V15.3.17 Syaptics PS/2 Port ClickPad

Similar Questions

• Envy 15 t-3000 touchpad failure

  Envy 15 t-3000

  Failure of Touchpad: touchpad is no longer operational; turned off/turned on light TP (and tap for her area) does not work; the TP does not appear in the device under "mice and other pointing devices" Manager as it used to. I ran the latest drivers (sp56909) TP unanswered resulting. I can't find any help through the HP Support Assistant

  When running it I noticed that if I click on view devices in Device Manager, Synaptics PS/2 port Clickpad appears with a yellow exclamation mark on it.

  So I deleted the drivers and the DevMgr.Then device, I ran the Setup again SP56909 driver. The installer showed complete, but now, the TP does not show even in hidden mode. I tried to install the driver of SP56909 once again: no difference.

  Hi mickietee,

  Try to perform a hard reset on your laptop.  Take a look at this thread and let me know if this can help,

  Good luck!

• HP ENVY notebook - m7-k211dx: Synaptics ClickPad will not be disabled. Reactive after reboot.

  Whenever I have disable Synaptics ClickPad using the option 'disable the internal pointing device when external USB pointing device is attached', it works fine until I restart. When I return in the options, it is still once unchecked. I tried to turn off the drivers, but they are grey, but wan't to avoid this meathod ultimately because it is not ideal for me.

  Action taken:

  • Update to the latest drivers.
  • Disable the cache and history cleaning software.
  • Try different USB ports.

  (That's fine, but when I restart it unchecks itself)

  

  Thanks, Mike

  Mike,

  Sorry it took me awhile. I have all the "Nitty Gritty" details if you want, but the "net-net" is the update of this option writes in "HKCU" and there is a "HKLM" in the register which is default location and never changes.

  I managed to do that work by changing the corresponding section of HKLM in the registry. It not be "rejected" at each logon as the HKCU section seems to be. The ICON remained "hidden" which is what I wanted to happen with the change below.

  Try this and see if it works for you!

  1. open Regedit.exe

  2. go to the location next to the register:

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh

  3. Note the REG_DWORD value named - TrayIcon

  4. the numbers of data match this way:

  0 x 0000001 (1) DEFAULT = which is the active ICON

  0 x 0000011 (17) = animated ICON

  0 x 00000021 (33) = disabled ICON

  5. change it to what you have been wishing, in my case it was 21 Hex or Dec 33 for DISABLED ICON.

  6. exit Registry Editor

  7. restart to test or log-off/log-on to test.

  NOTE: If REG_DWORD is not here, it is probably safe to add it, but in my case it was already there it was just the value 1 and never changed when I changed the settings. Only the section HKCU did who has always retired at the end of my session when I disconnected or restarted.

  Let me know the results! I hope it suits it for you!

  Edward

• Acer Aspire V15 Nitro replace SSD HARD drive

  I bought this laptop in March 2015. This laptop comes with 1 TB of HDD.

  I wanted to replace the HDD SSD but I called the service center (Service of Highpoint), Acer technician told me that there is no way to replace with SSD because the port is different, any SSD can also compatible with this laptop HARD drive port.

  This make me very confuse because I search in google, replace with SSD is quite possible.

  So I'm here to ask for advice. Hope can get a response. Thank you.

  Published:

  My laptop model: Acer Aspire V15 Nitro Black Edition (VN7 - 591 G)

  -Core i7 4710Q

  -12 GB OF DDR3 RAM

  -HARD DRIVE 1 TB

  -NVIDIA GeForce GTX 860M

  you have 2 options on your laptop:

  (1) switch for one SSD 1 TB HARD drive

  (2) add an SSD on form factory M2 on its location (top-left, near the fan), so you can have installed SSD and HDD

  the second option, other users have done so, and sometimes they have had some problems during the recording of the SSD as first boot device (or window Boot Manager), since the BIOS tries to boot from SATA port.

  You can force it by pressing F12 at startup and select the appropriate boot device.

  It is up to you.

• Acer Aspire V15 not charging

  I have a fairly new Acer Aspire V15 (I think I got it a month). He is in charge is no longer at all.

  A few days ago, it seemed that the connection of the charger may be loose - he was charging intermittently - I could move there and find a place where she would charge. Today, it seems that he is no longer a connection when I plug in the charger.

  I read somewhere to take out the battery to see if the laptop would only go on the charger, but it doesn't look like the battery can be purchased.

  Someone at - it recommendations for me?

  Thank you!

  He's going to need a new charging port. If he is stirring, he broke loose from the motherboard. Which is usually caused by someone tripping over the cord or hit the plug against something. Unless you can do it, you should check in for warranty repair.

  http://customercare.Acer.com/customercare/default.aspx

• Bug in v15.2.19.0 UltraNav regarding two-finger double tap gesture (SimpleTap)

  Hi all

  Laptop is a T510 using Windows 7, 32-bit.

  Yesterday, I upgraded the UltraNav driver to v15.2.19.0 because of the wheel of scrolling to a bug in Internet Explorer, but a new problem has unfortunately appeared. I use the SimpleTap program to facilitate access to public services, but after this upgrade, the gesture type twice two fingers is no more launch SimpleTap. I tried to go through all the configuration in the UltraNav utility, tried deactivating and reactivating, without a bit of luck. Suddenly, I found that if I did a tap triple two fingers, the application launched.

  I would like to know if others can confirm this issue, so that we can Lenovo to fix it-thanks in advance.

  Concerning

  Kenneth

  @znoonz,

  Problem solved through 15.3.2.0 driver

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-66898&medium=RS...

  [Problem resolves]
  -Fixed a problem where the answer click drag on ClickPad wasn't good.
  -Fixed an issue where two-finger Double Tap may not work.
  -Fixed an issue where the TrackPoint setting as 'use of advanced features.
  only' was kept not after standby or hibernation.

  JMT

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Port SSL messages to jabber/gtalk does not stick

  Hi-

  It is not purely associated with Sierra, as happening on El Cap.  The port default to Google talk is 5223, which is blocked in my company.  I had previously configured messages to use 443, which is not blocked (and supports gtalk).  But at some point during the last couple months, gtalk stopped linking to work.  When I looked at it, she returned to 5223.  When I try to set it to 443 (disable the account, change the port, re - enable the account) everything looks good, but at the time when I try to connect, it turns to 5223.  I tried to delete the account completely re - create, both as a right has Jabber (port 443 from the beginning of setting) or as a gmail e-mail account and then change the port later.  Nothing does.

  Thinking perhaps it was corrupted prefs, I deleted all the * prefs to iChat and everything that seemed related to google or jabber.  No change in behavior.

  Anyone seen this before?  Help to solve if possible of love.

  Thank you!

  Hello

  Currently I use port 5222 and without SSL and my account settings Google is for applications that are less secure.

  I can't use 5223 or even443 with SSL on.

  

  21:01 Tuesday; October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone headphone output port IS not working do not

  helmet SE iPhone does not work. Bought new Apple earbuds and determined this is the port the atria. Phone is only a few months old. Help, please?

  This morning, I installed the last 6update iPhone: iOS10.0.2

  My headphone stopped working this afternoon (after a few hours of use).

  I couldn't understand anything to make them work again. Returned and the phone and the headset are working again.

  Update Nevermind the last version of iTunes Music *. Each update is a version longer than music/iTunes

• Lightning iPhone 6s port has stopped working

  I connected my phone to load as usual and he did nothing. Plugged into my Mac and iTunes doesn't. I tried three different lightning cables who all worked but nothing now. I tried to plug it into the wall charger usual USB and two Macs.

  In my view, that the port of lightning on my iPhone is damaged or dirty. I also tried cleaning electronic contacts spray cleaner on the connector of the cable and it out of the port by inserting several times. Also tried out blow out with compressed air in case it was just dust. Nothing has worked.

  Any help?  Should I bring?

  Thank you

  It seems to me you've done as much as you can and it would be good to have Apple to assess.

• air port utility

  Hello!

  I want to change the name of the base station and the password for it, and I use air port express 802.11n (2nd generation).

  The hard reset, soft reset in express air fitting is long so don't want to use it.

  Is it possible (using as book Mac - latest Mac OS Sierra air.

  Thank you!

  Hi there, tygb!

  Thank you for joining the communities Support from Apple! It's a big question about changing the name and the password for your base station. Read this article here with the steps to use 6.x AirPort Utility: change your base station name and the password. This will not give you to use the utility to make the changes.

  Have a great day!

• iPhone port 7

  This is my photo check ok iphone port 7 please are the pins ok but not folded

  Is something happening that is causing you to believe there is a problem with your port?

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?