VBAI: Problem of coordinate reference system

In a stage of my VB AI application, I'm set a mark at the center of a circular object correctly.  In the next step, I do a 'find circular edge', including the "Reposition region of interest" value to a coordinate system.

However, when the object is moving, and the coordinate system with it, find a circular RIM does not follow this coordinate system, but rather remains fixed in space.

What should I do to have find a circular rim move with the coordinate system?

Make sure that when you set up the step of the coordinate system, you put up-to-date in the X direction and Y. By default it puts just updated in the X direction, and even if the overlay appears updated in both directions, this can be misleading. If this isn't the problem, you can include a simple inspection with some images to illustrate how you got in this State.

Thank you

Brad

Tags: NI Hardware

Similar Questions

  • Angle between two independent lines of the universal coordinate reference system

    I have 4 different routed as on the attachment. The points of the black lines are from edge detection.  Two lines (black) intersect at a point (red). Green is the bisector. In all cases the angle between lines should be 45 degrees. .. At the present time in some cases, I get to + 45 degrees, + 135, -135, -45 degrees. Is there a way to get the angle between two lines independent of the coordinate system?
    Or ideas?

    Try this:

  • Satellite C660-223 - system caution: "" problem with cooling detected system "".

    When I carry my Satellite C660-223 somewhere for example wear at home to College in a protective case in my backpack, I sometimes get a window warning flashing upward every 20 seconds or so said system + "warning: a problem with the cooling system has been detected." Please turn the computer off immediately and return it for service. +

    This only happens when I transported somewhere and as a first step, that these warnings system flashed only sometimes upwards after I hauled somewhere, but in the last two years, he started to get pretty much whenever I took the laptop somehwere. When the system warnings blink until the computer doesn't feel a little warmer than normal. no danger of overheating, immediately.

    I didn't fix it because the problem seems to resolve itself the next time that I carried the computer somewhere. It's a very strange problem where the short-term solution was the same as the cause: as in I would take the laptop somewhere, the warning system flash upwards and I learned that take "for a walk" would fix somehow everything which was the 'problem '. I solved the problem in this way too often so he could be a coincidence.

    So for a while it wasn't really a problem because I just didn't take the laptop anywhere. But the warning system has recently start flashing to the top if I wear just the laptop on the floor, and the warning system does not disappear with my method incredibly non-tech-savvy to "go for a walk", which I am sure many here would give something to laugh :).

    The obvious answer is that I need to get the service pronto thing, but I'm in the middle of final exams and the situation of tech in my house means I can't leave the laptop away for service for who knows how long when I really need to study.

    Responses, I'm hoping to get are ideas as to what actually caused this problem and short-term solutions that are a little better informed that my approach "going for a walk".

    I think THAT what is, is that the movement to carry your laptop around in a backpack something within the done cooling system moving out of place causing the evil TI work. I say this because, while writing this thread I was turn the laptop over and over again to get a look at the stickers on the back and the practice that seems to have "solved" the problem of warning system because this window flashes up while he was only a few minutes ago.

    It seems so that all component moved his place before been moved back again by the movement to turn the laptop over and over. And I was not even take him for a walk!

    Any help? Thanks in advance.

    Hello

    This notification may appear for different reasons.
    The alert might appear due to
    (1) cooling system malfunction
    (2) blocked cooling vents or fans
    (3) software question (VAP - added value package or BIOS)

    Malfunction of the cooling system, you should contact the service agents at the difficulty.

    In case of a blocked vent and fans it s enough to clean the parts using a jet of compressed air.
    This allows to get rid of dust inside the cooling module.

    If the vents are not blocked and you still see this message, check the application of the service station for updates on your computer. If any are found, download and install.
    You can try to uninstall or update the Toshiba value added Package. This package contains a few essential tools and utilities that control the cooling system too.
    Also check BIOS update.

    But if you continue to receive this error, your laptop may require repair

  • Satellite A660 - message: WARNING: a problem with the cooling system

    My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

    So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

    He also mentioned that I could use the machine with a cooling pad until then if I wish.

    Any feed back?

    > Yes the fan had stopped working and touchpad area was hot.

    In this case, there is really a hardware problem.
    But I m wondering why he should replace the HARD drive and the motherboard
    Perhaps only the cooling module began at malfunction of course this is just a speculation
    If the technician has checked the material, then they need to know what parts are not OK.
    So don t think you have no choice.

    But the guarantee is valid for all is free

  • Satellite P500-12D - a problem with the cooling system has been detected.

    Hi there everyone,

    I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
    WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

    Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

    TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

    Hello

    Which program gives you this error message about the cooling system?

    Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
    Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    If it doesn't help, contact the nearest service partner.

  • Satellite U500 - problem with the cooling system has been detected

    I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
    Before that, I would like to know if anyone has had this problem and if there is a software solution?
    HIERARCHICAL

    Check HERE to see if anyone else had this problem in the past.

  • Qosmio G10 - a problem with the cooling system

    Hello

    Put on my G10-100 this morning and got the following message:

    "A problem with the cooling system has been detected. "Please turn off immediately and the return of serve.

    My other machine running and connected on toshibas website and found the number of support.

    After which left a message there, the automaton response was "we aim to get back to you within the hour," Needless to say, it's now 6 hours later.

    I can't find whether on the web or in these forums, has anyone encountered this before?

    I'm still in my 1 year warranty, but he soon run out.

    Thank you
    James

    Hello

    This looks like a problem of overheating on your device.
    In this case, you must contact the ASP.
    I don't know if it's a phone number just to post you but please visit this m link:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    You will find a Toshiba service partner who is responsible for your country.
    It should help you to solve this problem

    Good bye

  • Qosmio G20 error message: problem with the cooling system has been detected

    I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

    Error message: Warning: a problem with the cooling system has been detected.

    I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

    When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

    I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

    I would be grateful if someone could give advice if the problem is the fan or something else.

    If the fan is the problem, where I can buy a: i live in the United Kingdom?

    Hello

    I think there might be something wrong with the cooling module and the replacement would be necessary.
    Usually, this should be done by an authorized provider (ASP) in your country.

    Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

    So contact the ASP in your country and ask for later handling.

    By the way; also, you can buy the cooling of the ASP module!

    Good luck

  • Satellite A40 - attention: problem with the cooling system has been detected.

    Hello guys,.

    From time to time, I get the following message is displayed:

    WARNING: a problem with the cooling system has been detected Toshiba
    Please turn off computer immediately and return it for service.

    I have Windows XP on it.
    I opened the cooling fan and clean it. Of course, I found it dirty rally.
    But still, I get this message!
    What should I do?
    I live in Northern Germany.

    Any advice is welcome and thanks in advance.

    Ibrahim

    Hello

    The message says it all!
    In this case you should contact the service provider authorized in your country!

    > I opened the cooling fan and clean it. Of course, I found it dirty rally.
    Eventually, the cooling modules don t like needs and that is why the message again!

    Nothing to my friend... you need help laptop technician

  • Satellite C750-A103 made a lot of noise - problem with the cooling system

    My toshiba machine made a lot of noise... like a plane. And it gives me the message "a problem with your cooling system has been the detection.

    Turn off immediately and come back for the service "."
    What should I do? It has been recently formatted, also?

    + The message was edited: mode number + added

    You did not provide details on your laptop model and system that is installed on the laptop.

    Even his I don't know how old is the laptop, but according to this short message, it looks like there is a problem with the cooling system.

    Probably notebooks cooling fan doesn t work properly and the unit cannot be cooled as it should this can lead to cell damage through an internal temperature longer.

  • Satellite C660D - a problem with the cooling system has been detected

    My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

    I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

    I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

    Please help quickly, this prevents me from working and even other things now.

    Thank you

    Hello

    Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

    But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

  • Error message "A problem with the cooling system" on Satellite A660

    Hi all

    Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

    The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

    The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

    Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

    I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

    Thank you

    In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

    I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
    I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

  • Error message "unable to make changes to parental controls settings. If the problem persists, see your system administrator"when you set parental controls for a user account

    Original title: user account with an effort of parental control

    After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.

    How can I get a standard user account third with parental controls?

    Hello

    Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.

    Create a user account (Windows Vista)

    Screw a damaged profile (Windows Vista)

    Check out the link below to check if the parental control is correctly defined

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports

    Hope this information helps.

  • problem with the base system device

    Hello! I have HP pavilion dv7-2250em, and I have a problem with the base system device. What should I do?

    Hello

    Maybe that's a problem with the card reader driver.  Try to download and install the driver from the link below.

    FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45046.exe

    Once the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

    No operating system

    Hello

    I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

    Would it not possible to obtain another copy of the operating system for that computer?

    All the best

    Dean

    Hello

    These are forums for Vista, so vista information is provided

    Here are the different ways to reinstall Vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    ____________________________________________________________

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    __________________________________________________________

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    ____________________________________________________________

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

Maybe you are looking for

  • judgment of new e-mail drop-down menu

    How to stop these little boxes of new emails coming down on the top right of my macbook air

  • The iPhone could not be synchronized.

    Hello I made the update to ios 9.3.3 but then I wanted to put new music but when you synchronize a message appears saying "L"iphone "XXX" could not be synchronized because the synchronization session has not started. " After doing some research on th

  • Analysis of frequency common time in Signal Express?

    Is it possible to do joint analysis frequency time Signal express?  I don't see in the section "analysis", so I guess that it is a separate tool that should be added, if possible still Signal Express.  Help?

  • Please help swing meter

    Is it possible to create to create a counter that starts at 0 and count to 10, when it hits 10 it matters back to 0 and restart again and again. I need to be able to see the value change in an indicator on the front panel. I worked on it for a few da

  • E-mail problem. This is a tough one!

    OK guys. This is the scoop - I used that is to say without any problem, then all of a sudden, some of my clients bent receive the emails I sent them. Here are the different clients I've ever had problems with before. I would never receive any email o