Various problems of 64-bit Windows 7: Scheduler of tasks, computer do not close, sfc/scannow

Hello

I have a Sony VAIO laptop, running Windows 7 Professional 64 bit (Home Premium 64-bit upgrade) that I had several problems with in the past months. I am considering a factory reset, but I'd rather not if possible. A few months ago, I solved a problem with the message of Bad Pool Header but that seems to be fixed to come up with the BSOD.

Now, occasionally when turn off my computer it crashes, with the fan accelerates sometimes slow down then again randomly. Later (I'm sure) she gets a BSOD and then stops. I did not see coming, I see either the next day with a message like "your computer has stopped unexpectedly" or sometimes I held the power button after becoming impatient.

Then I read an article on reliability monitor and is interested in what might happen, but it had not been updated since September 2013. I looked up why this could happen and discovered that I had to check for it in Task Scheduler. When I open the Task Scheduler I got an error saying that "the selected task"{0}"no longer exists. To see the common tasks, click on refresh. "When I click OK another message pops up saying"Task Scheduler is not available... ". "but when I click OK it shows the first error again.

On another question on this Web site (error message: the selected task "{0}" no longer exists...) I read that I might need to delete some tasks that may be missing. I haven't lived a large part of the list in the Microsoft\Windows folder, but I found that, so far, applications experience and Bluetooth have tasks that create problems. I don't know if I want to just delete these because do not know if they are useful when you work or what they do.

The last problem is when I run the sfc/scannow command prompt with administrator privileges in, he is able to find problems on my hard drive but is unable to correct. I discovered a way to run SFC in the command prompt in Windows Startup Repair (where I learned how). I ran sfc/scannow damaged = f:-/offwindir = f:\windows (drive letter was different) and he didn't show any problems on the drive and has not set the disk problems.

Sorry for the issues. Just didn't know if it would be better to start these issues separately.

Thank you

Zac

Hi Zac,

Thanks for uploading the screenshots.

Connection for the different user account and check if the problem persists there. If it works fine in another user account, then the current account may be corrupted.

See this link to create a new user account and then copy files and settings old user profile to the new user profile

http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

Response and let us know the status.

Tags: Windows

Similar Questions

  • I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

    Original title: cannot find awuvomas.dll

    I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

    I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

    1) update your nVidia/software drivers to the latest version for your model video card + operating system.

    (2) check that the equipment is not defective.

    This is not a Microsoft / number of the operating system.  For additional troubleshooting - contact the manufacturer (nVidia).

  • Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already.

    Just opened a new vista Windows upgrade disc and my computer does not recognize it?  My computer always tells me to put a disc in when it is already.  I can't my PID because I can not install the program.  I can't get help from microsoft because I do not have my PID.  Help please

    Your optical disc drive must be able to read the DVD to install Vista.

    See you soon. Mick Murphy - Microsoft partner

  • Task Scheduler: the remote computer was not pop...

    Task Scheduler: the remote computer could not be found appears when you try to start the Scheduler task to the top program and I am not able defrag my computer either because he says that task scheduler is not running, also failed to start other actions when the Task Manager is open and I am able to remove the connection to another task of computer that is there.

    Click the Start button, type in Services, and then click the Services icon.

    Find the Task Scheduler in the list and check that it is running. If not right click and press start.
  • HP Clubhouse G6 problem starting 64-BIT (Windows 8)

    HP G6 8 64-BIT Windows clubhouse

    PRODUCT: C4M16EA #ABU
    MODEL: g6-2241sa

    When starting my laptop I get the message ' Loading/Starting Windows' or 'prepare auto repair.

    It will always stay as such indefinatly.

    My keyboard is also sense is unresponsive, I can't access all the screens that can help, even if for some reason any 'ctrl + alt + del' seems to work before the HP Logo loads, but causes just the laptop to reboot.

    I tried to turn my cell phone off, remove the power cable and the battery, now the power button for 15 seconds, plug the power cable while leaving the battery and pressing the power button to turn it on, but nothing.

    Now, this problem seems occor after the fall of the battery, I suppose that he would be wrong with the clips.

    but before even the pack fell, the laptop started to freeze, for the first time since I bought it, unfortunaty battery fell as he was frozen, adding probably more to the struggle of laptops every start.

    as I'm just young and still in education I am not proven flexible meaning I don't have an income either.

    So if I need to replace my laptop or any computer component of such, please suggest the cheapest possible you...

    Thank you.

    Unfortunately, my warranty has expired, I thought I was doing he extended but a year and a half, according to moore's law, I should be able to buy a brand knew portable with double technology for the same price as this one. So I decided just let expire and take care of it.

    But overall, the problem has been solved, I left my laptop on one night while I was sleeping and it fixed itself, I guess it was just a matter of waiting.

    In the future, I'll wait and see what happenes before posting for help here.

    Thanks a lot for your suggestion however.

    (I don't know how to mark a thread as solved or resolved).

  • Problems restoring 64 bit Windows Vista - sfc/scannow still find things to fix even if run multiple times in a row

    I had a hard drive failure; However, the operating system has been on another disk, a 250 GB SSD. After replacing the faulty discs, I tried to move Windows Vista 64 bit to a larger 512 SSD concert. I keep running into problems with these efforts. To verify that the 250 GB SSD is clean and ready to be moved, I run the sfc/scannow in SafeMode with network. I run several times now and each time he claims to have found corrupt files and fixed them.

    This is evidence of a virus or other malicious software?

    I try to avoid formatting the drive and having to reinstall all software.

    Suggested actions?

    Hello

    Run SFC in Normal Mode.

    See you soon.

  • Networking a laptop 64 bit Windows 7 with a desktop computer Windows Vista 64-bit

    I have a Dell desktop running 64-bit Windows Vista with a USB connected HP Photosmart printer operating system.  My wife used to have a laptop with an XP operating system and we have had no problem sharing the printer.  Now she has a laptop (HP) laptop to Windows 7 64 bit and fails to print.

    His laptop is connected wireless to Verizon FIOS router (wireless-g, I think).  I am connected by ethernet.

    If I look at a map of the comprehensive network of my Vista PC I can see his laptop and explore appropriate records of (public) level on his hard drive.   Sharing my Vista PC and are discovery options: network discovery:; File sharing:. Public folder sharing:; Printer sharing:; Password protected sharing: Off; The media sharing: Off.  My Vista shows the home network as a WORKING group.

    I use McAfee SecurityCenter and when I open the McAfee network map it also shows my wife's cell phone with its IP address.

    On my wife's cell phone two PCs appear on the map of the comprehensive network of the window and it shows my PC IPv4, IPv6 and MAC address, but if I try to 'Open' from my PC to the icon on the map, I get an error message suggesting I be spelled the name wrong or there is a network problem (error code 0 x 80070035 the network path was not found).  I ran the diagnostic of the error dialog box and he suggested to "make sure that the device allows incoming connections for printing and file sharing", the windows firewall settings.  Its network card qualifies to the network TPEN1, identity, assigned to the Verizon router. It shows his laptop connected by a dotted line (wireless)? to TPEN1 which is connected to a switch.  My PC is also connected to the switch which in turn is connected by a bridge to the Internet.  Options advanced sharing his PC for the home or work (current profile) are set on: turn on the discovery network. Enable file sharing and printing; Turn on sharing so anyone with network access can read and write files in public folders;  Media streaming is disabled; Use 128-bit encryption to protect file sharing connections (recommended); Disable password protected sharing;  Use the user accounts and passwords to connect to other computers.

    Its Norton Internet Security Network security map shows my PC as being in line with trust to full trust level.  It also shows the Swith and 2 generic devices with Shared Trust.

    So... anyone have any suggestions?

    Hello

    Maybe this can help.

    - ---------------------

    This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

    The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

    ----------------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If necessary check specifically Permission/security settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

    ---------------------

    You should consider that many times the final solution could involve total uninstall of the 3rd party security Suits.

    In this case, you can be set at the same level with installing Microsoft Security Essentials which are used in the applications of a native Vista/Win 7 firewall and AntiVirus/AntiSpyware.

    http://www.Microsoft.com/Security_Essentials/

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Have a 64-bit windows vista system. My computer guard shut down while I play bejeweled blitz.

    Tried to update windows and I keep getting error codes: 80070643, 8007371 B, 80070005. My Control Panel may be wrong.

    Hello

    Thank you for using the Microsoft Windows Vista Forums.

    I will need some additional information to help you best.

    O if it works well before?

    O since when are you facing this issue?

    Method 1:

    To perform the clean boot procedure, follow the instructions in the link below.

    Step 1: Perform a clean boot

    Step 2: Enable half the services

    Step 3: Determine whether the problem returns

    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns

    Step 6: Resolve the problem

    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista

    http://support.Microsoft.com/kb/929135

    After checking the problem, turn the computer back to the Normal mode.

    Uninstall or update the program that is causing the problem.

    Check whether the problem is resolved.

    Method 2:

    Analysis of auditor of file system (CFS) that might help you resolve the issue.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command prompt, the following line, and then press ENTER:

    sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

    Follow the instructions in the link below for more information on scan SFC.

    http://support.Microsoft.com/kb/936212/

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • Windows XP was corrupted file & wouldn't work, so charge kit Windows advantage for Vista.Now computer is not registered. Just, I want XP back origin, but are not supplied with the computer installation CD.

    If Windows has a file corrupted in C, does not work, so I loaded the {32-bit} vista advantage kit it is genuine Windows product, I don't have 25 digit code {on pkg only 22digits}. Worked and less (media player would not read DVDs {something about codecs}) for a few weeks, and then all of a sudden it started asking for validation. Now, he tells me that I have less than 20 days to validate product b4 Windows do not work {has already taken my bkgrd screen} I'd rather just go back to XP {that my laptop is designed 4, however Vista capable} & I have no idea what I did when I loaded vista {as well as partitions, fat or? file}. I have had no problems w/XP before & I do not know if some1 piggyback on my computer via a public network caused it or what. Please help me solve this problem somehow! I'm not ignorant but not very savvy computer programs either. I know the basics! Thanks =)-

    Hello RosemaryR,

    1A Windows preinstalled on your computer?

    2. do you have a product key that is provided when you purchased the computer?

    You will need a valid product key to activate your old copy of Windows. You will also need a disk. If Windows was preinstalled on your computer, I suggest you contact the manufacturer of your computer to help you better.

  • No Gecko browsers load Internet sites not based on Windows 7, but they do it on Windows XP. Also Firefox process does not close and the browser can not shut down or restart.

    I tried to install firefox 32 and no site would charge and also the process did not close. I tried to disable ipv6 turning my router settings, so there is that the ipv4 connection and also disabled dns prefetching and define the network to no proxy settings. I uninstalled firefox and tried to reintsall after completely removing everything leaving no trace in appdate local and roaming records and using ccleaner and IObit Uninstaller. Then Firefox would work for a little bit and load Google Facebook and Youtube, when I tried it, but it was very slow, reclassification to the installation of Firefox on my Windows XP that has been improved from 30 to 32. Yet once uninstalled and I tried older versions of Firefox, K Meleon Lunascape and same herd. Flock has worked, but he will soon be unsupported. Finally, when Firefox loaded the CPU usage went from 8% to more than 30% of the Web pages and then loading sites after loading icon appeared. I have other browsers work fine. Right now I use Opera.

    I managed to fix it myself. I did a scan to scan with malwarebytes antimalware pro I had and adwcleaner threat and quarantined everything that the first softare found and cleaned with the second, everything appeared to be remnants of old unisntalled programs. I then had to remove the remains of appdata kmeleon and firefox profiles. I only left the firefox of the records that are the browser files I wanted to keep it light. I then checked for settings. I had windows desfault settings check if I have doen not matter what settings with avg pc tuneup 2011, Tweak Me! UWT 2.2 and used TCP Optimizer to bring the network settings by default by windows to 9000 kbps of download speed (after that I did a network speed test). Now firefox is super fast and xcloses normally.

  • Error when you try to publish movies with Windows Movie Maker: another user is running Windows Movie Maker on this computer. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again.

    Movie Maker will not film because of "another user is running Movie Maker on this computor... publish »

    I'm trying to publish a movie on this computor in Windows Movie Maker. The files are .wmv with a band his .wav and are all stored on my computor. I performed this task with success several times and there is enough free space on the computor.

    When I click on publish, there are a few seconds where he tries to publish, but then the program goes into a gel and the dialog box appears with the following: "another user is running Windows Movie Maker on this computor. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again".

    When I click Close, there is an icon of wmv on my desk with the title of my project, but it is empty. I am the only user on this computor and I am puzzled as to why this should be implemented. I tried to turn the filters but nothing helped. One thing that I tried was to publish the band sound and the titles and credits without video files and I found it worked.

    Any ideas?

    Thank you Volenteer J. How would you like to know if a .wmv file is corrupt? Is there something I can do to click the .wmv files that tell me if they are corrupt? I need to identify the files that are causing my problem.

    ==================================================
    Sorry... but it seems that I have more questions than answers.

    You said initially that you could publish the soundtrack and titles with success...
    I was wondering if you tried to add a .wmv file to see if you could publish?

    What was the source of the. WMV files? They are all from the same source?

    They were converted from another format? If_Yes_ maybe another
    Converter would be worth a try.

    You change them widely? (split, rotation, transitions...)

    There is a possibility that you could import the Windows Media .wmv files
    Encoder and convert them to... .WMV to .wmv. Seems pointless, I know...
    but it would create a new .version of the. WMV files and can fix that
    perhaps never the problem.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Windows Media Encoder 9 Series
    http://download.CNET.com/Windows-Media-Encoder/3000-2212_4-14887.html

    Using Windows Media Encoder 9 to convert a video file to .wmv
    http://help.UNC.edu/3940

    Re-index WMV files
    http://www.jhepple.com/support/reindexwmv.htm

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Get the Message After that recent Windows 7 update for this computer is not running Genuine Windows

    I bought this directly from computer to DELL 9 months ago. After the last update of Windows 7, I get the Activation screen pop up:

    "This computer is not current running Genuine Windows"

    I tried some of the suggestions on the community forum - did not work.

    I tried to re - activate Windows by phone - rejected

    I tried to follow the directions on the error screen - unfortunately, I seem to get lost in an infinite loop, tried to contact MS Support by eMail... I can never get the screen to contact technical support by email.  I'm trying this.

    This is the form of the output of the MS Genuine Advantage Diagnostic Tool:

    Diagnostic report (1.9.0019.0):
    -----------------------------------------
    Given WGA-->
    Validation status: genuine
    Validation code: 0

    Code of Validation caching: 0x0
    Windows product key: *-* - M3DJT - 4J3WC-733WD
    The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
    Windows product ID: 00371-OEM-8992671-00524
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {DF706470-8353-4FE0-BF91-B476B1CC9AD5} (3)
    Admin: Yes
    TestCab: 0x0
    WGA Version: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.160121 - 1718
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    WgaER data-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    WGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 114 blocked VLK 2
    Microsoft Office Professional Edition 2003-114 blocked VLK 2
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {DF706470-8353-4FE0-BF91-B476B1CC9AD5}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3549810005-129049543-177520327Dell Inc.. Inspiron 3847 Dell Inc.. A06 20150115000000.000000 + 0005BFC3507018400F404090409Mountain Standard Time(GMT-07:00)03DELL WN09 114114Microsoft Office Professional Edition 20031159D1605114E3500vfZmaSmFPIYrLWTcZSZErUQg Fo plus73931-640-0000106-5735514

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00178-926-700524-02-1033-7601.0000-1252015
    Installation ID: 001012827913503504119443300805063884364523993301059480
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 733WD
    License status: licensed
    Remaining Windows rearm count: 2
    Trust time: 16/02/2016 10:26:03

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: 0x00000000
    Beyond: 0 x 0000000000010240
    Event timestamp: 2:11:2016 10:23
    WAT Activex: registered
    WAT administration service: registered

    --> HWID data
    Current Hash HWID: LgAAAAEAAQABAAEAAAACAAAAAgABAAEAln1 + zOI4/OXyG2qmZoCBP/rNYBDI9g is

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC DELL WN09
    FACP DELL WN09
    HPET DELL WN09
    MCFG DELL WN09
    FPDT DELL WN09
    ASF! INTEL HCG
    WN09 DELL SLIC
    SSDT PmRef Cpu0Ist
    SSDT PmRef Cpu0Ist
    SSDT PmRef Cpu0Ist
    SSDT PmRef Cpu0Ist
    MSDM DELL WN09
    LAURENCE INTEL HSW

    Thank you for your response.

    This is on a DELL computer.  I contacted DELL support and they have a bulletin on the basis of their knowledge.  The bulletin has a number of solutions for fixing this updates the BIOS including instructions, and updates the driver Intel.  For me, the update of the BIOS seems to have solved the problem.

    http://www.Dell.com/support/article/us/en/19/SLN104591/en

  • Popup "Windows Activation Technologies", saying "this computer is not running genuine Windows". 0x8004fe22 validation error

    I haave had this since 2008 HP Pavilion desktop computer.  It came with Win 7 Home installed, and Office Depot had upgraded to Win 7 Pro.  I ran it without any problem of validation for more than three years now.  Tuesday I'll be back for an appointment and the computer went to sleep.  When he woke up normally, I found a 'Windows Activation Technologies' popup saying "this computer is not running genuine Windows".  I tried the link "pay online now", but he ordered me to have to pay for a new facility.  I do not want to do because my Windows has already been purchased and is valid for more than three years.

    Then run Windows Genuine Advantage Diagnostic tool and it came true.

    Diagnostic report (1.9.0019.0):

    -----------------------------------------

    Given WGA-->

    Validation status: genuine

    Validation code: 0

    Code of Validation caching: 0x0

    Windows product key: *-* - PQXXH - YV9X4-W9RHT

    The Windows Product Key hash: eoAuGpzqza0N5Rq8GmfThaa7MtY =

    Windows product ID: 00371-618-0336466-85959

    Windows product ID type: 5

    Windows license type: retail

    The Windows OS version: 6.1.7601.2.00010100.1.0.048

    ID: {84F94BAF-6CEE-4CD5-96A3-E47F7B917F2F} (1)

    Admin: Yes

    TestCab: 0x0

    WGA Version: N/a, hr = 0 x 80070002

    Signed by: n/a, hr = 0 x 80070002

    Product name: Windows 7 Professional

    Architecture: 0 x 00000009

    Build lab: 7601.win7sp1_gdr.120330 - 1504

    TTS error:

    Validation of diagnosis:

    Resolution state: n/a

    WgaER data-->

    ThreatID (s): n/a, hr = 0 x 80070002

    Version: N/a, hr = 0 x 80070002

    WGA Notifications data-->

    Cached result: n/a, hr = 0 x 80070002

    File: No.

    Version: N/a, hr = 0 x 80070002

    WgaTray.exe signed by: n/a, hr = 0 x 80070002

    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->

    Cached result: n/a, hr = 0 x 80070002

    Version: N/a, hr = 0 x 80070002

    OGAExec.exe signed by: n/a, hr = 0 x 80070002

    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->

    Office status: 100 authentic

    Microsoft Office Publisher 2007-100 authentic

    OGA Version: N/a, 0 x 80070002

    Signed by: n/a, hr = 0 x 80070002

    Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->

    Proxy settings: N/A

    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

    Download signed ActiveX controls: fast

    Download unsigned ActiveX controls: disabled

    Run ActiveX controls and plug-ins: allowed

    Initialize and script ActiveX controls not marked as safe: disabled

    Allow the Internet Explorer Webbrowser control scripts: disabled

    Active scripting: allowed

    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->

    Office details: {84F94BAF-6CEE-4CD5-96A3-E47F7B917F2F}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-W9RHT00371-618-0336466-859595S-1-5-21-2646128604-217356146-35614142HP-Pavilion,NY544AA-ABA p6210fAmerican Megatrends Inc.. 5.17 20090724000000.000000 + 000C7263D07018400F204090409Central Standard Time(GMT-06:00)03HPQOEMSLIC-CPC100100Microsoft Office Publisher 20071221A0B52A164FEBCGeuvSw31eIcMjxhj/ZUT54M71Ts =89404-862-3928931-638678

    Content Spsys.log: 0 x 80070002

    License data-->

    C:\Windows\system32\slmgr.vbs(22, 1) (null): library not registered.

    Windows Activation Technologies-->

    HrOffline: 0x8004FE22

    HrOnline: 0x00000000

    Beyond: 0 x 0000000000000800

    Event timestamp: 6:4:2012 18:38

    WAT Activex: registered

    WAT administration service: registered

    --> HWID data

    Current HWID hash: PAAAAAIAAQABAAEAAQAGAAAAAwABAAEAonYe3oFEvpSqPn7NwJgrQARthsUgT6li6yrDvLhFGAsZC0Ia

    Activation 1.0 data OEM-->

    N/A

    Activation 2.0 data OEM-->

    BIOS valid for OA 2.0: Yes

    Windows marker version: 0 x 20001

    OEMID and OEMTableID consistent: Yes

    BIOS information:

    ACPI Table name OEMID value OEMTableID value

    HPQOEM APIC-SLIC-CPC

    FACP SLIC-CPC HPQOEM

    HPET SLIC-CPC HPQOEM

    MCFG SLIC-CPC HPQOEM

    LASRYVITRAGE HPQOEM SLIC-CPC

    INFO HPQOEM SLIC-CPC

    NVHD HPQOEM SLIC-CPC

    SLIC SLIC-CPC HPQOEM

    SSDT HPQOEM SLIC-CPC

    I was away yesterday and today I tried the process with a freshly downloaded MGADiag.exe and got a different result.

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE22
    Code of Validation caching online: 0x0
    Windows product key: *-* - PQXXH - YV9X4-W9RHT
    The Windows Product Key hash: eoAuGpzqza0N5Rq8GmfThaa7MtY =
    Windows product ID: 00371-618-0336466-85959
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {84F94BAF-6CEE-4CD5-96A3-E47F7B917F2F} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.120330 - 1504
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Publisher 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {84F94BAF-6CEE-4CD5-96A3-E47F7B917F2F}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-W9RHT00371-618-0336466-859595S-1-5-21-2646128604-217356146-35614142HP-Pavilion,NY544AA-ABA p6210fAmerican Megatrends Inc.. 5.17 20090724000000.000000 + 000C7263D07018400F204090409Central Standard Time(GMT-06:00)03HPQOEMSLIC-CPC100100Microsoft Office Publisher 20071221A0B52A164FEBCGeuvSw31eIcMjxhj/ZUT54M71Ts =89404-862-3928931-638678

    Content Spsys.log: 0 x 80070002

    License data-->
    C:\Windows\system32\slmgr.vbs(22, 1) (null): library not registered.

    Windows Activation Technologies-->
    HrOffline: 0x8004FE22
    HrOnline: n/a
    Beyond: 0 x 0000000000000800
    Event timestamp: 6:6:2012 13:05
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM

    --> HWID data
    Current HWID hash: PAAAAAIAAQABAAEAAQAGAAAAAwABAAEAonYe3oFEvpSqPn7NwJgrQARthsUgT6li6yrDvLhFGAsZC0Ia

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    HPQOEM APIC-SLIC-CPC
    FACP SLIC-CPC HPQOEM
    HPET SLIC-CPC HPQOEM
    MCFG SLIC-CPC HPQOEM
    LASRYVITRAGE HPQOEM SLIC-CPC
    INFO HPQOEM SLIC-CPC
    NVHD HPQOEM SLIC-CPC
    SLIC SLIC-CPC HPQOEM
    SSDT HPQOEM SLIC-CPC

    I ran full virus and malware scan with Avast Pro and Malwarebytes Pro and a complete diagnosis with Advanced System Care Pro tools that have always kept this system clean and stable.  As expected, no malware, regular maintenance tasks only were delivered.  It's been several days since the last time that I made no change to the system (I upgraded a utility) and the system has been rebooted at least four times after that without problem.  The only other change was an update of Windows.  Interestingly, after that same Windows Update on my machine Vista, it refused to start (BSOD) and I had to go back to a two days old restore point - that fixed it.  I always had a mysterious problem with Win 7 Pro machine that it creates restore points, but I can never find, so I can't have this option on this computer.

    I'm trying to start a new business and cannot afford to be without my computer, or do strange things, or buy a new copy of Windows and take the time to restore a careful configuration of three years.  I when I recently bought a new laptop from Office Depot, I also bought a Windows 7 Pro upgrade kit and installed myself.  When I did, I realized that the update CHANGES THE PRODUCT KEY and I knew not when they improved the office... they give me new product key for the Pro upgrade, so all I have is the original OEM key and apparently going to lose my Pro upgrade if I need to reimage from the disks in the system or the OEM partition.  This is not acceptable, either, and I have no idea how to go about face.  The transaction took place three years ago!

    Please help; I'm already running on the razor's edge with the launch of this company.  This error is likely to destroy me financially.  I can't do what I need to do on the laptop - it is a low-cost, minimal machine and specifically, has no office and the ability to perform graphics... things cutting-edge software that I need to be able to do.

    Click Start

    in the search box, type

    System restore

    and press the Enter key

    Once the system restore is displayed, click Next

    Now put a check mark in the box "Show more restore points.

    What points appear now?

    If there is a just before your problem, try this.

    If this isn't the case - as I say, CANCEL any act performed by ASC and uninstall it.

    Then run another MGADiag report and post it.

  • Activated Windows not genuine, SFC/scannow fails

    Hello

    I use DELL Latitude and the windows 7 is installed at the factory.

    It all started when...

    2-3 weeks ago I noticed that my dialog box of Windows features on/off was empty. My updates were not running and MS Windows Essentials was also not corrupted. Maybe this happened after I connected a corrupted USB.

    A registry entry connects to Windows features on / off did not open. "Access denied" I'm sorry that I forgot that we... It had something to do with loading the hive of COMPONENTS . Loading, it does not solve the problem, or perhaps I couldn't load it too.
    So, I asked my friend, running Win7 genuine. He sent me his hive of COMPONENTS . I do not replace the old, I just loaded the new hive of desktop COMPONENTS . This helped. And I was able to enter in the registry tree, but was not able to find the entrance to what I was looking for. Somehow, Windows update has started to work, but I couldn't get Windows features box and nor, I could install Microsoft Essentials. There was error.
    SFC/scannow always gave error "Windows resource protection could not perform the requested operation"

    I do not, at least that update my windows was running again... So, I continued using my PC.

    A week previously, Windows not genuine box began to appear. I tried to solve online. He asked me to download the file WindowsActivationUpdate.exe . I tried to install it, but he said: "this update is not applicable to your computer"

    I tried 3 SLUI and entered the product key. It said "Windows Activation with success", but not authentic Windows error re-appeared next time that I'm logged in.

    Any help?

    How many days should I until windows is no longer available for use?

    Thank you, Mr. Cornell.

    He told me that the key is invalid and asked for the activation of the phone or another key...
    I typed the same key and it worked. !!

    No non-genuine message now.

    should I start another thread on windows power features?

Maybe you are looking for

  • reverse in the lines in a 2D-string table

    Hello I have a simple question.but kind, I tried many things and could not help. I need to reverse a 2D channels in rows.just table to make it clear, I do an example: a, b and c d e f g h i and I want to do g h i d e f a, b and c How can I do this?

  • 7 5 d Mark ii

    I have a 7 D Mark ii underway (with a kind of textbook) and wonder if there is a good 'how' of source to learn how to print the shots of 10 frames per second on my Windows PC laserjet printer. Thanks in advance, leswurse

  • Dynamic URL links open to the last installed only browser

    Hello Whenever I use a hot link URL default is Windows open this link in what is the latest web browser, I have installed -For example, I use Chrome but have installed Firefox also. Any link opens in Firefox never in Chrome. I recently installed Oper

  • How can I stop and then resume when you use the magnetic Lasso tool?

    CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move t

  • Drag and drop the interactive report

    HY!For an interactive report, I would like to implement and drag to order lines.It's a request complex abandoned behind the report (joints, ect.)I need an element hidden like this apex_item.hidden(1, rowid) AS Sort The problem is, that rowid is not h