UWP.exe not found
I get an error when I click on a drive to view the files. It says "Windows cannot find 'uwp.exe'" where I could download a replacement for this file?
Very probably infected by a virus Autorun. To check:
> Open Folder Options by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. Select the tab click on show hidden files, folders and drives. view and hide the protected operating system files check boxes, and then click OK.
> Right click and explore the disc (assuming it is not your CD/DVD drive).
> Check for any file "Autorun.inf".
Such a file is not required to be present at the root of the hard drives. If necessary, manually remove / them. "You can open it and check if it contains an entry"OpenWith = "ump.exe"
Of course AntiVirus scan is recommended!
See you soon.
Tags: Windows
Similar Questions
-
computer does not start.
the screen message is: "autochk.exe not found."
second message is: "stop: c000021a (fatal system error)".
«the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»
"the system is stopped.
Hi Bobzurcher,
· Did you do changes on the computer before the show?
I suggest you to consult the article in the Microsoft Knowledge Base and check.
How to solve an error "STOP 0xC000021A.
http://support.Microsoft.com/kb/156669
Let us know if that helps.
-
I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found. What should I do?
Hello
1. don't you make changes on the computer before this problem?
Check if the steps of troubleshooting the following article shows you help.
Cannot find the Rundll32.exe file when you open Control Panel
http://support.Microsoft.com/kb/812340 -
Unable to Dassault catia v5 Setup error: CXINS.exe not found
Original title: CXINS.exe not found
My os is win7 32 bit, and I want to configure Dassault catia v5, when I click on setup, this error all?
CXINS not raise in C:\Users\...\AppData\Local\Temp\TempDSUnload what should I do: its very important for me to install this software
Hello
1. are you able to install other applications?
I suggest you to try the steps below and check if it helps.
Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Follow these steps to reset the computer to start as usual:
(a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
(b) under the general tab, click the Normal startup option, and then click OK.
(c) when you are prompted to restart the computer, click restart.
Method 2: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers
Method 3: Clear the following temporary folder:
\AppData\Local\Temp C:\Users\Also enable the option Show hidden files
If the problem persists then I suggest you contact the software publisher.
Hope this information is useful.
-
I get an error, "CXINS.exe not found" when trying to install catia v5 Dassault.
Original title: 123
Unable to Dassault catia v5 Setup error: CXINS.exe not found in windows7
Hi dinesh_922,
Look here for the answers and troubleshooting tips.
http://www.catiatutorialcad.com/CATIA-help/
Depending on what version it is, my interpretation is that it is not backward compatible...
Good luck.
-
I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it
I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it
-
Adobe Premiere.exe - Not found entry Point
Hi people,
I had a big problem (?) with adobe cs5 first. I just will not start. I always get the error message:
Adobe Premiere.exe - Not found entry Point
Here is a screenshot. It's in German, so here's a quick translation of the words:
'Einsprungspunkt nicht found' is 'Point of entry not found '.
"non found" is "not found".
second error message:
"Die angegebene Prozedur wurde nicht found" is "the declared procedure is not found.
Thank you guys so much.
My system:
AMD Phenom Quad-Core
NVIDIA 9800gtx
Windows 7 ultimate
8 GB ram
Resolution: 1920 * 1080
See you soon
Jan
Hi Jan,
-to obtain a small step forward, I suggest to take a look at the "Event Viewer".
To get there:
Control Panel\Administration Tools\Event Viewer.
Here you can find more information ' end your bug.
Info sometimes very useful.
Hope that event viewer will be more accurate.
P.S.: "Event Viewer" and "Administrative Tools" are translated by myself of an Italian Win7 OS.
Let know
-Your Windows error says GPUFoundation.dll not found:
you have it in case of first?
Must be a 204Kb .dll file.
-Is your suite has downloaded (ESD) or retail (DVD)?
As long as I know, Adobe ESD software, library is downloadable separately.
-Is your first try by opening the first application or don't have it run before and what happened afterwards?
In any case, have you taken a quick glance this?
http://blogs.Adobe.com/premiereprotraining/2010/09/Premiere-Pro-CS5-5-0-2-update.html
Ciao,.
Giorgio
-
I tried four times to reinstall the photosmart C7280 on windows 7 (64-bit) computer software after problems with double-sided printing. Software downloaded OK. When installing got message "the not found fichier...\Setup\hpzpr140.exe. Auto-generated error report. Sent to HP and a fix sent on my desk. After following the instructions and the installation at this point was then cleaned. Then got the message "HP Installer uninstaller has stopped working". No solution.
I've never had this problem before with the previous re - installs. Any ideas?
dave_faulkner,
Lets try to use uninstall L4. Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://goo.GL/vf4Z
9 download drivers and full software features
http://goo.GL/ASbRC
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://goo.GL/vf4Z
9 download drivers and full software features
http://goo.GL/ASbRC
10. run the download to reinstall the printer
Let me know the results, Best of Luck! -
application rundll32.exe not found application not found __updspapi.dll
I have two problems at the moment.
The first occurs if I try to open most of the icons in my Control Panel then I get the message: application not found c\windows\system32\rundll32.exe.
The second issue is when I try to run a file I am asked to select a program to run it: installation of windows service pack and then get the message: application could not start because updspapi.dll is not found.
Thanks in advance for any help or advice.DanielTL88 wrote: I have XP SP3, AVG Internet Security - with the LinkScanner etc (no previous software)
She appeared saying that he had found that a Trojan horse and I got rid of it - but since all the shortcuts to programs go straight 'Open with' window...
You didn't have an antivirus application installed before installing AVG Internet Security (free trial)? See...
Can I install MSE [or another anti-virus application] to clean my already infected computer?
http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Tsp1.dll TPMauth.exe not found error
At the start of my computer (Windows XP SP3) I get an error message TPMauth.exe tsp1.dll not found. I saw an answer for that rack on Windows 7. What is the procedure for XP?
If this does not work from above you can try to save the dll file by clicking on start > then in the run box type
RegServ c:\windows\system32\tsp.dll
Do not know if this will work, but worth a try.
MyPcHealth - free tools
-
Help! Explorer.exe not found entry point
I restored my computer to an earlier state to undo changes I had made, and after the computer has restarted and I get my password I get a message box with the header "explorer.exe Entry Point not found". Theres a lot of coding blurred any in the message and down I click ok. The message disappears and I end up with a black screen and the arrow of the mouse. I need help BADLY! What should I do?
Standard hardware troubleshootingFirst to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.
Diagnosis of memoryIf you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.S.M.A.R.TStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason ListIf it is on will be true, otherwise on enable in the BIOS of the computer.Predict the failure must be False if everything is ok.In Vista and later if SMART failure predicted Windows prompts the user to run the backup.Run chkdskIn computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).sfc/scannowHeatHeat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.For memory diagnostic resultsClick on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-resultsDouble-click the entry for more details on this entry.For results of Chkdsk
Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 50 , and the Source is disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS
Look for EventID is 134 and Source is NTFS
Look for EventID is 137 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is ChkdskLook for EventID 26213 and Source is Chkdsk
Look for EventID 26214 and Source is ChkdskDouble-click the entry for more details on this entry.PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|moreThere are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these. -
AppleSyncNotifier.exe - not found entry point
Whenever I start my laptop windows vista I get a message saying: the procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxm12.dll. How can I get rid of this message? I need simple step by step instructions please
Hello
It's an Apple problem.
Read this Information;
http://www.howtogeek.com/97004/how-to-fix-the-AppleSyncNotifier.exe-entry-point-not-found-error/
And one to fix it is recommended to uninstall iTunes, Quicktime, etc. and then reinstall them using:
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
If necessary post in Apple Discussions about it.
https://discussions.Apple.com/index.jspa
See you soon.
-
c:\Windows\system32\wuapp.exe
applications not found
Box Monte. I use vista. What is the problem and the solution?
Hello
1 have you made changes to your computer recently?
2. when appears the c:\Windows\system32\wuapp.exe box?
I suggest you carry out the methods and check them off below if it works fine:
Step 1
Run the System File Checker to fix corrupted files
support.Microsoft.com/kb/929833
Step 2
Perform the system restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-quest
Concerning
-
Windows 10
Fred for my English. I I would like to translate by Google
Norton software has been re- installation is needed. No solution.
When starting up pictures through Adobe Bridge , the following message : Bridge.exe - entry point not found
Can access procedural _crtCreateSymbolicLinkW not found in DLL C: \ Program Files (x86) \ Norton360 \ engine64 \ 22.5.5.15 \ MSVCP110.dll
This also happens when I start Adobe Bridge directly
On the Internet, has found the solution.
The average of MSVCP110.dll file in windows / system32, replaced by the file MSVCP110.dll to C:-Program Files (x 86)------Norton360------engine64------22.5.5.15------MSVCP110.dll
The file in Windows was older
-
Error message: EdgeAnimate.exe - not found entry Point
I am running MS Vista Ultimate 64-bit. My original edge download animate ran OK. However after the most recent execution updated, animate dashboard is no longer will launch. Here is the error message:
EdgeAnimate.exe - Entry Point not found: the procedure entry point GetGestureInfo could not be found in USER32.dll dynamic link library.
Does anyone have a solution?This was reported last week in the edge forum run by Vista users
http://forums.Adobe.com/message/5074933
The developers of Adobe Edge says they are aware but not yet solution I've seen.
I suggest join you this thread and follow from there.
Maybe you are looking for
-
Somehow configure Thunderbird to fetch mail from SSH?
I would like to have Thunderbird fetch email from a file on a remote server mbox. As ssh://server/home/user/mbox or you can also mount the SSH directory and use a local path to mbox.
-
Why the output signal is pulled up to stop the program in RT
I use 9401 output a PWM signal. When I run the program FPGA and the stop, it does nothing statement. BUT when I run the program through RT using the compiled bitfile and stop, there will be a high level of 110ms. Here's my diagrams FPGA and RT of a s
-
LabVIEW: Null window... stopped to stranger on the block diagram
Hello I have a pretty important program that has been written in Labview 6.0. Recently, we have upgraded to Labview 9.0 and this program has been exported to an executable file with the new version. When you run the executable file, I sometimes have
-
starting to get a pop up = document Manager service could not be started, check the filter of the vault is loaded and run
-
What headphones do you recommend for Inspition 15 3000 series PC laptop? I have big problem with Plantronics with unfortunatelly and USB connector (it was excellent for many laptops up to now) the same with Logitech. I found very uncomfortable to use