V. ultimate language download offering not languages after a clean install of the operating system and install live SP2

Similar Questions

• I have Adobe Acrobat 9 Standard on both of my computers.  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.  After you install Acrobat 9 special and differential treatment in the computer once,

  I have Adobe Acrobat 9 Standard on both of my computers.

  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.

  After you install Acrobat 9 special and differential treatment in the computer once, I wanted to update the update of the version 9.0.0 software to the same level as it was before the crash and that the other computer has version named 9.5.5.

  The update to version 9.0.0 system does not at all. 'There is no update' listed in the dialog box.

  Can you advise how to get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level it had before the accident.

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/Win/9.x/

• After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  NTSC and PAL are analog standards and don't apply to the share or export settings in iMovie.

  It creates the same FPS and dimensions as your source file.

  What you trying to create?

• I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  In addition to the steps mentioned above, you can also try:

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Why after 6 months not my new desktop computer says that the operating system is not authentic, alan

  Why after 6 months my new desktop computer, says that the operating system is not authentic, I bought my computer from currys/pc world about 6 months ago and had no problems until that in one of the i.e.microsoft of updates to microsoft essentials installed without my permission and then maybe 2 weeks after for some reason it is now not an authentic version of windows.can you help me with this little problem as a failure more has turned up, when I try and open messinger live there now is a missing file up to now no messinger called, wlidcli.dll unless I go via google.alan

  alanandmovita wrote: why after 6 months my new desktop computer, says that the operating system is not authentic, I bought my computer from currys/pc world about 6 months ago and had no problems until that in one of the i.e.microsoft of updates to microsoft essentials installed without my permission and then maybe 2 weeks after for some reason any , now is not a genuine version of windows.can you help me with this little problem such as a power outage more has turned upward, when I try and open messinger live there now is a missing file up to now no messinger called, wlidcli.dll unless I go via google.alan

  Hello alanandmovita, you could try to return to a Windows Restore Point before your latest Microsoft updates where you mentioned that he installed Essentials without your permission.

  Go to the start ORB, all programs, accessories, System Tools, System Restore, and look for a date before the updates were installed.

  There is a reason, that I never use automatic updates. Windows updates all that Microsoft feels that they want that you want or need or not.

  Just some thoughts.

• Windows 7 will not activate after a clean install and several improvements to my computer.

  I bought a copy of Windows 7 Home Premium 64-bit.  I installed my old hardware running, but found Windows 7 either too many resources.  When there was enough money kicking around to upgrade my computer a few months later I did (new card mother cpu and ram).  Windows 7 would not start normally or in safe mode, my old installation of XP would not boot normally but would start in safe mode.  So I reinstalled Windows 7 with a clean install (reformatted my hard drive) and it works fine but now it won't turn on!  It says that I have to type in a different product key because I typed the product key cannot be used to activate Windows on my computer.

  I understand the need to fight against piracy, but the thought that I can't upgrade my computer without having to buy another product key is ridiculous!  There are solutions to this problem?

  Activate manually.  It is detect your previous installation and seeing this as an attempt to install the product on another computer.  It is a common phenomenon.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate the operating system.

  I hope this helps.

  Good luck!

  If this does not work (these procedures are for Vista, but I guess they will work with Windows7), and then republish your questiion in Windows7 Forums:http://social.answers.microsoft.com/Forums/en-US/w7install/threads where they can provide the procedure for this OS if it is different.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• License key does not work after a clean install of Windows 8

  I bought windows 8 pro shortly after launch, but 5 days ago, my pc decided to die, I now have a new pc which came with no os, I did a clean install of say 8, unfortunately for activate windows, I need a license key, the one I have is saved to my pc now retired cannot therefore have a new NTO generated for free or what I have to buy a new one?

  To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

• Disk DVD - RW does not work after a clean install of Win7

  I did a clean install of Win7 on my Acer Asprire 5738 yesterday, and I noticed this particular problem today, I needed to use the DVD player, which is a Slimtype DVD A DS8A3S ATA device.

  The problem so far, is that it is a law to disappear each time the hard drive turns down, so, for example, I put a game disc, for the installation, the drive appears in my computer folder, the drive will turn up, and start the installation until it, lets say, I need to insert a license key... the disc will spin down and slowed down and then will disappear from the system.

  I checked the properties on the material tab and it shows 2 devices, one is the device which is installed, that is, Slimtype DVD A DS8A3S ATA

  Manufacturer: CD-ROM Standard

  Location: Location 0 (channel 1, Target 0, Lun 0)

  Device status: unknown

  under this scheme, the other is listed as a WDC WD2500BEVT - 22zCT0 ATA as a type of hard drive

  Manufacturer: (standard disk drives)

  Location 0 (Channel 0, Target 0, Lun 0)

  Status of the device: this device is working properly

  I don't know what is the 2nd unit, that I have only one hard disk, and also, I do not know why the transition from vista home to a full HARD disk format and then install win7 would cause such a problem...

  any help would be greatly apreciated

  Hello Nostrildarmus,

  I suggest that you run the CD burning, DVD and Blu ray discs convenience store which will automatically diagnose and solve common problems related to CD/DVD players.

  a. open the reading and burning CD, DVD and Blu ray discs store by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting.

  (b) in the left pane, click Show all and then click on reading and burning CD, DVD and Blu ray discs.

  You can also follow the link below and run them the Fix - it will automatically correct problems associated with CD/DVD drive:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Netflix in MCE does not work after a clean install of Vista Ultimate

  Having had a lot of problems trying to Netflix in MCE works, I decided to start over.  I did the following:

  1. installed new, clean Windows Vista Ultimate w / SP2 x 86, directly from MSDN Downloads.

  2 set up the wireless internet connection.

  3. start MCE.  Internet configuration and automatic downloads.  A ran 'download now '.  (How know when it is done?)  Waited a while.

  4 restarted MCE.  Netflix is there.  A run 'Install' to Netflix.  After it installed Netflix MCE and Silverlight, MCE restarted.  No Netflix! Tried the option 'download now '.  No effect.

  5 download and install the cumulative patches for MCE.  Restrarted machine and Netflix.  No Netflix.

  6 left MCE.  As an administrator, run "start/wait mcupdate-u - nogc ' from the command window.  No Netflix.

  I tried this twice, so it is reproducible.  Microsoft PLEASE help!

  Thanks for the reply.  After much gnashing of teeth, I finally got Netflix for work in MCE.  My current problem is, when I try to connect to Netflix to MCE, I get the error "there was a problem of signing.  Check your connection Internet is working and try again. »

  I tested my Internet from MCE and it works.

  I thought that maybe the patch you suggest would help, so I applied it and several others listed on the downloads page (KB957209 KB958653, KB977864, KB932818, 941229 KB967632, KB982480.)  I then followed the patches with the additional steps above.  I can not connect to Netflix to MCE - same error.

• Network drivers are not detected after a clean install of Windows 7

  Original title: reinstall Windows 7 ultimate

  Hi I have just reinstalled windows 7 ultimate 32 bit on my laptop and does not detect the driver from the internet. How can I fix it...?

  Hi Mosochapis,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of brand and model of the laptop?

  2 do you have wireless or wired Internet connection?

  I suggest to install more recent network driver on the manufacturer's Web site and check if it helps.

  Check out the link:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Re: Satellite P305-S8820 - FN key does not work after a clean install of Windows 7

  I have a problem with a Satellite A210-103. After installing the Toshiba value added package (cards Flash Support Utility) unavailable for A210, reboot, reboot Toshiba Flash Cards and by pressing the FN key several times the problem still exist.

  There must be other reasons why so many users have problems with the FN keys.

  John

  Hello John

  This with the FN keys can be really problematic. I got my Satellite A300 luck with FN feature.
  What you can try is to check if the Flash memory card support utility is available for your laptop model, or maybe A200.

  Try to install, reboot the laptop and check again the feature keys FN.