VDI with ISE access control

Similar Questions

• Problems with "security access control list '.

  Hello
  
  My system is configured as follows
  UCM - 11 GR 1 material - 11.1.1.4.0 (Build: 7.3.0.180)
  -Database 11 GR 2
  OracleTextSearch - engine is used
  RoleEntityACL - component is enabled
  -Parts of my config.cfg

  SearchIndexerEngineName=OracleTextSearch
  IndexerDatabaseProviderName=SystemDatabase
  UseEntitySecurity=true

  I want to create lists of access control for users, groups, and roles. I followed the the next page http://download.oracle.com/docs/cd/E17904_01/ documentatoindoc.1111/e10792/c03_security.htm#CDDBCIDA
  Everything seems to work fine at first, because I'm able to add users, groups, and roles to the ACL of the document. The problem is that adding a user, group or role of the ACL of a document does not affect the rights of a user a of the document.
  
  Example:
  -Wear a read access to "public"-SecurityGroup
  -UserB is to check in a "document1" to the SecurityGroup 'public' and adds UserA to the ACL of "document1" give UserA 'read' and 'write' access to "document1".
  -The result is that UserA doesn't have to 'write' access to "document1", well it is in the ACL (same problem with groups and roles)
  
  In this scenario shouldn't UserA have "write" access "document1" or I have a bad understanding of access control lists?
  
  Thanks in advance
  Brahim

  You heard wrong...

  Permissions through ACL are subject to the same rules of intersection between the permissions granted by the intermediary of roles or accounts.

  If you want write access to a document, you must have at least write access to the security group of the document, account and have RW permissions in the ACL.

  In other words work ACL on top existing accounts/groups and roles that they do not replace the existing UCM permissions. You can restrict the permissions by an ACL but not grant permissions that the user has not already set for the account or the security group.

  And by are the ACL way ugly generally impassable and unmanageable so if you have to use them all to be very careful!

  hope tha helps
  Tim

• simulate the track access control with labview

  Hello

  I want to simulate a track with labview access control.

  This is the procedure:

  vehicle is located in front of a door, antenna check access control, if that's ok the traffic light turns green and the gate of the student.

  I thank very you much for helping me.

  Hi hot wheels,.

  I think it will be useful for you

• Using Windows XP with an access switched. How can I stop the network Dialer to invite the user connect even if I checked never dial a connection in Control Panel, then apply, then OK?

  Using Windows XP with an access switched. How can I prevent the network Dialer to invite the user connect even if I checked: never establish a connection to the Control Panel, then apply, then OK? She comes right back in a few minutes for: always connect by default. Help! Control panel Connections tab doesn't really seem to apply my change to never establish a connection right back to always make the default connection. What else is there to do?

  Hi Richard,

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Network connections and remote access troubleshooting

  Hope the helps of information.

• Big problem with user Microsoft Access control

  Hello

  I have to work around for CCleaner (UAC) user access control that begins after every time Windows starts as an auto start the program.

  Every time you start, I get the UAC prompt which warns me again and again.

  I don't want to disable access to the computer, but only for CCleaner user control.

  Creating a link like this: http://www.petri.co.il/bypass-uac-using-desktop-shortcut.htm there's no option for me, so I found this:

  http://www.microsoft.com/en-us/download/details.aspx?id=7352.

  I followed these instructions: http://www.ghacks.net/2010/07/08/get-rid-of-uac-prompts-with-microsofts-application-compatibility-toolkit/

  but it does not work. I always get the guests.

  What can I do?

  Thank you very much in advance

  George

  It would be impossible because it would create an immediate and global security hole.  For example, let's say you whitelist CCLeaner.  Then all viruses and Trojan horses in the world know immediately they can simply replace the file ccleaner.exe on your computer a copy of the virus and it will be automatically approved and completely take over your computer.

• Guest access with ISE and WLC LWA

  Hi guys,.

  Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

  1. the clients are trying to connect wifi with guest SSID

  2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

  3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

  https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

  )

  4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

  

  5. once the Guest Login Page will appear and you can enter their username and password.

  

  6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

  The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

  

  I know that it happened when you can has no Page of Login of WLC certificate...

  My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

  THX 4 your answer and sorry for my bad English...

  Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

• Access control with custom groups

  I'm rather new to APEX. I'm trying to implement access control/authorization using custom groups (not built-in groups View, Edit and administrator). I search the web and the forums of discussion, in general, but so far I came up empty. I was hoping someone could point me in the right direction on how to start. Is there stored procedures that need to be adapted and implemented? Where should I keep the user groups? Can I use tables integrated or we can develop custom security group tables? These are some of the questions that I tried to be and any help would be appreciated.
  
  And BTW, due to the customer's requirements, we currently use version 3.2. Not sure if there are significant changes between this version and the latest version.
  
  Thanks to you all!
  Mischa

  Custom authentication is easy enough to put up with your own tables, here's an example
  http://djmein.blogspot.com.au/2007/07/custom-authentication-authorisation.html

  This brings to authorization, using your own tables. It must focus on the use of the authorisation schemes
  http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35125/sec_authorization.htm#BABEDFGB
  This can simply be queries on the tables of your own group, which probably would control membership by username.

  You ask a question about the use of built-in tables, but do not want the built-in administrator groups?

  Many important changes, but none that should affect you in what concerns the authentication/authorization.

  Scott

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• Repair Windows scam - cannot control panel access control or workstation "Windows Explorer has encountered a problem and needs to close."

  Original title: repair Windows scam - Can can't Access Control Panel or workstation

  My system has been recently infected with "Windows" repair"virus. I managed to delete using Super Anti-Spyware, but all my desktop shortcuts are gone (hidden) so I downloaded "Unhide.exe" and get all my shortcuts. Most of them seems to be working as before, but there are a few, such as 'My Computer', ' Panel, "My Documents", or even "Windows Explorer", which I can't access.» When I try to open them, I get this popup box saying "Windows Explorer has encountered a problem and needs to close" how much he out me of my office of kicks.

  Any suggestions?

  Thank you!

  Brian

  The best way to solve this maybe just create a new user account, transfer your personal data to this account, and then delete the old account. Make sure that you perform the system restore after you did the new account and everything works fine. To purge the system restore, simply disable it then again. Be aware that the creation of a new user account is not the means to get rid of malware. But it is perhaps the best way to get rid of some of the after effects. However, I recommend you scan with Malwarebytes before running these instructions. After scanning you may not create the new account.

  In addition, Jose is correct. Good number of new forms of malware prevent the start in safe mode. Trying to force booting in SafeMode with msconfig, you end up with a boot loop.

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• WRT54G2 Dropping connection with active Access Restrictions

  Recently, we have replaced Nano from my 13 years with a key, which means that it can now access the internet from (almost) anywhere in the House.  So I did some research and found the WRT54G2 of Access Restrictions.

  I got the WRT54G2 for 5 years, and it has been extremely reliable.  I'm a programmer (although, ironically, not necessarily PC-savvy!) who works full time at home, and I have no problem with the network.  But now that I have implemented Access Restrictions, he abandoned his connection once or twice a day.  So it falls, it becomes quite slow.  Once it comes down, I unplug the router, wait 60 seconds and plug back in.  Then everything works again.

  I found no other people (in the forums) mention the same problem, but I hope someone can help out me.

  Access restrictions are the following:

  • Status: activate
  • Change the list of PC: IP range 01:2 ~ 254
  • Days: every day
  • Opening hours: 24 hours
  • Blocked Services: NO
  • Blocking of the website with URL: white
  • Blocking of the site by keyword: naked, nude, etc...

  I have 3 polciies due to the number of keywords I am trying to block, given that each policy allows only 6 keywords.  Policies are all set to the top in the same way except, of course, the key words.

  The WRT54G2 is model V1, and the version of the firmware is 1.0.01.   The upgrade of the firmware help?  Download from Linksys for model 1.0 page, says "no available firmware/driver download.

  Access restrictions, "IP Range 01" should be in 100 ~ 149 instead of 2 ~ 254?  I am train to restrict our family office, my laptop, iPad and keys - anything in the House with internet access.

  Thanks in advance for your help.

  Yes, I think that any other additional filtering that by default will slow down most any router. It is probably more problematic for wrt54g2 because if it is little CPU and memory.

  I guess you can try to reset to the default values and reconfigure him from scratch. But still, I don't think that the wrt54g2 has a very large CPU that can handle a large number of filtering.

  Maybe try a solution like Norton DNS DNS? Or open DNS? Instead of access restrictions. I don't know, I'm not real experienced with access or parental control restrictions.

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• Access controls and IP addresses

  Could someone clarify something for me, make access controls restrict access to a volume of only specified IP address or allow access to any IP address of a computer that includes the specified IP address...

  An example of what I mean...

  I have a volume 1, which has a record of access control of 192.168.1.10 and nobody else.

  I have a server with two connections isci switching, 192.168.1.10 and 192.168.1.11

  When I look at the current connections on the volume it shows both the addresses IP as having connections - but I would like to only one of the for connect.

  Additional ACLs are hidden, being created on the fly.  This prevents also maxing out limit ACL and speed up the login process.

  Ideally iSCSI should be on its own subnet, with dedicated network cards.  You can use the remote installation wizard to define subnets are available for iSCSI use.

  It is a characteristic of the ACHIEVEMENT.  Initiator iSCSI MS if SUCCESS did not you will need to define each path connection manually for each volume.   Successfully, you need only one discovery entry, HIT does the rest.

• Wireless Internet with 'limited access '.

  I tried to connect my new laptop Dell Vista to our network wireless at home. After many unsuccessful attempts (due to an unknown "logon doamin") I was finally able to connect to our server, however, with "limited access". Despite having "limited access" internet still does not work. Is anyway to solve this? We currently have two other laptops that work well on the wireless network.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? Make sure that the computer is trying to connect to the correct router as there may be
  another strong signal near her.

  Other Vista computers? You use the WPA/WPA2 security?

  Actually try updating your driver and disabling the network logon. Use a wired connection or download
  pilots on another machine and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• message from Windows 7 system is unable to open the access control editor. invalid syntax

  Hi, I recently bought this pc, asus n551jk, which came with windows 8.1, I switched to 10 windows because windows 8.1 give problems, so I had problems with windows 10 crashing on some games, so I decided to go back to windows 8.1 and all of a sudden I couldn't. don't know how windows.old has been deleted, but it wasn't the case to be found, and no, it wasn't a month yet since I went. After many crashes and intentions powerless to find a solution, I decided to go to windows 7. I installed windows 7 and had a multiboot windows option 10 and windows 7 successfully, but it was weird cos I just installed windows 7 on the c: drive, but now I had folders windows.old and windows.old000 on the c: drive and had also, folder windows on drives C and D, don't delete anything simply decided to restore my previous backup files, the files do not have restore to the usual places and it was all mess really, I had several repeated files, up to this point, everything worked perfect, so I decided to install updates and restart windows, after restarting, I realized I didn't have a multiboot option more, windows 10 had completely disappeared and had Windows 7 , and when I connected, I decided to get rid of some repeated files to free up space, and I noticed that I could not remove anything, when I clicked on delete, nothing happened, even no error message, nothing, nothing at all, I tried with several files and it remained the same. I looked for solutions on the net, tried to give me the privilege administrator cos it seemed to be the problem, then I noticed that I had 2 users, one of them which was 10 windows user and current user of windows 7, and the funny thing is that with the privilege of administrator is the user windows 10. but I can't access windows 10 more, then why? How is that possible? I have still two files windows.old, why have I lost access to the windows 10? It didn't remove boot options. then I went to windows.old000 and rendering account this is the folder that I had the privilege of administrator to the course, I could remove/change anything in this file outside of this folder, I couldn't do anything else, I could access the older records, but I could not change or do something with them and once again windows.old000 is on the c: drive, on which I have windows 7 installed. And why have I lost access to the windows 10 if I never deleted it, not even by mistake. and I've tried the command cmd / active: Yes NET LOG ADMIN and that I received was that USER cannot NOT BE FOUND. so I would be grateful if anyone can help cos im frustrated, I don't want to go back to windows 8.1, I have the drive, but its got a lot of questions. Thanks in advance-

  Hello

  Welcome to the Microsoft community.

  Since the beginning of the question and not tried troubleshooting, there seems to be a lot of mixing upwards and there might be conflicts on Windows files for each installation. The best option recommended for everything what you back up data and start with the new facility.

  However, you can refer to the suggestions posted by Shishira D and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cant-open-access-control-editor-access-is-denied/0b938de0-620C-417f-a2b6-50a9c7f58766?DB=5

  The steps include also the right command to activate by default. You can enable the default Administrator and check if you are able to access your data in the default administrator user account.

  Hope this information helps.