v 10.0.2 update automatic does not
I've been running FF 10.0.2 for awhile and just told him a Web site that I have 14 FF or FF 15 clocked. I've always had the automatic update on, but obviously it does not work. I've now been 'check updates' on the channel of update, with no result after be connected for more than 1/2 hour.
Any suggestions appreciated - I would just download and install the latest version, if not eradicate which my existing data.
Thoughts, please?
Thank you very much
When you are behind by that many versions, it is best to download and install the latest version.
http://www.Mozilla.org/en-us/Firefox/FX/#desktop
Tags: Firefox
Similar Questions
-
Windows 7, update services does not work
I have a problem to update software in windows 7.
I have a HP G72 laptop.
I replaced my hard drive. 350GB, Western Digital 750Go digital West.
-J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).
The new disk hard there however any possible updates of windows. (the bar is red on the left).
-After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.
-Remove the folders from the dir c/windows/SoftwareDistibution, no results.
-Checked the status of services: windows update is statred and in automatic mode.
N ' tried microsoft 'Fix - it' no results.
-updated the drivers intel, no results.
-Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.
Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]
Do a clean boot, without result.
Does anyone know a solution to this problem.
Thank you.
Ed.
Windows 7, update services does not, RESOLVED.
The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.
For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .
Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.
Good luck to solve you yours it took me two weeks to find it.
Ed.
-
I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?
Hello
Make sure you have the latest network adapter drivers fron toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
and if windows update is at the origin of the problem change how to get updates to uncover the problem update
When you have found the issue, a right click on it then invited uac then hide
read the information on the link below
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
-
38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.
Thank you. I could sign G-mail in Mode safe, so I "refreshed" Firefox and that took care of him. Appreciate your quick response and helpful instructions.
-
After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help
You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).
-
Windows Server Update service does not work after the installation of KB2720211
I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches. It was a new server starting with WSUS added at this time 1 months ago. He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function. After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore. It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.
The problem is that the update service does not start. An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is. Here is what has been done so far all that in the same issue:
1 deleted WSUS and restarted and installed it again.
2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).
2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)
3. install the KB2720211.
4. installation KB2734608
5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).
I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer. I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update
Hey lasdj,
Thanks for posting in the Microsoft answers site!
If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.
To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.
Therefore, remove the compression of the DATA directory and run together to the top again.
Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.
See the links below for more details:
Windows Update error 6d9e
http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9EInstall SQL Server 2005 and 2008 failures (compressed DATA directory)
http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspxI hope this helps!
Gokul T - Microsoft Support -
Win7pro update download does not start
- win7pro. Download ISO update
- does not work in the browser without stop with the second window asking open/save/Cancel. by clicking on 'Open' start the Browse button, and then stops and same window starts again.
- I tried fresh download and still no.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
Windows 7 Home premium, HP touchsmart tm2 Windows update service does not
Recently, the hard drive on my laptop completeely failed and had to be replaced. Then the BONES had to be re-load. Since then, windows update service does not work
It wouldn't make any difference, if you upgrade to the version professional or ultimate edition.
Try the following at the bottom of the link to solve your problem.
http://helpdeskgeek.com/Windows-7/cannot-run-Windows-Update-on-a-Windows-7-PC/
-
"The Windows update service does not work. Please restart your computer.
If I click on "Check for Updates", a dialog box appears:"The Windows update service does not work. Please restart your computer.
I rebooted several times, but the same error.Help, please.Thanks in advance.This site will help you get the update of Windows running service
http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm
-
Update to win 8 identifies the updates but does not download anything from 0 KB
ASUS va550ca out of the box
Lists updates and does not download anything 0 kb
Back of bar activity scroll on the screen
Hi Mark,
What is the exact error message you received?
Try these and check.
Run the System File Checker tool, install the update to Windows and check.
Use the System File Checker tool to repair missing or corrupted system files.
http://support.Microsoft.com/kb/929833/en-us
If the problem persists, run the DISM tool and check.
-
I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?
-
I try to install the update of PS CS6 can read files camera raw Nikon D800. The exe file fails and says trying to install the application manager. I did it and the update still does not work. Now what?
update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/
If this fails, attach a screenshot of the error message if it is in English. otherwise, quote it.
-
Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.
Any ideas out there?
I know the pro 2 surface is not the real model, but at least it should work fine.arwinq,
You can see the system requirements, including the maps here.
https://helpx.Adobe.com/Illustrator/system-requirements.html
but I fear that you may be taken in this GPU issue described by butz in post #13 here:
https://forums.Adobe.com/message/7773402#7773402
You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.
-
Update/install updated C3 does not work
Update/install updated C3 does not work.
Computer is an Apple C5 Desktop OS 10.5.8, Dual 2.7 GHz PowerPC, 3.5 GB of DDR SDRAM.
I use applications Adobe C3, which now requires updates. When an Adobe product needs an update, an update notification dialog box appears. I click ok to download and install the Adobe updates to all my products. I saw preferences indicating the C3 and a number of other applications. I click on continue and the download begins. Installation does not seem to happen or at least it is / was no indication except noting a percentage of completion passing.
The problem is that this process continues and continues and continues during and in the course of every time I clicked on continue.
When I could see the preferences once, I deselected all downloads there. I then clicked on continue. Unfortunately, the process has continued and continues and continues whenever I clicked on continue to download, but not to the best of my knowledge.
There is no error message.
This problem occurs for every download of the update. I have to click Cancel to stop this process so that I can continue work on computer.
Help, please.
Bud Willner
Many gave to the buggy auto update and go to the page updates, get them from there and run them locally.
Maybe you are looking for
-
I used Photo FX to add titles to slides when you use aperture. How do I do this with Photos?
-
I can't seem to locate all my favorites (addresses of important sites) after I switched to chrome. Help! How can I switch back?
-
Windows continues to prevent my McAfee update Launcher to work.
Windows continues to prevent my McAfee update Launcher to work. My internet security McAfee always says I'm protected, but windows does not of course to update for some reason any. I tried looking for updates to McAfee and it starts to look, but then
-
Error in mail server error 554 Live 0X800CCC6F
I get server error 554 error response 554 with Windows Live 0X800CCC6F e-mail error. As a result I can't send emails. Any suggestion would be appreciated. Bart
-
Problems of its Smartphones blackBerry with Blackberry Curve 9320
Hi all, ive had the 9320 for about a month now and this morning his deicded do not play all the sounds at all. Ive not changed no settings, ive also checked that I didn't cut the phone, using its model of normal sounds sound, I have been using this l