version 24.6.0 installed last night - now I can't sign. no explanation.

This morning when I grew up Thunderbird, it wouldn't connect to the internet. I was able to get to my email via the web interface and my browsers are all working well. I discovered that night last version of Thunderbird installed 24.6.0 after I signed, so apparently it has something to do with the reason why I can't connect now. My husband is a computer geek and looked at everything and does not know why it does not work.

Advertisement

Please confirm that your antivirus software does not block Thunderbird. It must be on "allow".
I know that there were occasions when Thunderbird updates and anti-virus software think that it is a completely new program.

Tags: Thunderbird

Similar Questions

  • Vista update last night, now I can not even do Windows or restore from safe mode.

    I have a Vista 64 bit machine.

    Last night my computer needed to install updates before shutting down, so I left it (as usual). This morning, when I turn my computer on it is stuck in a cycle of perpetual start-up. It restarts, concludes windows, gets a blue screen of death, reboots, etc etc. I disabled automatic reboot, so I could find the error message. It is a stop error message: 0x0000007E. I tried the analysis, through the prompt, the EFA one. It found errors but it unable to fix/replace.
    I can run my machine in safe mode. But I am unable to run a system restore. Using the option on the start menu, it gives an error message. If I use the suggested path since I was able to get the system restore to start via the command prompt. I tried several dates for a restoration of the system (the only thing that has happened to my machine in weeks is the installation of the update of mystery last night and windows update). The system restore is unable to complete. It comes up with the following error message: 0 x 80070057.
    I ran AVG and Malwarebytes. According to the two, which are updated, I do not suffer from any virus, spyware or anything. Now the only option that works in safe mode. Everything that involves repairs or last config of success (from the option menu F8 when reboot) just does enter the loop.
    Whenever I do windows an option, ask questions about the parameters name, workgroup and starting up my computer. I don't know if this affects what it is.
    Thanks to all those who might have a tip or two to throw my way. I'm about to pull out my hair.

    Hello

    If you have connected an external equipment to the computer, and then try to disconnect all external devices and then tries to start and check if it helps.

    It will be useful.

  • updates installed last night, now get error message "error unexpected opening catalog."

    I pressed try again, NO chance, then choose a different catalog down, but again, not able to find a new/backup catalog... Help please

    Hello

    Uninstall the Lightroom and install again.

    Thank you

  • Windows update last night, now I can't use Format larger sizes to draw in Autocad using Adobe PDF

    Only small size formats are available... anyone know where I should look to see which file has changed now do not show ANSI and ARCH, etc. sheets of print in AutoCAD format?

    No Distiller Server? Please try Acrobat: forum creation & Editing. Give versions of Windows and Acrobat.

  • Updates last night - now Office 2007 missing?

    OK when I disconnected last night - he said I had 13 updates - so it installed updates and now I can not in Word, Excel PPoint
    I get an error saying "action is valid only for installed products.

    was working fine before the update and now nothing

    Help

    http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

    Groups discussion board link above.

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.officeupdate&lang=en&CR=us

    Group discussion updated Office.

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    See you soon.

    Mick Murphy - Microsoft partner

  • IE 9 beta was not installing properly and now I can't use IE at all... How can I remove this version and reinstall IE 8? I tried MS site not avail__

    IE 9 beta was not installing properly and now I can't use IE at all... How can I remove this version and reinstall IE 8?

    I tried the MS site, nothing helps.

    back to the restore point and still have problems.

    internet access through backdoors on the emails.

    How to uninstall IE9 Beta?
    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/7250c2d2-20e1-4F0A-8056-4a6abd9a0f9b

    If you still have questions, please ask the in Forum Internet Explorer
    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • No history except the 2 update, I installed last night. What is a registry error?.

    When I go to windows update it tells me that no update was already installed. The update history page is white, except for the 2 updates, I installed last night. Update said earlier I have all the updates that are installed and there is no new update. I went to the windows update log in windows system 32 file and it lists all of my updates to the current, but will not display the update on the page history. I have hundreds of updates in the win sys. 32 journal update. This me puzzled because I'm savy on most windows problems, or, at least so far, I was able to fix most of the windows over the years since 2007. Am running Win Vista Home Service Pak 2 and all the other stuff seems to be ok except windows update. No history except the 2 update, I installed last night. Microsoft security essentials courses and a fix windows 3.5 way way back.  What is a registry error?.

    Original title: update windows

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    that includes "0x8024402C".

  • Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this - > unfinished Validation: ActiveX error with error code [0 x 80080296] .__What can do? Thank you n God bless.

    Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this---> Validation incomplete: ActiveX error with error code [0 x 80080296].
    What can I do? Thank you n God bless.

    Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    What problems do you think that reinstalling Windows can solve?

    Did you do a repair installation, or you format and do a clean install?

    =================================

    Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

    If you were not able to validate, follow these steps:

    1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

    -Online Windows XP: double-click the executable file to run the tool.

    -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

    2. after running the tool, click the Windows tab, and then click the copy button (on the Clipboard).

    NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

    3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

    4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said bark 2 hours and 7 minutes since last night.  What can I do?

    I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said about '2 hours and 7 minutes' since last night.  What can I do?

    Try to turn off the computer with the power switch, and then restart.

  • I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

    I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

    See:

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning then you can confirm that you want to access this page.

  • My Apple Watch works fine, but now the time is 12 hours off - he thinks it's night now - how can I fix?

    My new Apple Watch works very well for several weeks, but today the time is 12 hours off - he thinks it's night now - how can I fix?

    HI -.

    Try the following steps:

    On your iPhone, go to: settings > General > Date time & - check that the value is automatically activated.

    Check that Bluetooth and Wi - Fi are activated on your iPhone:

    -Phone: Settings > Bluetooth - on.

    -Phone: Settings > Wi - Fi - on.

    Check that your iPhone and Apple Watch are connected:

    -When you show the time on your watch, drag upward on your watch dial > drag left / right for the look of settings > check it shows connected and shows a green phone icon. Disable airplane Mode if it is enabled.

    It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

  • Log on: installed automatically updated, now I can not even log on my laptop

    Installed, updated automatically, now I can not even connect on my laptop, password is justifiable, but I'm locked up. It says something about the user profile.

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have a win 7 dvd retail and I did clean install and says now I can't activate

    I have a win 7 dvd retail and I did clean install and says now I can not activate because I only have a dvd upgrade how do I clean win 7 off the coast to put xp on and do it all again

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  • Hi, my illustrator CS5 freezes at startup. It was working properly until last Friday, now I can't open it. can someone help me?

    Hi, my illustrator CS5 freezes at startup. It was working properly until last Friday, now I can't open it. can someone help me?

    Leo,

    You can try the list (5) being less likely).

    The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

    If possible / there is, you must record a current work first, of course.

    (1) close Illy and open again.

    (2) restart the computer (you can make up at least 5 times);

    (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

    4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

    https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

    5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

    Even worse, you can:

    (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

    http://www.Adobe.com/support/contact/cscleanertool.html

  • the computer in the format 2, re-installed Acrobat 10, now I can not activate

    the computer in the format 2, re-installed Acrobat 10, now I can not activate

    Why?

    If you have reached your activation limit, disable a previous installation.  If you can do it is more, contact adobe support to reset your counter of activation: www.adobe.com/support/chat/ivrchat.html

Maybe you are looking for

  • Why my address book has been altered in the new version 38?

    There were many double jobs with different addresses. Too many names of people I've never heard of. It took several hours to check and delete,

  • reset the counter of pfi

    I read an encoder signals of pulse with the CAI (meter high speed) of labview and NI USB Daq 6009. So I tried to do it the easiest way, I found, by using the labview "component" (I don't know the exact name) of the attached photo. I account the impul

  • Windows Update crashes trying to check the computer

    Windows XP Professional x 86 with all important updates Running as an administrator When I try to go to Windows Update, I get a message saying that an ActiveX control must be installed to save your computer.  (The machine worked for awhile and used W

  • Google partial sync

    I had my pixi for 3 weeks and still cannot get a full sync to google contacts. I really don't want to do a reset on the phone. Hardware palm pixi plus - version 1.1 Webos 1.3.5.1 software 153 contacts in my contacts on google - added by importing my

  • my computer has started and then came up with a checksum CMOS defaults loaded error message

    my computer started then showed the message CMOS checksum error defaults loaded What dose this mean and can it be fixed