Variations on the entrance table

Similar Questions

• How can I connect 2D Boolean table at the entrance to the structure of the case?

  Hello

  I would like to know how to solve this problem. I try to connect the output of a digital 2D painting and a constant number of 'BIG' before you connect it to the entrance of the structure of the case. An error message appears and it shows ' the type of the source is a 2D boolean array. The sink type is Boolean "."

  I tried to 'disable indexing' on the box of the structure of the case, but the error remains. Would appreciate any comments on it.

  Entry 0 third entry in the index table, not the other.

• update of the table at the entrance to the page

  Hello

  What is the best way to update a table at the entrance to the page?

  I have a file I need to add a value of 1 for once it is loaded (it is not a counter)

  By default, the value is 0 added by mysql. I want to update for when the user saw that record when the page loads message.php for this page id.

  I did until now, but I want to submit without going through a button on the page.

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "update_message_status")) {}
  $updateSQL = sprintf ("mailbox to UPDATE the VALUE displayed = %s WHERE mailbox_id = %s",
  GetSQLValueString ($_POST ["watched"], "text").
  GetSQLValueString ($_POST ['mailbox_id'], "int"));

  @mysql_select_db ($database_db, $db);
  $Result1 = mysql_query ($updateSQL, $db) or die (mysql_error ());

  $updateGoTo = "message.php? id ='". $row_messagesList ['mailbox_id] "]." ' « ;
  If (isset {}
  $updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;
  $updateGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $updateGoTo));
  }

  < do action = "<?" PHP echo $editFormAction;? ">" method = "POST" name = "update_message_status" >
  < input name = "mailbox_id" type = "hidden" value = "<?" PHP echo $row_messagesList ["mailbox_id"];? ">" / >
  < input name = "consulted" type = "hidden" value = "1" / >
  < input type = "hidden" name = "MM_update" value = "update_message_status" / >
  < / make >

  Thank you

  your code all the junk and put something like this:

  @mysql_select_db ($database_db, $db);
  $mailbox_id = "-1";
  If (isset($_row_messagesList['mailbox_id'])) {}
  $mailbox_id = $_row_messagesList ["mailbox_id"];
  }
  $updateSQL = sprintf ("mailbox to UPDATE the displayed VALUE = '1' WHERE mailbox_id = %s", GetSQLValueString ($mailbox_id, "int") ");
  $Result1 = mysql_query ($updateSQL, $db) or die (mysql_error ());

• Special characters in the filter table

  Hello

  JDev 11.1.2.4

  I have a filter table displayed in the selectOneChoice form. The entrance is the character *. If I select this element in the LOV and run filtering, the * is retired (I checked the generated SQL code). I don't have the issue of another 'normal' value such as EN, (SQL CODE generated a where CLAUSE with the value selected as well as the '%' character. Is it possible to use * as a filter?

  Thank you

  Got what you have to escape the social characters of qbe. However, it requires little code. You can watch https://tompeez.wordpress.com/2013/02/16/jdeveloper-11-1-1-6-0-escape-qbe-operators-in-filterable-tables/

  When I introduced the technique.

  Timo

• Cannot create indexes on the flow table

  Hello

  I'm new to ODI.

  The problem is that during the execution of an interface, I get the error of the "IKM Oracle Dimension to slow variation"

  The command in step "Create unique index on the flow table:

  creating index < % = odiRef.getTable ("L", "INT_NAME", "A") % > idx

  on < % = odiRef.getTable ("L", "INT_NAME", "A") % > (< % = odiRef.getColList ("", "[column]", ",", "", "SCD_NK") % >)

  < % = odiRef.getUserExit ("FLOW_TABLE_OPTIONS") % >

  generate the following statement which lacks the name of the column between the (_)

  Create index I$ _MYTABLE_idx

  I have $_MYTABLE)

  NOLOGGING

  The result is that the interface fails with the error 936: 42000: java.sql.SQLException: ORA-00936: lack of expression caused by the previous command wrong.

  Please, can you help me?

  Thank you very much

  Angelo

  Hello

  I'm really really sorry! I just realized that you are working on the SCD. Basically, you are looking for all the column mapped as SCD_NK (key to slowly change natural Dimensions) insofar as shown here

  Substitution QAnywhere

  IF you need to read this

  SCD Type 2 - ODIExperts.com

  Let me know.

• get information from inside a trigger of the other tables in the schema even

  Addendum:
  
  ... Sorry I forgot: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64 bit
  
  *******************
  
  Hello
  
  I'm trying for a few hours to get information from inside a trigger to another table in the same pattern.
  
  My trigger is PSE_BKB. NUM_PHANTOM_BP
  
  I first tried a simple solution...
  
  
  CREATE OR REPLACE TRIGGER PSE_BKB. NUM_TR_PHANTOM_BP
  BEFORE DELETING, INSERTION OR UPDATE
  ON PSE_BKB. NUM_PHANTOM_BP
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  DECLARE
  
  v_recht NUMBER (1): = 0;
  v_recht2 NUMBER (1): = 0;
  v_change_mitarbeiter NUMBER (1): = 0;
  v_recht_mitarbeiter NUMBER (1): = 0;
  v_typ varchar2 (20);
  v_obj_key varchar2 (11): = "gugus";
  v_ph_key varchar2 (11);
  -ph_key varchar2 (11);
  v_obj_keys varchar2 (4000): = ', ';
  
  anz_num NUMBER: = 0;
  anz_num_tmp NUMBER: = 0;
  anz_st_si NUMBER: = 0;
  
  
  BEGIN
  
  ...
  Select count (*)
  in anz_num
  of pse_bkb.num_objekt o
  where o.obj_key in
  (select distinct (ov.obj_key)
  of pse_bkb.num_objekt_verb ov
  where ov.phantom_key =: old.phantom_key
  )
  and o.typ = "NUM";
  
  ...
  
  Explanation: my trigger table is PSE_BKB. NUM_PHANTOM_BP.
  
  On the pse_bkb.num_objekt_verb of the table, I have a relationship 1: n to one or several object-key (field named obj_key!) on my referenced key: old.phantom_key. With this obj_key, I want to watch the weather, I have one or more lines in the table type num_objekt "NUM". So the internal selection gives me all the num_objekt_verb obj_key with my: old.phantom_key and with whom I count the number of lines I have on num_objekt with type "NUM".
  
  The problem is that the trigger does not see the table.
  
  I tried many variations.
  
  The latest version I tried was with a cursor inside the trigger definition as in the block of code below.
  
  For debugging purposes, I inserted a RAISE_APPLICATION_ERROR in the inner loop - see below. The v_obj_key variable is never defined, as in all the other variations, I tried-, I still see the predefined "gugus" in the declare section.
  
  It seems that oracle can not read other tables at this point. La: old.phantom_key is defined (in this simple example there would come a return obj_key).
  
  Thanks in advance for your help - and excuse my English.
  
  Trigger code:
  
  CREATE OR REPLACE TRIGGER PSE_BKB. NUM_TR_PHANTOM_BP
  BEFORE DELETING, INSERTION OR UPDATE
  ON PSE_BKB. NUM_PHANTOM_BP
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  DECLARE
  
  v_recht NUMBER (1): = 0;
  v_recht2 NUMBER (1): = 0;
  v_change_mitarbeiter NUMBER (1): = 0;
  v_recht_mitarbeiter NUMBER (1): = 0;
  v_typ varchar2 (20);
  v_obj_key varchar2 (11): = "gugus";
  v_ph_key varchar2 (11);
  -ph_key varchar2 (11);
  v_obj_keys varchar2 (4000): = ', ';
  
  anz_num NUMBER: = 0;
  anz_num_tmp NUMBER: = 0;
  anz_st_si NUMBER: = 0;
  
  
  BEGIN
  
  
  Start
  declare
  
  cursor nums is
  
  Select obj_key
  of PSE_BKB.num_objekt_verb
  where phantom_key =: old.phantom_key;
  
  Start
  
  for the RC looping nums
  v_obj_key: = cr.obj_key;
  
  RAISE_APPLICATION_ERROR (-20099,' AGAIN 9 v_obj_key: ' | v_obj_key |) ': old.phantom_key ' | (: old.phantom_key);
  
  When the exit nums % NOTFOUND;
  
  Select count (*) in the pse_bkb.num_objekt anz_num_tmp where obj_key = v_obj_key and type = "NUM";
  anz_num: = anz_num + anz_num_tmp;
  end loop;
  
  end;
  end;
  
  Published by: user832075 on 14.01.2013 06:18

  The reason why you get count_n = 0 in tr_c is that there is no line in B with key_c = 17, to the moment you arrive at tr_c. The removal of B has already occurred, and since you're in a single transaction, the application for tr_c:

  select count(*)
    into   counter_n
    from   a aa
    where  aa.key_a in (select distinct(bb.key_a)
                        from   b bb
                        where  bb.key_c = v_ph_key
                       )
    and    aa.typ = 'n';
  

  'knows' that the row has been deleted then gets a number of 0.

  I added a set of instructions dbms_output to show the order in which triggers run, and that's what I get:

  SQL> delete from b_vw where key_a = 1 and key_c = 17 ;
  in trigger b_tr_vw
  In tr_b
  in tr_c
  delete from b_vw where key_a = 1 and key_c = 17
              *
  ERROR at line 1:
  ORA-20077: Remark: counter_n: 0 counter_s: 0 v_ph_key: 17 old.key_c: 17
  new.key_c:
  ORA-06512: at "OPS$ORACLE.TR_C", line 38
  ORA-04088: error during execution of trigger 'OPS$ORACLE.TR_C'
  ORA-06512: at "OPS$ORACLE.B_TR_VW", line 17
  ORA-04088: error during execution of trigger 'OPS$ORACLE.B_TR_VW'
  

  Thus b_tr_vw trigger is triggered first and deletes a B. trigger fires tr_b as part of this statement to remove and check against A, happening apparently so no error is triggered and succeeds the removal of B. Now tr_b_vw takes back control and deletes C. Since the B line which has key_c = 17 already deleted a control for counter_n > 0 and counter_s = 0 fails and raise you the-20002 error. Note that I'm assuming that the error of-20077 you lift is just to see the values and is not intended to be part of your actual code.

  Because I have really no idea what you're trying to accomplish here I can't offer a lot of advice that you might want to try entering two tr_c of the tr_b_vw trigger validation queries before deliver you the removal of b and put the counter_n > 0 and counter_s = 0 control under tr_b_vw to decide whether or not you want to remove.

  John

• Limit the rows of the fact Table by using a table Dim - 10 g

  Hello
  
  I'm having some trouble trying to restrict the result to a fact table using a Dim picture (assume that the example below).
  
  -----DIM A-------------------------------FACT B--------------
  ID-Code - Id_Date - Id_Dim - value
  1---ABCD---01-01-2011---1---10
  2---XYZ---02-01-2011---2---20
  3---RST---03-01-2011---1---30
  ----------------------------------04-01-2011-------3------------40
  
  I want to show only the rows where Dim.Code = 'ABCD '. I know on the MDB, I choose the LTS of the fact table and on the content tab, on where clause insert: Dim.Id = 1, but I don't want to be limited by Dim.Id, I want to limit by Dim.Code and who cannot do this way.
  
  What I did on the LTS of the fact table, on the tab general got the fact Table on the mapped tables and I added the table Dim doing a join internal between the fact Table and the Table Dim. This way when I go to the content tab, I can do: Dim.Code = "ABCD" because the tables are attached now.
  
  Is it bad to do? Is there a better way to solve this problem?
  
  Before ask you I can't do it directly on the table of the Sun because this chart Dim is used in other Tables of facts. Creates an alias for the Table Dim and limit there the way forward?
  
  I hope that I was clear, thank you

  The way you do it is correct. If you have only one or two measures, then you could also do it using logical columns with the filter function.

  table of facts, for example:
  value = (unfiltered, do not show in the layer close)
  Value of ABCD = (filter (value using dim code = "ABCD"))

  Then you can expand this without having to create a table of facts for each variation:
  value = (unfiltered, do not show in the layer close)
  Value of ABCD = (filter (value using dim code = "ABCD"))
  Value of XYZ = (filter (value using dim code = "XYZ"))
  First value = (filter (value using dim code = "RST"))

  etc. Contrary to the statements of case, it pushes the return filter logic to the database (you get a where clause clause). Kind regards

  Robert

• Overview of the printing table of formulas

  Overview of the printing table of formulas

  I have a very simple question, you would think.

  In the Pages, I added a simple table. Several simple formulas are added to this table. Now, if you select one of these cells that contain a formula, all of the cell that are involved in this formula is colored. See attachment.

  No I want to print my full, showing the colors of these formulas. Just check t if everything is included in these formulas. Seems very simple, if I can't find the (characters)? option, I can't find the answer to this question here again...

  Does anyone now if and how do?

  It would be great!

  Thank you, Joep

  

  Hi Joep,

  When you print, the selected cells are deselected. The colors will not display.

  The only thing I can suggest is to place a screen shot in a document of numbers (Menu > insert > choose...)

  In another journal (tab) or any other document and print that.

  Kind regards

  Ian.

• By the numbers, how do the list tables on the side?

  By the numbers, how do the list tables on the side? It used to be on the side, now it is on the top which is a huge pain.

  This changed in the transition from Numbers2.x too 3.x.

  Unless you explicitly removed numbers 2.x, it is always installed and usable on your computer.  You can locate it in the folder "/ Applications/iWork ' 09.

  You should be aware, that numbers 2.x cannot open files saved numbers 3.x - you can export files from Numers3.x back to Numbers2.x by using the item of menu numbers 3.x "file > export to > number ' 09»

• Firefox 4 ignoring the property table (&lt; td &gt; &lt; table &gt;)

  I'm working on the upgrade of the https://addons.mozilla.org/en-US/firefox/addon/156940/ for Firefox 4 compatibility extension.

  Essentially extensions improves the site by adding a few query fields that are locked in the format "table > < td > <. There is no problem up to FF 3.6.9. But at 4 FF, it ignores the < td > < table > properties.

  But it works with any questions on the latest versions of chrome and safari

  This is because the code is wrong.
  
  You're lucky it works in Firefox 3.6, but Firefox 4.0 is more strict.

  You try to add items TD to the innerHTML of an another TD element and it does not work.

  <td id="navSearchBar" class="navSearchBar">Search</td>

  You need to add < table > < / table > around code.

  This code should work:

  			if (lsa[0] == "jp")
  			{
  				searchTxt = "<table><td style=\"font-weight:bold; font-size:13px; padding-right:5px;\"><span style=\"float:left; width:28px;\">" + searchTxt + "</span></td>";
  			}
  			else
  			{
  				searchTxt = "<table><td style=\"font-weight:bold; font-size:13px; padding-right:5px;\">" + searchTxt + "</td>";
  			}
  			if (lsa[0] != "ca")
  			{
  				searchTxt += "<td style=\"padding-left:3px;\"><select id=\"p_76\" name=\"p_76\"><option value=''>Any<option value='1'>Prime<option value='1-'>Free</select></td>";
  			}
  			searchTxt += "<td style=\"padding-left:3px;\"><select id=\"pct-off\" name=\"pct-off\"><option value=''>0-100% <option value='10-'>10% <option value='20-'>20% <option value='30-'>30% <option value='40-'>40% <option value='50-'>50% <option value='60-'>60% <option value='70-'>70% <option value='80-'>80% <option value='90-'>90%</select></td></table>";
  			searchObj.innerHTML = searchTxt;
  

  (corrected the text that got deleted by a previous edition)

• Mobile based on the size and the position of the other table

  I have the impression that there is an easy solution for this... or it there is no solution at all... but here goes:

  I want to use table 2 to indicate 'total time' as the sum of all time in table 1. Table 1 is set to automatically filter some lines (basically, it creates a dynamic playlist based on certain criteria). What I wish is to table 2 'float' a certain number of Table 1 below, so that as table 1 grows or shrinks according to the filtered content, table 2 remains the same distance from the bottom of table 1. Is - this unreasonable? It seems I've seen tables 'hustles' other tables according to size changes (not the desired effect in these cases, but what I DO want to here).

  Hi mikey,.

  This seems to be the default behavior in Numbers ' 09, but the function may not have been included in 3 numbers. I'm sure someone will test and report on it before long.

  Demo below is in Numbers ' 09.

  

  Coffee table is a double to the top. After positioning the lower level of the original table, I inserted two rows in the original and watched 'push' that the lowest low, keeping the space between them.

  I reformatted the cells in column B, CheckBox and verified that a few of them.

  Then I opened the Reorganize pane. and the filter rule (see the lines "... ") displayed the value:

  By clicking on "see the lines...". "box produces this result:

  

  Note: I had selected all the header cells in column B before starting the filter. The first image was captured after unchecking the checkbox 'display lines... '. "developing the table and leaving only the cells in the (previously) selected filtered lines.

  As mentioned, the example is in Numbers ' 09 / numbers 3 behavior may be different.

  Kind regards

  Barry

• Can't access iscsi with ' error in the evaluation table display iscsilist IndexSizeError:

  I have been using my readyNAS years and today, after having extended a target (in volume), I can't access the Volumes-> iSCSI tab anymore.

  SOS!

  I really need.

  The error I get in FF:

  "Error in the evaluation table display iscsilist IndexSizeError: Index or size is negative or greater than the quantity allowed.

  It's a bit different in Chrome, but it won't let me copy it.

  Error in the evaluation table display iscsilist IndexSizeError: cannot set property 'maxLength' on "HTMLInputElement": the provided value is (-1) is negative.

  Any suggestions please?

  Thank you!

  It was super useful:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/ReadyNAS-2100-error-encountered-uploading-updat...

  I downloaded the update of intermediate as a file and updated firmware to update.

  And now I can access the iscsi again tab.

  MDGM, thanks a lot!

  I'm a happier person now!

• generate the subset of the decimal table to an array of Boolean

  I have a decimal table 1 2 3 4 5 6, and I have a boolean with the same table size 0 1 0 1 1 0.

  How can I retrieve the subset of the decimal table of the corresponding "1" position of the table of Boolean (in this case 5 4 2)?

  The value of the Boolean table are editable (casting either 1 00100), so the size of the array decimal subset is not fixed (1, 4).

  (I assume you mean digital Board. "Décimal" is just a specification of formatting and irrelevant for this)

  Try something like the following (the FALSE case has just wired table in the whole unchanged):

  

  (In case you're dealing with huge paintings, a few performance modifications should be made so that everything goes more in place.)

  (Sorry for the spelling errors, ignore them )

• How the repeating table inside a control valve?

  Hello

  Does anyone know how to make the repeating table inside a control valve in LabWindow CVI? I see that there is option for a Panel to scale content in resizing, but not available for a tab control. Any ideas?

  Thank you very much!

  Weiming

  I don't know, I understand what you're trying to do, but you can set ATTR_SCALE_CONTENTS_ON_RESIZE on each tab panel.

  GetPanelHandleFromTabPage (panelHandle, PANEL_TAB, 0, & tabPanel);
  SetPanelAttribute (tabPanel, ATTR_SCALE_CONTENTS_ON_RESIZE, 1);

• Adding field in the item table programmatically

  Hello.

  I'm doing a generic 'engine' for generating test reports/certificates.

  I made a custom data containing type report item, I used to do a local variables array of report called table of report item items.

  The data type contains generic areas (chain of title elements, a string of type item, etc.) and a container of the element data.

  The idea is to increment the array of items to report with report items and then fill the data container of the element with the fields of for example a Table element container.

  Either that, or just add a field in the report item with the data Table element type.

  But I can't find a way to add fields programmatically in a container.

  Anyone know if this is even possible?

  Found!

  Using from one stage of education, who points to the array of report items using the NewSubProperty method.

  Finished with the following statement:

  Parameters.Report_Element_Array.InsertElements (GetNumElements (Parameters.Report_Element_Array), 1, 0),
  Parameters.Report_Element_Array [GetNumElements (Parameters.Report_Element_Array)-1]. NewSubProperty("Element_Data",PropValType_NamedType,False,"NSE_Report_Table",0)