S1553, how to connect it to the TV without having the S-video output Port in my laptop?

  • Satellite A60: charging problem

    Hey,.I have a toshiba satellite A60 laptop. My laptop has 2 years. After that I used my laptop in battery mode, it fell because the battery was empty. When I plugged it on the net, the battery led flashed amber for less than a second and went back. T

  • A key recovery does not!

    Hi all, as indicated on the title, my one key recovery does not work. Whenever I press the recovery button (the host files charges) and when it finishes, it hangs there. The first time I tried this it worked fine. The last thing I did was to put some