Verkenner.exe: What is Verkenner.exe in the Windows Vista startup files?

Similar Questions

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie

• The Windows Vista startup disk crashes after the screen "loading files".

  I am trying to install Windows Vista on a new computer. The computer recognizes the boot disk and I can go beyond the "Loading files" screen, but when I get to the screen that looks like the standard login screen, the menu to install Windows never appears. The display will be just what it was. Any help would be appreciated.

  Hello Trey

  I suggest you see if there is an update of the bios for the motherboard. You can also check out the link below and see the suggestion given by Tim Quan.
  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

• Where is the 32-bit version of the Windows Vista Help files?

  where is the 32-bit version of this https://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143

  The x 86 is 32-bit. Terminological obsolescence that dates back to processor Intel 80386.

  http://en.Wikipedia.org/wiki/X86_architecture

• When you try to open a session message a userinit.exe (oxc0000005) on Windows Vista

  When you try to open a session in systems invites a userinit.exe (oxc0000005) on Windows Vista message and appears a black page, tried to work on safe mode and restart, but does not solve the problem and won't let me in in the operating system, please notify

  Startup Repair: frequently asked questions

  Here are answers to some common questions about startup repair.

  What is the Startup Repair?

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  If you experience problems when you attempt to run the Startup Repair tool, or if your computer does not have the Startup Repair, your computer manufacturer can have customized or replaced the tool. See the documentation provided with your computer or go to the manufacturer's Web site.

  How to use Startup Repair?

  Startup Repair is located on the System Recovery Options menu, which is on the Windows installation disc. Startup Repair can also be installed on your drive hard if your computer has preinstalled recovery options. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If you have a Windows installation disc:

  1. Insert the installation disc. If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  2. Restart your computer.

     Click the Start button, click the arrow next to the button lock and then click on restart.

  3. Choose your language settings, and then click Next.

  4. Click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. In the System Recovery Options menu, click Startup Repair.

  If your computer has preinstalled recovery options:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the Start button, click the arrow next to the button lock and then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER.

  4. Select a keyboard layout, and then click Next.

  5. Select a user name and password, and then click OK.

  6. In the System Recovery Options menu, click Startup Repair.

  Are there problems Startup Repair cannot fix?

  Startup Repair cannot fix hardware failures or certain types of virus attacks. It is not a backup tool, so it cannot help you recover personal files, such as photos or documents. To help protect your computer, back up your system and your files regularly. For more information, search for "backup" in Help and Support.

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information.

  See also

  • What to do if Windows does not start correctly
  • What is system restore?

  Also on the screen where you choose the Startup Repair, you can also choose command prompt. Type this (it's a single line)

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Userinit" / t Reg_Sz/d "c:\windows\system32\userinit.exe".

• After you reset the Windows Activation within 30 days what happened then? Reset the Windows Activation again?

  Original title:
  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you
  -----

  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you

  Activate Windows.

  Once actually activate you Windows with a product key legitimate - you should be * fact *.

• LogonUI.exe - bad Image (Windows Vista)

  When I turn on my Gateway laptop, I get a popup that says:

  C:/Windows/syatem32/Uxtheme.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact you system administrator or the provider of software for support.

  Whenever I log on my computer, all I get is a white screen and a few popups saying that Explorer Windows and Windows Calendar has stopped working. I can boot into safe mode and with command prompt, but I still have the same pop up windows. I also ran the repair of the boot, the same problem, and I DO NOT have a disk for Installation of Windows Vista. ALL SOLUTIONS?

  http://DLL.ParetoLogic.com/detail.php/UxTheme

  Above is what it is.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read the info above bridge of recovery to repair your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

  I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

  I was able to open using AbiWord, thanks for the reply

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• What services are added to the Windows system?

  After the installation of the Oracle coherence, configure members and the addition of the ReplicatedCaches on the Windows XP system, what services are added to the Windows system?
  
  Thank you

  None.

  Coherence as an application on Windows, not run as a Windows Service.

  Peace,

  Cameron Purdy | The Oracle coherence

• Download error - cannot download anything on the windows vista computer.

  When I try to download anything, it says that Windows cannot find 'C:\Users\Admin\Downloads\shockwave_Installer_Slim.exe '. Then he said, make sure you typed the name correctly and then try again. I hope you can help me.

  Original title: download error

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  It seems that you have problems with downloading files on the windows vista computer.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would appreciate if you can help me with the following information.

  1. what browser you use on the computer?

  2. What is the exact full error message?

  3. don't you make changes on the computer before this problem?

  4. deal with this problem if you try to download all files from online?

  If you do this in the face of Internet Explorer help, I suggest that you should change the default download location and check if it helps.

  Method 1

  In internet explorer, you can change the default location.

  Here's how:

  a. open internet explorer.

  b. click on Tools , then select view downloads.

  c. downloads for window, click Options.

  d. now, enter the default download location and click on the OK button.

  Turn on the computer at the beginning of boot and check if the problem persists.

  Method 2

  Perform a clean boot to see if no third-party service is causing the problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  For your reference:

  Windows Internet Explorer 9 Download Manager using

  http://Windows.Microsoft.com/en-in/Windows-Vista/using-download-manager-in-Internet-Explorer

  Response with more information to help you.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• How and what do I use to open Windows Vista Icons with?

  How and what do I use to open Windows Vista Icons with?

  Try this:

  Take a look at this tutorial: restore the file type associations
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions in #1 à #7 at the top.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions in #1 à #7 at the top.

• Can't unzip the files using the Windows Vista option extract all

  I tried to unzip the files, I have downloaded from the Web site by using the context menu "extract all... "on the file.  I have a Board error saying that the compressed (zipped) folder is empty.  If I try a double click on the file, I get the message that the zip file is not valid.  This has happened to every zip file I tried to unpack so far.  The only files I can unpack so far are those I zipped myself using the context menu "send to folder of Compssed of-->" of Windows Vista.  Any suggestions?

  Hi Eddie Hersh,.

  Thanks for choosing the Windows Vista Forum.

  1 how long have you had this problem?

  2. If it works well before?

  Make sure that the download of the file is not corrupted.

  You can perform the steps in the link below and check if it works.

  Restore and return the file Association in Windows Vista if Original

  1. click on start, and then type regedit in start search and press ENTER.

  2. navigate to the following registry branch:

  NtVersion ntVersion\Explorer\FileExts\ [ext]

  Replace the [exe] with the real extension of the file you want to restore the file type association to return to the default Windows Vista original. If you unsure, simply browse through all the Sub-touche under FileExts.

  3. delete the subkey named UserChoice.

  4. exit the registry editor.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  Compress and uncompress files (zip files) - http://windowshelp.microsoft.com/Windows/en-US/Help/7050d809-c761-43d4-aae7-587550cd341a1033.mspx

  Kind regards

  Marnie.

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.