Value change event

Hello

As you can see the attachment, I have a 'CNC' (X) and a 'digital indicator' (Z) whose value is changing by a "numerical control" (Y).

When I run the code, and change 'X' event produced a notification but when I change the value of the indicator 'Z', using the 'Y', the Structure of the event produced no notification.

Why is this and how should I be notified when the value of 'Z' has changed?

Best regards

VALENTINE'S DAY

Hello V.,

attached to something that would work.

Depending on the nature of your request, there must be a better way to do what you need.

Normally when I tend to use this property node I start questioning my design.

Tags: NI Software

Similar Questions

  • "Error Out.status": Value change event.

    I get no event that fires when the error on the 'status' change?

    Change event simply write data to a terminal indicator do not have a value.

    The only things that cause a value change event are the user interaction with a control, or by writing to the (signalling) Value property of a control or the indicator.

  • How to reset a while loop based on a value change event?

    Hi all

    I work in a labview program that sends voltage to a laptop via USB 6008, tension is amplified by an op-amp, and then he comes back in the laptop. I created a program and a working circuit, but my current challenge is how to reset the average of the values of voltage coming into the laptop, after that the user changes the digital control (which controls the output voltage). In other words, I need to be able to reset the number of iteration and the sum to 0 each time this happens.

    I looked upward to reset the counters of iteration through shift registers, but I'm not sure it will work in this case, but I'm also not sure how to reset the sum of an array (if possible). I have spent a lot of time to read these forums and tutorials from various sites, so I think it can be done with the correct nesting of the case structures, structures of the event and while loops, but I don't know how. I am new to LV, just started to learn in mid-January, so any help is appreciated.

    Thanks in advance,

    Graeme

    You just need the structure of single event with the bargains.  Use the case of timeout to get your new values and find the average (100ms timeout value and get rid of the wait function (ms)).  Keep the amount and the number of items in the shift registers.  Wire these values through each case of the event.  In the event of changing the value: control, just set the values to 0.  Then add a Stop button value change event to stop your program.

  • How to get the ActiveX component value change event?

    Hi all

    LV 8.6.1

    I try to get the ActiveX component value change event. I covered forum and through examples, but I can't get an idea of how "Recalling vi. For example, in the example 'ActiveX event Callback for IE.vi' it is used "recall vi". I've added an example where the change event of value with the mouse to the bottom of the event are scheduled to the structure of the event. Mouse down event OK work but change the value no. Can anyone describe what I need to add to my example vi who value the change event works fine?

    BR, Jim

    Here is the solution! "Value changed event" is not performed in the structure of the event, but in "Reminder VI".

  • Value change event, be it be programmed to trigger only when the USER changes the value?

    The structure I set up is the following, I have a control in which the user chooses a value when they choose this value, the value change event takes place setting in the device. Then I am bed in unit values and display them in this control via a property node.

    My problem is that whenever I read back a new value in the control, he takes this as a value change event and resets the value within the system, is it possible to make this event don't move when the user changes the value?

    Yes!

    My thoughts are that you use a Value property (signalling) node to display for the control. That will trigger another call to event.

    Use the NO signs of property value node or a local variable.

    Your postal code, if this isn't the case, then we can help you understand what is happening.

  • reference, triggering case value change event

    Hello

    I have 2 VI, it has a switch on it and one for the event that watches for a change in value on the toggle switch and if it detects one it turns on a light.

    The second VI reference the first VI and reference of the toggle switch.  This second VI I wish I could switch on or off and have the case of the event in the other VI do its thing.

    This is not the case.  The same case is not catching the failover when I do for one another VI referencing the switch

    is there a workaround to do, a way to make the case event notice that the reference value changes without having to not to use the case of the event?

    Thank you very much!

    You use the Value property (Signaling) to trigger an event of value has changed.

    Lynn

  • How to disable the page for a value change event processing

    I am trying to find a solution to a requirement and is currently working on use cases using the HR schema.

    I have a text entry box in the page that accepts a new Department name.

    The value change listener method on it called a bean of support to verify the uniqueness of the name of the Department. (I'm an iteration through the lines of the Departments table to check if the value is unique)

    Now, I need to disable the page and display an hourglass, so what this control and display a message at the end of the treatment.

    I have this job except that I don't know how I can disable the entire page and see an hourglass.

    I have to use Javascript for this?

    Hello

    I've had this work now after the use of clientListener as below.

    Binding = "#{backingBeanScope.backingBean.IT1} '"

    ID = "it1.

    valueChangeListener = "#{backingBeanScope.backingBean.checkUnique} '"

    autoSubmit = 'true '.

    Validator = "#{backingBeanScope.backingBean.validateDeptName}" > "

    Type = "valueChange" / >

    Thanks for your help.

    References: http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf

  • value change event not called on the evolution of the value falling down


    Hello

    I have a drop down with values such as... 1-25, 26-50 and so on.

    I need to see the 1-25 as pre-selected when the page is loaded. and when we change the value in the drop down a listner valuechange is called and will service call.

    But when I again selects the default 1-25, at the time where only the value changes listner is not called.

    To show the value that pre-selected I put:-noOfRecSOC.setValue(1);

    noOfRecSOC is the drop down on the screen.

    You must not directly set the value in the UI component. Use the property value drop-down list together for years by default here. Otherwise the value change listener do not notice the change to the original value (as it is never changed).

    You can use a variable temporary pagedef for the value. check out my blog Creating Variables and attribute Bindings to Store values temporarily in the PageDef | JDev & amp; ADF Goodies to find out how to do this.

    Timo

  • Generation of a value change event internally by the application.

    Hello

    How to generate events programmaticaly change value by using the value property of the signal. I find the solutions on the forum who have the solution but the problem on these solution is this property node are within a while loop, so even if the value does not change an event is triggered that is not desired in my application. Can someone give a solution for this.

    Thank you

    Use a feedback node, and a box Structure so that you only write the property node when the value actually changes.

  • [GUI] Cannot filter value change events

    Hello

    In my front panel, there are some controls as in the following image:

    I'm not able to do the following:

    when I change the 'value' by arrows button (or by the arrows), I want to change its property "increment" according to the "multiplier value".

    If (multiplier == 1.0)

    value. Increment = 1;

    else value.increment = 0.1

    If I use the "change value" event on the button value, I miss the first update, because the event is processed AFTER the rendering of the GUI of the button. I tried different events, mouse enter and mouse down? but without success.

    All suggest?

    Thank you

    Hi Pierre,.

    See attachment

    I hope that your first time, click on the arrow is now resolved?

  • How can I determine who controls a cluster fired < all > value change event?

    Hi all

    I have a cluster (control) that looks like this:

    It is a single channel of data, consisting of a gauge with two needles (set point and actual), a separate digital control related to the gauge (fixed point data type), three combo boxes and a button. When the user interacts with one of these items, I generate a Modbus packet to retrieve / set the data. My current implementation uses events, one for each single command in the channel - and I have 5 channels. Is it possible to use the parameter in the event handler, and then using the source node (or similar) to determine the control that has been actually clicked? Then, I might be able to use an array of clusters for further simplification. I'm fighting to understand the source node.

    Thanks for any help

    Ray

  • leads the value change in the structure of the event

    Hello

    Please the the VI attached.

    I would like to know what event triggers when the value true or false of the changes led?

    In the case of structure above the structure of the event, the values of true or false of the led are changed.

    From the change, the analog output for Acquisition Card changes. However, the change event of the value in the structure of the event never fires, I know that I run the Vi with the selected highlight enforcement tool.

    Thank you

    Venkat Rao

    Changing the value in an event structure occurs only if one of the two following situations occurs.

    1. the user who modifies the control on front panel.  That may not happen since these LEDs are indicators and does not control.

    2. the program writes a value of property of the Value indicator/control (signalling) node.  Writing to the terminal of the indicator, or the local control variable / indicator not fire the event.  Given that you do not use value property (signalling) nodes in your program from this moment, won't happen either.

    Note that the value change event is a bit misnamed.  The change event is triggered, even if you do not actually change the data.  So if your LED is currently worth, and you write a True Boolean value for the Value property node (signalling), the event always fires even if you're not technically change the data.

  • events triggering not on value change

    Is there a problem to have several event facilities in a VI that handle the same event? Specifically, I have a stacked sequence where in an image, there is an event loop (structure of the event in awhile put in loop) which manages the user interface buttons and closes the loop when met the correct conditions and then moves in another frame with another loop of events that handles the key events even in a manner slightly different and also some data acquisition view and generate files.

    I have attached a simplified version of VI that illustrates the problem. If the second event (in box 3) loop is activated, the RUN button are not managed in the first loop of the event. If the second loop of the event is disabled the button RUN are managed in the first loop of the event.

    This is something that can not simply to be chart labview? I'm more used to do this kind of programming in C or VB where the handler determines its behavior based on some global state variables and maybe I don't see how to achieve this easily in labview.

    I wouldn't the things sentence too strongly, as Dennis has, his points have merit.

    Your problem is with a parameter set to the value change event in the second structure (a checkbox in the dialog box), which tells the LV to lock the front until the end of the case of the event. Given that the occurrence is not complete (it doesn't even start), the FP remains locked and you can't do anything. The key here is understanding that registration for the event occurs as soon as the structure of the event between the VI is execution mode (simplification, here we just say the VI began to run) and from that point on the recorded events are queued, but you let run never really the structure of the event.

    The band-aid patch might be to uncheck the box for this option, but this isn't a good solution. A better solution would be to review your code in such a way that you don't have the event structures in order. There are many options for how you can do it. Here is one that is quite detailed - http://www.notatamelion.com/2015/02/23/building-a-proper-labview-state-machine-design-pattern-pt-1/

    In this one, you basically have a structure of the unique event and you react to events according to the State of the system.

  • How to trigger the value change in the structure of the event

    HII everyone, like the title, how should I trigger the value change event to display a message... Here is my connection... I want to trigger structure of the event to bring up the subvi, when the flame and the led are TRUE State... I have using the node property, but still not able to run event structure... How should I connect? Thank you very much...

    There are several ways you can do. First of all, you need to configure your sub - vi while he does everything you want when you run (in the properties of vi, top most window for example) and to make sure that it closes completely when you're done (when you click on the 'OK' button, for example).

    Spend you need an asynchronous call to the subvi. There are several ways to do so. My favorite one below. You go in the palette under 'Application control' and select a static reference VI. I like this approach because it keeps track of the way subvi for you, as long as the subvi is in the same project. Then, drag the sub - vi on the empty square which will be changes to your sub - vi icon. Then, you connect to an invoke node in the same palette under and select run VI. "Wait, that 's" set to false and the main VI will continue to function after the start of the vi of Sub. Together "Auto Ref" is the best way to go. Otherwise, you will need to follow the sub - vi reference and shut up yourself when you are finished.

  • passing value change of timeout

    Hello

    need help...

    I have a button wic radio replace the text arrouding in the time-out period.

    If the text is 0 = the radio button value will be b = 1

    If the text is 5 = the radio button value will be b = 2

    and so on...

    in this State... say to my whenever I need to check the text, and if the value is 0/5

    I need to call the "" option button: change the value "event..."

    How it is pls help. THK u

    Hi Vsh,

    Thanks for the help, it works.

    but can not understand it's part...

    "It is recommended to have a change event for your controls to the string value, (do not timeout) call the part of the code (from the radio button value change event) in the case of event of value chain." This will isolate you design conflicts. »

    can u explain more... Please... I as eager to know that with a time-out... for most it cause so much conflict...

Maybe you are looking for