VDDK, Windows 7 and 2008 R2 installation problem or volumes

Similar Questions

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use Windows 7 and after the installation of the browser Firefox, error run as admin

  I have my using window 7 and install firefox browser but error run as admisreator...

  Hello

  1. do you get error message during the installation of Firefox?

  2 are you having the same problem with another facility as well?

  3. have you made changes on the computer before this problem?

  If you experience the problem with the installation of Firefox, you can try these methods and check the status of the issue.

  Method 1:

  I suggest to keep the computer in a clean boot and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

  Method 3:

  Disable user account control and check the status of the issue.

  Turn user account control on or off.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

• My computer automatically installed IE 10. I have windows 7 and there is a problem with printing

  When I try to print a Web page, I get a script error telling me that I can't print.  I have windows 7 and it works fine with IE 8.

  Hi Colleen,

  Thank you for keeping us posted.

  Please answer the question-

  What exactly happens when you use adobe?

  What is the exact error when you try to print?

  I would have you look at the article-

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help

  See also-

  http://support.Microsoft.com/kb/308260

  Applies to Internet Explorer 10.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• install a video Magnifier mousecam. The installation disk is for windows XP. My PC runs windows 7 and not recognize installation

  I am trying to install a mousecam video Magnifier. The installation disk is for windows XP. My PC runs on windows 7 and will not recognize the .we installation. How can I get windows 7 to recognize the disc

  You can not force the incompatible software to install or work, to visit that manufacturers of equipment/program support site and checks if there is a version compatible win7

• Windows 8 and Franklin U600 driver problems

  Hello

  I have a modem USB U600 at Virgin Mobile, the USB modem drivers are not compatible with Windows 8.

  When you look at Device Manager I find there something in the sense of 'Error 37, impossible to initialize the drivers'.

  Is there no workaround possible to get this thing works with Windows 8?

  I spoke to the Virgin people and believe it or not the only thing to do is to return the USB modem where we bought it (the same thing happened to me). The USB modem is not compatible with Windows 8, and nothing else can be done. I find it incredible, but there you have it... They claim they have other solutions that work with Windows 8, but it remains to be seen.

• Windows Vista Service Pack 2 installation problem

  I am having major problems installing service pack 2 on windows Vista on a Dell Inspiron from 32-bit. It returns the 8007000D error code.

  I tried the PC back to factory settings, removing the anti-virus and the deactivation of some things non-nessasary start up with msconfig. Also, I have disabled all the wireless devices using a switch on the side of the laptop - it seems that would enable me to install service pack 1.

  Even with all the foregoing it always fails and recommends the system "Update system tool" update running. I have run, restart the computer and run the SP2 and it does not always work with the same error message.

  The only other methods recommended to install must remove antiviris and other programs that I've done so I don't know what to do!

  Help, please!

  Thank you

  Matthew

  Robear,

  Thanks for your reply.

  I looked at the link (http://support.microsoft.com/kb/947366) and went through all the troubleshooting guide without success. With my current attempts to install SP2 (after the return to factory settings), I remove McAfee from the computer (that came with it as default) and then install the service pack SP1 and SP2 by using the stand-alone installation programs by downloading from another computer.

  Thank you for give me the Microsoft technical support link, that I had read on another thread that the free support is exhausted.

  I will try to sue microsoft and come back here if I have any luck!

  Thank you

  Matthew

• Windows update KB 2686509 security installation problem (error code is 0X8007F0F4)

  original title: I'm having a problem installing to a KB 2686509 windows security update.  The update downloads but continues to do not settle.  The error code is 0X8007F0F4.  What can I do to solve to partition?

  This installation has "failed" to install several times.  I keep getting the security shield on the toolbar.

  Hello

  I suggest you follow the steps listed in this article and check if this may help.

  http://support.Microsoft.com/kb/958051

• Agilent 4156 new driver plug-and-play (pulse-installation problem)

  Hello, I am new to Labview and just started using the Agilent 4156 new plug-and-play driver published on 02/12/2008. I try first to set up conditions of STRESS using this project. While I am able to configure most of the things that I need, I can't set the peak pulse value using the program "Set Pulse.vi". The Readme for the driver mentioned that this program has not been tested. The error message is the following:

  Reports of the instrument:
  + 181, "illegal installation. Invalid command. »
  -113, "undefined header."
  + 0, "no error".

  Can someone help me with this problem?

  Thank you.

  Thanks for your reply.

  I think I solved the problem. There are syntax errors in the "set up" Pulse.vi (PUL has been used instead of PULS in two places). He is now able to set the basic and advanced.

  In addition, the way is designed the vi, it will always give an error because he tries to put in tension (possible only when a VIEW is of type V) 'Source' and 'Base' / 'Peak' tensions (only possible when the PGU is a type VPULSE). I removed the parts that I didn't need.

  FYI, I use an Agilent 4156 C. In the configuration screen, the revision of the CPU is 1 and the revision of the software (03.06 HOSTC, CUMS 04.07, ADC 01.00).

• Satellite C660 - M21G SM bus controller and display driver installation problem

  Hello

  I recently bought toshiba Satellite C660 laptop M21G with windows 7 32 bit installed (not not licensed) and I installed all the hardware drivers except the SM Bus controller and driver of Nvidia GeForce graphics card, this because it will not terminate on the web site of toshiba, or other medium there but when I try to install the Chipset utility or the display driver (driver VGA) an error message appears in the two installation indicates that I have not matched the software requirments of minimum requirements for the installation of the display adapter and chipset.

  I don't know why these requirments does not include in the error message?

  I have more than 12 hours, trying to find a way to install the display driver, because the standard VGA driver that installed windows 7 (32-bit) is very poor and I can't run any games or smooth video game
  I'm hurt and I need help

  Best regards

  To my knowledge, the Satellite C660-M21G belongs to the series of PSC1SE.
  I m wondering where did you get the right driver for this series display
  The laptop seems to bear the NVIDIA GeForce 315 M card

  I checked the page European Toshiba and not all driver Win 7 32 bit drivers are available on the European driver page I think you tried to install the wrong graphics driver or is not compatible and that's why this error message during the installation of the drivers.

  But it seems that Win 7 64-bit driver is available for this series, that's why I recommend you to test the driver for Win 7 64 bit.
  In this case, you need to install the Realtek card reader controller driver SM bus controller can be the card reader There is also a version of driver Win 7 64 bit on the European driver page

  Simply test the

• Satellite L300-1AQ - password utility and the Firmware installation problem

  Hello

  I recently reinstalled Vista after the first crash, then installation of linux.
  Now I installed most of the services Toshiba back packages on my laptop Sat L300-1AQ but firmware and password utilities are not installing back.

  Watch firmware available target error message is not available.
  Utility password displays the serial number is not correct.
  do not understand why these error messages come and how I can deal with that.

  Thank you

  Year s

  Hello

  Firmware update should only be done if you notice problems with the ODD (CD/DVD drive)
  In addition the laptop was equipped with various drives and firmware on the Toshiba page seems to be designed only for some some sides.
  So if the laptop uses other ODD then the update of the firmware would not be supported.
  See more information on the driver page for some details on the update firmware and what are the chances are supported!

  I m not very well why the t supervisor password utility could not be installed, but I think that the message: bad series appears that if you tried to install a tool that was not designed for this model of laptop or the operating system.

  The L300-1AQ seems to belong to the series PSLB8E and you must ensure that you have chosen the right model on the driver page.

  PS: don't forget that the VAP has been installed everything first!

• Partition Windows 10 2013 MacPro (BootCamp) Installation problem

  Greetings,

  I had some difficulties to install Windows via Boot Camp 10. As far as my system goes, please see the attached screenshot of my MacPro system. My SSD hard drive is.

  The dam is located after the "Format", when I click on the next button, I got this error:

  "We could not create a new partition or locate an existing one. For more information, see the Setup log file"(see the image attached).

  I've been Googling since yesterday and trying to apply solutions out there my problems without success (a part of it because I am not a computer savvy and do not know if their problems are the same as mine), but here are some things I've tried:

  01 unplug the stroke, including the external enclosure which houses 4 external drive and my computer screen.

  02 reset the SMC

  03 reset NVRAM

  Any help and guidance on where should I go to solve this mystery is greatly appreciated!

  

  

  Oh just Add a more, only a few things related to my MacPro are:

  -USB Flash drive (I install via USB (Windows Single iso Language has been downloaded from Microsoft))

  -Apple USB keyboard

  -Logitech mouse receiver.

  At one point only I used a keyboard, always without success.

  Thank you

• Last update of Windows XP and SVCHOST. EXE problems?

  Hello. My PC runs XP SP3 (HP Media Center) 3G of ram. It worked very well lately without any problem whatsoever. This morning I started as usual. I noticed the familiar Microsoft Update 'yellow shield' in the lower right of the task bar. I flew over the mouse over it and it read "download updates 0%. He never got above zero (or I couldn't open Update window). I pulled up the Manager tasks and SVCHOST. EXE has been hogging 99% of my CPU. I have everything closed and stopped and restarted. After the reboot (thinking it was a problem of Windows Update), I went on the Microsoft Windows Update site and clicked on 'Express' updates to try to update manually. He began cycling (search?) updates and soon SVCHOST. EXE, roared back to life and pegged the CPU at 99% of use (effectively maxing out the CPU at 100%). Page Update MS has never reached the point where it stated that I needed updates... He kept just cycling and research. Once the SVCHOST. EXE is happening (I tried this update 3 - 4 times today) it does not stop (if I close the window of Windows Update or not). I need to stop and restart. When I stopped, I see a prompt "end program" for RUNDLL. EXE that (when I try to 'end') translates into a prompt "unresponsive". I have to leave the program to close. As a precaution I've scanned with MSE, Malwarebytes, Spybot and SuperAntiSpyware and all were clean. No problem with MS Security Center is. I never saw my computer behaves like this before. At the time of this post, it seems fine except when I try to update on the Microsoft Site. Is there a bug or a problem with the last update?  Any thoughts appreciated. Thank you.

  Install KB2846071 for IE version 6: http://www.microsoft.com/en-us/download/details.aspx?id=39519
  Or update IE 8 version: http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx

  New info: the best way is to KB2870699.  He has the problem with high CPU.
  http://TechNet.Microsoft.com/en-us/security/bulletin/MS13-069

• Windows 8 HP LJ2030 Driver installation problem

  I have a HP Laserjet P2035 printer and a brand new Windows 8 computer.  The printer was purchased several years ago and has been used with a Windows XP box. When I joined the printer to the new computer via a port USB<->USB cable, it was not recognized. Manually, I downloaded the driver on the HP website and tried to install it several times without success. I finally found the log associated with the installation procedure.  The following are entered during my last attempt to install the driver by clicking on the app "ljP2035-gdi-pnp-win64 - in .exe:

  [11/08/2013 13:51:35:112] - LOG (1110): PRODUCTInst -.
  [11/08/2013 13:51:35:112] - LOG (1110): InitProperties - retrieve the accessories of the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\properties.ini".
  [11/08/2013 13:51:35:112] - LOG (1110): the Installer version: 1.0.5.3
  [11/08/2013 13:51:35:127] - LOG (1110): - Language ID -
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI by default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI system default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): user language = 1033 default ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): language = 1033 default system ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): ID of the language to use = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): Is64BitWindows()
  [11/08/2013 13:51:35:127] - LOG (1110): compiled as app 64 bit so must be on 64-bit Windows.
  [11/08/2013 13:51:35:143] - LOG (1110): operating system is 64-bit
  [11/08/2013 13:51:35:143] - LOG (1110): cmdline "PRODUCTIVE."
  [11/08/2013 13:51:35:143] - LOG (1110):--/-/ \-proprietes-/------------------/.
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_INFNAME = HP2030. INF
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_VERNAME = HP2030SU. WORM
  [11/08/2013 13:51:35:143] - LOG (1110): SHORT_PRINTER_NAME = HP LaserJet P203
  [11/08/2013 13:51:35:143] - LOG (1110): PRINTER_SERIES_NAME = HP LaserJet P2030 series
  [11/08/2013 13:51:35:143] - LOG (1110): PRODUCT_VIDPID = vid_03f0 & pid_5d17
  [11/08/2013 13:51:35:158] - LOG (1110): REG_INSTALLKEY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110): ISRUNNING_MUTEX_NAME = HP2030Installexists
  [11/08/2013 13:51:35:158] - LOG (1110): INSTALL_DIRECTORY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110) :-/-/-/--properties-------------/------.
  [11/08/2013 13:51:35:158] - LOG (1110): PRODUCT installation program.
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer()
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() = 0 step
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() step = 1
  [11/08/2013 13:51:35:158] - LOG (1110): - InitializeStep -
  [11/08/2013 13:51:35:174] - LOG (1110): GetLandDir - English
  [11/08/2013 13:51:35:174] - LOG (1110): printer inf: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\HP2030. INF
  [11/08/2013 13:51:35:174] - LOG (1110): file printer verion: C:\Users\ZekeAppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:35:174] - LOG (1110): name of the printer series: series HP LaserJet P2030
  [11/08/2013 13:51:35:174] - LOG (1110): GetPrinternamesFromINF()
  [11/08/2013 13:51:35:205] - LOG (1110): InstallSequencer() step = 3
  [11/08/2013 13:51:35:205] - LOG (1110): - LicenseStep -
  [11/08/2013 13:51:35:205] - LOG (1110): license file: "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:221] - LOG (1110): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog
  [11/08/2013 13:51:35:237] - LOG (1110): chaines(): stringsDllPath: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\strings.dll
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog - text to load the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:237] - LOG (1110): text is clear
  [11/08/2013 13:51:39:141] - LOG (1110):-[IDLCGenericTextDlg 1 BUTTON pressed].
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() g_progressDlgRunning = 0
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() from dialog progress thread...
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:nInitDialog()
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:oDataExchange
  [11/08/2013 13:51:39:156] - LOG(13A4): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:39:656] - LOG (1110): InstallSequencer() = 4 step
  [11/08/2013 13:51:39:656] - LOG (1110): - PreInstallStep -
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (List)
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (HP LaserJet P2035)
  [11/08/2013 13:51:39:656] - LOG (1110): FindInstalledDrivers()
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft XPS Document Writer v4
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft shared fax driver
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = drive compatibility point and print more Microsoft
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = HP LaserJet P2035
  [11/08/2013 13:51:39:688] - LOG (1110): found driver
  [11/08/2013 13:51:39:688] - LOG (1110): PrinterDriver?  HP LaserJet P2035? HP ePrint =
  [11/08/2013 13:51:39:703] - LOG (1110): current verion printer file: C:\windows\system32\spool\DRIVERS\x64\3\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): file Web bundle printer verion: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): ===>>> (gle = 2, 0 x 2) ERROR: Msg: the system cannot find the specified file.

  Context: Could not open the file of version ' C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM '
  [11/08/2013 13:51:39:703] - LOG (1110): Web bundle is older than the current 20120627 (3.0.1.52444)
  [11/08/2013 13:51:39:703] - LOG (1110): driver currently installed, but newer than the web package.  NEED NOT UPDATE!
  [11/08/2013 13:51:39:703] - LOG (1110): InstallSequencer() step = 7
  [11/08/2013 13:51:39:703] - LOG (1110): TerminateProgressThrd (0x44a110)
  [11/08/2013 13:51:39:719] - LOG (1110): _PostProgressMessage hWnd = 0x1402c2 msg = 1124, param = 0
  [11/08/2013 13:51:39:719] - LOG(13A4): IDLCProgressDlg:nTerminate()
  [11/08/2013 13:51:40:235] - LOG (1110): - FinishStep -

  The log entry indicates the driver already installed but the Windows Device Manager seems not to think (see attached image). By clicking on 'Properties', then on 'Events', I saw the following message (see second image). I have no idea what this error code means. Can anyone provide some ideas of what I can do next? I hate the idea of making a new printer, if there is a software solution. The printer still works fine.  For what it's worth, through the Windows Device Manager, I uninstalled the printer and driver once already in order to get a clean installation of the driver.

  Thanks for any help,

  Zeke

  Fixed. "Follow-up"clean boot"as described here: 'http://support.microsoft.com/kb/929135 ' Windows recognize it now and I can use my printer.".