VBAI IMAQdx to acquire initialization sometimes falls down and the ruins of my throat

I have a GigE (FLIR A325) camera from here acquire images in VBAI.  I have several saved inspections and I use the selection of Inspection step to automatically switch between them based on a shared Variable.  I notice that there is an initialization that is performed after each pass an inspection on foot to the other.  Opportunity (actually about 25% of the time) the initialization fails.  The error is always related to the attributes of the camera (could not read or check... something like that).  The thing is that if I force the initialization of repeat by manually opening an inspection, it usually works.  The problem is that as soon as there is an initialization failed, VBAI gives up and stops at the inspection.

Is there a way to force VBAI repeat the initialization on a mistake?  Of course, it would be great if I have no error at all, but I'm afraid that this will be a game between us, NOR and FLIR of finger.

The main concern here is that when VBAI is running in automatic mode, it takes a method to recover errors like that.  When the inspection is stopped, the system just sits there idle and helplessly.

Thank you

Dan press

PrimeTest Automation

Hey Dan,

Unfortunately, it seems that camera does not correctly handle definition of attributes (I guess I'll start the finger pointing). You change any attribute of camera during the inspection? You have several inspection with different parameters? If so, the camera could be in a different State then when you started, and when we close and try to apply the new settings to the step of the acquisition of the re-inspection, the camera does not allow for some of the attributes to be defined, because the current mode is not valid, and they have a problem with the order of things. A debugging tool that will identify the attributes of boredom is WindDbg

http://www.Microsoft.com/whdc/devtools/debugging/installx86.mspx#a

After this installation, you can add an entry to your regitry which turns on all the driver reads/writes about the attributes with status information:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\niimaqdxk\Parameters

Add "AttributeTraceFlags" as a DWORD value

The attribute is a bitmask with the following values:

//--------------------------------------------------------------------------

Operations of attribute we can draw

//--------------------------------------------------------------------------

TraceOperationMask = 0x000F,

TraceGet = 0 x 0001,

TraceSet = 0 x 0002,

TraceValidate = 0 x 0004,

//--------------------------------------------------------------------------

Status codes to track

//--------------------------------------------------------------------------

TraceSuccessMask = 0x00F0,

TraceSuccess = 0 x 0010,

TraceFailure = 0 x 0020,

TraceWarning = 0 x 0040,

//--------------------------------------------------------------------------

Follow the exit to destinations

//--------------------------------------------------------------------------

TraceDestMask = 0x0F00,

TraceDebugger = 0 x 0100,

Trace file = 0 x 0200,

Just so set to 0x01ff to see in the debugger. Once you find what is the problem attribute, you can speak with FLIR to see if they can fix their XML file, or try to make sure that the attribute is in good condition before closing... I would recommend talking with FLIR so everyone can benefit... FLIR can come into contact with OR and we can also help to ensure that their XML is valid if they need assistance.

Hope this helps,

Brad

Tags: NI Hardware

Similar Questions

  • When doing a full backup computer falls down and must be closed

    Hello

    When doing a full backup of the computer falls down and must be closed using the power switch, it is very good when you make a partial backup.
    I'm trying to backup to an external hard drive via a usb connection.

    The hard drive is formatted in NTFS
    Someone has any ideas
    Fred

    Hello

    I will try to resume that you issue.
    The HARD disk has several partitions (I guess 2 partitions)
    The backup procedure works fine if you safe data only from single partition, but it crashes if you try to create a backup of all partitions of set. Am I wrong?

    My first question; What backup utility do you use?
    Are you sure that this backup tool supports the backup of the two partitions at the same time?

    I put t know if it will help but a similar problem happened to me.
    I've used Norton ghost and I wasn't able to create a backup of a partition.

    The procedure began, but after several minutes, the screen goes white and the notebook frisottés.
    I ran the scandisk, chkdsk and I defragment the whole HARD drive.

    This helped!

  • page up and down and the arrow keys do not work, they do on any other programs

    Page up and down and the arrow keys do not work or jump at the bottom of page.

    You may have accidentally entered mode 'Keyboard Navigation. The F7 key will toggle "Keyboard Navigation" on or off.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • My screen is head down and the picture is huge

    Original title - HELP

    My screen is head down and the picture is huge I don't know how to solve this problem.

    Try these in order:

    1 you may have a hotkey enabled for this arrow of ctrl-alt-up/left/right , but this will only work if your updated display driver in place.

    2 on the desktop, right-click graphics options, Rotation - it will be if your display driver has put there.

    3 go to control panel display settings, display, change, settings advanced, {click the large tab that has the name of the author of top display driver}, Graphics Options {or similar term} - then dive around to find the controls - these are all arranged differently, so I can't offer that little will be in but the rotation controls will be there somewhere.

    4 when you find the rotation controls, take a look for the keyboard shortcuts in the same area of the configuration of the display driver - if you ever need to rotate your screen, then you can normally disable keyboard shortcuts to avoid accidentally hitting as you try to do something else [which is probably causing your current problem].

  • connection sometimes slows down and drops onec in awhile

    on a web site as now just everthing slows down and sometimes stops loses connetion HELP

    on a web site as now just everthing slows down and sometimes stops loses connetion HELP

    http://support.Microsoft.com/kb/314095

    How to troubleshoot possible causes of Internet connection problems in Windows XP

    also:

    http://Windows.Microsoft.com/en-AU/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Wireless and wired network problems
     
     
  • Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

    So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

    Update BIOS to the latest version 2.4.0

    In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

    To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

    So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

    It is difficult to find the cause of the problem, because this happens very rarely.

    Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

    When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

    Such computer is out of warranty.

    It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

    No idea what I could troubleshoot?

    Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

    While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

    Desu
    .. .once in a while...

    That will make hard to resolve this situation.

    • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
    • Have you tried another SATA data cable, or reinstall the existing at both ends?
    • Have you reinstall RAM and PCI card in their slots?
    • Have you used canned air to blow out the dust?
    • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
    • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

    If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

    and make sure you have the Office product key too...

  • View the fall down in the region of breadcrumbs

    How can I display a drop-down menu in the region of breadcrumbs on the opposite side of the entrance to breadcrumb? I played with properties if poster and part of the fall down but does not makes all the difference. The drop down menu displays just below the entrance to breadcrumb. Any help is greatly appreciated.

    Hello

    Try:

    1. create an HTML region in "Position of the region of Page Template 1" and assign the column 2
    2. in the 'attributes of table cells region HTML' setting, set: align = right
    3 - Put your selection list in the new region and the alignment of the label to the right and the Horizontal/Vertical alignment to right

    As long as your bread crumbs in the position of the region, they will be on the left and your selection list will be on the right that the definition of the new region in column 2 divisions the line into two cells and other settings above just to ensure that everything is displayed to the right of the second column.

    Andy

  • suddenly, Firefox 19 falls down and will not open in safe mode. Boots normally after UNchecking "use hardware acceleration when available", what caused this?

    I can't understand what may have caused this and how / if it will be on my system by disabling "hardware acceleration". any ideas?

    OK, uninstall the update of windows KB2670838 solve the problem.

    to do [in win7 anyway] just open windows update, click "View update history" click on "installed updates" scroll down to the section called "microsoft windows" and seek the KB2670838 update, right click and select uninstall.
    system reboot and everything will be fine w / the new universe.

    Thanks for the help everyone. This problem has been resolved.

  • When I opened my favorites fall down and he is bigger than the window of Firefox and I click on a bookmark bookmark fall down closes, but remains a ghost image

    When I opened my favorites drop down and he is bigger than the window of Firefox, and I click on a bookmark bookmark dropdown closes, but a ghost of the part of the bookmark image that is outside the window of firefox on the office remains, by pressing F5 to refresh the screen it will erase, but shouldn't have to do that. Using the latest version of Firefox (15)

    Try disabling hardware acceleration in Firefox.

  • When I go to delete a bookmark - I click the menu drop down and the page that I just removed is still there. What I am doing wrong.

    I click the menu drop down and highlight and open the web page and then I click on the yellow star and choose the tab delete press done and when I close and click the menu drop-down new my web page is still there that I wanted to delete.

    Click right a bookmark in the menu dropdown bookmarks and select Remove to remove the bookmark.

  • Try to scroll to see the folder of photos. I scroll down and the scroll bar jump upward.

    I want to display an image file.  When I scroll down and drop the scroll bar of the jumps back to the top.  I can't access all files below a few albums.  Until I have a chance to click on the folder to open it, the bar rises to the top.

    Hello CathiVanderhave,

    Please provide the make and model of your PC. In addition, please relay if the problem occurs when you try to view other files. You also try to perform a clean boot to verify if a background program may interfere. To do this, please see the link below:

    http://support.Microsoft.com/kb/929135

    Thank you

  • CSS Drop down menu; How to align the edge right of the menu drop down and the parent menu?

    Hi all

    I have a drop down menu that works well.

    The only change that I need to do is to have the right edge of the drop-down menu below to align with the right edge of the parent menu. When you hover over the menu, it currently "injects" down and to the right, with the left edges aligned.

    I want the menu to 'drop' down and to the left, so the straight edges are aligned.

    I tried fiddling with floats and absolute/relative positioning. I don't know what needs to be changed.

    You can provide any assistance is greatly appreciated! I learn through 'cut and paste', please go easy on any terminology you can use.

    Thank you!

    Here is my code:

    .chromestyle{
         width: 100%;
         font-weight: bold;
         float: left;
         height: 29px;
    }

    .chromestyle:after{ /*Add margin between menu and rest of content in Firefox*/
    content: ".";
    display: block;
    height: 0;
    clear: both;
    visibility: hidden;
    }

    .chromestyle ul{
    border: 0px solid #BBB;
    width: 100%;
    background: url(chromebg.gif) center center repeat-x; /*THEME CHANGE HERE*/
    padding: 4px 0;
    margin: 0;
    text-align: right; /*set value to "left", "center", or "right"*/
    }

    .chromestyle ul li{
    display: inline;
    }

    .chromestyle ul li a{
    color: #000000;
    padding: 4px 7px;
    margin: 0;
    text-decoration: none;
    border-left: 1px solid #DADADA;
    }

    .chromestyle ul li a:hover, .chromestyle ul li a.selected{ /*script dynamically adds a class of "selected" to the current active menu item*/
    background: url(chromebg-over.gif) center center repeat-x; /*THEME CHANGE HERE*/
    }

    /* ######### Style for Drop Down Menu ######### */

    .dropmenudiv{
    position:absolute;
    top: 0;
    border: 1px solid #BBB; /*THEME CHANGE HERE*/
    border-bottom-width: 0;
    font:normal 12px Verdana;
    line-height:18px;
    z-index:100;
    background-color: white;
    width: 200px;
    visibility: hidden;
    }


    .dropmenudiv a{
    width: auto;
    display: block;
    text-indent: 3px;
    border-bottom: 1px solid #BBB; /*THEME CHANGE HERE*/
    padding: 2px 5px;
    text-decoration: none;
    font-weight: bold;
    color: black;
    }

    * html .dropmenudiv a{ /*IE only hack*/
    width: 100%;
    }

    .dropmenudiv a:hover{ /*THEME CHANGE HERE*/
    background-color: #0000ff;
    color: #fff200;
    }

    How about this?

    http://ALT-Web.com/demos/right-aligned-CSS2-Horiz-drop-menu.shtml

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    http://ALT-Web.com/
    http://Twitter.com/ALTWEB

  • Black window bugs and crashes and falls down, and WHAT's the PROBLEM?

    First of all, I thought the problem was that my employer still uses Windows XP, with layers of custom on top security. But it happens at home, on my netbook XP vanilla.

    So I thought that the problem was of XP, which is, after all, obsolete. But now it happens on my brand new laptop weeks running 64-bit Windows 7 Professional.

    Here are the problems:
    (1) for the recovery of the standby mode or when I plug it on a second monitor, or even just to have the display closed briefly, Firefox fails to redraw the contents of the window. I just get a black window empty until I have resize or force a refresh. NO OTHER PROGRAM I USE HAS THIS PROBLEM.

    (2) Firefox sometimes do not redraw little matter what I do. I just had a completely black window, and when I clicked on the close box, a msgbox jumped up, completely black inside, with a title like: "are you sure you want to close? I could not see even the 'yes' and 'No' buttons, and clicking on where they are usually did not work. I ended up closing by pressing the Enter key.

    (3) sometimes these problems are accompanied by a small vestigial micro-fenetre, which has no content, no close button and no control resizing. Is this nothing window with no title, but the title bar is long enough for characters may 20. The last time this happened to me, nothing window had a cursor flashing text inside, but typing had no effect. The only way to get rid of the micro-fenetre is to close every single instance of Firefox and wait about 20 seconds. Then it disappears on its own. Sometimes it appears on its own without the black screen problem.

    (4) all my favicons disappear when I updated Firefox on my work XP computer, and they refuse to come back, even when I revisit Web sites.

    Computers involved are:
    Reference Dell E4200 running Win XP Pro
    NetBook Acer One Win XP family
    Vostro 3350 running Windows 7 Pro

    All 3 computers running Norton Security Suite (The E4200 runs a care company, the other two are conducted in free version of Comcast)
    And all 3 computers were connected to a video Displaylink adapter USB (for a 3rd screen) at one time or another, which means that the driver is loaded on all computers, but these problems occur without any external monitor connected at all.
    Everything else is pretty vanilla.

    I get these questions every other day or two and it is really starting to annoy me and make me worried that Firefox is unstable, with me afraid that no matter what unsaved work or even data from my hard drive may be at risk.

    Try turning off hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • Satellite X 200 SLI falls down when the HDMI cable is connected

    Hello world

    I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

    I did not almost any update, but still, this shouldn't happen on arrival!
    Clues?

    Many thanks for any help on this!

    Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

    Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

    However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

    But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
    Did you use the right cable?

    As you can see an investigation is necessary to locate the cause of the error.

    If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

    Good luck

  • Windows 8 falls down and reboots with error of guard dog.

    Same story, I bought a new laptop, everything works fine, but this error occurs frequently. Sometimes it just freezes and does not load even the BSOD. I looked on the internet, so I guess I need to download the minidump files. They are here.

    http://sdrv.Ms/1dgCZBT
    Help me, please?

    Hi Varun,

    Thanks for providing the dump files. There are several reasons why you have BSOD on the computer. Mainly due to the / / HAL.dll, ntoskrnl and file apfiltr.sys.

    First of all, I wish that you update all drivers installed on the computer. Mainly the chipset drivers, then drivers touchpad. Visit the computer manufacturer website and download the drivers and save it to the desktop.

    -Once the drivers are saved on the desktop, press the Windows key + X , then Device Manager.

    -Explore the mouse and pointing device, right click on the touchpad driver and click Uninstall.

    -In the charms of the Search , type uninstall a program. Locate the touchpad (Alps touchpad driver) software and uninstall.

    -Restart the computer and install the drivers from the Chipset, then drivers touchpad.

    You can perform the SFC scan on the computer to resolve the error HAL.dll.

    -On the charms of the search, type command prompt, right-click on command prompt and select run as administrator.

    -Type sfc/scannow and press ENTER.

    -Restart the computer.

    Also perform Check Disk to check if there are bad sectors on the hard disk.

    -In the command prompt, type chkdsk /f and press to enter.

    -Press Y, and then restart the computer so that the disc check occurs at the next reboot.

    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Hope this information is useful. If you have any questions, please let us know.

Maybe you are looking for

  • How to change the language of the OS?

    I inherited a portable grand from my mother, but the windows OS is in french, but not the bios of the computer etc. anyone know how to transfer the OS in English? reload didn't work...any help welcome!

  • Milestone text-to-speech does not?

    Hello I in Egyp, t when the text-to-speech settings menu, the voice data install is dimmed, I tried several times looking for google voice data on the market to install it but it did not. No idea of the experts. Kind regards Khaled

  • Will not be closed, it will restart

    A year ago, I installed a NVIDIA GeForce 8400 GS video card and a wireless mouse Logitech setpoint for the mouse software. Since when I try to shut down the computer, it will just restart. I have to hold the power button as he begins to reboot in ord

  • There are several visual c installed on my computer programs are all nessasary?

    original title: many program There are several visual c installed on my computer programs are all nessasary. I am running window vista

  • webcam VX-800 photo is tinted green. has no parameters property

    I recently replaced my old vx-1000 with the vx-800, in the hope of having a better webcam. Unfortunately, at the time of purchase, I met many problems. 1. the image is tinted green, and I can't find the video settings or properties to change that. 2.