Venue Pro 11 5130 - why Win 32 b

I was trying to understand why the version of Windows on the 5130 is only 32 b while the atom is capable of 64 b.

Are there any other restrictions of material affecting the upgrade to 64 b?


Due to the Standby connected. It is only supported for 32-bit OS at this time.

Tags: Dell Tech

Similar Questions

  • Venue Pro 11 5130 power settings update 1.0 A01

    Brian or someone from Dell, can you please tell me if the executable in today (24/01/2014) power settings update 1.0 A01 (for model 5130), is supposed to launch a command window that closes almost immediately after its opening... that means it successfully installed? Before installing, I already did the regedit changes but wanted to install it anyway, just in case it included other changes.

    I expected at least a message box to reset or restart, so my impression was that the latter had failed, but not sure.

    Thank you


    When he closes this way, it has been successfully installed.

    1. Double-click the new icon on the desktop labelled SelSuspDisable_ZPE.exe
    2. The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\2N173.
    3. The Self-Extractor window appears.
    4. Click OK.
    5. After completing the file extraction, if the Self-Extractor window is still open, close it.
    6. Click the Start button and then click Run.
    7. The File Manager Box C:\DELL\DRIVERS\2N173 opens up.
    8. in the File Manager Box double click the application SelSuspDisable.
    9. A command window will open up and close again. The command is executed.           
  • Question about the charging light on the venue Pro 11 (5130)

    I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

    Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

    White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

  • SIM card in the venue pro 11 5130?

    Installed Sim Card does not show in the networks. I have to install a WWAN hardware?

    Yes.  The SIM card by itself doesn't help - you need a card high speed MOBILE compatible with the network of your ISP.

  • Why Dell has paralyzed the Panel advanced configuration options of power on the venue Pro 8?

    Reference paralyzed Dell Control Panel advanced configuration options of power on the venue Pro 8.

    Dell must provide a patch restores full power plan setting up advanced features of Windows.

    Adding a new default Dell Windows power plan doesn't bother me, but they must not paralyze the Panel Windows distribution, power options, or remove the standard Windows power management.

    That has something to do with the sleep settings connected / configuration Microsoft / Dell are doing on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports. With Eve logged onto the available settings are limited to what would not interfere with it. If you would change settings (e.g., SSD or Wifi Powermanagement Disabled) issues as sleep function in the process of disappearance and others. Microsoft also has requirements to be connected certified standby.
    Again, not 100% sure if it's MS or Dell do but my guess would be Microsoft because I saw the same thing with different units.
    If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

    Use the command Regedit and change the following:
    Change the value for the key CsEnabled from 1 to 0 and reboot.
    1 means connected off standby active and 0.
    Try it and see if it solves your problem.

    BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

  • You just bought a macbook pro retina. Why the resolution of the camera is terrible?

    You just bought a macbook pro retina. Why the resolution of the camera is terrible? Is there a solution?

    The facetime camera is only 720 p, which is 0.92 megapixel. Same 1080 p is only 2.07mp.

    It's really designed only for video calls, if you really want to make HiRes video on the internet.

  • Venue Pro 11 (7130): replacement SSD?

    Does anyone know if you can replace the SSD in a venue Pro 11 (7130) and if so where you can get them from?

    I had the same problem and after searching the internet forums that associated with a SSD for my Dell coming Pro 11 months replacement, I found a solution that works so far as well as the original SanDisk. I bought a 512 GB, Transcend, MTS600 P/N - TS512GMTS600, that I cloned from the factory using Acronis True Image 2014 drive. BTW, the cloning was working after disabling by default enabled encryption file. Hope that it will also be the solution for you.

  • Why Win 7 takes hours to update?

    I just reinstalled Win 7 on my computer after that it totally collapsed for some unknown reason, but after installation and activation of Windows it still tries to find updates and so far it has worked for several hours.

    Is there a problem with Win Update ' cos I've never known that it takes so long to put aside since then, he has tried to install Win 10 on my machine, but I won't be using Win 10.

    If anyone can answer my question about why Win update taking so long?

    All I can say is to ensure that you have the latest Net framework installed manually 4.6.1

    And the most recent client update

  • I want to install Win 7 Pro 64 bytes on Win 7 Pro 32 bytes.

    I want to install Win 7 Pro 64 bytes on Win 7 Pro 32 bytes. I would lose my Microsoft Office 2007 and files, 3rd party software. If so is there a way to save them? How can I backup my Outlook pst. file? Is that all I have to do it before I try it?

    You cannot go directly from the 32-bit to 64-bit.  The best thing to do would be to create a new partition and install the 64-bit version in that.  You will have access to the data on the partition of 32 bits, but will need to install your applications in the 64 bit one.

    Good luck.

  • Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc.) disappears when I move the window

    Recently in Acrobat Pro 9 Ver for Win 7 the menu bar (File, Edit, View, Document etc.) disappears when I move the window. . only happens when I have a pdf file open. . everything worked fine until a few days ago. . F9 solves the problem until I have move the window again. . I realize that my version is old so I tried tried download XI player and having the same problem. . any help would be appreciated

    Found the Solution. . It's know bug with Kaspersky Anti Virus 2015... the solution is to upgrade to version KIS Kaspersky Lab Forum > Bug: KIS version patch B Acrobat Reader XI

  • Venue Pro 11 (7140) 64 bit Win 8.1 - Audio volume

    Playing music from YouTube with the browser Tablet volume controls and the Max value, through the Tablet 1W speakers is clear, but the volume level is not optimal. The same is true when listening with head-phones is plugged. Memory, a few webcasts (product launch of MS for example recent) may have low volume levels available, and so with the tablet at maximum volume, these emissions could be difficult to follow.

    When I connect the Tablet taken head-phone to an external sound system, the latter also the Max value, the noise level is not much better.

    Is the maximum volume of the room 11 Pro 7140 (internal speakers and head phone port) is limited by design?

    However, when I connect the tablet to a TV via an HDMI cable, the audio level of the TV is sufficient such that I can have the TV set at the level volume normal, or even turn it upward due to a level very hard! This suggests that the noise level in the HDMI cable is superior to the helmet of the tablet.

    I also have the Dell docking station, and at the level of the headphone port is is not better than the tablet itself.

    If there is no solution through a setting within the Tablet, it is perhaps possible to buy a USB2/3 device for the tablet that will give me an output signal line to the external sound system, to a level higher than that available from the helmet of the tablet.

    Any thoughts?


    Hi Brian,.

    Thanks for your reply.

    Solve the problem itself, and I now get a sufficient signal to drive the external audio system, the head-phone jack or the 7140, or the docking station, such that I don't need to adjust the maximum volume.

    I don't know how it is resolved itself (maybe finger hurt), but I noticed as I now get a Dell Audio / Maxx Audio 3 pop up when the connection head-phones or the external audio system, asking "what plug in camera?

    If the volume of the internal speaker (max value) is too low or not is debatable, but more a high-volume internal speakers probably would not be desirable in business scenarios for which the 7140 has been designed.

    Thank you, James (Chichester, United Kingdom)

    We are quite limited in what we can achieve for a maximum volume and a tone due to the limited size of the device.   I'm glad that the issue is resolved on its own.

  • Venue Pro Win 8.1 Pro with updated photo App 11

    The camera App win changed suddenly 15 shooting burst. A google search that results in phone solutions. Does anyone know where return to the shot. All options are available on Win Phone but do not seem to be on PC Win? Any help or enlightenment welcome.

    Forget this question. She recorded one shot so I ignore the shooting 15 selection. It was an unexpected improvement.

  • Help! -New Dell i3847 - Windows 7 Pro - Dell Recovery Disk Win 8.1 & DBaR don't make a backup of the system

    I bought a new Dell i3847 and it has Windows 7 Pro 64 bit installed at the factory on it.

    I wanted to make a complete backup of the system, but the Dell Backup and Recovery software does not allow me to make a backup of the system.  In addition, I was unable to create a system recovery disk using Dell backup and restore.

    I can't use the drive system recovery expected Dell because it clearly states Windows 8.1

    (1) why is a Win 8.1 drive included with a Win 7 Pro 64 bit system?

    (2) what is the problem with Dell backup and recovery that she:

    (a) cannot create a recovery disc factory

    (b) allow me to create a backup system so I can go back to the factory State


    It has been 2.5 hours and it is still "initialize disk" to create a recovery of the plant.  It usually somewhere fails during initialization or in writing.    Spend hours for each failed attempt to create a factory recovery disc is NOT GOOD!

    The factory restore disk was finally created.

    Dell is now a person pays create a backup system and the user must download a update to do so.

    Microsoft has a tool to create a system image and make a recovery / restore disc which is free.

    So, I used DBaR do restore disk by the factory.

    However, to make a system image and a recovery / restore for that, I used windows 7 built in software.

  • Acrobat Pro XI install in Win 10

    I'm trying to install Acrobat Pro XI in an environment of 10Pro Win. I get a Java script error and stops the installation. I just tried to re - run the downloaded installation program, and then find the deleted file? How and why?

    How do you install XI on this system?

    I was able to install after a reboot. Thank you

  • Satellite Pro M30: Needs to win 7 SD card reader driver


    I've updated my old Satellite Pro M30 of Windows XP to Windows 7.
    Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones but do not work.

    I downloaded those from Toshiba, but when everything is installed and I put the SD card, I and alert on Device Manager that says "conflict resources" error code 12.
    Toshiba SD Card Controller Type A
    Toshiba SD memory card reader

    What is the right driver? PLEASEEE

    > Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones, but do not work

    Win XP drivers do not work with Win 7, but you should try some drivers for Vista.
    Try some drivers released for other series...

    Also try this:

    You can go to Device Manager-> properties-> Details tab SC card reader

    You can find something like that.
    PCI\VEN_1217 & DEV_7120

    FRI means provider
    DEV: device

    Then, you can find the identification numbers using this database of the PC:

    This help to find the pilot!

Maybe you are looking for

  • Apple TV 4 Siri distance problems :/

    OK so I got the apple tv 4 (the newest one I think) since Christmas and everything is going well, but last night something happened to the remote (idk what) and now when I try to drag around it does not. Also the main buttons like menu, siri, and the

  • ThinkPad Twist WWAN antenna?

    I'm sure that many people will ask that, so I think that we need a clear answer from Lenovo. For those who have not ordered a WWAN card in their original config is the WWAN antenna pre-installed on the screen or not? My model came with the SSD, so th

  • USB docks/pass-through/techniques...?

    Does anyone know if Motorola (or any third-party company) has any plans to release a better dock for the Xoom, preferably one at least a USB port? I have a kind of doubt Motorola will be at this stage, but it would certainly many of us happy that I a

  • Microsoft Broadband Networking Wireless Base Station MN-700 and try to connect IPod touch

    Request password and when I enter the password I thought that it is wrong, but when I connect the web site management tool is the password. Please help me to connect my ipod to my wireless network.

  • How to create this effect of shadow to the text?

    Hi allI don't know what I should call him, but I've seen a number of this shadow effect behind the text 'SALE' and always wondered how to do this.I tried to mix the tool with text copied to 45 degrees, but it doesn't seem to work.Is the pen tool to c