Venue 11 Pro system freeze when AC is unplugged

Similar Questions

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• File system freezes when I right click on an icon

  When I use the file system whenever I do a right-click on an icon, the whole file becomes unresponsive. Even when I try to use the Ribbon at the top to - for example, create a new folder - it freezes.

  Any ideas?
  Thank you.

  See if this will help you before you consider relocations.

  ShellExView v1.41 - Shell Extensions Manager
  http://www.NirSoft.NET/utils/shexview.html

  Make a right-click is slow or weird behavior caused by context menus managers
  http://WindowsXP.MVPs.org/slowrightclick.htm

  Also test with another user.

  Try Safe Mode and clean boot procedure.

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Acrobat Pro DC freezes when creating a PDF from the Clipboard and gives an error message when you create a pdf from Microsoft Word 2016.

  Two weeks ago I have upgraded to Adobe Acrobat Pro since Acrobat Pro XI DC. Create a PDF from Clipboard in appearance from a status bar results, lessons for 25%, at which point Acrobat "freezes" "." " Similarly, when using the feature to create a file PDF in Microsoft Word 2016, a progress bar appears, gets to 25%, then the error message "Microsoft Word has stopped working", restart Word, and a message recommending that the Acrobat Add-in is disabled. I'm on Windows x 64 on a Lenovo X 1 carbon 10. Is there a "fix" to these questions?

  The word problem seems more likely to have a bug introduced by Microsoft in their last update for Word 2016, a couple of weeks. Someone posted a way to get Word to revert to a version:

  To revert to a version earlier office 2013 or 2016 Office in the form of installation of Office 365, you must use a command line and specify the build number, that you want to return.

  1. As Office 365 facilities are automatically updated in the background, you must disable the automatic updates first. This can be done in any application Office 365 via:
     File-> Office account-> Update Options-> disable updates
  2. Open a command prompt:
     1. Start-> type:cmd
     2. Click on: command prompt
     3. Choose: Run as administrator
     4. Provide your credentials to the administrator or to confirm the user account control dialog box when you are prompted.
  3. Type the command below that applies to your version of Office or Windows
     • Office 2016
       cd %programfiles%\Common Files\Microsoft Shared\ClickToRun\
     • 2013 office under Windows 32-bit
       cd %programfiles%\Microsoft Office 15\ClientX86\
     • 2013 desktop on 64-bit Windows
       cd %programfiles%\Microsoft Office 15\ClientX64\
  4. You can specify the number of bed to regain in the following way:
     officec2rclient.exe /update user updatetoversion=
     • Replace with the build number that you want to return. There is a preview of version numbers, you can return to the Office 2013 and 2016 Office.
     • Example to return to the release of January 2016 office:
       OfficeC2RClient.exe /update user updatetoversion=16.0.6366.2062
     • Example to return to the release of January 2013 office:
       OfficeC2RClient.exe /update user updatetoversion=15.0.4787.1002

• Satellite Pro U400 freezes when toshiba load screen appears

  Please can someone help me!

  When I turn on my U400 it gets to the loading screen toshiba, but then everything freezes and used further.
  I tried f2, f8 and f12 but also simply freeze and goes no further.

  The hard drive light flashes at the start but then stop!
  The battery and the power cable are fine and so is the cd drive such that all continue to work.

  Can a little help if you please?
  I'm a beginner and this is my first laptop!

  Please PLEASE help me.

  Hello

  It seems that the laptop can not pass the Toshiba start screen properly
  What does that mean?
  Well, it means that an error has been detected during POST (power on self test).
  It could be everything. Memory faulty RAM, motherboard part etc.
  It is difficult to provide an accurate answer to this question, it would be necessary to check these parts first.

  Since you are a beginner, I recommend you contact a Toshiba (certified partner) ASP in your country guys may run diagnostic tests to discover the problem.

• System freezes when I play Starcraft:Broodwar on Windows7

  Hello

  last week, I installed Windows7 on my computer and since then, I have problems with my favorite game Starcraft Broodwar.
  It worked perfectly under Vista, but now it's just crappy and unstable. My PC freezes after 10 minutes, healthy, I can play for hours and nothing happens. The strage thing is the fact that my music keeps runnig and pc turns off, it just runs and runs until I touched the powerbutton. The music continues to turn all time but no key to answer.

  All my drivers are up to date and I have all the patches for Broodwar.
  I've also tried for several previous Versions of Windows Compatibility Modes (Windows XP SP2/SP3, Win2k and so on). I also tried 256coulor modus and stuff, and I also run this program as an administrator.

  I hope that someone here got an idea.

  Greetings,
  Marty

  Marty,
  Have you tried to run the game after a clean boot?  If this isn't the case, I would say that to give a try just to help to eliminate other software that might interfere.  Here is a link with instructions for how to perform a clean boot: http://support.microsoft.com/kb/929135

  As I searched for more information on this issue I found one thing that you may want to try and see if there is help.  It seemed to solve some problems of users (However, the questions were a bit different from yours).  Uninstall the game and then when reinstall you it, run the Setup in compatibility mode.

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• It is typical that firefox can use 339 600 K (shown on the Task Manager and seemed to work) to show an image? My entire system freezes when that happens

  I was looking at pictures in an e-mail, (PDF), and firefox is running 339 600 K and froze my system. Is this typical? He just kept which passes I waited, however, the screen turned gray (with e-mail showing under) and after about 15 minutes, I decided that was pretty long and updated version of the browser (or the arrow from small circle). Then I could do it again, but it kept happening on every third image.
  Thanks in advance for your advice

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Firefox using too much memory (RAM) - how to fix
  This article describes how to make Firefox use less memory to make it run faster and prevent accidents.

  https://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster

  https://support.Mozilla.org/en-us/KB/Firefox-uses-too-many-CPU-resources-how-fix

  https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding

• Today, the two disc cleaning & restoration system freeze when I am at the point to run the end process

  both disk cleanu & lock-up @ last execution stage of restoration system

  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
   
  --
  ..
  --
  "denroxi" wrote in message news: 64ffc529-7d1f-4347-b3d9-b05cc03ccede...
  > both disk cleanu & lock-up @ last execution stage of restoration system
   
   

• System freeze when it is opened the tool update BIOS, how can I update the BIOS?

  I'm trying to update the BIOS on my 14 (1016tx) want.

  I downloaded the latest BIOS from the HP website and open it, the dialog box has 2 buttons only start at 1, output 2

  Click 1 start, then another dialog box pops up saying not to stop your computer blablabla... and asks me to confirm, OK or cancel

  However, all input devices have no answer at this time. No keyboard, touchpad, usb mouse no longer works. USB ports seem to be put off, since the light on my usb key is off.

  The power button does not work neither. I continue to press it for about 1 minute, just can't turn off the machine and I have to remove the power cord and the battery to stop the crazy fan.

  p.s. I just installed the operating system. (Windows 7 Professional 64-bit) until I try to update the BIOS.

  Thanks for the quick response.

  I managed to fix everything on time. It seems that the problem was caused by the absence of HP_TOOL partition on my hard drive.

  I downloaded the UEFI BIOS HP update and installed it, he created a partition of 2 GB HP_TOOL for me, and then the BIOS update tool work (it will restart the computer to update the UEFI BIOS and BIOS update).

  P.S. Just wonder why HP releases suck a stupid tool. If it relies on a HP_TOOL partition, it should just say that instead of drive the crazy fan and disable all buttons!

• Random freezes when performing a stack, dv6-3110sg

  Hi all

  I use an HP dv6-3110sg laptop under Windows 7 Home Premium.

  For about a month now, I have experienced random system freezes when I was using the laptop on battery, i.e. without the charger plugged. Sooner or later, at a random time during the use of the laptop, the screen completely freeze, with not even a movement of the mouse cursor or anything else in response, until I took out the battery and held the power for a few seconds. This problem does not occur when you attempt to use windows safe mode, or a distribution Linux live USB, so I thought a recovery could help. However, after you recover the laptop the integrated minimum image and download of HP and Windows updates for several hours, the problem persists when you use the battery. I thought that the battery may be faulty, so I plugged in the phone my mother, which is the same model, but despite this, the system froze after awhile. Try to use the battery for HP Support Assistant check (what is said and all the drivers and software, are up to date, incidentally) yields a "Check the battery has stopped working" error message, although when you click on 'other details', the problem seems to be a 'file not found exception', so I could use a link to a check of the battery work for me download. I also used the battery test in BIOS diagnostics utility (by pressing ESC during boot by pressing F2 [I think] for diagnostic options, and then selecting test battery off of the menu), however, only one was completed after 15 seconds and apparently everything was fine there.

  So I could really use some help with this problem here, cause I can't understand what is the cause. Don't forget that so do a hard cover and replace the battery with a new one, have not helped so far. I would appreciate it so all the tracks on the way to proceed. Thank you!

  EDIT: I should also mention that this time he comes with the on dedicated mobility AMD and Intel HD graphics graphics. But only when executing a stack, it's fine if the laptop is plugged.

  I solved it now.

  Made a recovery not from the integrated partition, but the recovery of the DVD that I created after I bought the computer. Somehow, that did the trick, no more freezes. Why my installation and my recovery partition has become suddenly strange, I have no idea. But at least everything works now. Thus, one who reads this: don't forget to create your recovery DVDs!

• MacBook pro freezes when the mouse stops

  I have a very strange problem with my Macbook Pro 13 "Retina display.   When I login, the system freezes once I have stop moving the mouse.  If I permanently move the mouse, the system works, but if I stop moving for about 2-3 seconds, the system hangs and I have to force turned off using the power button.  I have troubleshooted all the way to the bottom for a pure install of El Capitan 10.11.6 but even after cleaning install it always does the same thing.  Of course, it looks like a HW problem but I just wanted to see if someone else has had this problem and if there was a solution that was not related to HW.

  mblas49 wrote:

  I have troubleshooted all the way to the bottom for a pure install of El Capitan 10.11.6 but even after cleaning install it always does the same thing.

  It would be more helpful if you listed what you've tried already, we can't look in your mind. But, run the Diagnostics to start.

  Diagnosis of Apple is not as complete as the software they use at the Apple Store, but it can pick up something. Depending on the age of your system, you'll use one or the other.

  https://support.Apple.com/en-us/HT202731

  Diagnosis - Apple Support

  Apple Hardware Test

  https://support.Apple.com/en-us/HT201257

• MacBook Pro freezes when connected to external speakers

  Hello

  This happened to me twice in the last two weeks, both times in the same circumstances. I take my mac at the Apple Store tomorrow, but I found it worth to post the question here:

  My Macbook Pro freezes when playing iTunes AND connected to an external audio system. Won't happen only when it is connected to the headphones or when you use the internal speakers. This does not happen immediately. It took about 10-20 minutes, and the specific song ends to play even if the computer is already frozen. I wonder what follows:

  This could result in the latest version of iTunes (12.3.3.17)?

  Or is there something funky going on with the material of my Mac?

  FYI, I have a Macbook Pro, 256 GB early 2015 and I've just updated to the latest OS (El Capitan 10.11.4)

  Any suggestions are welcome. Thank you!

  Could be due to the failure / faulty USB hub or cables (USB or audio, regardless of your game to the top). Try to connect without a hub (if you are using one) and with different cables.

  Given that the issue does not appear when you use a headset, I don't think it is related to iTunes.

• My first pro cs6 adobe freezes when I create a title?

  My first pro cs6 adobe freezes when I create a title?

  Hi Caleb,

  What is the operating system that you are using?

  You have third-party fonts are installed on the computer?

  Close Premiere Pro.

  Go to the Documents folder > Adobe\Premiere Pro\6.0\Styles and remove workingset.prsl

  Check again.

  Vinay

• my pc freezes when first pro cc makes make 98%

  my pc freezes when first pro cc makes get 98%, it happens in the encoder to. This isn't the files. I put the file to project from the hole and the content of my work server and other computers it opens and makes it sound very well. but where mac computers and I'm on pc. I have the last cc first pro downloaded from cloude and my graphics drivers are up to date. My specs are:

  Processor (AMD Phenom™ II X 6 1055 t. CPU (6 x 2.80 GHz/6 MB of L3 Cache)
  Memory (Module of memory DDR3-1333 4 GB [2 GB X 2]

  Video card (NVIDIA GeForce GTX 550 Ti - 2 GB - single card)
  Motherboard (ASUS M5A97 - AMD 970)
  

  4gig of RAM to load a Windows 64-bit and a 64-bit Premiere Pro leash "virtually nothing" for the program to actually DO something

  Your least 8gig ram upward and try again... also, what is your version of the nVidia Driver?

  Right-click an open area of the Windows desktop

  Select NVIDIA Control Panel from the pop-up

  Select the SYSTEM INFORMATION in the lower left corner

  Version of the driver should be the 1st line in detail

  I have a GTX285 using 296.10 and Win7 driver