Valid values for the priority queue screen.
Where can I find the range of priorities in the documentation, and what constitutes a higher priority, more or fewer?
What is typical. that is, there are many functions as function calls push global screen requiring a priority value. I don't know what values to use.
Thank you
-Donald
I guess than Integer.MAX_VALUE
Tags: BlackBerry Developers
Similar Questions
-
valid values for ToDo.PRIORITY
According to the API doc v4.5.0 and priority values of the field in a ToDo item:
"A value of 0 indicates the highest level of priority. A value of 1 indicates normal priority. A value of 2 indicates the priority level lower. »
But test with the pack of components 4.5 and its default Simulator, I have values:
HIGH = 1
NORMAL = 5
LOW = 9
Confused, I looked in the doc v 4.7.0 API and found this:
"... The priority is a value from zero to nine. Zero indicates an undefined priority, we specify the highest and nine priority the lowest priority. ..."
That would explain it, but can I be sure that 1-5-9 is valid for all versions of device software 4.5.0 and higher?
What would demonstrate application of the tasks of the BB if I create a task manually and take other priorities 1 through 9?
The documentation in the 4.5.0 and JavaDocs below is incorrect. This has been updated to version 4.6.0+.
Here's are a graphic on its operation.
PRIORITY specified setInt () /addInt)
PRIORITY returned by getInt() PRIORITY to the tasks Application 0, 4, 5, 6 5 Normal 1, 2, 3 1 High 7, 8, 9 9 Low -
Location of the table "Data store path Selection" database and input valid value for the Round Robin
Long history, work paths peripheral to the equivalent of "Round Robin" (VMware) programmictally change as seen in vCenter - Volume Properties-> manage-> trace selection policy paths.
Struggling to get the value to change through scripts. Think that it requires the value as expected in the datamodel vcenter. Find it by inspecting the paintings have not yet
Thanks in advance
The values on the parameter - MultipathPolicy are: fixed, MostRecentlyUsed, RoundRobin, unknown
This changes all policies to roundrobin on a specific host
Get-VMHost
| Get-ScsiLun -LunType disk | Set-ScsiLun -MultipathPolicy "roundrobin" ____________
Blog: LucD notes
Twitter: lucd22
-
Is there another way the valid values for arguments?
Hi, I need to know if, when you use a layout that dynamically changes the valid values of the argument can change the valid values?
There is an argumentValidValues(), but when I put:
Table = argumentValidValues()
nothing won't change, does anyone know if this is possible or is there another way to do it?
Thanks in advanceYou can refresh the valid values for an attribute (usually included in a list combo box drop-down list) in the presentation of the subject of a BPM if you call the logic:
Note that this logic must have double
quotation marks that surround the name of the attribute
refreshValidValues ("customerName")This means that the attribute (in this example customerName) has its valid values from a 'dynamic method' instead of a 'static' list
When the logic above is performed, the method associated with the attribute runs automatically and you should see your values in your dropdown menu dow to cool off.
Be sure to include the double quote characters in the logic. You have to type:
This logic will NOT work because it does not have double quotes
refreshValidValues (customerName)This is a common mistake and will cost you one day of scratching your head while you try to figure out what went wrong.
Hope this helps,
Dan -
is not a valid value for parametric role
Hello
I get following exception during execution of a piece of code
Exception: Instance ' / TestProcess1#Default-1.0/2/1' is not a valid value for parametric role 'customer '. has been launched on multiples in the /TestProcess1#Default-1.0/2/1 instance
The code as follows (Pl. Note: all the logMessage function properly):
role of role
logMessage "Hello Split started working: Desc:" + this.description
+ ' Status: ' + this.status
+ "Priority:" + this.priority
using gravity = SEVERE
Role = Role.findParametric (name: "Customer", the parameter: "North")
logMessage "role:"+ role.name.
using gravity = SEVERE
participants as a Participant [= role.participants]
for each usr in participants don't
' logMessage"Participants:" + usr.name
using gravity = SEVERE
copy = clone (this)
Copy.participant.Next = usr
end
Pl help
Kind regards
SDGHello
I think you probably thought about it now, but if you make the changes I put in bold in your logic below you should be ok:
role as Role
*// You need a "location" instance variable with the parametric value set before it reaches*
*// this Multiple activity*
logMessage "The location used for the parametric role will be:" + location using severity = DEBUGlogMessage "Hello Split Started to work: Desc :" + this.description
+ "Status :" + this.status
+ "Priority :" + this.priority using severity = DEBUGrole=Role.findParametric(name : "Customer", parameter : location)
logMessage "Role :"+role.name using severity = DEBUGparticipants as Participant[]=role.participants
for each usr in participants do
logMessage "Participant :" + usr.name using severity = DEBUGcopy = clone(this)
copy.location = location
copy.participant.next = usrend
Dan
-
Invalid value for the cursor.xscale property
I am creating a property node for "cursor.xscale", but when I try to write a numeric entry in it, it does not accept any value (at least all the values that I tried). An error indicating that the value is not valid. What is a valid value for this property and what exactly makes this this property (not a lot of documentation available I guess)
the XScale property is a number from 0 to n - 1, where n is the number of scales X you have on your chart (usually 1).
Here is an example of chart scales of X 3 and 2 cursor associated with the scale 'Time' and 'Time 2 "respectively.
The reason why it is important, it is that the X values read you in the column 'X' cursor will be different depending on whether the cursor is associated with one or the other ladder, as you can see above.
HTH.
-
Essbase Warning (1023135) skip certain values for the replication
Hello
When you replicate the complete data of a partition Essbase BSO in Essbase ASO (11.1.2.2),
thousands of warning messages are logged in the application log:
"Warning (1023135) skip certain values for the replication.
The partition (data of level 0) valid and the counties of cells in each area are exactly.
No idea of the possible causes and consequences?
Thanks for your help.
Philippe CuissetHello
Thanks to the contributors.
The contours of the source and the corresponding target, with the exception of 3 members with different names in the source and target.
My score has 2 spaces for these 3 members. Mapping advanced between the names of source and target members has been set in a field, but it was missing in the other (not detected by the validation of the partition!). I don't set it too and now no more warnings.Philippe Cuisset
-
Definition of default values for the inputs of button and the cursor?
Hello
I use Labview 8.5.1 and have a few entries button and zipper-type on my front. How can I set some of them having specific (as opposed to zero) default values when the VI is executed?
Thanks for the help
The default value for the type of slide of entry (or button).
Right-click on the control.
Select "Operations on the data" > "default to the current value of doing."
-
How can you specify the default value for the undefined array elements
According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.
I assume that there must be a way to specify the default value for later, but I can't find it anywhere. Any ideas?
I know that you can drag the item out of the table container. Change the default value on this scalar element. Then drag the item in table tank.
-
failed to create value for the message Analyzer "at line 54.
I get the following error, can someone please?
failed to create value for the message Analyzer "at line 54.
Hi ejpeppjep,
Check if this article helps you fix the problem: http://support.microsoft.com/kb/823768
If the problem persists, we recommend that you try the following steps and check the result.
Step 1: a. Click Start, click Run, type cmd and click ok.
b. at the command prompt, type sfc/scannow and press ENTER.
c. once the analysis is complete, restart the computer and check if the problem persists.Note: You will be asked to insert the Windows XP disk, if a file is missing.
For more information, see Description of Windows XP System File Checker (Sfc.exe)
Step 2: If the problem persists, restore the computer to an earlier time
see How to restore Windows XP to a previous state .Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hallo,
in my tables and forms (created from VO istances) there are some areas for which, insert and update, I calculate and set the value programmatically when a record is created or updated.
In some cases, I put the necessary values using the 'CreateWithParams' in the workflow diagram...
In some other ones, I associate an action, a bean, a created button drag-and - drop operation 'CreateWithParams' of the istance VO...
public String cwpButton_action() { BindingContainer bindings = getBindings(); OperationBinding operationBinding = bindings.getOperationBinding("CreateWithParams"); // here I calculate and set the needed params // ... Object result = operationBinding.execute(); if (!operationBinding.getErrors().isEmpty()) { return null; } return null; }
And is ok if I can calculate the values for the attributes before a new record is created.
But the approach that I have used to define the attributes (for new and updated records) whose value should be caluclated after the user has filled in the fields, before committing to the database?
Thank you
Federico
Federico,
Let me first tell you that our code is activity masking errors (the cache instead of working on them).
- If (! operationBinding.getErrors () .isEmpty ()) {}
- Returns a null value.
- }
- Returns a null value.
This means that you do not check the errors at all. You must at least print a log with the error message, you receive, if you get one!
To solve your problem, you override the method prepareForDML() of the entity or entities in question. You can calculate and set the necessary attributes until they get engaged in the doDML(). Do not use doDML() because it is too late in the life cycle.
Timo
-
When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?
Hi kevin7frg,
You can go to "file > create > scanner > configure presets PDF»
The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.
Hope that helps.
Kind regards
Ana Maria
-
API no valid key for the work day
An error occurred during the recovery and send documents EchoSign.API no valid key for the day's work...Kindly help?Hi Mary,
Instead of the API key, I suggest you use the key to integration as key of the APIs have been deprecated. If you have a global account, then go to account > Adobe DC eSign API and click integration key link to create the key.
Kind regards
Ana Maria
-
Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.
Hi JFO58,
I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs
Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions
Kind regards
Rahul -
Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.
Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.
I was wondering if I saved a layer somewhere and set it as a default value.
If you group the layers, you will be left with a single layer, thus spreading your concern.
Suggest that you do the following:
- Make sure you have the latest drivers for your printers
- Reset the default preferences.
Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.
Items nearby and let regenerate the file.
Maybe you are looking for
-
I don't remember my address of mail electronics thunderbird. Just put the account and somehow forgotten login information.
-
No communication on version 2.2.4
In the latest WebOS updates, it still talks about WebOS 2.1 but last night I upgraded to 2.2.4 can you chenge the details here and we tell more about what has changed in this new version?
-
Satellite L550D - cannot match the the part number on the upgrade DVD Toshiba
When I try to run the Upgade Toshiba DVD he choose manually the model of my laptop and gives me two choises: L550D PSLNJE and L550D PSLNSE.My room number, however, starts PSLP8E, which does not quite another. Should I just choose one of the two optio
-
Can I can use Skype through my window without any browser plug-ins or software?
Hello I am thinking from using Skype, Is it possible in which I can use Skype through my window without any browser plug-ins or software?
-
Access denied when accessing Windows 7 Windows XP share
I have a Windows 7 system that is in a workgroup. I shared the root of C with a share name of called CDrive. I am trying to access the share with a Windows XP system that is part of a domain. On the XP system command prompt, I call net use z: \\win