VDI connect to the virtual computer with multiple NICs, use wrong address

Similar Questions

• can I use my wireless printer if it is connected to the main computer with the USB cable?

  My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.

  My question: can I use the printer to the host computer by USB and computer laptop through wireless?  If yes how to configure connections? Thank you.

  Hello

  A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.

  Kind regards

• Connection to the virtual computer

  I disabled the connection to the local network through RDP.

  But I am able to connect through console of the vsphere client.

  How does this work?

  If you disable Network Interface at the level of the comments on a virtual machine or remove completely the vNIC to the VM, it would not affect vSphere Client to allow you to open the Console of the virtual machine.

  examine the console of the virtual machine as if the standard output device connected to your virtual machine. ESXi host running MKS (mouse, keyboard and screen) process for each powered on VM, so opening the virtual machine console is managed by the OS ESXi itself. It has nothing to do with the connection of the virtual machine.

• Through host SCSI tape drive to the virtual computer with the backup software installed in the comments

  Can I attach an external SCSI tape drive to one of my hosts, and then add it as a device in a virtual machine.

  I want to use backup exec on a virtual machine, rather than having to have a separate physical server to attach the tape drive. I realize that I wouln't be able to vmotion the guest but as its only going to be a backup machine I am happy with that.

  Thanks in advance,

  Yes is possible.

  I have a Dell TL2000 with a dedicated SAS card and it works (not faster than in a real environment, but works).

  You add the SCSI ID of the tape (and the library, if any) to the virtual machine.

  Or, if your hardware can he take charge, using VMDirectPath and give the card on the virtual computer.

  André

• Lose connectivity to the virtual computer on your laptop when you are disconnected from the network

  Hello

  I have a laptop with a Windows 2003 virtual machine (VPC 2007) with IIS 6.0, hosting a Web site for testing and development.

  Using Dreamweaver and navigation on the site of the XP laptop (VM host) works very well when the network cable is connected.

  Interestingly, this will work, but VERY slowly when plugged into an empty network switch.

  The virtual machine has the laptop computer adapter selected to work. I tried to use a loopback cable and it did not work. I also tried to add the MS Loopback Adapter but not had any luck with that when you set the virtual to use.

  Please can I have some suggestions, laptop user wants to work on this site with the virtual machine when you are away a network connection.

  Thank you

  Tom

  Hello

  Try a static IP on the same subnet to re-branded to map of loop back on the virtual machine and the host.

  Make sure that the subnet is allowed through the firewall.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Photosmart 6510 connect to the new computer with Windows 8

  I have a photosmart 6510 e - all in one printer series.  I just bought a new computer with Windows 8.  When I tried to connect my printer, an error message came up saying that I have to upgrade to Vista or Windows 7.  He does not Windows 8.  Is there a solution?

  Hello

  Download and install the latest version of the software Windows 8 below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108880-3&cc=us&DLC=en&LC=en&OS=4131&product=5058336&sw_lang=

  Shlomi

• No network connection to the virtual computer after migration manually to the new host

  We have added six new hosts to our environment, and I was tasked to test connections of VIRTUAL LAN on each of them before we move VM production of their.  This is probably a simple problem, but I am new to VMWare and need help.  I already talked to our network guys, and he assures me that the physical switches are setup and working properly.  We work a vDS.

  I'm testing 14 VLANs on six new hosts.  All but one are constantly working.  (They all work on the hosts of origin which were in force before.)  I have a static IP configuration on my test VM and MAC is set to automatic.  I checked the MAC does not change when you migrate to other hosts and the VLAN correct is listed in the settings the VM network (it is not empty).  Him VLAN will work on three of the six hosts, but not all at the same time.  The strange thing is that guests at work are constantly changing.  For example, this morning hosts11, 12 and 14 may work, but this afternoon, that could change at hosts12, 14 and 16.  I don't understand why they would change on their own.

  My test consists of VM testing, migration manually, powering back, then he ping from my computer off.  Of course everything works when I get ping responses.  When I get no answers, the test of the virtual machine has a yellow exclamation mark on the network icon in the system tray.

  What should I do to fix this?

  How is the network configured?  You have a different NIC port/cable for each VLAN or Trunking used on the side of the switch?

  If you use circuits on the side of the switch, then your GRPE ports virtual switch a VLAN ID needs to match the vlan is underway to shared resources.  No matter if it's a standard switch or switch distributed... you still need this ID of vlan.

  I've seen the random question that you encounter if missing one or more of of the uplinks on the side of the switch the VLAN.

• Create the virtual computer with a static MAC address

  Hi all

  Im trying to create a virtual machine with PowerCLi but im failing to connect New - VM with an addapter network?

  I know that you can create new network addapter with:

  New-card network -MacAddress 00:50:56:bb:00:13 -Type e1000 -NetworkName ' Vlan 6 Virtual Machine '

  But this will create just a network card on the server im related to the use

  to connect-viserver

  New-VM

  -Name VMSTORE23 -$vmhost $esxhost -data store $datastore DiskMB - 20000 MemoryMB - 2019 -NumCpu 2

  I think that the cdmlet that I need to use is OScustomizationSpec - but like I said im strugling to connect?

  Someone at - it ideas.

  Thanks in advance for your help.

  Eddie

  You're almost there, the MAC address must be specified as a string, enclose it.

  New machine virtual- - name VMSTORE23 - $vmhost $esxhost - $datastore - DiskMB 20000 - MemoryMB 2048 Datastore - NumCpu 2 - NetworkName "Vlan 6 Machine virtual network | Get-NetworkAdapter | Set-NetworkAdapter -Type Vmxnet3 -MacAddress "00:50:56:bb:00:2 b" - confirm: $false

  I added the - confirm the setting, as it will not request the change.

• BitLocker to Go-compatible USB connected to the virtual computer

  Hey all,.

  Someone at - it tried connecting a Bitlocker-to-Go has helped USB device to a virtual machine? On my Windows 7 host, I am running VMware Workstation 7.0.1 and the USB device to a Windows XP SP3 virtual computer. The removable disk appears, but it shows as not being formatted / raw.

  Anyone else having this problem?

  Thank you

  Frank

  Do you need to install a driver for Bitlocker-To-Go in your Windows XP guest?  The only thing I could find for XP only gives read only ability...

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=64851943-78c9-4cd4-8e8d-f551f06f6b3d&displaylang=en

• Oracle UCM CIS - user authentication and connection to the virtual computer

  Hello
  
  I have a few questions. I'm trying to integrate the University Complutense of MADRID with my custom web application.
  
  (1) is it possible to authenticate users (password validation) if we use CIS to integrate. If this isn't the case, then if the server of the University Complutense of MADRID uses its own database backend and not no matter what LDAP for user management, must make us a call to the database table directly? Any idea on the table?
  
  (2) if I am trying to connect to a server of the University Complutense of MADRID that runs on a virtual machine, but in the local network, I always get an error like this.
  Failed to retrieve the configuration information for the content Terminal item. Permission denied. Address < < ip address > > ' is not an authorized remote socket address.
  However, if I connect to an instance of the AAU runs on a server instance, the same code is running.
  The server within the virtual machine console is accessible from my m/c through browser. So should I give access to this port to the socket connection 4444. Couldn't find anything on it. Any help will be appreciated.
  
  Thank you
  In depth.

  Hi deep,

  You can restrict access to the content server port 4444 using a filer of ip address in the /config/config.cfg file of

  There is a property called SocketHostAddressSecurityFilter

  You can for example set
  SocketHostAddressSecurityFilter = 192.168.1. * | 10.102.3.3 | localhost
  the list is led separate

  connections from addresses other than these raise the error that you have demonstrated

  Please consider maring this thread as answered if that solves the problem to help others facing the same

  Tim

  Please consider maring this thread as answered if that solves the problem to help others facing the same

  Published by: Tim Snell on December 15, 2010 07:57

• See the virtual machines with multiple tags in a category

  Good afternoon-

  I'm looking for a way to list all virtual computers that have several tags of a certain category. In my situation, I use VMware tags to control the selection of lists for my backup software. I have a category of tag called tags said 'Monday', 'Tuesday', and "Backup Job" etc. I'm looking for a script that will tell me all the virtual machines that have multiple labels in the category of backup, as the 'Monday' and 'Thursday' tags, for example.

  Thank you!

  Try something like this

  $tagCatName = "save jobs".

  $tagCat = get-TagCategory-name $tagCatName

  Get - VM | where {(Get-TagAssignment-entité $_-catégorie $tagCat).} {Count - gt 1} |

  Select Name,

  @{N = 'Tags'; E = {[string]: join ("," (Get-TagAssignment-entity $_-category $tagCat | % {$_.}))} Tag.Name}))}}

• How to develop the drive to the virtual computer with snapshot

  On workstation 10, I installed the development tools to a snapshot of the virtual machine and ran very low disk space. Can I group or hidden the snapshot on a virtual machine so I can increase the size of the virtual disk of reference?

  Thank you

  Scott

  the vmx file still has the old vmdk - you must change the setting that lists the vmdk file.
  When this is not enough post the vmx file.

  By the way - don't worry about errors you received.
  WS 10 reads in all possible paths for the configuration files and as earlier versions did not complain if we were not present the new version complains.
  I doubt that any default installation can run vdiskmanager without mistakes - if you don't like mistakes: create empty files in each path that has been mentioned

• Way to clone the virtual computer with using VMIC

  Hi all

  Y at - it options CLI to create a clone of a virtual machine without assistance from any infrastructure customer. It will be useful if the clone is a linked clone. I created a clone by copying the VMDK file and then I used VMIC. But, I'm looking for some commands, so this will be helpful when I wanted to create several clones.

  Thank you for your help in advance.

  Vivek Lamar

  That it might be useful:

  http://communities.VMware.com/docs/doc-9020

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Hi ALL, did any attempt on the virtual computer NETWORK load balancing using HYPERV on UCS blades

  I try to configure the CASE server cluster by using the Unicast NLB on the virtual machine on different blades on the UCS, it works for awhile, then he abandoned packages.

  I heard that this screenplay of unicast is not supported in the UCS when she used END-host mode in the fabric interconnet...? any attempted before.

  Would it, I use the multicast mode is that something needs to be done on the FBI62020 or the LAN switch upstream. ??

  Header note I found on the implementation of UCS for mulitcast NLBL:

  Microsoft NLB can be deployed in 3 modes:

  Unicast

  Multicast

  IGMP multicast

  For series B UCS deployments, we have seen that the multicast and IGMP multicast work.

  IGMP multicast mode seems to be the more reliable deployment mode.

  To do this, the monitoring settings:

  All NLB Microsoft value "Multicast IGMP" nodes.  Important!  Check ths by logging into EACH node independently.  Do not rely on the MMC of NLB snap.

  An IGMP applicant must be present on the VLAN of NLB.  If PIM is enabled on the VIRTUAL LAN that is your interrogator.  UCS cannot function as applicant IGMP.  If an interrogator of functioning is not present, NLB IGMP mode will not work.

  You must have a static ARP entry on cheating it upstream pointing IP address Unicast NLB on the multicast MAC address NETWORK load balancing.  This need will set up, of course, on the VLAN of the NLB VIP. The key is that the routing for the NLB VLAN interface must use this ARP entry as a unicast IP ARP response may not contain a multicast mac address. (Violation of the RFC 1812)  Hosts on the NLB VLAN must also use the static entry.  You may have several entries ARP.  IOS can use a function of 'alias' of ARP. (Google it.)

  How Microsoft NLB works. -The truncated for brevity Mac addresses.

  TOPOLOGY OF NLB MS

  NETWORK VLAN 10 = subnet 10.1.1.0/24 IP load balancing

  VIP = 10.1.1.10 NETWORK LOAD BALANCING

  Arp entry static switch advanced IP 10.1.1.10 upstream to MAC 01

  NLB VIP (MAC 01, IP 10.1.1.10)

  NODE-A (AA, MAC IP:10.1.1.88)

  NŒUD-B (MAC BB, IP:10.1.1.99)

  Using the IGMP snooping and interrogator VLAN snooping table is filled with the mac NLB address and groups pointing to the appropriate L2 ports.

  MS NLB nodes will send the responses of IGMP queries.

  This snooping table could take 30 to 60 seconds to complete.

  Host on VLAN 200 (10.200.1.35) sends traffic to NETWORK VIP (10.1.1.10) load balancing

  It goes of course to VLAN 10 interface that uses the static ARP entry to resolve to address MAC 01 VIP NETWORK load balancing.

  Since it is a multicast frame destination it will be forward by the IGMP snooping table.

  The framework will arrive at ALL NLB nodes. (NŒUD-A & NŒUD-B)

  NLB nodes will use its load balancing algorithm to determine which node will manage the TCP session.

  Only one NLB node will respond to this host with TCP ACK to start the session.

  NOTES

  This works in a VMware with N1k, standard vSwtich and vDS environment. Where surveillance IGMP is not enabled, the framing for VIP MAC NETWORK load balancing will be flooded.

  NLB can only work with TCP-based services.

  As stated previously mapping an IP unicast to a multicast mac address is a violation implied by RFC 1812.

  TROUBLESHOOTING

  Make sure your interrogator is working. Just to clarify that this does not mean that it is actually at work.

  Wireshark lets check that IGMP queries are received by the NLB nodes.

  Make sure that the ARP response works as expected.  Once Wireshark again is your friend.

  Look at the paintings IGMP snooping. Validate the L2 ports appearing as expected.

  CSCtx27555 [Bug-preview for CSCtx27555] Unknown multicast with destination outside the range MAC 01:xx: are deleted. (6200 FI fixed in 2.0.2m)

  IGMP mode not affected.

  CSCtx27555    Unknown multicast with destination outside the range MAC 01:xx: are deleted.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx27555

  fixed in 2.0(2m)

  Solution: Change the NLB mode of operation of "Multicast" to "multicast IGMP', which modifies balancing load NETWORK VIP MAC at 0100.5exx.xxx Beach, allows to transfer occur as expected.

  Q: and if I switch to switch mode, which means all of the profile and the settings on the servers are completely exhausted and I need to recreate them. ???

  A:Cisco Unified Computing System Ethernet switching Modes

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns517/ns224/ns944/whitepaper_c11-701962.html

  -There is no impact on the configuration, you have done service profiles.  they will continue to work as expected.  Mode selector has the FI behave more like a conventional switch.  Most notable is that Spanning tree will be activated and if you have several uplinks yew, tree covering weight will begin to block redundant paths.

  You need to review your topology and what impact tree covering weight.  Generally, we at the switch port upstream defined as "edge master", you want to delete this line.

  For pre-production and laboratory environment, PDI can help qualified with the planning, design and implementation partners.  Given to review the IDP site and open a case if you need more detailed assistance.

• OfficeJet 8610: Wireless direct connection of the laptop computer with printer

  Could not establish connection direct wirreless BOF Macbook Air on printer. Have no router.

  Hi @bjbhp,