Venue Pro NFC 7140 - disabled

Similar Questions

• Venue Pro 11 (7140) 64 bit Win 8.1 - Audio volume

  Playing music from YouTube with the browser Tablet volume controls and the Max value, through the Tablet 1W speakers is clear, but the volume level is not optimal. The same is true when listening with head-phones is plugged. Memory, a few webcasts (product launch of MS for example recent) may have low volume levels available, and so with the tablet at maximum volume, these emissions could be difficult to follow.

  When I connect the Tablet taken head-phone to an external sound system, the latter also the Max value, the noise level is not much better.

  Is the maximum volume of the room 11 Pro 7140 (internal speakers and head phone port) is limited by design?

  However, when I connect the tablet to a TV via an HDMI cable, the audio level of the TV is sufficient such that I can have the TV set at the level volume normal, or even turn it upward due to a level very hard! This suggests that the noise level in the HDMI cable is superior to the helmet of the tablet.

  I also have the Dell docking station, and at the level of the headphone port is is not better than the tablet itself.

  If there is no solution through a setting within the Tablet, it is perhaps possible to buy a USB2/3 device for the tablet that will give me an output signal line to the external sound system, to a level higher than that available from the helmet of the tablet.

  Any thoughts?

  JasKITS

  Hi Brian,.

  Thanks for your reply.

  Solve the problem itself, and I now get a sufficient signal to drive the external audio system, the head-phone jack or the 7140, or the docking station, such that I don't need to adjust the maximum volume.

  I don't know how it is resolved itself (maybe finger hurt), but I noticed as I now get a Dell Audio / Maxx Audio 3 pop up when the connection head-phones or the external audio system, asking "what plug in camera?

  If the volume of the internal speaker (max value) is too low or not is debatable, but more a high-volume internal speakers probably would not be desirable in business scenarios for which the 7140 has been designed.

  Thank you, James (Chichester, United Kingdom)

  We are quite limited in what we can achieve for a maximum volume and a tone due to the limited size of the device.   I'm glad that the issue is resolved on its own.

• Venue Pro 11 (7130): replacement SSD?

  Does anyone know if you can replace the SSD in a venue Pro 11 (7130) and if so where you can get them from?

  I had the same problem and after searching the internet forums that associated with a SSD for my Dell coming Pro 11 months replacement, I found a solution that works so far as well as the original SanDisk. I bought a 512 GB, Transcend, MTS600 P/N - TS512GMTS600, that I cloned from the factory using Acronis True Image 2014 drive. BTW, the cloning was working after disabling by default enabled encryption file. Hope that it will also be the solution for you.

• Why Dell has paralyzed the Panel advanced configuration options of power on the venue Pro 8?

  

  Reference paralyzed Dell Control Panel advanced configuration options of power on the venue Pro 8.

  Dell must provide a patch restores full power plan setting up advanced features of Windows.

  Adding a new default Dell Windows power plan doesn't bother me, but they must not paralyze the Panel Windows distribution, power options, or remove the standard Windows power management.

  That has something to do with the sleep settings connected / configuration Microsoft / Dell are doing on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports. With Eve logged onto the available settings are limited to what would not interfere with it. If you would change settings (e.g., SSD or Wifi Powermanagement Disabled) issues as sleep function in the process of disappearance and others. Microsoft also has requirements to be connected certified standby.
  Again, not 100% sure if it's MS or Dell do but my guess would be Microsoft because I saw the same thing with different units.
  If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

  Use the command Regedit and change the following:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
  Change the value for the key CsEnabled from 1 to 0 and reboot.
  1 means connected off standby active and 0.
  Try it and see if it solves your problem.

  BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

• Why can't encrypt a PDF document with a password? The options are visible in Adobe Acrobat Pro XI, but disabled so I can't use them

  Why can't encrypt a PDF document with a password? The options are visible in Adobe Acrobat Pro XI, but disabled so I can't use them

  It was because my document is open read-only. When I corrected that I could apply the password.

• Venue Pro 7140 11 - battery life jump upward or the alert?

  Is there that autonomy alert / popup, I can set so I am notified when the battery is almost discharged?  It just stops and I can't have that happen in the field.  I need the desktop but not on the side of Android.  I found an application of autonomy, but it does not help when the Office to do tests on the ground.  I need to be notified when it is low... ;-(

  Wow, it looks like that Dell Support Forums is as good as Online Chat and calling the 800 # SMH... I thought about it myself.

  go to power options and change time of notification to 10%, or when you want a notification appears.

• HP OfficeJet Pro 8600: Scan - disable the 'Save' button with MAC OS 'SIERRA '.

  Hello world

  I have an Officejet Pro 8600 installed in a Macbook pro.

  After having upgraded to Mac OS Sierra (10.12) 'Save' button in the HP scanning software is now disabled when the save screen appears. Save documents are possible using the 'Test' option in the menu "Preferences".

  It worked fine with the latest version of 'El Captain'.

  I've searched for scanning HP new version for Mac OS Sierra, but nothing.

  Someone has any idea how to solve this problem?

  TKS in advance.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• Windows 10 build 9926 unusually heavy use of CPU on the venue Pro 7130 i3 11

  Define how the other owners of 11 Pro 7130 meeting places had good success in the management of the Windows 10 preview, I conducted today a place in upgraded from 8.1 to 10 build 9926 (the one with the Continuum, which is great), but I'm having the issue of constant between 50 and 99 percent high CPU load , with no guilty in the Task Manager. Before you go to format and do a clean install I wanted to ask if anyone knew this problem.

  EDIT: the unusually high load seems to be triggered by a process called Windows Driver Foundation - user, whose executable mode driver is wudfhost.exe.

  A complete reinstallation did not help.

  EDIT 2: If someone experience the problem, disable completely the service named "Windows Driver Foundation - user-mode driver framework" helped, with seemingly no ill effects, although after weird restarting it may need to be disabled later.

  As a warning, I note how in general, it is never a good idea to go mucking in services.msc.

  Some information about my experience with the Windows preview 10, the two pre - and after Cortana on a Dell coming Pro 11:

  1. Builds before the last Technical Preview 9926 looked much more like Windows 8.1
     1. They shared the same start menu and app store. It was almost like 8.1 with all it's bugs ironed out - and a few goodies in. Really worked well on my V11P.
  2. 9926 build adds many new features - but also adds tons of bugs.
     1. Look around the net and you will see common problems that are corroborated by many users of the technique of the preview. You will have to take the good with the bad.
  3. Upgrades (from 8.1 to 10) on-site are problematic - ESPECIALLY with the most recent Technical Preview 9926
     1. My installation of the latest version of Win10, migrate my settings 8.1 resulted in an installation with tons of questions. My Active stylus barely worked - sensor HID driver will fail to load and having problems. He would go to the mode standby and never go on low power, draining my battery. He had 100% fail still to wake up from its sleep - I would get a black screen that requires a hard shutdown and reboot. I also had the CPU usage very high with the WDF service. As mentioned above.
     2. Overall, a lot of things online really as you can imagine - and this is frankly not worth it to upgrade on site.

  So, with that said - what was the solution?

  New installation.

  Here are the steps to get the best Windows 10 installation on a coming 11 Pro (I know - in my experience).

  1. Download the version of ISO - installation of a USB disk with the utility in Rufus 
     1. Boot on it by pressing volume up several times during boot up until you get the boot menu. Then use volume up to move to the bottom of the list - low volume to select the highlight boot device.
     2. After the installation of the key USB - copy the most recent copy of Dell Wireless driver for your Intel/Dell Wireless card, a copy of 7-zip, and a copy of the latest Dell cabin Pack for the 7130 file in a directory on the USB drive (make one, name drivers or something).
  2. Install the Windows technical overview 10
     1. Delete all partitions on disk 0 (or whatever your SSD) until you have one unpartitioned space - and install it.
  3. When you first - start your screen will be slow/choppy as all hell!
     1. This is mainly due to the fact that there are very few compatible drivers cooked in Windows 10.
  4. Do not start to install the drivers from the Dell site - many will prove to be obsolete.
     1. Only install the drivers from Dell/Intel Wireless to obtain network connectivity and the internet
     2. Then install 7 - Zip and extract the CAB Driver Dell file in a directory on your C:\ called "C:\Dell.
  5. Now you have a network connection - start Windows Update
  
  
  1. Windows different Intel chipset - including video device drivers will begin to download.
  2. It will ask to reboot - let him.
• Now - if your tablet is something like mine - after it restarts, it will start flickering like hell.
  1. This is the video driver Intel panic hell. Tablet may hang - just persist through the pain and continue.
  2. I found mine to panic more with the help of the touchscreen - so I plugged a mouse.
  3. Mine has been fixed by disabling "Auto Refresh Panel" in the Intel graphics options menu (click Law Office, Graphics Options). This setting can be found under the section power options.
     1. Do it and restart. My flicker ceased thereafter.
• At this point - I expected and wanted things worked, but open Device Manager
  1. (Start menu - type "Device Manager") - or-(Start Menu-> Control Panel-> Device Manager)
  2. There was a last device without driver SM Bus controller. Click - Update right driver and point it to the directory of D:\Dell you have extracted the CAB file.
  3. It was't until what I installed the driver for the device that he would go to sleep properly connected.

Now - a word of warning. Unlike earlier versions of win 10 - my Eve connected sessions drain about 1, 500 MW/h. That's what I saw in 8.1 Win no matter what I tried - I wonder if there is some sort of driver problem - and replacement needs. My sleep study reports show some offenders - everything works for less than 1% of the sleep cycle, but the material is not a descendant to C3 to sleep, which is where the power drain is. Looks like a driver chipset of a certain type of malfunction - I'll do a trace and try to isolate the problem.

Apart from that-, all has been MUCH more stable. Sleep (although draining the battery) are coherent rock, I have the high utilization of the processor in the stronger WDF service, and the active stylus works exactly as it should.

I'll stop it between uses for now - and keep stable and see if there is a driver chipset or something that solves this problem.

• Active stylus problems (coming Pro 11, 7140)

  I have a Dell Active Stylus A02, as well as a meeting place for Dell 11 Pro 7140. The problem I have is that the stylus doesn't work sometimes and that it is not more recognized by the Tablet PC. To work around the problem, reset the pen by removing / reinserting the battery still works, but is a bit annoying. This problem already known and is there a solution available?

  MarkusBB

  I have a Dell Active Stylus A02, as well as a meeting place for Dell 11 Pro 7140. The problem I have is that the stylus doesn't work sometimes and that it is not more recognized by the Tablet PC. To work around the problem, reset the pen by removing / reinserting the battery still works, but is a bit annoying. This problem already known and is there a solution available?

  While most customers have good results with version A02 of the pen, there have been some exceptions.   You should not reset the pen like that.   I recommend contacting our assistance and asking new version A00 of the stylus.   The revision has changed back to A00 following a new part number.   The new stylus can be identified easily because it is silver and black instead of black.

• Windows Update drastically reduces the noise on the venue pro 8

  The last windows update has audio output so low on my venue 8 pro I csn barely hear the keyboard. All the other audio is too low, and I set it all up as high as possible. I have no confidence that Microsoft will resolve this problem. Maybe Dell can lead to an update that takes care of this.

  jstarret

  The last windows update has audio output so low on my venue 8 pro I csn barely hear the keyboard. All the other audio is too low, and I set it all up as high as possible. I have no confidence that Microsoft will resolve this problem. Maybe Dell can lead to an update that takes care of this.

  It seems that it is a known problem. There are already other discussion forums discuss there including Microsoft... The problem occurs after you install Windows 8.1. Update 1 (KB2919355). It is already confirmed on many features including Room 8 and 11 Pro. MS has made some changes to the keyboard on the screen and re-installing the audio drivers does not help. That's what I discovered after it happened to my devices V8P and V11P.

• Venue PRO TABLET KEYBOPARD 11 - MOBILE battery

  I have a 11 Pro 5130 place and I bought the keyboard shelf with the battery. I'm having a problem with the battery from the battery of the keyboard. For some reason, the battery doesn't SEEM to be loading. It can charge only up to 30%. I've disabled the Tablet battery and tested the keyboard battery separately, and I found that the battery is not correctly lead or reload. He has ONLY shown as 30% and when you die, it provides no visual indication of the battery use declined for the keyboard. Tablets battery works fine, but the keyboard seems to be a problem. Any idea on this issue would be greatly appreciated. I tried just about anything to disable ACPI for the secondary battery, to uninstall the ACPI for the second battery to re - install. Thank you

  I had a problem where my battery keyboard (7130) charged 23%, then stopped and must always present as "do not load" and the Tablet would not use rather than ask for a replacement, I thought that I would like to study the problem.

  I removed the four screws of the base and then removed from the rear; the only thing I could see is that the battery connector to the Jack on the Board of Directors was tilted (not properly seated) so I've been pushing firmly in place. Once the keyboard is then attached to the Tablet she started loading and finally reached 100% and is now be drained before the Tablet battery.

• PROBLEM REINSTALLING ACROBAT PRO XI for disable

  PROBLEM REINSTALLING ACROBAT PRO XI and BRIDGE

  I bought a new Macbook Pro. In the process of migration of files from my previous laptop age of six year, I made the mistake of uninstalling my Adobe CC applications without first disable each one. (I must add that I have CC on another computer at home. I know that the problem of three computers with CC apps, I try to have only two. My old laptop is removed.)

  Troubleshooting call to reinstall, disable and uninstall again.

  When I uninstalled Acrobat Pro XI, it has disappeared from my computer. However, trying to reinstall, Adobe Application Manager says acrobat's "up-to-date". I saw no way to reinstall. So, I copied the XI Acrobat Pro to my other computer and it drags on my old laptop, hoping she work long enough to reinstall and turn off. PDF opens briefly, but I get an error 'Problem of Configuration, error 1', and then it closes.

  Regarding the bridge, the said Application Manager is up-to-date, but trying to reinstall in order to turn off, I get an error that my (10.6.8) operating system on the old laptop is too old to reinstall bridge CC.

  Can you help me to solve these two problems, so that I can get with the help of my applications Adobe CC on my new computer laptop?

  Thank you in advance,

  David Alcorn

  [info removed - kglad]

  with a subscription to cc you are allowed installation on an unlimited number of computers.

  However, you can only sign on, at most, two computers at the time and you must be logged in opening programs cc.  already open programs seem to work perfectly, even on a 3rd computer but I have not tested who carefully and I rarely do it (by mistake).

  and you do not enable the programs of cc.  you connect.

  you disable programs cc.  you disconnect.

  and xi acrobat could come from your subscription of cc, but that is not the last acrobat and makes me wonder if you have a perpetual license, cc subscription or both.

• MacBook Pro (2015) - cannot disable Bluetooth keyboard

  I bought a new MacBook Pro - 13 "with Retina display last year (2015). Everything has been excellent work until a week ago when I start my computer, the keyboard and the trackpad no longer work, as he begins to search for a bluetooth keyboard.

  I have never used a bluetooth on the computer and can only get this to stop after anywhere from 5-15 and forced reboots. Is there a way to fix this? I read the older forums and have tried to remove the Bluetooth.plist and restart the computer, run disk utility, but nothing seems to solve the problem permanently. For any help or suggestion would be greatly appreciated!

   Sys Prefs - Bluetooth - off?

• HP Officejet Pro 6830: HP Officjet Pro 6830 - functions disabled by "Administrator".

  Copy (and others) functions disabled with message "function disabled by any personal orthe who has set up the computer.  I did the reset from the software several times.  have done the "hard reset" (unplug, turn... etc).  Still have the problem.  Read the manual... No help.   This who should I try next.  Frustrated. .. .thanks

  Hello @pvc56, greetings!

  Thank you for visiting the Forums from the HP Support! I will do my best to help you with this problem.

  We will perform a factory reset on your printer to try to resolve the problem.

  I send you a private message with the steps to reset the printer. Please check the icon of the mailbox at the top right of this screen.

  Let me know how it goes. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Yoga 2 Pro - how to disable notifications from switch mode - for example mode "attempts", "tablet mode", etc.?

  Anyone know how to disable the notifications that appear in the upper right say you that you have just changed from one configuration to another - for example switch from the tent to the Tablet mode?

  It is not enough to uninstall the "Yoga Picks" modern application, you will need to uninstall the office by going to the desktop control panel > programs and features > uninstall a program > Yoga Picks > Uninstall.