Similar Questions

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The scheduled scan output of McAfee does not work after update to W - s7

  Hello.After upgrade to W - s7 scan-out expected of McAfee Total Protection 2010, a license does not work on Toshiba Upgrades.Support McAfee program not able to help, worked 3 hours and sent in support - Russian? for us, it is not present. Perhaps who fell on a problem as well. I'll owe for any information. Thank you

  >... does not work on Toshiba upgrade program
  What program does? AFAIK the upgrade Toshiba travels TEMPRO.
  We think the same?

• ColdFusion Developer of 11 does not work after restarting the local computer

  I'm all new to see  I have installed CF developer 11 & attached to IIS.  I'm on a windows 7.  Whenever I have to restart my machine for some reason, the CF administrator will not work, nor any CFM page will work.  I have to completely uninstall CF11 & before reinstalling in order so that it works again.  Any ideas or suggestions as to what might be the cause of this behavior?  Here is the error message I get when I try to hit CF Administrator:

  HTTP status 500 - ROOT CAUSE:

  ---

  type of Exception report

  message ORIGINAL:

  Description The server encountered an internal error that prevents to satisfy this demand.

  exception

  javax.servlet.ServletException: ROOT CAUSE: coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Monitoring service is not available. at coldfusion.server.ServiceFactory.getMonitoringService(ServiceFactory.java:223) at coldfusion.CfmServlet.service(CfmServlet.java:199) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source)  coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) 

  Note Track of the full stack of the root cause is available in the Apache Tomcat/7.0.52 logs.

  ---

  Apache Tomcat/7.0.52

  Can you guarantee that the CF service is running. Also, have you applied the hf1100 - 3776060.jar?

  Kind regards

  Anit Kumar

• Windows Update does not work after reinstalling Windows XP due to the infection by the virus

  Hello

  I have a system of Windows XP with IE8.

  I can't get Windows Update to work. Just crossed another reinstall due to a virus problem and trying to get my operating system again.

  Any help would be appreciated.

  Thank you

  We need to know what type of CPU you have. Follow the instructions in Tricky again. You will see a window that looks like this:

  
  http://KB.Epson-Europe.com/PF/12/WebFiles/article%20Images/operating%20Systems/win%20XP%20-%202000/System_Properties_XP.jpg
  I suspect you have an AMD processor. If so, please read the following:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• VMWare Update Manager Server does not work after changing name of host/IP

  I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.

  I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.

  Here are two mistakes that I get, when you try to activate the plugin Update Manager:

  "The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  That's what I did to change the host name:

  -J' uninstalled virtual UpdateManager 1.0 Clients Center customer.

  -I stopped the Service VMware Update Manager on the update server

  -J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)

  -J' changed the value of the fields

  dbo. VPX_EXT_CLIENT. URL

  dbo. VPX_EXT_SERVER.UR

  -in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)

  -J' restarted the vCenter Server

  -J' started the Service VMware Update Manager on the update server

  -J' installed the client plugin update manager Virtual Infrastructure client

  -J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:

  sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...

  Does anyone have an idea what do I do?

  Thank you in advance.

  I would try just reinstalling the update on existing installation manager.  Do not overwrite the database in the process so that you shouldn't really lose anything.  Not the plugin, but since the Update Manager vCenter installation media.

  Give that a try and let us know how it goes.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.

• Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After I download and visualize the 'air - SDK - description.xml', the version is 21?

  Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After that I have download and view the 'air - SDK - description.xml',

  < name > AIR 21.0.0 < / name >

  < version > 21.0.0 < / version >

  Hello

  We have fixed this problem. Please download a second time to get 22 AIR beta build.

  Thank you

  Krati

  Adobe AIR Team

• Y700 - Dolby Audio does not work after resetting the system

  After resetting my computer to factory settings, audio dolby does not work. This is the error message I get:

  "Your installation is missing components. Reinstall the audio driver or the stand-alone components available on the support site for the manufacturer of your PC. »

  His works on my computer, just not this request.

  Thanks for the help.

  Matt

  I have the same problem, I have a 70-Z40 and the Dolby Digital Plus open, but does not work, you can choose the profile but is not even, I have this problem after the last windows 10 updated a few days ago.

  I hope you can help, thanks in advance

  EDIT: I solved it after a few tries, I don't know if it is the best way, but it's how I solve this problem:

  (1) Delete last windows update (after that, it did not)

  (2) delete the sound driver from Device Manager and reboot (it did not)

  (3) download the driver for my lenovo model page and install it (it did not)

  (4) any uninstall Conexant audio and Dolby of my computer and re - install again (it does not), it seems that my dolby 7.6.4.9 driver version is not correct, I need the 7.5.1.1

  (5) again to uninstall everything and restart

  -From there, he solved my problem

  (6) go on my computer (my system is in Spanish, so I don't know the correct name for the version in English, sorry) and then go to the Lenovo partition, then open drivers > Audio > Setup.exe This will install your Conexant audio driver, and then restart.

  (7) after you restart your laptor, do the same thing... Lenovo > drivers > Audio > DolbyGUI > x 64 > DolbyDigitalPlusHT.msi, and then restart your computer and it should work fine.

  Sorry for my English.

  See you soon

• Envy 15 j139tx: fingerprint does not work after the upgrade to windows 10

  I have improved my ENVY 15 NoteBook Windows 8.1 for windows 10 j138tx. But after the upgrade of my fingerprint also does not work. I have updated software driver and it shows as follows.

  

  And the unit is also working (it is said ;-))

  

  But I can't add my fingerprint in sign in option. It does'nt allow me to set up.

  

  And when I open simple passage, it shows me after the error message.

  

  can someone please help me to reactivate it?

  Hello

  Open windows control panel, open programs and features, make entry for HP SimplePass right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download the version of HP SimplePass on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71729.exe

  Once the download is complete, open your downloads folder, right click on the installer SimplePass and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  When windows has reloaded, open windows control panel and on the top right, next to the display by: select "large icons".  The new layout, select the HP SimplePass entry and see if you can set your footprint digital log - on.

  Kind regards

  DP - K

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?