V1.0.5.64 official F/W 2.4 Ghz cannot connect, rejects P / w.

Similar Questions

• No Service on IPhone 6s

  A little over a week ago, my EA signal became weak or often no Service. I was with at the time, the people also had with EE, signals full while I had none. Has not improved since then, my signal. I called EE which has conducted audits at their end and everything was going well, and proposes a whole hand problem. I tried the stuff "off / on", withdrawal of the SIM card and even a reset factory and nothing.

  Any ideas? Thank you

  Hello

  Follow the instructions here:

  If you cannot connect to a cellular network or cellular data - Apple Support

  If the problem persists then, I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in order to have your iPhone active and, if recommended by Apple, repaired under warranty:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Photo of the Apple store closed

  When I try to buy my Photo book, I get a message that the store is closed for updates and try again later?

  Hello. As official Apple plans:

  1. make sure that you can access the Internet on your computer.

  2. see if your computer meets the minimum system requirementsiTunes.

  3. check that your operating system is up-to-date.
  4. in the MenuBar at the top of your screen, click the Apple () > software update. If you don't see a software update, choose Apple > App Store, then click on the updates tab in the window of the App Store.

  5. make sure that you have recent versions of iTunes and Safari.

  6. If you have a firewall, your settings may not allow you to connect to the iTunes Store. Learn how to set up your firewall.

  7 connection problems are sometimes caused by keychain issues. To reset your keychain, use S.o.s. Keychain.

  8. communicate with your ISP Internet and if sure these ports and servers are enabled for your network.

  If you cannot connect to the iTunes Store - Apple Support

• Satellite L50-C-215: failure to install Win7 via the USB port, pb and toshiba.bg bug ' workshop

  Satellite L50-c-215 is a laptop sold without optical drive or OS.

  We bought it today.

  
  Questions:
  -We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site
  -While watching the Web from Toshiba site, a link says 'no system operating inside'. Link is corrupt
  -2 "official" companies are listed for the Bulgarian Web from Toshiba site are wrong: nobody told on the phone that they are not official support from Toshiba

  
  Technical questions:
  -J' tried to put several Windows 7 ISO on a USB key, using the official Microsoft tool and Rufus, but I got error that says "CD/DVD Driver is missing."
  -In some forums, it is said that test the spirit of the thing that a USB 2.0 can solve if USB 3.0 will fail. Each USB failed.
  
  Sales question:
  -Although the European commercial law says people have a little more time to restore a non-working product and be reimbursed, when we returned to the computer at the Technopolis shop a few hours after the purchase, employees told us ' problem is not hardware: we do not cancel the sale, we can take over the computer and give your money. " "Problem is software: see with Toshiba.
  The best we could get was the address of a computer service non-Toshiba to try to ask if they might be able to install Windows 7

  
  I already spent half a day working on it
  What can we do to install Windows 7 or get the computer returned and refunded?

  Tried Tnings at night:

  -> Intall Ubuntu 12.04: card WiFi can't work, no Ethernet cable to update from the Internet

  The drivers are on the website of Intel, but solution install require packages to download on the internet, not USB

  -> Last Debian version: error starting in the command line

  -> 14.04 installed, Ubuntu box checked during installation to use the Intel Wifi device
  Re: software WiFi cannot connect. Spent a few hours on forums to try to understand how to install the Intel USB drivers. Does not work.

  For people who want to buy this model, try to get a player of optical disk to install Windows, a good cable to Linux, update or be prepared to spend time and money for the service simply be able to use the computer.

  Oh, another thing: Technopolis company is not able to provide you with enough information before buying a product. I will not say that they rip off, but almost: especially to overseas buyers, buy refusal refund to anyone who is not able to have an argument that was screaming in Bulgarian with them.

• I already have a wireless router...

  I already have a router provided by my ISP. Can I use my Airport Time Capsule to act as an external hard drive wireless and run time capsule without changing my current router?

  JB

  You can use the time Capsule... IF... the time Capsule will be connected to the ISP router using a connection permanent, fixed Ethernet cable. The time Capsule cannot connect wirelessly to the wireless ISP.

  After you have connected to the ISP router using an Ethernet connection time Capsule... If you ask about backup on the Capsule of time using Time Machine on your Mac, you will need to backup using Time Capsule wireless... If you want the process to be officially supported by Apple.

  You might be able to save on time using the ISP wireless Capsule... but if you have backup in this way problems... There will be no help from Apple.

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.

• WiFi don't work on broadcast A300-144

  On XP SP2 installed all the official drivers, but the wireless connection cannot connect to wpa - psk. (all passwords are good)

  Maybe the problem in the old version of the wood? (v2.40).

  Update the bios version I have to download update from: http://support1.toshiba-tro.de/tedd-files2/0/bios-20080730095756.zip and Bios.bat just run?

  PS Where can I get drivers fo AHCI on my laptop?

  Thank you.

  Hello

  My friend has a similar machine and the BIOS update improves the WIFI connection, so I try firstly the BIOS and then check if more recent drivers from the Intel Web site.

  The AHCI drivers can also be downloaded on the website of intel.

  Welcome them

  P.S.: I would also check if you typed the password correctly.

• Re: Satellite L770 - unable to connect to the WiFi N project

  I can connect when I set my router "mixed b/g/n" but only 54 Mbps but if I change the router 'one n' while I can find the network but cannot connect. My most old laptop, Satellite L500D can connect mode "n" without any problem. These are the only devices connected wirelessly and the problem persists if old pc is turned off. In the interface of the routers, I see my connection has / g, older Satellite mode shows n mode as it should.

  Drivers are updated, router D - link DIR - 615 with the latest firmware.

  Hi JP75,.

  What exactly happens if you try to connect to the router N project? You get an error message or what happens?

  It is not easy to say why the works of N doesn't correctly project but first of all, I would try a driver WLAN official Portal of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  Is it in eco mode / normal too?

• Sony QX10 do not work on android lollipop

  When you try to use Sony qx10 with NFC he doesn't don't work properly on android lollipop. Hade Sony AS30V works.
  It is not possible to manually enter the WiFi key is. Phone or app does not accept the key. It worked on KitKat.
  Steps to reproduce:
  Android nexus with lollipop device (nexus 4 and nexus 7 2013) used.
  Last official game memorues app.
  Try to connect using NFC, expires.
  Try to enter key and connect manually. Without success.
  Tried with Sony hdr AS30V and it worked.

  Thanks for the reply. It was resolved by resetting the camera. It somehow stuck in a State where he did not accept all direct WiFi connections, but self-proclaimed as having an open connection.

• BlackBerry dead Z10 Z10...

  Hello

  I had my Z10 for about 3 years. From 2 days I can use it as a phone, but not for anything else. Link to Blackberry cannot connect. I tried the following: remove the sim card, reboot, software update, remove link BB and reinstall, taking the battery overnight... It starts and stops correctly, but I can't text, parameters of control, using the browser or all apps.

  I called my provider (Fido) and describes the problems and said that I have a dead phone (likely ROM).

  As Fido do not BB phones, and I love my Z10, I really hope that someone can suggest something other than swearing. Is there a sequence should I follow to reinstall software/restart + / sim, card + / connected to my PC?

  Hello and welcome to the community!

  So nothing 2 days ago? An operating system may be updated? A new application? Fall or physically damaged? Something else?

  Otherwise, the thing to try is a clean OS reload.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know your BBID identifiers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• ID of BBM blackberry

  When I put my I had, in this new phone, he asks if l want to transfer contacts d who said only to realize joint l d No. with dt of my daughter. I then tried to remove it, but it won't. After a while, he brought a message from locking. I tried wiping does not work. What am l doing.

  Hmmm...

  You say you were able to remove the lock of ID, but you cannot connect you now because as your ID (username) has been removed from the database of Blackberry?

  If this is the case, then simply recreate the ID, although, truth be told, most likely you won't get contacts and the associated applications back, but at least the phone could be used, the way it was supposed to be.

  If on the other hand, the phone is always locked ID, you have 1 of the 3 options:

  It's sad to say, officially, it is not that you can do if the phone is locked to ID and make a wipe wouldn't be the same questions help.

  (1) sell the phone on ebay or similar sites and invest money in getting another. Not an option very uncomfortable, I know, but...

  (2) communicate with your carrier or the place of purchase (assuming they are approved vendors/distributors), they should be able to pick up the phone on your part, send it along with your proof of purchase BlackBerry and BlackBerry could remove the lock or send you a replacement unit.

  How long would / could take, is conjecture of the entire organism.

• HP laserjet p1007 printer driver not install on the 64-bit windows 7

  [Window title]
  Add a printer

  [Main instruction]
  Connect to the printer

  [Content]
  Windows cannot connect to the printer.

  [^] Hide details [OK]

  [Extended information]
  Operation failed with error 0x00000002.

  Have you downloaded the correct driver official website?

  If you have Windows 7 32 bit, download it from here.

  If you use Windows 7 64-bit, download it from here.

  Good bye.

  P.S. don't forget to run the installer always as an administrator!

• BROWSER blackBerry smartphones don't DO NOT WORK

  This is getting quite frustrating. I get that cannot connect to the server, please try again error and it takes forever to get even the google home page to load. What should I do?

  OK thanks... you came very close to what I need... except just saying 'mistake' in regard to music downloads... but, any...

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you need to get in touch with your service provider and insist that they honor the formal support that they are contractually required to provide you with. Do not let you fob before having 100% solved the situation. If they tell you to contact RIM, don't let them not on the hook, then either... insist that they tell you exactly how you should contact RIM. If they say anything OTHER that they will increase you rim (for example, if they tell you to independently seek the support of the RIM), and then accept it. Only through an escalation of your service provider can you receive all official support from RIM.

  Looks like they have made significant changes to their network... and they must ensure that their paying customers will continue to receive the services that they pay.

  Good luck!

• BlackBerry OS Smartphones Blackberry Bold 9900 software update from version 7.0.0 to version 7.1.0

  HELO everyone

  I tried to upgrade my device software Blackberry Bold 9900 version 7.0.0 to version 7.1.0 but with difficulties. I tried to use the Blackberry Desktop Manager, but there was no version 7.1.0 figure among the available updates. Even when I tried to do it directly through the official website of Blackberry, also Version 7.1.0 was not shown. Finally, I tried to do the update with my phone directly by going to: Options > device > software updates.

  It shows my Version 7.0.0 Bundle 2406 current and available in a version 7.1.0 Bundle 1149. But when I clicked Perform Update to download the new version, he has shown preparing to download but then displays an error message such as "Download cannot continue because your device cannot connect to the update server using the following methods: Wi - Fi.

  During this time, I did not upgrade with a Wi - Fi connection because I have an active blackberry data subscription of 2 GB of my mobile operator.

  Please I need help on how to perform the upgrade from version 7.0.0 to version 7.1.0 with the last packet.

  Thanks to you all I'm waiting for your helpful solution.

  Hello and welcome to the community!

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Cisco security agents - Solaris zones

  Hello

  If anyone can help in question with the CSA?

  Are there official information that Cisco Security Agent cannot be installed on Solaris zones. Information on versions of Solaris, but not on the areas of release notes.

  Please visit the following link:

  The requirements for Solaris systems officer

  http://www.Cisco.com/en/us/docs/security/CSA/CSA601/Release_notes/CSA601RN.html#wp196425

  SongL