vCenter Web client: a server error has occurred. [500] SSO error: null

Similar Questions

• Change the name of 'pending of interaction' vcenter Web Client

  Our VM application process has a simple custom web form that triggers a query XML in our environment of VCO, where he sits and waits admins to configure the computer virtual based on requirements.  While he is there, the text is a very non-utile ' ProvisionVM: Site check ' which is workflowName:Step.  He also later stops to an intermediate step which cannot be rolled in the first presentation.

  My question is if it is a good way to define the name displayed in the web client to vCenter to something dynamic in the settings.  What I really want to do, is to do like workflowName:RequestedName:Step, or something on that order.  Basically, I would like to be able to say, on this first page, what has been the past in the name of the virtual machine.  If I click in a few pages, I see that there is in it, but that is a bit complicated and then I may have to browse all other tracks to see the tracks on hold.

  Currently, there is no way. But I agree that having a bit more dynamism in the presentation could be useful in some cases to use, so we can consider it for future versions.

• Problem device vCenter & Web-Client

  Hello

  I deploy new servers with VMware vSphere with VMware vCenter Server Appliance 5.5.

  I have a problem! When I connect to my server vCenter Server with vSphere Client, it shows all, host and the VM.

  But with vSphere Web Client, show only the 2 host and the VM of vCenter device. In addition, this presenter "not responding" but with vSphere Client run without problems

  Could you help me?

  Thank you

  Hello

  I solved the problem by resetting the database. I lost all the configuration but works fine

  Thank you

• vCenter Web Client does not

  I recently (about 4 hours ago) installed the vCenter device on my host and had running.  When I'm with thevCenter via the client, everything goes well and I can manage the server.  The problem is that I can't seem to be able to use the web client.  I have check and the web client runs but when I go to the page I'm greeted by the default Apache screen telling me that Apache is running, but something is not configured right.  I was wondering if anyone else saw cela and if so, how you fix it.

  

  Welcome to the community,

  Try https://192.168.192.22:9443 / vsphere client

  André

• TCS Web access 503 Server error

  Hello

  In fact, we install a TCS server to record a streaming of a SX-20, but when we tried to install the application we have trouble with domain and certificate on the server.

  We solved the field, but the certificate can´t work properly and think it's worth to open the aplication of the Internet explorer, the error when try to open the application is 503 service unavailable

  Anyone know this abut.

  Thank you

  Best regards

  Hey Saul,

  (Start > Administrative Tools > Internet Information services manager > application :) Pools)

  1. the identity of DefaultAppPool must be: "ApplicationPoolIdentity.

  

  2. make sure that you start the DefaultAppPool:

  

  3. then you will need to restart the: World Wide Web Publishing Service (IIS) (start > run > Services.msc)

  

  4 after that, to stop and restart all the Services of the TCS:

  

  This should solve the problem.

• After the upgrade from 5.5 to 6.1 VCenter Web Client vSphere page does not work?

  Dear expert;

  I need your help to solve my problem describe as below: -.

  After Upgrade VCenter from 5.5 to 6.1 the vSphere Client Web page does not work, so I need to solve

  Thank you.

  This problem is solved by using below command

  The '% VMWARE_PYTHON_BIN' list '%VMWARE_CIS_HOME%\VMware Services\lstool\scripts\lstool.py identity' - url http://localhost:7080/lookupservice/sdk - type vcenterserver > c:\psc_services.txt

  '% VMWARE_PYTHON_BIN' Unregister '%VMWARE_CIS_HOME%\VMware Services\lstool\scripts\lstool.py identity' - url http://localhost:7080/lookupservice/sdk - Service_ID id in step 4 - user "[email protected]" - password "XXXXX" - non-cocher-cert

• vCenter Web Client 6.0 U1B - users cannot see VM performance data.

  Our 6.0.0 U1b vCenter server and a Windows Server 2012.

  My problem is, the VM admins have access to their virtual machines, but when they go to look at the tables of performance they get the message...

  "Authorization to perform this operation was denied.

  "You do not privilege" system > read "on the server vcenter-name folder.

  They have the ability to turn their VM and they appear in their list.

  Any ideas?

  Thank you

  It seems that the solution is yet to grant that the world of reading only the vCenter server access...

  VMware KB: Cannot display the advanced performance of VMware vCenter Server 6.0 data tables

  Runt...

  We did not have this problem in the thick Client!

• No showing in the Web Client vCenter Server

  ESXi 5.1.0 1117900

  vCenter Server 5.1.0 1123961

  With help, I solved just a problem connecting to vCenter Web Client with admin@system-domain .  Once successfully connected to vCenter Web Client I found that is show no vCenter Server.  If I connect using Windows authentication a vCenter Server appears in the inventory and I can configure everything without any problems.  However, exploitation forest admin@system-domain shows no vCenter Server and I tried to register using the register - is.bat and still no vCenter Server appears in the inventory.  Someone has seen this before and can offer a solution?

  stmux

  It is design related to this

  VMware vSphere 5.1

• Cannot use Chrome to connect to the web client vcenter after update.

  vCenter Web Client Version 5.1.0 build 1115182

  Customer integration Plugin VMRC version 5.1.0 build 1060398

  Customer support version 5.1.0 build 832030

  Flash Player WIN 11,8,800,94

  Browser Google Chrome Version 29.0.1547.66 m

  After all components of vCenter update I am more able to use Chrome to access vCenter Web Client.  When the connection page opens, I get the following error:

  Connection error: could not connect to vSphere Web Client. Contact your administrator to resolve this problem.

  If I try to connect, I get this error:

  Provided credentials are not valid.

  Everything works fine if I use IE 10.  Someone at - it see this before and knows how to solve?

  Thank you

  Mux

  It is fixed.  I had 'Block third-party cookies' checked.  After unchecking it connected perfectly.

  Mux

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP & Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• Cannot launch vSphere 6.0 Web Client

  I just upgraded our vSphere to 6.0, including ESXi and vCenter.

  Everything is fine, but the web client has little problem.

  On my Windows 7 computer, the web client works very well.

  However, on my Windows Server 2008 R2 platform, I see not to launch the Web Client without any error message... (front with 5.5 it worked fine).

  Operating system: Windows Server 2008 R2 SP1 with IE 11 (Flash is updated to 18.0)

  

  Since VMware Support has not yet vCenter 6.0 category, ask for help here... Thank you in advance!

  Thank you very much!!!

  The problem is solved!

  I found a clue in VMware vSphere 6.0 Release Noteshttps://www.vmware.com/support/vsphere6/doc/vsphere-esxi-vcenter-server-60-release-notes.html#clientissues

  He said: Microsoft patch security is necessary.

  Thank you once again!

  

• NetApp VSC v6.1 UI is missing from the Web Client v6.0u1

  I recently updated my vCenter Server 5.5 to v6.0u1 (2k12r2 for Windows with backend SLQ 2012). With that I installed a fresh instance of Virtual Console storage NetApp v6.1. All was working perfectly until I've restarted the vCenter after about 2 weeks of operation of the new version. After you restart the gui NetApp VSC and features were missing completely on the web client. The plugin has always shown as active in the webclient service is, however, no GUI. Strangely when I try to disable the plugin from the web client, it refreshes and remains only set as active.

  In heavy client, the icon was always present, however with the new version (6.1), no functionality can be achieved through this and you are just re-directed toward the Web Client of VMware. Backups were still underway at the scheduled time, even if the plugin was not visible in the Web Client.

  I tried the following:

  The re-registration plugin

  -Stop webclient VC services, stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data). Mainly located in the folder of vSphere-Client-serenity

  -Departure VC web customer service

  -Re-enrollment VSC with VC

  All the re - install

  -Stop services of VC

  -Stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data)

  -Stop services VSC

  -Do a complete uninstall

  -Remove the VSC installation directory

  -Reboot server VSC to delete reg keys

  -Install the new copy of VSC 6.1

  Re-record with the VC Server

  The same question is observed. The plugin shows as being installed. The extension "com.netapp.nvpf.weblient" exists in the breast of the https://< vCenter > / mob. (see attached screenshot). The thick client still shows the plugin as permitted, as the web client. I still cannot see the interface user via the web client despite the plugin is installed and activated.

  Tear out my hair with it. Any help would be greatly appreciated.

  

  Guys,

  An update on this issue, it could be useful to resolve any other issues similar and research...

  After 4months our case eventually made its way to the development of the web client team in VMware. The problem has been identified as a corrupted file in vCenter which is responsible for organizing the status "enabled/disabled' plugins customer web. Difficulty as follows:

  "C:\ProgramData\VMware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity\ALL\client.package.states.

  The solution was: -.

  • Delete the file
  • Open customer vcentre, administration, plugins
  • Disable a random plugin (this forces the State file recreate)
  • Exit vcentre and then reopen
  • Plugins should now be visible
  • Customer goto plugins and re - turn that which has been previously disabled

  Good luck guys, it was a serious pain in the ass

• vSAN health Plugin breaks Web Client

  I installed the Plugin health vSAN, and when I went to the web client to complete the host install; I was able to navigate the environment, but the middle part is... empty.  I uninstalled the plugin and web client works normally.  Has anyone else seen elsewhere?  I intend to open tomorrow a SR.  Thank you, Zach.

  I don't know if these help or not, but maybe you can check whether they make a difference.

  1. ensure that the user who installs the plugin from control of health has privileges to vCenter

  2. ensure that the installation is "run as Administrator". You may need to open a cmd with "run as Administrator" command prompt, then run the msi file.

• «Server error [2009]: failure of resource allocation to results «error IR»» data

  Hello

  We recently moved form 9.3.3. to 11.1.2.3 and we run only IR and QAS reports. When we run a few IR reports we get the below error.

  «Script (x): eception exception: Server error [2009]: failure of allocation of resources for outcome data.»

  Any thoughts on what could be the cause. I changed the DSA definition, HTTP settings for timeouts. I followed an oracle knowledge base document to make sure that I put the correct settings, it still does not.

  Any advice will be appreciated.

  Thank you.

  Hello

  Can you please try to increase the parameters of time-out for the workspace and check the issue.

  You can refer the KM article for more information:

  Hyperion Interactive Reporting (IR) during treatment a BQY in the Web Client and iHTML error: "Server Error [2009] Failed To Allocate resources to outcomes data" [1089121.1 ID]

  Try in 11.1.2.x check these settings in the workspace:

  -----------------------------------------------------------------------------

  Please go to navigate-> administer-> Reporting and analysis-> Web Applications-> right click on RA_FRAMEWORK_LWA and select Properties. A
  Window opens. In this, go to the Applications tab and then go to data access Servlet. There are two values it
  (i) Hyperion Intelligence Client to mark Time (seconds) => to zero
  (II) time of response DAS => set this to 3600
  Restart the R & A and WebApp services after this change.

  Hope this information helps.

  Kind regards

  Harish.

• "Convert a model" in the web client

  In vSphere client one of the default options for a VMguest is to "convert a model."

  I use it a lot, I have a couple of models, after a few weeks/months I convert a VM + updated everything what is necessary + convert model.

  The conversions back are almost instantaneous.

  With the web client, I can convert an existing model to become a virtual machine, but I can't find the option "convert to a model.

  This means that if I want to update a model, I find myself with a long process of "clone model" and plus my original CD VM is left behind, requires me to remove it to clean the models folder.

  If this option is not added, or have I missed something obvious?

  If indeed, it is not available, does anyone know why it's been left in the first place?

  Thanks in advance,

  Mark

  The option convert to model in the vCenter Web Client should be available in the "All actions of vCenter" section as shown in the attached picture. (This is the Web Client 5.1).