VBAI 2011, possible to migrate directly to LabVIEW 8.6 code?

Similar Questions

• Is it possible to read a code bar directly in Labview?

  I have a bar code reader that bed codes in Notepad as planned, but I'll have a chance to read a code in Labview 8.6. Is it possible to read a code directly in Labview using a barcode reader. The drive that I use is a symbol DS6708.   Thank you.

  Thanks for the help! Problem solved!

• How to run vision inspection build in VBAI 2011 on PC

  Hi all!

  I am currently working on the machine in VBAI 2011 vision project. First tests of my vision algorithm, I did with the images acquired previously by original camera. I used simulate acquisition for work on these images. When I finished my project on VBAI I decided to migrate my LabVIEW 2011 inspection using the new API, because I create the more complex User Interface. I created as a result of the code:

  

  I got from http://zone.ni.com/wv/app/doc/p/id/wv-2424

  I know not what do I connect Session in the entrance of the VBAI Interface - open Inspection.vi, and my VI work not at all.

  I'd appreciate any help. Please let me know if you had previously same problem and how to solve it.

  You must call launch Local VBAI engine, then the connection to the VI engine. Look at the example in your examples examples/LabVIEW VBAI 2011/API file for how to do this.

  Thank you

  Brad

• Migrate directly or from a backup?

  When dies a Mac - if the hard disk is OK - should migrate directly or from a backup?

  The new Mac check the old file system log to make sure that everything is OK and put the data back in an audited?

  I think that if the Mac died suddenly, I don't know if that hardware problem may affect the data on the hard drive, then perhaps that supports to switch over to a backup. But then there is always the possibility that there could be a problem with the backup. (We have a backup that is no more than an hour old.)

  Thank you in advance!

  If possible I would like to migrate directly, the backup is a good option when you cannot.

• VBAI 2011 takes too long to initialize controls

  Hello

  I work on VBAI 2011 and have 2 controls separately to check the device on the left side and right side device. Two of these inspections are working fine. However, when I add these 2 inspections 1 inspection, my VBAI seem frozen. It took forever to Inspection steps during initialization when I run in the Mode of Inspection, and no errors appear

  I'm curious to know if anyone sees this problem before and how to fix it?

  Thank you.

  Would it not possible to display your inspection? If you don't want it on a public place, let me know and I can send you a private email.

  Thank you

  Brad (National Instruments R & D Vision)

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Is it possible to record directly into iMovie

  I have a Macbook 15 "and there iMovie in it. I have a Logitech 1080 video camera. Is it possible to record directly on the Macbook?

  No, only from the camera into your Macbook.  Details at: http://help.apple.com/imovie/mac/10.1/#/movc665d799a

  You can however make a recording of your Logitech using Quicktime Player or photo booth, and then import the file from iMovie.

  Geoff.

• VBAI 2011 SP1

  Anyone know where I can download this patch for VBAI 2011?

  splee wrote:

  Nope. Impossible to find anything from the link

  Try this one:

  http://FTP.NI.com/support/softlib/vision/vision%20Builder%20For%20Automated%20Inspection/2011%20SP1/...

  Andrey.

• is it possible to migrate lightroom 5 to a new computer? or do I need to buy it again?

  Is it possible to migrate to a new lightroom computer? or should I buy for it?

  You should be able to download Lightroom 5.

  All the details are here: http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/

• Is it possible to migrate ESXi host between data centers, if so please provide a brief not

  Hi friends,

  1. is it possible to migrate ESXi host between data centers, if so please provide a brief walking distance.

  2 can we perform vMotion and Storage vMotion while ESXi is turned on.

  3. is it possible to extend the VMDK disk while it integrates snapshots in it.

  Best regards,

  Sirot Vijay

  Yes the vmotion and svmotion works but one by one.

  1 - vmotion is posssible to power on State, but you can't svmotion the vm simultaneously. The storage will remain same

  2 svmotion is also possible to power on the State, but you cannot vmotion virtual machine simultaneously. the host will remain the same.

  3 vmotion and svmotion is possible together when the vm is off power. the host and storage can be changed simultaneously on this State.

• is it possible to migrate the archives of virtualbox to fusion?

  is it possible to migrate all records of a virtual machine made on Virtual Box on a new merger?

  I mean I want to transfer all the things I have on SLED 11 on virtualbox to my molten SLES11

  There are third-party utilities for the conversion of different virtual disks types other types on the Internet and you can still drive to image and restore a VMware hard.  I used Clonezilla Live to do Imaging Network and image on a USB files and there are also some dd on Linux to create/restore an image to a disk.

• Is it possible to go directly from the development to the lightbox view module in the library module?

  Is it possible to go directly from the development to the lightbox view module in the library module.  Now switch back to default module library in single image view just set to develop the module.  It seems that it should be an option, but I can't find it anywhere. Hope that makes sense. Thank you

  Just press the letter 'G '. This means the display of the grid. And from there, you can select any image and press "D" Brown in the develop module.

• Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Hi all

  My question is quite simple:

  -Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Let's say we have two data centers:

  vcenter1

  -vm1

  -vm2

  vcenter2

  -vm3

  Is it possible to migrate vms between vcenter2 and vcenter1 programmatically? (or vice versa)?

  Also, I'm assuming that the appropriate VLAN and data warehouses across the different vcenters!

  Thank you

  Luis

  It is not possible, vMotion or migration live is in an instance of vCenter, it cannot be covered through two even if you have the data store accessible both vCenters and sets of the host. At best, you can unregister the virtual machine of vCenter 1 host and re-save as on vCenter 2 host, but once again, it is while the virtual machine is turned off.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Is it possible to migrate a planing with different database name application?

  Hi gurus,
  
  is 1] possible to migrate an application planing with different database name via the LCM in EMP 11 utility?
  
  [2] we can migrate application of planning with different names from DB in sys9 too?

  You must update this table, restart planning. You must also rename the database through the Regional service.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Is it possible to migrate the application to the latest version to the old version

  Hi all
  
  I have an adf application in jdeveloper 11.1.1.4.0.Due to some questions that I have to do in jdeveloper 11g release 2 (11.1.1.2.0). Is it possible to migrate the application to the latest version to the old version of jdev.
  
  Thank you.

  I don't think that... If its possible...
  migration of the old is again what I heard jdeveloper world...

  http://blogs.Oracle.com/OLAF/entry/adf_in_action_migrating_to_jde
  http://www.Oracle.com/technetwork/developer-tools/jdev/migratingjdeveloperprojectsto1013-129369.PDF

  Why migration back to old - is not possible because some new features will not be supported by the old