Validation of inputText message position

Similar Questions

• "Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll KBDKYR9.dll is not a valid Win32 Application" message at startup.

  Original title: error kbdkyr9.dll

  I get this error code when I start my computer on the desktop a box appears and says

  Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll

  KBDKYR9.dll is not a valid Win32 Application

  Can someone help me with this please?  Also, I tried to download a fix cleaner and it did nothing... I still have it.

  Nicole

  Hi Nicole,.

  1. what changes have been made to your computer before this error message?

  Follow these steps and check if the problem persists.

  Step 1:

  I suggest you put your computer in a clean boot State.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.

   
  Note: Put your computer in normal mode by following step 7 of the hyperlink after you identify the third-party application that caused the problem to occur

  Step 2:

  It can also be caused by a virus, I wish that you run a full scan of the PC using your updated security software or a scanner using the Microsoft Safety Scanner.

• Lotus Smartsuite Millennium Edition is compatible with Windows 7, get "is not a valid win32 application" message

  Is compatiblew Lotus Smartsuite with Word 7

  Get "wordpro is not a valid win32 application" when from word processor & message on time settings change when you open the worksheet, is it because of compatibility issues, or I had somethiung wrong during installation

  I know Smartsuite is old hat but have used it for many years to effect gpood and want to continue if possible

  If not compatible how I can role my new computer restores on Vista please

  YES, IT is At first, that I have failed to install.  When I put the cd in the drive, I would get an error that says "cannot access the registry" or something like that.  I spent hours on the phone with lotus in India and they said they would email me how to solve the problem but have never, even after a few, follow-up phone calls.  Then I found a post in line with a solution and I'm sharing it here.

  I have windows 7 64 bit version and it is now installed and works very well with my client files old husbands and he is so happy.  What you need to do is put the CD in the drive and then go to windows Explorer and click on the D drive (or whatever your external drive) and look at the files that are on the CD.  Find the configuration file and click it.  Simple as Hello - it will install.  He just won "t install when you do it directly from the CD in.

  I hope that others may find this useful.  I'm not a technology person, so I'm glad it was so simple.

• Show a custom before validation on Form Message ~ ~ Custom.pll / Personalization

  Hi all
  
  We have a requirement where we need to display custom before form validation using form customization message is or Custom.pll. I've tried a few things on VALIDATE to the relaxation TIME, is showing the message several times.
  
  Any help will be greatly appreciated.
  
  Thank you
  gt1982
  
  Published by: gt990 on August 2, 2011 10:52

  Personalization you cannot access to the events of validation, then you won't be able to use it for your condition.
  A when-validate-record trigger fires for each new record was changed and so will be shown several times.

  If you are using forms of MFC, you can capture the event VALIDATION POST-FORMS using the HRMS custom.pll.

  Otherwise, it is not possible.

  Hope this helps,
  Sandeep Gandhi

• validation of inputtext

  Hello world
  
  I have a page that contains an af:showDetailItem (tabs), and in some tabs, there is an elements inputText, some of it is required (mandatory) to insert text on the subject. My problem is when I change from one tab to another raise red error message , telling me that you should enter in the required inputText text, I don't want the message when I navigate between the tabs, I want it to appear only when I press the submit button .
  
  Thank you
  Yaser

  Set the immediate attribute for your true tabs

  Published by: M.Jabr on March 19, 2011 01:06

• After validation in taskflow message display.

  Hi all
  I created taskflow as follows.
  
  Action of CreateInsert-> template (page)-> Commit action-> CreateInsert (action)... This will repeat.
  
  The validation works well. I want it is after Commit (action) I want to show popup or a message to the user that the record saved successfully.
  I can add cycle 1 page between Commit (action) and CreateInsert (page), but I want the popup to be published in the same content page... So, how can I do this in taskflow...
  
  
  -Thank you

  Santosh,

  You can write a Java method that creates a new FacesMessage and then add it to the FacesContext (http://download.oracle.com/javaee/5/api/javax/faces/context/FacesContext.html). You could then add that as a method of activity call to your workflow.

  John

• Interactive validation report error messages...

  Hi guys!
  
  I was looking for answer to this question for some time... is it possible to change the interactive report validation error messages?
  
  With respect,
  
  PsmakR

  Hello

  There are validations more than you think. Anthony Rayner has prepared a good summary in a blog post [url http://anthonyrayner.blogspot.com/2010/08/apex-40-enhancements-validating-form.html].
  You see in this post, where and how to disable the validations, but also, that you cannot disable all the. The only way to avoid all postings would be to implement yourself the report completely.
  The good news is, you can replace these messages. The following documentation tells you how to:
  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/global.htm#CHDEDHBJ

  -Udo

• Validation FormCalc error message

  I get a validation error (NumFinalCommit validate error) when I enter a currency value USD $ 10 000.00 or more in the field 'Value of the purchase order' or 'Change total opinion' in the upper right corner of the attached PDF file. The FormCalc works properly, but the error message is annoying for end-users.

  Can anyone offer advice on how to disable the validation error message?

  Hello

  The problem is not having a semicolon at the end of your script to the Calculate event. I changed the form and now the error message is not coming...

  Attached is the updated file the...

  Thank you

  Srini

• If the validation in inputText

  How can I do an 'IF' validation on my inputtext
  where it only allows alphanumeric characters and dash.
  
  Vince

  Vince,

  A solution would be to use one of the [url http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12419/tagdoc/af_validateRegExp.html] these

  You could also do the same type of validation on the model layer.

  John

• Error:-200277 is not a valid combination of the position and the offset in mx data acquisition

  Hello everyone, I use a NI SMU 6361 DAQ in LabView 2013 (32 bit) to acquire samples from six sensors (currently). The signal is a bit noisy, but behave correctly after filter software by averaging, so I dug a little and found the code shown by NOR in this video:

  https://www.YouTube.com/watch?v=fkIYp1mqp_g

  So far, it has worked great, the loop basically takes anything to run and gives me a signal clean and Nice, but when VI starts first of all, I get the error code mentioned in the title, by saying that I am referencing a non-existent sample, since it is before the first (example 0). He has absolutely zero effect in the real VI, since if I hit continue, it works fine, but as it is for end-user oriented, I don't think they like to see a mistake every time you start up then, did somebody encountered this problem? And if so, how do solve you? Any ideas to spend at least the error message? So far I have tried:

  -Insertion of a sample of reading the real while loop, no luck

  -Insert a wait for completed task, gives me a timeout error

  -Which in fact a little wait to not round, no chance

  EDIT: Please ignore the loop for now, it has been used just to show if the data has been formatted correctly and will be used for filtering software, but has no effect on the error.

  

  I'll take a shot at your comments:

  -When I run with a simple/general error handler outside the while loop, it reports no errors

  -When the error handler is inside the loop (after the reading) it sends the error message, but doesn't give the option to continue

  -When I run all at once, with a real constant for the stop condition, it reports the error of loop

  -When I run on the execution of highlight mode, it does not report the error once again

  All relate to the thrust of the error that you can not collect samples which are periods of sampling of 2000 in the past until the task is run at least 2000 sampling periods to capture.

  1. the error in the loop tunnel is only retains the last value of the error.  Probably, the loop runs several times where the error is generated, but never seen.  Once spent enough time to get samples of 2000 in the buffer of data acq, subsequent executions no longer produce an error.  If you stop the loop after this date, the most recent error value is indeed "no error".

  2. Yes, you see the error that happened on the iteration 1.  The time required to respond to the dialog box is quite probably a long time you * only * see the error on the iteration 1.

  3 Yes, as described above.

  4. the code runs pretty slowly for the start time of the task until you come finally to the first Read DAQmx is longer than the 2000 sampling periods.  Once again, Yes.

  Couple of several things:

  -Bob comments are super useful and important to keep.  Auto error handling behavior are a real subtlety in LabVIEW, not at all intuitively obvious because almost any other terminal output can remain unwired without consequence.

  -J' threw together a quick example, mess of my notice to loop before calling with offset = 0.  The following works fine without error on my end, using a desktop computer X - card in the series similar to yours.  I ran 4 channels at 100 kHz, and then again at 1 kHz without error.  The case of 1 kHz took the second planned couple to run to completion and the first Offset = 0 reading has done its job.  You can save the pic (save in png format) and then drag the file on an empty LabVIEW diagram to get the instant code.  Adjust the device, channels, sampling according to your needs and tell me what you get.

  -Be sure wiring in the 'NB of samples' entry on the call of DAQmx Read!  When I removed this thread in the example below, I saw your error also.  You must connect this number of 2000.

  -Kevin P

  

• HP Pavilion g7-1075dx: Admin word password not valid disabled System Message: 58236228

  I've forgotten the administrative password and I try to do a system restore. The discs were too scratched to complete the recovery and the computer won't let me boot to recovery without administrative password disks. I can't every time, I get this message: "Invalid Password 58236228."

  How can I get my computer back to functional?

  At the password prompt, try 47194808

• Validation in ADF messages

  Hi all
  
  I use ADF BC, JDev11g. I use 2-3 entity objects. I need to replace the default ADF Messages and define new messages. Error, message, I defined should appear. Any aid granted to achieve this would be very useful.
  
  Thanks and greetings
  Jyothi

  Check out these 2 links of the Guide to 11g of Fusion:

  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/b31974/bcadvgen.htm#sthref1950

  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/b31974/web_adv.htm#CIHHBEEJ

  -What are you trying to achieve?

  CM.

• How to change the error icon in the validation error message in inputText

  Hello

  I want to change the error icon in the error message when a validation Rodez inputText.

  I know we need a new skin. Should what changes I make?

  inside in your skin such as changing file

  af|message::error-icon{ 

     content:url(/adf/images/abc.png); 

  }

• AF:inputtext change the color of the text on pressure from button and the position of the caret

  Hi all

  Very green, when it comes to ADF so I hope to give you enough information to get assistance.

  I found a 2008 document that created Frank Nimphius that shows how the JavaScript in the ADF and the manipulation of the inline style property.

  It is titled "ADF Code corner 010. How to create a character counter of entry for text fields.

  While my use case is not the same I feel that I could use for my use case logic.

  My use case is that the user wants a text field to replace the blue color when being typed in so that they know what they changed.

  I'm jusing JDeveloper 12.1.2

  That's what I have my input text looks like:

  <af:column sortProperty="#{bindings.ChiefScaleOrderVO.hints.OrderNo.name}" filterable="true"
                                 sortable="true" headerText="#{bindings.ChiefScaleOrderVO.hints.OrderNo.label}" id="c1"
                                 width="11%" inlineStyle="#{recordManager.columnStyle}">
                        <af:inputText value="#{row.bindings.OrderNo.inputValue}"
                                      label="#{bindings.ChiefScaleOrderVO.hints.OrderNo.label}"
                                      columns="#{bindings.ChiefScaleOrderVO.hints.OrderNo.displayWidth}"
                                      maximumLength="#{bindings.ChiefScaleOrderVO.hints.OrderNo.precision}"
                                      shortDesc="#{bindings.ChiefScaleOrderVO.hints.OrderNo.tooltip}" id="it1"
                                      autoSubmit="true" valueChangeListener="#{recordManager.columnTextModified}"
                                      clientComponent="true">
                          <af:clientListener method="keyInput" type="keyPress"/>
                          <f:validator binding="#{row.bindings.OrderNo.validator}"/>
                        </af:inputText>
                      </af:column>
  

  This is what looks like my javascript:

  <af:resource type="javascript">
         function keyInput(evt){
            //document.getElementById(evt.getSource().getClientId() + '::content').style.color = 'blue';
            textfield = evt.getCurrentTarget();
            textfield.setInlineStyleProperty("color","blue");
         }
  </af:resource>
  
  

  If I do an alert (textfield.getInlineStyleProperty("color")); before and after the the setInlineStyleProperty it does not say it gets the value at the blue, but my text color never changes.

  If I do the document.getElementById (evt.getSource () .getClientId () + ': content ""). style.color = "blue"; It works, but I'm doing things the "right way".

  So is there another way to do this now in 12 JDeveloper?

  Also is there anyway to when you click inside an af:inputText that he will not select all of the text and just position the cursor at the end?

  Thank you

  Derek Hansen

  Well, you try to set the wrong property.

  According to your example of "pure" javascript, you must set contentStyle and not inlineStyle.

  Then try something like: textfield.setContentStyle ("color: Blue");

  Dario

• Validation error message appears several times in popup

  Hello
  I use Jdeveloper Studio Edition Version 11.1.2.3.0
  
  So basically, I have a validation method on an entity (shifted to the level of the transaction) that runs whenever change 1 of the 4 attributes in the table.
  The table is based on the original Version of course and has clickToEdit in edit mode.
  Validation works fine and survey the message correctly, however, every time you try to navigate away from the record, while it is not valid, the error message is added to the list of error messages in the pop-up window.
  Is there a way to show the error only once? even if the user tries to navigate several times outside the line?
  
  Try to search on the net for some answers, but nothing helped, everything points to a bug, but I wonder if there is a solution.
  
  Thank you!
  MB

  Thanks to our team leader, this has been solved very simply.

  First a javascript method was created in the page using af: resource:

  function clearErrorMessages(event) { AdfPage.PAGE.clearAllMessages(); event.cancel(); }
  

  Then a client listener has been added to the table in question, that connects to this function

  That simple :)

  Best regards.
  MB