Variables of passage of the Agent to the analysis

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• Mac Pro is not displayed after the passage of the screens

  OK, so this is a strange problem but it's very annoying (at least for me). I just bought a LG Ultrawide 29 "display and connected via a HDMI cable to my Mac Pro (Home machine) and a second HDMI cable to my Macbook Pro (desktop computer). The Mac pro / Macbook pro good work with the big screen, HOWEVER, when I use my Mac pro and select the tilt of the screen to switch to the HDMI 2 connection, it works and rocking on my Macbook pro. But when I try to switch it back to HDMI 1 (Mac Pro), it comes back with a black screen and says no signal. Even if I plug the HDMI cable it does not work. I set the timer to 3 hours sleep, doesn't always help. I know he's not missing sleep because itunes can be played when I spend and still playing music throughout and continued when I try to switch back. The only way I could get is long, press the button on my Mac Pro and restart.

  The only reasonable difference that I know is that the Macbook pro is running Yosemites, while my Mac Pro running Beta El Capitan. I have a feeling, this is probably the cause, but I just wanted to know if someone has solved this problem somehow.

  Thank you

  Hello Hemlock70,

  Thank you for using communities of Apple Support.

  I understand that your external screen remains completely black, with a message no signal, during the passage of the views.  For assistance with this problem, please go through the steps in the link provided below.

  Get help with graphical problems on external displays connected to your Mac.

  Take care.

• Create variable FileGlobals without deleting the existing, using the API of TestStand, LabVIEW

  Dear community OR,.

  I create the FileGlobals Variables as described in the attachments. Variables are created, but at the same time, all the existing ones if the FileGlobals file is deleted. Could someone help, please, how can I insert variables, no effect on already existing ones?

  Thank you very much in advance!

  I struggled with this problem all morning, and... I realized that this code does not remove the FileGlobals variables. Code to create the fact, that runs before this code... So I corrected the code - it works now!

  Thanks for all the help, I found interesting things of couple - I did not know this increment of the changes made to the file.

• How to get the value of the global variable to test in the user interface of labview?

  Hello.

  Can someone please share examples and tell me how access the global variable to test using the interface labview user.

  I found some references and obtained from the method.

  I sent the link below

  https://decibel.NI.com/content/docs/doc-5501

• variable sharing, missing data, the timestamp even for two consecutively given

  Hello

  I have a problem with missing data when I read a published network shared variable.

  Host VI:

  In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)

  VI target:

  the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.

  Problem:

  rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.

  To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.

  Note:

  The shared Variable is hosted on the laptop and configured using buffering.

  The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.

  Simplified example:

  

  

  Question:

  Anyone has an idea why two consecutively data can have the same timestamp?

  Where timestamping (evil) Finally comes (System?)?

  What would be a possible solution (for the moment with shared Variables)?

  -> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.

  It would change anything when I animate the shared on the RT System Variable?

  Thanks for your help

  Concerning

  Reto

  

  This problem has been resolved in LabVIEW 2010.  You can see other bugs corrections in theReadme of LabVIEW 2010.

• Shared variable of subjects with the executable in real-time

  We have a PXi target running Labview time real 8.5 and we use a series of shared variables for communication between the target and the client software. The code was developed (and used) in the last 2 years, and presented no problems with the shared variables when they are deployed since the Project Explorer (for the target and the laptop based client software). However, when you try to run an executable version on the system time PXI real target of exactly the same engine code variable shared seems to fail during the initial loading. Since it is an executable, it is difficult to display errors, but it seems that the accident occurred at the beginning of the program when we try to initialize a number of shared variables. Sometimes it loads but probably only 10% of the time. When you plug the tool to debug for code and restarting the executable, runs without any problem. However, once we managed to capture and error (error-1950678982 the shared variable client side read buffer is full).

  I checked a number of messages in the Knowledge Base (e.g. how to deploy Variables of a compiled executable shared network?), but it still has not solved the problem. Thoughts and suggestions?

  Adrian

  I tested it for a few hours now and I can't make it fail again. The big difference in my implementation was to use your suggestion, and no wire the error cluster through the method since the error it generates caused a number of questions later. So let me summarize the final configuration that seems to work then:

  -during the execution and executable on a target time real 8.5, startup not connected to a client. Library of shared variable hosted on the target and should load by itself.

  -J' added a flat structure sequence on the vi 'main' (top of page vi executable) with a node (as shown above) Invoke method in the first structure with a timer to 10 seconds and the rest of the code in the second part of the structure. The shared variable library has been copied to the target in a data directory and the path provided to the method (the same way as above) and the IP address is that of the target.

  I discovered that it takes about 8-9 seconds for the shared variable engine and library to start (I don't remember is that past exactly that) and it is important to wait this time to initialize shared variables or the behavior is unpredictable. The method always generates the error 1043 (function not supported) but I simply ignore it now, and it seems to work.

  Thanks for your help! I will let you know if there is some instability in the future, but everything looks good from here.

• The analysis of the Variables of e/s channel properties

  I have a situation in which I would like to configure the Daq on a cRIO since an interface of configuration on a Windows host. In particular, I would like to get IO addresses Variable for all analytical engine channels configured on the cRIO. The Setup program runs on the Windows host and impossible to deploy any demon on the RT which could question the material. He needs run as if the cRIO is not present.

  The configuration program is part of the same project as the cRIO, so my thought was to analyse the project to find corresponding topics. Here's a post that does something very similar:

  https://decibel.NI.com/content/docs/doc-16630

  However, this has several problems. This example was written in 2011. I am using 2015. Apparently, the properties have changed since then. Children' find' (it is no longer named "children []") does not give me the chassis on my 9068 reference. Instead, I could use the property "Items Owned []", which gives a bunch of things, and then I search the TypeString of these things until I have find one that is "Chassis". Fair enough. Then the ref chassis gives me the Modules and the Modules of give me the channels. Seems pretty good. But all I get are the names of channel. I can't find all the properties that define the type of module or the direction of IO. For example, I would like to know if a variable is a Boolean or real, and if it is a path of entry or exit. You can deduct that the names 'standards', if the project has not been changed to allow giving them a meaningful name to create or. But it looks like there should be a way to find these properties directly.

  Any ideas?

  TIA,

  DaveT

  I think that the analysis of the project tree is a quite fragile strategy that you should know already. AFAIK the OR sanctioned for this sort of thing for a few years now is to use the API of the System Configuration. Yes, it's a pretty involved API and need you a little time to learn how to get the specific information you are interested in. Fortunately there are some examples that you can use to start with.

• Global variables are accessible from the local computer

  While he was trying to use RT project, I can deploy the file to the RT target and communicate with the host using a shared variable.

  But the host VI file returns an error stating that the shared in the pattern-block VI host variable is illegal.

  (RT.lvib\Link reqd\ 'shared variable' node is illegal)

  It also gives a description mentioning that global variables are accessible only to local machines.

  What is the cure?

  Hi Shan21,

  I think your problem with communication between the aim of RT and the host PC might be caused by how your deployment of your variables. Please take a look at the following and let me know what you think,

  Kind regards

  ******************************************************************************************************************************************

  When you make the executable of a project using shared variables, you must have a local copy of the variables on the deployment computer that are then linked to the 'real' shared variables stored on the target - cRIO, in this case.

  This means that the display of your project should look like this:

  

  Note: Two libraries, which can have variables with the same name because they aren't both on the local computer.

  The steps required are:

  1. create variables shared in the normal Manor on the cRIO:

  

  a. right click on the target
  b. new > Variable
  c. properties of the variables enter the name (stop); Data type (Boolean) and the Variable type (always in network-published).

  2. create variables shared on the host PC:
  a. follow the steps 1 a - c
  b. right click on the box to enable anti-aliasing

  

  c. linking to the URL of the PSP, click on Browse - and select variable on the target:

  

  d. click Ok.

  Note: Remember also to deploy the shared manually variable llb. See the related links for more information.

  It's from a base of knowledge to write soon.

  Note:3UCBHM8T knowledge base: how to deploy network Variables shared a compiled executable

• I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hi BrendaMay,

  Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.

  Kind regards

  SAP

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Pass a variable value set to the selector to the Listview

  This was probably picked several times on the forum, but I'm going crazy with research and try to do things with my code.

  Everything I'm doing is to expose the variable rssmobileEnabled defined in the SELECTOR, so that I can go and test it in my LISTVIEW onSelectedValueChanged IF statement, according to the code below.

  I did the variable in "BOLD" below to indicate. This must be a simple solution, after all how it can be difficult to just define a global variable...

  The SELECTOR code:

   Picker {
      id: picker
      title: "Select Feed"
      dataModel: XmlDataModel {
       source: "models/blackberry.xml"
      }
  
        pickerItemComponents: [
            PickerItemComponent {
                  type: "rsslink"
                  content: Container {
                  layout: DockLayout {
                  }
                       Label {
                           multiline: false
                           text: pickerItemData.text
                           textStyle {
                                base: SystemDefaults.TextStyles.SubtitleText
                           }
                        }
                    }
               }
          ]
  
     onSelectedValueChanged: {
         var rsslinktext = (dataModel.data([ 0, picker.selectedIndex(0) ]).text);
         var rsslink = (dataModel.data([ 0, picker.selectedIndex(0) ]).rssSource);
         var rsslinkquery = (dataModel.data([ 0, picker.selectedIndex(0) ]).rssQuery);
         var rssmobileEnabled = (dataModel.data([ 0, picker.selectedIndex(0)]).mobileEnabled);
  
          //Load the selected feed
          dataSource.load();
     }
  } // Picker
  

  Code of the LISTVIEW:

              ListView {
                  id: myListView
  
                  // Associate the list view with the data model that's defined in the
                  // attachedObjects list
                  dataModel: dataModellist
                  layout: StackListLayout {}
                  listItemComponents: [
                      ListItemComponent {
                          id: header
                          type: "header" //"item"
  
                          //custom components used instead of standardlistitem
                          Container {
                              Label {
                                  id: emptytextheader
                                  text: ""
                              }
                          }
                      },
                      ListItemComponent {
                          id: item
                          type: "item" //"description"
  
                          Container {
                              layout: DockLayout {}
                              //custom components used instead of standardlistitem
  
                              Container {
                                  id: itemdetails
                                  Label {
                                      id: title
                                      text: ListItemData.title
                                      //textStyle.fontWeight: FontWeight.Bold
                                      multiline: true
                                      textStyle.color: Color.Cyan
                                  }
                                  Label {
                                      id: pubdate
                                      text: ListItemData.pubDate
                                      textStyle.color: Color.create("#ff00c200")
                                      textStyle.fontSize: FontSize.XSmall
                                  }
                                  Label {
                                      id: description
                                      text: ListItemData.description
                                      textStyle.fontSize: FontSize.Small
                                      multiline: true
                                      textStyle.color: Color.Yellow
                                      maxHeight: 130.0
                                  }
                              }
                          }
                      }
                  ]
  
                  onTriggered: {
                      var feedItem = dataModel.data(indexPath);
                      var page = detailsPage.createObject();
  
                      if (rssmobileEnabled == "y")
                          {
                              .....
                          }
                  }
              }
  

  Hello

  "var rssMobileEnabled" declares a local variable, is not available in onTriggered.

  Declare it as a property instead:

  TopLevelItem
  {
     property bool rssMobileEnabled
     (or 'property string' if it's a character)
  

  reference it without prefix "var":

  rssMobileEnabled =...

  You can also declare the property on another element (not necessarily higher level) and reference it by id:

  elementId.rssMobileEnabled

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• Definition of Variables of severity of the code in the State

  HI -.

  Maybe it's somewhere in the docs, but I have not found.

  I have two Linux boxes that run a set overlapping process. One is the master, the other is a failover. What is currently the captain should be run all three processes, the other should be run only two. Because I'm not sure at any time which machine is going to be the master, I don't want to have two separate rules for watching these machines. I have the updated AppMonitor in place on the two processes at all three to the search. I can now determine the processes that are running on each machine:

  AppMonitor #InstancesFound = procA_on_machine1 where monitoredHost.name like machine1% and Application like '% procedure % '.

  AppMonitor #InstancesFound = procA_on_machine2 where monitoredHost.name like computer2% and Application like '% procedure % '.

  etc.

  Let's say that machine1 is the failover box and it runs only a process that is supposed to work. I want to set a Variable of severity level to Computer1 and another for the name of the process that is not running so that I can build an e-mail message that makes sense given the current state machines.

  So, how do I do (can I?) set a Variable of severity of the Groovy in the state code?

  Thank you

  -Craig

  You can define groovy expressions separated by a severity level, independent of the code of the state variables.

  for example

  the name of the expression: currentActiveNode

  expression:

  AppMonitor #InstancesFound = procA_on_machine1 where monitoredHost.name like machine1% and Application like '% procedure % ' #.

  If (procA_on_machine1 > 0) {return "Computer1"} else {return "Computer2"}

  the name of the expression: currentPassiveNode

  expression:

  AppMonitor #InstancesFound = procA_on_machine1 where monitoredHost.name like machine1% and Application like '% procedure % ' #.

  If (procA_on_machine1 > 0) {return "Computer2"} else {return "Computer1"}

  (Not really sure that the exact data you need, just an example)

• The Variable value based on the results of SQL query

  With the help of OBIEE 11.1

  Is it possible to set the value of a variable presentation of the results of a SQL statement?

  Scenario:

  I have 2 topics.

  SubjectArea1

  Text1

  Date1

  SubjectArea2

  Field1

  Field2

  UpdateDate

  I have an analysis that uses only the SubjectArea2.

  Using a dashboard quickly, the user must be able to select Text1 in the other topic area (SubjectArea1).

  Assuming that selection will be stored in a variable of presentation (SelectedText),

  The filter in the analysis should be something like

  Upper UpdateDate to @{SelectedDate}

  How can I set a variable (SelectedDate) using a SQL statement?

  Something like this:

  SELECT "Date1" TO "SubjectArea1" WHERE "Text1" = @{SelectedText}

  So the command prompt text selection should give a date that is used to filter the second review?

  If so:

  The prompt on SA1.textCol

  hidden analysis who is invited on SA1.texCol has SA1.dateCol in the criteria

  Analysis SA2.dateCol is filetered on basis of the results of another analysis (any value analysis hidden SA1.dateCol)