Value added package and touchpad driver for Linux

I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux.

Where can I find it?

Hello!

I put t know what phone you have but the Toshiba value added package is available for Windows. I checked the Web from Toshiba site but for Linux I can t find it.

The driver for the touchpad, normally you can also find on the Toshiba site but it s is only available for Windows. Maybe you can find a driver on the site of the factory, for example, Synaptic.

Good bye

Tags: Toshiba

Similar Questions

  • Toshiba value added package and Qosmio F45

    Hello

    After reading [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=103556] that there is a problem with the keyboard shortcuts no longer work after the upgrade to the 'Toshiba value added package' in * Qosmio F45 * models, let me ask you if someone have correctly installed the latest version of the software (1.1.7) and have no problem with the keys.

    I just installed SP1 on my system Vista Premius. Should I wait for problems with PPV?

    I'd appreciate your help.

    Alfredo

    Just a short comment: version 1.1.7 is designed and tested with Vista without SP1. If you use it with SP1, you may have some problems. To avoid this Toshiba has to offer the new version. This new version will run in the new images of recovery (Vista SP1). After that it will be offered on the Toshiba support page.

    Qosmio F45 is probably US laptop model and for all information visit Toshiba US page http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

    By the way: check out this interesting article on restrictions with Vista SP1
    http://APS2.toshiba-tro.de/KB0/TSB84026M0000R01.htm

    Bye and good luck!

  • The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

    I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

    Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

    However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

  • Re: Value added Package should I install for Satellite X 200

    Hello. I got a tempo notice that a new update was available.
    When I downloaded the file, vap - 20080109135106.zip of
    [] http://nordic.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=60820&OSID=26&drive = 42 rLanguage & SOURCE = TEMPO & LNG = 18] and extract, 3 install different files in there.
    It is one of 0, 2 and 6 models of button?

    What one do need me?

    Thank you.
    Chris

    It seems that this added value package is good for your laptop, because I can see the description that the X 200 Satellite is one of the series of supported!

    Please also check this doc from Toshiba:
    http://support.toshiba-tro.de/KB0/TSB7801XK0005R01.htm

    and maybe this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=102653𙃽

    Good bye

  • Toshiba value added logical and device for general use - what is it?

    Hello

    I completely put in place a new system on the Tecra S2, Win XP and everything. All the drivers from the site Web of Toshiba helped but now only a single 'questionmark' remains in the hardware Manager:

    Toshiba added value to general use and logical device

    I cannot find a driver anywhere or so for that. What is it indeed?
    The laptop works fine, no problem.

    Greetings,
    Ben

    I think it is (among other things) an ACPI driver...
    and you can download it-I remember...
    don't forget the 'value added package' and 'common modules' to install

  • Satellite P870 - Toshiba value added package cannot be shown in my language

    Hello, everyone.

    I have problem a Toshiba value added package.

    I bought a Satellite P870.
    When I use WIN7 by Toshiba NB recovery system, the display language after pressing the Fn key is correct (Chinese).

    But I want to reinstall Win7 clean by myself, so I copy the drivers and utilities all my USB storage and install Win7 clean.
    After I installed Win7 (Chinese), I installed all the drivers and utilities.
    After installation, value added package and restarting, the main Fn works normally.
    But the language of the display key Fn is English, it is not Chinese.
    I reinstall value-added package severial times, but it also to display the text in English.
    How can I change the language of the package adding value?

    Thank you very much!!!

    Stand by.
    Where have you bought your laptop (COUNTRY)?

    AFAIK, you must use the drivers offered on the Toshiba support page offered to the country of purchase. On this page, you should be able to get the version on some languages.

  • Toshiba value added Package for Windows Vista Version 1.1.3 on Qosmio F45

    I installed the new * Toshiba value added Package for Windows Vista Version 1.1.3 * for my Qosmio F45-AV413 and function keys was arrested for work.

    If I don't go back to the previous system, there is no action that I can do to make the works of buttons again.

    I tested with Vista Home Premium which is installed with the product, tested with Vista Business from scratch, and none of them work as expected.

    Well, if someone could help me with this question I really thank you,

    Marcelo.

    Have you already tried to install an earlier version of the software function button on your system? I think the new version is buggy and if not already a newer version is released, you should have the old version until a new one comes out.

    Please check if the old version works, it shouldn´t be a big problem for the single download from the Toshiba driver download site.

    See you soon

  • Qosmio G30 HD-DVD (PQ31): updated Value Added Package

    I wonder if anyone has noticed this. They offer a value-added package update dated 08/01/2008 my Qosmio G30 HD - DVD (PQ31). The file reference is vap - 20080108132320.zip. I downloaded and installed the utilities contained in the compressed file, but now when I boot my laptop with Vista Ultimate, what follows are reported as incompatible with my version of the system: Toshiba Power Saver, Toshiba zooming Utility, Toshiba Wireless Hotkeys utility, Toshiba Raid Utility, controls of Toshiba, Toshiba Touchpad, utility, utilities Toshiba & finally Intel ProSet Wireless Driver.

    After checking the zipped file, I noticed that the installation files are named for the PQ-32 my PQ-31!

    Could this be the problem or Toshiba is not compatible Vista Ultimate? Your comments would be greatly appreciated

    PS I assume that this question should be addressed to Toshiba direct, but strangely, they fail to give an address for your comments.

    Zaki

    Hello Zaki

    Please don't be crazy about me, but what you wrote is noting but totally absurd. There is no difference between the versions of Vista and all Toshiba designed tools, utilities, or packages are universal and can be installed on every version of Vista.

    Qosmio G30 is quite long on the market and you are the first person who says something like that. I really wonder why?

    VAP is identical for both Qosmio models and there is no difference. PAxxx number is different but the platform is the same and there is no reason to make two different veterinary antimicrobial products.

    To be honest, one thing is interesting to me: How do you get the following are reported as incompatible with the version of my system?

    Before you try to install already preinstalled VAP should be removed first. If you do a clean install of Vista Ultimate there should not be any problems at all, just follow the order of the facilities.

  • Portege R830 - Win 8.1 Value Added Package (Flash cards)

    Hello.

    First of all I would like to say that I used my Toshiba Portege R830 with all the operating systems since Windows 7 and I have never installed fresh OS.
    That said, I could not use Intel WiDi on Win10 and had to return to Win8 (DVD which I happily bought as well as the upgrade).

    I installed all the software Toshiba using Upgrade Wizard and for the first time since the 2011', there was no Flash cards available (drop-down menu shown with use of the Fn keys). I used to like 2.5 years on Win 8/8.1 and now his party and is not available to the installation...

    WTF? After a week, I discovered that cards Flash is not present in VAP 1.6 (only in 1.5.X.X or earlier).
    Unfortunately I can't install only stand-alone Flash cards (or can I?).

    And here my question: if I install VAP 1.5 (with Flash cards), can I (ANYHOW) strengthen certain elements (such as system driver) without uninstalling the previous version of VAP?

    From my experience when I run VAP 1.6 installer first thing it does is an uninstall complete previous versions.

    Please help me! I can't imagine who thought that removing the 1.6 flash cards would be a good idea...

    Driver Toshiba UE page provides the Key Utility for Windows 8 Upgrade feature Toshiba v1.00.6626.03.

    So, if you have installed Value Added Package 1.6.0130. You must also install the key function Toshiba utility

  • Satellite L40 - error message during the installation of value-added package

    Hello

    yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

    I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
    I ran as administrator and also tried compatibility mode.

    Help please, thx!
    Constantin

    Hello

    Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
    My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

  • Cannot find v1.2.25 value added Package Windows 7 x 32 RUS

    Where can I find drivers for Windows7 x 32?
    Why should I spend two hours on the internet to find the 'value added Package v1.2.25 Windows 7 x 32 RUS?

    + The message was edited: assignment has been translated.

    I don't understand where is the problem.
    If you visit support Russia Russian page on http://www.toshiba.ru/innovation/download_drivers_bios.jsp?service=RU and I hope that you will find all the drivers for your machine here.

  • Satellite A200-1N8: value added package does not

    Hello

    I have Toshiba A200 1N8 and which tent to install value added package to my computer laptop everything seems ok, but nothing chnaged in the configuartion of windows, the keyboard shortcut and function keys do not work.
    I think that changes have not taken effect.
    I tried uninstalling and reinstalling, safe mode... nothing has worked

    How can I solve this problem?
    My laptop is a model 6 buttons

    You must first remove the old version of VAP.
    Then you must download the new VAP for the A200 series right.
    As you know different A200 series exists and you must choose one that fits.

    In addition, you can choose the version of Toshiba controls for 6 control button.

    Best regards

  • Value added package install failed...

    Hi, I had a little problem.

    I've got GamerEdition of Vista 64 - bit OS. And a Toshiba - Satellite Pro U400 - 13G system specifications:

    Core 2 duo P8400 2.26 ghz processor
    4 GB OF RAM
    Intel HD 4500 graphics card
    Conexant HD Audio

    Now, when I try install Toshiba Value Package added, I get this error at the end of the installation:

    ID_ERR_NOTINSTALLTVALZ_MESSAGE

    ... and Setup fails.

    But the Setup has copied the files on my "C:\Program Files (x 86) \TOSHIBA" folder, IV ' e got:

    Bluetooth monitor
    FlashCards
    PCDiag
    Energy-saving
    SMARTLogService
    SmoothView
    TBS
    TOSHIBAValueAddedPackage
    TVALZ
    Utilities

    ... in my Toshiba folder, containing a total of 52, 4 MB. In the utility folder, I try to run "TACSPROP.exe" and says that "the registry is missing or may be broken.

    now... I know this problem most likely because I have a modded Vista version, but does anyone have an idea how I can do value-added package running on my system?

    I agree with you. You have changed the version of Vista. I imagine that this Department of software Toshiba create each tool and utility for Vista and of course to test it properly.
    No free version is not designed to work with the version you are using.

    VAP is not editable by anyone and there is nothing you can do. If you use an exotic OS version either it works or not. Sorry but there is nothing you can do with VAP.

  • Re: Qosmio F50 - 12J - FN key doesn't work only with new value-added package

    Hello
    I have Toshiba Qosmio F50 - 12J and have problems with value-added Package v 1.2.28.

    I can't get flash cards to work. When I press FN key on nothing happens. BTW, I installed VAP on freshly installed Windows 7 64-bit. With the VAP previuos version that I tried on Windows 7, KeNotify.exe broke. Now there is no apparent crash, but nothing happens.

    Also, is there a problem with the utility of the Support Button (which touch). Whenever I reboot my system, all the white light LED on my laptop turned on even though I have them turned off.

    So, could someone confirm that they have a work of value added Package v 1.2.28 on Windows 7 64 bit?

    Hello

    I had the same problem on my Qosmio F50. The solution is just to install Flash Cards Support utility. This tool is designed for Vista, but I noticed that it also works on Windows 7. Just check the Toshiba page where you can download:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    In addition the lighting buttons work correctly on my F50. You can use them properly, or what happens exactly, if you press one of them?

    By the way: there are two different versions of BIOS on the Toshiba site. You use the BIOS for Windows 64-bit? Check this box!

  • Qosmio F60 - 11H - DVB - T tuner YUAN STK7700D driver for Linux OS

    Hello.

    I have a Toshiba Qosmio F60 - 11: when I installed in triple-boot Windows 7, Debian and OpenSuse. I have trouble using the Yuan STK7700D integrated dvb - t tuner, because I was unable to find the suitable driver for Linux.

    You know how I can fix this problem?

    Thank you.

    Linux is not supported by Toshiba, so you're on your own. You can check is supported by the manufacturer directly and see if they offer a Linux support.

    By the way: If you have Win7 you can watch TV on Win7.

Maybe you are looking for

  • How to recover photos in iPhoto sierra

    I just upgraded to sierra and all my photos in iPhoto are gone! I didn't return, I know, but it needs to be recovered somehow! can you help me please?

  • Suggestions for 23gig film project of remote transfer?

    Hi all - spent some time seeking the best solution (desktop folder / public remote etc.) but still uncertain about sharing.   I need d.load/share my mac mini 23gigs comrades through the web, but as he slow (2.5 mg) - upload ftp even will still need t

  • F55 will never make more than 60 fps in 4 k?

    It's the only thing that put me off buying a F55 at the moment - I join pre registration but can see it coming before too long. 120 frames per second at 4 k seems unlikely - does anyone know different? Unless he'll do it 120fps I would go for an epic

  • MFP HP LaserJet Pro M127fn: HP LaserJet MFP beep M127fn Pro

    Hello. I had this printer, but I had a problem. When I sent any job to the printer it is still a "beep". I have already disabled the alerts in the configuration of the printer, but the sound continues. Is it possible to turn off that noise?, it is ve

  • instructions for the elimination of the sound Module of Activation dialog box

    Whenever I start up my cpu a dialogue box titled: Module of sound Activation. The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Please insert the disk and press OK. I have no idea why the box appeared a