Validation of input field in the OPA for the optional input fields

Hi all

OPM, I have a text input field. To do this, I wrote an entry of Validation Using Regular Expressions to allow the alphabets and numbers.

Also, I did the same field as "optional-always.

Then in debugging, it is always check for the Input Validation and displaying the error message when I do not enter any value.

How can I request an entry for an optional input field Validation.

Thank you

Siri

I'm not an expert on regular expressions, but my guess here is that your regular expression must change. If an empty string is an acceptable entry, then you should allow for her in the regular expression. I don't know the regex code for this on the top of my head, but I hope that you will find quite easily with a few searches on Google.

Tags: Oracle Applications

Similar Questions

  • set the maximum size in the Options for field text for a field in bi publisher RTF

    Hi all

    How to set the maximum size in the Options for field text for a field in bi publisher RTF.
    I have a RTF which is a field I need to add a validation condition, but after the addition of certain conditions in the text to add tab helps, it does not after a certain length, how can I increase the unlimited length, please help me on this

    Thnaks

    You can try to keep the validation condition outside instead of form fields

    as do

    or

    If you want to use form fields break your calculation and use 2 or 3 form fields so that you have any calculation of form fields.

  • What are the options for 3 bit for Hw_Arm_Sel in PCI-6601 field

    Hello

    I'm programming our own driver to operate the PCI-6601. For our application, we need option arms material. I know, it is possible to use 2 counters for this, but NEITHER-TIO also supports hw_arm. Although it is not explained in the registration document at all, after some tedious verification in the DDK examples I found that the pieces are in the Gi register metering mode. I know that the position of the HW_enable as well as the position of the 3 options sellect bits PIN. What I don't know is what are the options of 3 bits for Hw_Arm_Sel field. I contacted the support NEITHER, but received no support. How can NEITHER sell boards and when a customer who doesn't use LAbview or Measurement Studio, or DDK, but implements its own driver is then so arrogant at least of NOR? Also, how can OR publish only a part of the records of the Board of support and when a customer contacts and request for some records do not get supported at all? I can't predict the missing records, and he is professional enough to document comes in part from records of 660 x Instruments. And, upon request, you have nothing.

    I hope that someone from the community are aware of this Hw_Arm_Sel 3 pin option. Otherwise, there is just one option of the error and the trial. Or simply throw away the jury.

    Dr. Kirco Arsov

    Hey, sory for the delay in my response. It works and it works very well with the description of Joe and Joe, thanks for your great help. I greatly appreciate. Now we finally also have this option as we wanted it and it works fine.

  • Is it possible for someone to insert a logo when you fill out a form to fill out? I'm looking for all the options under the button 'add a text field.

    I have created a form to fill out that is a contract, but I need a way for the person who is to fill the form to insert their logo.  Is it possible for someone to insert a logo when you fill out the form to fill out? I'm looking for all the options under the button 'add a text field.

    It is not possible within a text field, either. If they have Acrobat, they can use the built-in under Tools - editing content Add Image tool.

    If they drive XI or higher, they can use a button form field you will need to set up for them, but the image must be in PDF format.

  • Is it possible to use < af:message > to display the validation model adf instead of the default note window

    For any component input, validation that we created at the level of the entities attribute are executed and if any validation fails, the messge is displayed in a window of default note on the component of the.

    Is it possible to use < af:message > to display the validation model adf instead of the window of default note for the corresponding component in a fragemnt jsff page?

    I use JDev 11.1.1.6.0.

    Thank you

    Jean Bayard

    Michelle,

    I have good news. I was able to reproduce, locate and bypass your problem.

    The problem is the following:

    works very well in JSF pages, but it does not work in JSF fragments (which are part of a glued TaskFlow, what is included in a page parent as a ) because ADF when executing a miscalculation of the value of of 'for' - attribute when it is part of a region BTF. For example, suppose that the has id = "it1" (as it is in your JSF fragment above) and this TaskFlow defined in included as a with id = "r1" in a parent page. Then the internal ID of the input text field will be 'r1:0:it1', but at runtime, the framework will set the value of 'for' - attribute to the 'r1:it1' (which is wrong) instead of "r1:0:it1" (which is the correct value).

    You can work around this bug by specifying:

    Instead of

    in your code above. In this way the framework will make up the correct value for the 'for' - attribute at run time and will not work correctly. Don't worry the caveat against a non-existent ID in the JDev source code editor.

    You must do this trick only in fragments JSF and you should not do in JSF pages.

    Dimitar

  • Fail validation in a table with the "user-defined Exception.

    Version 4.1.1.00.23

    Hello

    I get the above error on a tabular presentation (generated by the Wizard) when a Validation error is displayed.

    I have found two references to this question without a solution though:

    https://community.Oracle.com/message/10481160#10481160

    and

    https://community.Oracle.com/thread/2370356

    In the first link he refers to a MRU missing on the page. There is a MRU on the page and I deleted the Condition of when you press button-> SAVE no condition.

    The second link refers to a popup LOV KEY I have and it's query in function. There are too many files for a Standard LOV.

    The Validation error is displayed, but the shape of table is not displayed and the error message.

    I have 6 filters on the page and they all LOV Standard default values are defined for each element. This is also confirmed in the window Session.

    This is the screenshot of Validation:

    report_error1.png

    This is the capture of the screen Session window:

    report_error2.png

    If anyone can help with this?

    Can what information I provide?

    Thank you

    Joe

    Hello

    I created an example on apex.oracle.com

    Workspace: joer

    United Nations: dev

    PW: dev

    Request: operating 82118 point Validation error

    BUT there is another problem!  The page does not work!  I get:

    Failed to parse the SQL query:

    ORA-01445: cannot select ROWID, or sample, join without table views preserved key

    The WORK_ITEMS table has a primary key, INSERT trigger for the sequence.

    All database fields are referenced to the table and I use not matter where ROWID.

    Other than the page is defined even in my environment.

    Can what additional information I give?

    Thank you

    Joe

  • Validation of two fields

    Hello.

    I use JDeveloper 11.1.1.7.0

    I have a simple form to create a table with 3 fields: ID, VALUE_1 AND VALUE_2. All fields are mandatory.

    I've included (not programmatically) validations for all areas, with personalized messages, but I need to include a new validation for the last two fields.

    I need to check that VALUE_2 is superior to VALUE_1.

    How can I complete this check?

    Is it possible to do not in one program by the way?

    Any help would be much appreciated.

    Thank you.

    Hello

    I guess you want to put validators at the level of the right business components? If this is the case, you could add a validator to your VALUE_2 with the following expression;

    newValue > VALUE_1

    Concerning

  • Validation failed secret fields

    I have a problem in my application of adf for the change password page and page edition user.

    I have a validator put in place on the second of the two password fields (secret af:inputText = 'true') to make sure that the passwords match. If the validation fails, then the value of the field is replaced by ' * ' in the sense of UIConstants.SECRET_FIELD_DEFAULT_VALUE as defined in the trinidad-impl jar.

    I did so that this problem no longer occurs on any other communication by deleting the values on the presentation, so that all other errors (such as existing username or sufficient permissions) do not cause, but validation occurs before the bid if it does not work with password incompatibility.

    I tried to hide the values of bean to support both in the validator if field values we reach the State of failure, but seems to have absolutely no effect, I guess because it passes the value to validate, and so uses to display anything.

    I need to go through the validator rather that just do not reach the presentation, because we need to highlight the field with the error rather than just giving the General error popup. I tried different ways to try to define the State of the error of the field but nothing showed up without lifting, the exception of validator that then triggers the change in the value to «*»

    Is it possible to erase the value of a field that is currently being validated or to ignore the value of secret field Reset? The documentation says it changes the value on the submission, but since the validator keeps it from getting the listener to the effective presentation, then is there a way to raise awareness that this is not presented yet? Or to force validation to occur without pressing the submit button? I tried to adjust autosubmit = "true", but it does not work unless they navigate away from the field, which they do not if it is the last field of a password change form, so I don't think it's an option.

    We use the ADF 11.1.1, but if there is a solution available in 12.1.2 then I can wait until we are able to ship with that instead.

    Thank you in advance, please let me know if there is anything I missed. (We are not using JDeveloper, just in case anyone wants to know)

    The answer to the failure of validation of downloads makes unmodifiable of Timo Hahn also seems to be applicable to this question.

    In the validator just before launching the ValidationException call resetValue() on the text field component and local value will be reset to empty and is not reset to "*".

  • Validation and mandatory fields

    Hello

    I use Jdev 11.1.1.4.0.

    I have ClientEO which has attributes name, address, city, State and Zip and obligatory. On client.jsff, I have them displayed in a table. This table is editable table where the user can add new customer or modify existing customer information. My problem is with validation happening in the middle of entering the information.

    I click on the 'New' button which performs the operation of "CreateInsert". This creates a low vacuum in the table with the fields of text for all, LOV select only one option for the status field. The thing is, if I click on the State list, I get a validation error popup saying all fields are required. I KNOW, but I did not even have the chance to enter them again!.

    If I want the field validation required to treat only the submit, what should I do? I've tried to set skipValidation to true on pagedef, but did not work.

    Any suggestions will be greatly appreciated!

    Thank you

    Bones Jones

    See if this helps:
    http://andrejusb.blogspot.com/2012/09/what-to-do-when-ADF-editable-table.html

  • When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

    whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

    Hello

    Thanks for posting your question in the Microsoft community forum!

    I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

    (1) is the issue limited to only Corel Draw?

    I suggest you to restore the default values by pressing the F8 key while the program starts.

    Reference: File not found valid environment...

    http://CorelDRAW.com/forums/t/4156.aspx

    If the problem persists, I suggest you contact the link mentioned below for the best support.

    http://CorelDRAW.com/forums/

    Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • When itunes download get the error, does not have a valid digital signature that verifies the publication server

    I can not download itunes. I have windows vista.  I get the error message: does not have a valid digital signature that verifies the publication server

    Hi klofcc,

    1. are you able to download and install other applications without any problem?

    2. What is the full error message?

    I suggest that you try the steps from the following links to the article and check if it helps:

    Problem installing iTunes or QuickTime for Windows

    I hope this helps.

  • Select the options for ALL but some in OBIEE prompt with a single click

    Hello guys,.

    I have the below requirement

    I have a prompt that displays the payment terms.

    On the result - 3 payment terms are the terms of payment we and the rest are Global.

    A user will select these 3 conditions of payment of the United States or the reset of the (Global) payment terms, but not all.

    Y at - it somehow I can create an option that selects all terms of payment with one click (as the option all columns)

    also, I'm trying to use all of the columns, which is to select all the columns including US and global, but once the user selects all the column option - the user is not able to selectively disable certain values.

    Is there a work around for this?

    Please let me know because this would be a great help for me.

    Thank you

    Why don't make you a second guest of the column where you add the CASE WHEN to produce the 2 types of terms (US & Global)?

    Then using the "limited by" you auto-filtre the actual list of terms of payment based on the first selection and is to meet your requirement to select all of the USA or Global all with just 1 click.

    The user you want to select just 1 term given? Just ignore the first field of the prompt with the groups and directly select the one required in the second field.

  • JSR-303 Bean Validation use in applications of the ADF?

    I need some opinions on usage of the JSR-303 Bean Validation in the ADF applications? I know it s posible, but it s a good practice? ......

    User, tell us your version of jdev, please!

    The answer depends. If you use the stack complete adf, there is no advantage in using the JSR 303 validation. In this case, the validation logic is read from business objects and transmitted via the link of the user interface layer. In this way the validation is concentrated in the business object.

    If you do not use adfbc, for example you are using jpa/ejb as the business layer, JSR 303 helps.

    Timo

  • I have Acrobat professional 9. I moved it to my new computer Windows 10. Whenever I have printed on a home printer it ask again me if I want to improve and I only have 12 days to do it. How can I get rid of him. I have a valid license. What is the cost an

    I have Acrobat professional 9. I moved it to my new computer Windows 10. Whenever I have printed on a home printer it ask again me if I want to improve and I only have 12 days to do it. How can I get rid of him. I have a valid license. What is the cost and benefits, the upgrade to Acrobat 9 professional to the latest version (I think it's X)

    No, X is not the last. In fact, X, as 9 is now unsupported. After X XI, after that XI was DC. DC is the current version. No upgrade price from 9 more, unfortunately. You can subscribe to DC, and this is recommended because it gets new features faster and includes future updates (probably will be necessary as Microsoft moves to Windows 10 edition when they feel like it, instead of waiting for Windows 11/12 etc..)

  • Is element validation organization mondatory configured in the OM system settings?

    Hello

    Is element validation organization mondatory configured in the OM system settings...? If so, what value does it enter here if point master organizationor operating unit... I tried with the null value in OM system parametrs (body of validation of point) and I couldn't get the item to the customer order-level... When I try to the customer order-level with the value of OM (Organisation of validation of point) system settings, I was able to get the item...

    Is there any option of profile is there for overriede Setup? If so, what is it?

    Please come back to me as soon as possible.

    Kind regards

    Vijay

    We use #1

Maybe you are looking for