Version labview6 MD5

Hello

I am lookiing for an algorithm MD5 function on an old
LabVIEW (6.1) machine.
I found in the examples of the forum a digest MD5 library
but it's for labview 7.
Please could someone convert to previous version?

I thank in advance
F


Tags: NI Software

Similar Questions

  • Malwarebytes crash showing MSVCR100.dll as the problem (logs attached events)

    work on a computer running windows 7 Home premium 64-bit, and according to the owner on the 16th malwarebytes began to break up the dialog box just says that the program had planted and windows must close, no information error or something. so I pulled the event logs and it shows MSVCR100.dll as the culprit, however. There are more than 30 different files with the same name. and most are in different program folders, malwarebytes is the version and MD5 info for anyone who is in my computer (I also use malwarebytes) I run a complete scan with TrendMicro housecall thinking it might be something hidden in there but he found nothing.  I tried to run the Chameleon of Malwarebytes, but when it launched the program it will fail the same way.  I have the event logs loaded on my skydrive http://1drv.ms/1lUZtLu I would appershate if someone could watch them over and see if I missed something.

    the steps I tried to correct the problem

    1. uninstalled and reinstalled the program
    2. full scan with TrendMicro Housecall (64-bit)
    3. system restore
    4. reinstalled the program
    5. taken from the installation of a known working installation directory

    My next recourse must have the operating system offline (using UBCD) and execution of an Analyzer of virus of rescue,.

    i have a new appointment with the customer on 19 for this.

    If anyone has any suggestions for this problem it would be great, I have not had this problem before.

    Thanks to all those who help.

    Dustin J.

    Log name: Application
    Source: SideBySide
    Date: 23/06/2014-07:29:07
    Event ID: 63
    Level: error
    Description:

    Activation context generation failed for "c:\program files (x 86) \spybot - research & destroy\DelZip179.dll. Manifest error or policy file "c:\program files (x 86) \spybot - search & destroy\DelZip179.dll" on line 8. The value ' * ' attribute 'language' in the "assemblyIdentity" element is invalid.

    Please refer to: http://community.spiceworks.com/windows_event/show/824-sidebyside-63

    Log name: Application
    Source: SideBySide
    Date: 2014/06/23 07:27:25
    Event ID: 33
    Level: error
    Description:
    Activation context generation failed for "c:\program files (x86)\emachines\registration\GREG.exe. Load Assembly Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.

    A complicated situation: http://blogs.msdn.com/b/dsvc/archive/2008/08/07/part-2-troubleshooting-vc-side-by-side-problems.aspx

  • I need to access older versions of FireFox and checksum for these files.

    For each version below, I need to download installation file and checksum md5/shaXXX of Mozilla for each download.

    WindowsOS: Firefox v3.5, v3.6

    Solaris 10 x 86: Firefox v3.5, v3.6

    Solaris sparc: v3.6.17 Firefox

                  filename: firefox-3.6.17.en-US.solaris-10-fcs-sparc-pkg
    

    All you want for current Firefox 3.6 is on the server FTP here:

    There are two large files for the MD5 and SHA1 sums everything. Solaris is under the dir. of contrib

    The current version of Firefox 3.x is 3.6.23. Firefox 3.5 is no longer supported and Firefox 3.6 is considered to be a direct update (aka minor update) to Firefox 3.5. When Firefox 3.5 users check the updates, they go directly to 3.6 for the security and stability fixes.

    If you really need an older version for testing purposes, you can get any version of Firefox that has ever existed of the FTP server:

  • Sha1sum/MD5 for test of Windows Server 2012 R2 Essentials

    I try to install the above https://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2-essentials version, file name

    9600.16384.WINBLUE_RTM.130821 - 1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5. ISO.

    When attatching the DVD in virtual box, I make mistakes (below for reference) but I can't seem to find a sha1sum or md5 of this file, anyone can provide one?

    VirtualBox errors:

    Unable to get the storage format of the middle ' / Users/rparks/Downloads/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5. ISO' (VERR_NOT_SUPPORTED).

    Result code:

    VBOX_E_IPRT_ERROR (0X80BB0005)

    Component:

    MediumWrap

    Interface:

    IMedium {4afe423b-43e0-e9d0-82e8-ceb307940dda}

    Called:

    IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945}

    Called RC:

    VBOX_E_OBJECT_NOT_FOUND (0X80BB0001)

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • The FCIV tool - > y at - it a database of reference available to an official MS online secure website where we could ask if a MD5 / SHA-1 hash is safe?

    Hello

    In other words...

    (1) this is the FCIV tool I'm talking

    http://support.Microsoft.com/kb/841290

    (2) I would like to know if there is a way to address the MD5/SHA-1 calculated hash and check if the value found is in line with official software developed by Microsoft...

    For example: if I run the FCIV tool with "c:\program files\windows media player\wmpnetwk.exe", I get MD5 and SHA-1 suite of values...

    //
    File Checksum Integrity Verifier version 2.05.
    //
    MD5                             SHA-1
    -------------------------------------------------------------------------
    a9f3bfc9345f49614d5859ec95b9e994 64638c3ff08eecd62e2b24708cf5b5f111c05e3d c:\program files\windows media player\wmpnetwk.exe

    Is it an online service available from MS that helps me to compare at least a pair of ' MD5/path' or 'SHA-1/Path', then to get a positive or negative test relating to this application.

    By good I mean, I can trust without doubt that it is a true software of MS and not a MALWARE software...

    Eager to hear feedback on this...

    Best regards.

    Hello

    The readme file contains more examples use fciv.exe, including using different algorithms and generate hash values for files of the entire tree.

    In the link your provided tools, he States:warning the Microsoft File Checksum Integrity check (FCIV) utility is an unsupported command-line utility that calculates the MD5 or SHA1 cryptographic hashes for files. Microsoft provides no support for this utility. Use this utility at your own risk. Product Support Services Microsoft (PSS) cannot answer the questions about the File Checksum Integrity Verifier utility."

    Try to repost your questions to the TechNet Forum for THIS professional assistance.

    How to use the Article on the utility

    http://www.ComputerWeekly.com/tip/how-to-use-the-Microsoft-FCIV-command-line-checksum-tool

    Good luck!

  • Windows 7 MD5 / Hash of SAHA-1

    I bought Windows 7 Home Premium of the offer of student offered by Microsoft; I already downloaded and such and I found a guide to create the files extracted to the .box file in an ISO and I obviously know its validity. But, I'm curious as to what that the hash MD5/SAHA-1 is for the Windows 7 Home Premium 32-bit (x 86) retail ISO, not the RTM ISO MSDN.

    I already know how to get the hash of the ISO bootable, I created the guide.

    Is the version of Windows, I bought and downloaded Windows 7 Home Premium 32 - bit (x 86) updated. I think it's the upgrade of retail.

    Hi all

    Thanks for posting. For more information on image of Digital River or how to get an image please contact them directly as they will be able to provide you with the information you need.

    https://Windows7.digitalriver.com/servlet/ControllerServlet?Action=DisplayContactFormPage&locale=en_US&siteid=mswpus

    I hope this helps!
    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Missing hash MD5 CUCM/CUC Upgrade OS on page

    I have been through several improvements CUCM and CUC but, at least one of them I noticed he had a hash MD5 Checksum of lack and white in CUCM BONES page just as I started the installation.

    I understand that if it does not match the checksum of when you downloaded from Cisco / PUT which is bad, but what happened when blank/lack just in the page of the OS?

    Thank you

    Dan

    Hi Dan,.

    If it is a upgrade file that has been downloaded from cisco.com you much download again trying to minimize the interference of the antivirus, vpn etc and see if the problem persists. I've seen a few cases of TAC where this scenario was known, but the upgrade went through and I don't see a bug for this as has been seen on different versions including 7.x. You can also open a TAC case to put the file published for you and try it.

    Manish

  • y at - it no changes on IPSEC command in version 15.4?

    Hello

    I am beginner engineer.

    I must be upgraded to version IOS Version 12.4 (13r) T to 15.4

    But I want to know the difference between the two versions on IPSEC command.

    Thank you.

    It is a command in use.

    crypto ISAKMP policy 10
    BA 3des
    md5 hash
    preshared authentication
    Group 2
    address of this key crypto isakmp 172.1.1.1 friend
    ISAKMP crypto keepalive 10
    !
    !
    Crypto ipsec transform-set esp-3des esp-sha-hmac friend_ts
    !
    nice_IPSec 10 ipsec-isakmp crypto map
    defined peer 172.1.1.1
    Set transform-set friend_ts
    match nice address

    Hi wnsrud0179,

    I tried the commands on my router running 15.4 (1) and each of them have been accepted without problem.

    It may be useful

    -Randy-

  • Road by default from version 6.3 PIX IPsec tunnel

    We have a PIX 501 running IOS version 6.3.1.

    There are currently 3 tunnels IPsec active as described below.

    What we would like is to have all traffic by default (0.0.0.0 0.0.0.0) range out through the tunnel of the middle line so that traffic can be protected by a firewall on the other side of the tunnel.  Since ICF is a Sonicwall what would be needed to be changed in the configuration on the PIX to get there?

    Thank you

    6.3 (1) version PIX

    interface ethernet0 10baset

    interface ethernet1 100full

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate the 86AZXXmRLxfv/oUQ encrypted password

    86AZXXmRLxfv/oUQ encrypted passwd

    Site A hostname

    domain default.int

    clock timezone STD - 7

    fixup protocol dns-length maximum 512

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    fixup protocol they 389

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol tftp 69

    names of

    name 75.75.75.2 CovadHub

    name 75.48.25.12 Sonicwall

    access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.1.0 255.255.255.0

    access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.2.0 255.255.255.0

    access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.3.0 255.255.255.0

    access-list 101 permit icmp any any echo response

    access-list 101 permit icmp any any echo

    access-list 102 permit ip 10.10.5.0 255.255.255.0 10.10.2.0 255.255.255.0

    access-list 103 allow ip 10.10.5.0 255.255.255.0 10.10.1.0 255.255.255.0

    access-list 104. allow ip 10.10.5.0 255.255.255.0 10.10.3.0 255.255.255.0

    pager lines 24

    opening of session

    monitor debug logging

    logging warnings put in buffered memory

    ICMP allow 10.10.5.0 255.255.255.0 inside

    Outside 1500 MTU

    Within 1500 MTU

    external IP 75.25.14.2 255.255.255.0

    IP address inside 10.10.5.1 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    location of PDM 10.10.5.0 255.255.255.0 inside

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    (Inside) NAT 0-list of access 101

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    allow icmp a conduit

    Route outside 0.0.0.0 0.0.0.0 75.25.14.1 1

    Timeout xlate 0:05:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    NTP server 132.163.4.102 source outdoors

    NTP server 129.7.1.66 source outdoors

    Enable http server

    http 10.10.1.0 255.255.255.0 inside

    http 10.10.5.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set esp - esp-md5-hmac pix11

    peer11 card crypto ipsec-isakmp 10

    correspondence address 10 card crypto peer11 102

    peer11 card crypto 10 peers set 75.95.21.41

    peer11 card crypto 10 set transform-set pix11

    11 peer11 of ipsec-isakmp crypto map

    correspondence address 11 card crypto peer11 103

    11 peer11 peer Sonicwall crypto card game

    card crypto peer11 11 set transform-set pix11

    12 peer11 of ipsec-isakmp crypto map

    correspondence address 12 card crypto peer11 104

    card crypto peer11 12 set peer 75.62.58.28

    card crypto peer11 12 set transform-set pix11

    peer11 interface card crypto outside

    ISAKMP allows outside

    ISAKMP key * address 75.62.58.28 netmask 255.255.255.240

    ISAKMP key * address netmask 255.255.255.224 Sonicwall

    ISAKMP key * address 75.95.21.41 netmask 255.255.255.252

    ISAKMP identity address

    ISAKMP keepalive 10

    ISAKMP nat-traversal 20

    part of pre authentication ISAKMP policy 10

    encryption of ISAKMP policy 10

    ISAKMP policy 10 md5 hash

    10 2 ISAKMP policy group

    ISAKMP life duration strategy 10 86400

    part of pre authentication ISAKMP policy 11

    encryption of ISAKMP policy 11

    ISAKMP policy 11 md5 hash

    11 2 ISAKMP policy group

    ISAKMP duration strategy of life 11 28800

    part of pre authentication ISAKMP policy 12

    encryption of ISAKMP policy 12

    ISAKMP policy 12 md5 hash

    12 2 ISAKMP policy group

    ISAKMP duration strategy of life 12 36000

    Telnet 10.10.5.0 255.255.255.0 inside

    Telnet 0.0.0.0 0.0.0.0 inside

    Telnet timeout 5

    SSH 0.0.0.0 0.0.0.0 outdoors

    SSH 0.0.0.0 0.0.0.0 inside

    SSH timeout 60

    Console timeout 0

    dhcpd address 10.10.5.70 - 10.10.5.101 inside

    dhcpd dns 10.10.1.214

    dhcpd rental 43200

    dhcpd ping_timeout 750

    dhcpd field default.int

    dhcpd outside auto_config

    dhcpd allow inside

    Terminal width 80

    Cryptochecksum:36d2c26afa8

    03957d 3659

    868d9219f8

    2

    : end

    Hello

    You do not configure really any type of default route for the VPN L2L. You match rather traffic with 'everything' destination on configuring VPN L2L. Basically you would like to configure the VPN L2L ACL encryption with the 'whole' destination map

    I guess in your case it would be the ACL named "103".

    access-list 103 allow ip 10.10.5.0 255.255.255.0 any

    IP 10.10.5.0 doesn't allow any access list 103 255.255.255.0 10.10.1.0 255.255.255.0

    Naturally, your NAT0 ACL configuration should also reflect this change. I guess the end remote Sonicwall'd private NAT to public Internet access in this case whereas. I guess that in this case, the ACL NAT0 might even be just this one rule ACL

    access-list 101 permit ip 10.10.5.0 255.255.255.0 any

    BUT what I was asking however for now mainly is the fact it has a priority of '11' in the 'crypto map' which has between 2 other L2L VPN connections.

    peer11 card crypto ipsec-isakmp 10

    correspondence address 10 card crypto peer11 102

    peer11 card crypto 10 peers set 75.95.21.41

    peer11 card crypto 10 set transform-set pix11

    11 peer11 of ipsec-isakmp crypto map

    correspondence address 11 card crypto peer11 103

    11 peer11 peer Sonicwall crypto card game

    card crypto peer11 11 set transform-set pix11

    12 peer11 of ipsec-isakmp crypto map

    correspondence address 12 card crypto peer11 104

    card crypto peer11 12 set peer 75.62.58.28

    card crypto peer11 12 set transform-set pix11

    If you have changed the destination address of '103' crypto VPN L2L ACL at "" I guess that would probably cause so that the last connection VPN L2L with "12" priority may stop working since the previous connection already corresponds to 'all' your network 'inside' destination address.

    The solution might be to delete the current configuration of the '11' priority and add it with '13' for example, so that the other 2 connections VPN L2L could continue to work and all the rest of the traffic would be passed to the connection VPN L2L with Sonicwall as the remote peer.

    No crypto map ipsec-isakmp 11 peer11

    no correspondence address 11 card crypto peer11 103

    no set of 11 peer11 card crypto don't peer Sonicwall

    No peer11 11 set transform-set pix11 crypto card

    13 peer11 of ipsec-isakmp crypto map

    correspondence address 13 card crypto peer11 103

    13 card crypto peer Sonicwall peer11 game

    card crypto peer11 13 pix11 transform-set game

    I have to say that this is how I expect it should work. I worked with VPN L2L that have been configured in this way but its quite rare.

    If you want to try something like that, of course, be ready to return to the old configuration with your admins of the remote peer, if things do not work. I guess more difficult configurations changes must be made on the remote end while your configuration of the ends should be fairly simple.

    Hope this helps

    -Jouni

  • MD5 error during installation

    I recently updated my music notation software Finale of the 2011 version of the new version of 2014.

    I completely uninstalled the old version (on the recommendation of officials of the software), but continue to run into a problem when I try to install the new version.  Everything's fine until it comes to install the different sounds of instruments.  Subject to Midway through the process, I get this error message:

    "Two posterior MD5 controls on _ provided the same bad result.  Set samples installed is corrupt.  Please reinstall.  Installation canceled. »

    I have now tried six times make this facility, but get the same result every time.  And the files on which the MD5 verification failed (represented by underscore above) is different in each Setup attempt.

    I worked on this problem for about two weeks now with the creators of the software, and they have more suggestions.  So, my hopes are pinned on you gurus on this web site.

    Any ideas?

    The file you are trying to install is damaged, try to download the software again and check.

  • Hash MD5 for PIX515 IOS does not match check

    I've recently updated our firewall PIX515 release 7.2.2 to 7.2.4 and I wanted to check the hash MD5 for the downloaded IOS. However the hash generated on the PIX using the verify command does not match the hash that is published on the website of download of cisco. Published f2f6b88ea1b4a0b33045b3b18d0fb852, generated hash hash is fdcd... I checked the MD5 7.2.2 on a firewall, I have not yet updated and does not correspond to either. Am I missing something?

    OK, so you've downloaded an intermediate version - 7.2.4 (30), instead of the main exit of 7.2.4.

    7.2.4 checksum (30) is correct and corresponds to which advised you earlier: fdcd3a9d884baf0ec0aad78048f0e441

    You can check it out here:

    http://www.Cisco.com/cgi-bin/software/tablebuild/doftp.pl?ftpfile=Cisco/internal/special/ciscosecure/PIX/pix724-30.bin&app=tablebuild&status=showC2A

    Hope that clarifies the confusion.

  • ASA Version 9.0 (1) - Ping works both inside and outside, WWW does not work for remote VPN

    I am at a loss, I can connect VIA VPN and Ping inside the IPs (192.168.1.2) and outside (4.2.2.2) IPs of the remote VPN client, but can't surf WWW. Inside the network, all users have WWW access and the network is fine. I'm new on the revisions to ver 8.3 and don't see what I'm missing?

    Info:

    ASA-A # sh xl
    in use, the most used 12 4
    Flags: D - DNS, e - extended, I - identity, i - dynamics, r - portmap,
    s - static, T - twice, N - net-to-net
    NAT inside:192.168.1.0/24 to outside:24.180.x.x/24
    flags s idle 0:10:46 timeout 0:00:00
    NAT outside:192.168.2.0/24 to outside:24.180.x./24
    flags s idle 0:00:59 timeout 0:00:00
    NAT inside:192.168.1.0/24 to any:192.168.1.0/24
    sitting inactive flags 0:11:51 timeout 0:00:00
    NAT any:192.168.2.0/24 to inside:192.168.2.0/24
    sitting inactive flags 0:11:51 timeout 0:00:00
    ASA-A #.

    ASA-A # sh nat
    Manual NAT policies (Section 1)
    1 (inside) to destination of (all) Inside_Net Inside_Net the VPN-NET VPN static static
    translate_hits = 3, untranslate_hits = 3

    Auto NAT policies (Section 2)
    1 (inside) (outside) static source Inside_Net 24.180.x.x
    translate_hits = 3, untranslate_hits = 184
    2 (outdoor) (outdoor) static source VPN-net 24.180.x.x
    translate_hits 97, untranslate_hits = 91 =
    ASA-A #.

    Journal of the Sho:

    % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
    % ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00
    % ASA-609001 7: built outside local host: 192.168.2.255

    % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
    % ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00

    Current config:

    ASA Version 9.0 (1)
    !
    ASA-A host name
    domain a.local
    enable the encrypted password xxxxx
    XXXXX encrypted passwd
    names of
    IP local pool vpnpool 192.168.2.10 - 192.168.2.20
    !
    interface Ethernet0/0
    Inet connection description
    switchport access vlan 2
    !
    interface Ethernet0/1
    LAN connection description
    switchport access vlan 3
    !
    interface Ethernet0/2
    switchport access vlan 3
    !
    interface Ethernet0/3
    switchport access vlan 3
    !
    interface Ethernet0/4
    switchport access vlan 3
    !
    interface Ethernet0/5
    switchport access vlan 3
    !
    interface Ethernet0/6
    switchport access vlan 3
    !
    interface Ethernet0/7
    switchport access vlan 3
    !
    interface Vlan1
    No nameif
    no level of security
    no ip address
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP address 24.180.x.x 255.255.255.248
    !
    interface Vlan3
    nameif inside
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    banner exec   ********************************************
    banner exec   *                                          *
    exec banner * ASA-A *.
    banner exec   *                                          *
    exec banner * CISCO ASA5505 *.
    banner exec   *                                          *
    exec banner * A Services Inc.              *
    exec banner * xxx in car Street N. *.
    exec banner * city, ST # *.
    banner exec   *                                          *
    banner exec   ********************************************
    exec banner ^
    passive FTP mode
    DNS server-group DefaultDNS
    domain a.local
    permit same-security-traffic intra-interface
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    network of the Inside_Net object
    subnet 192.168.1.0 255.255.255.0
    network of the VPN-net object
    Subnet 192.168.2.0 255.255.255.0
    access-list extended sheep permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
    allowed incoming access extended gre a whole list
    inbound udp allowed extended access list any host 24.180.x.x eq 1723
    list of allowed inbound tcp extended access any host 24.180.x.x eq pptp
    list of allowed inbound tcp extended access any host 24.180.x.x eq smtp
    list of allowed inbound tcp extended access any host 24.180.x.x eq www
    list of allowed inbound tcp extended access any host 24.180.x.x eq https
    list of allowed inbound tcp extended access any host 24.180.x.x eq 987
    inbound udp allowed extended access list any host 24.180.x.x eq 25
    inbound udp allowed extended access list any host 24.180.x.x eq 443
    inbound udp allowed extended access list any host 24.180.x.x eq www
    inbound udp allowed extended access list any host 24.180.x.x eq 987
    pager lines 24
    Enable logging
    debug logging in buffered memory
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    ICMP unreachable rate-limit 1 burst-size 1
    ICMP allow all outside
    ICMP allow any inside
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    public static Inside_Net Inside_Net destination NAT (inside, all) static source VPN-NET VPN
    !
    network of the Inside_Net object
    NAT static 24.180.x.x (indoor, outdoor)
    network of the VPN-net object
    24.180.x.x static NAT (outdoors, outdoor)
    Access-group interface incoming outside
    Route outside 0.0.0.0 0.0.0.0 24.180.x.x 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    Enable http server
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
    Crypto ipsec transform-set ikev1 VPN remote esp-3des esp-md5-hmac
    Crypto ipsec ikev2 VPN ipsec-proposal-remotetest
    Protocol esp encryption aes - 256, aes - 192, aes, 3des and
    Esp integrity sha-1 protocol
    Crypto ipsec pmtu aging infinite - the security association
    Crypto-map dynamic dyn1 1jeu ikev1 transform-set remote VPN
    Crypto-map dynamic dyn1 1jeu reverse-road
    map VPN - map 1-isakmp ipsec crypto dynamic dyn1
    VPN-card interface card crypto outside
    Crypto ca trustpoint _SmartCallHome_ServerCA
    Configure CRL
    trustpool crypto ca policy
    Crypto ca certificate chain _SmartCallHome_ServerCA
    certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
    010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
    30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
    0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
    65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
    68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
    302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
    63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
    010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
    082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
    ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
    45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
    1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
    6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
    445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
    1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
    2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
    quit smoking
    Crypto ikev1 allow outside
    IKEv1 crypto policy 1
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 43200
    Telnet timeout 5
    SSH timeout 5
    Console timeout 0

    dhcpd outside auto_config
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    user name UName encrypted password privilege 15 xxxxxxxxx
    type tunnel-group remote VPN remote access
    attributes global-tunnel-group VPN-remote controls
    address vpnpool pool
    tunnel-group, ipsec VPN-remote controls-attributes
    IKEv1 pre-shared-key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect the icmp
    !
    global service-policy global_policy
    context of prompt hostname
    anonymous reporting remote call
    Cryptochecksum:43db9ab2d3427289fb9a0fdb22b551fa
    : end

    Hello

    Its propably because you do not have a DNS server configured for VPN users. Try this command:

     group-policy DfltGrpPolicy attributes dns-server value 8.8.8.8

  • Site to site VPN upward but not pass traffic (ASA 5505 8.3.1 and 9.2.3 version)

    Hello

    I'll put up a tunnel vpn site-to-site between two locations.  Both have cisco ASA 5505 running a different version, I'll explain in more detail below.  so far, I was able to get the tunnel to come but I can't seem to pass traffic, I work at this for days now and have not been able to understand why he will not pass traffic.  Needless to say that the customer's PO would be on the fact that their VPN is not upward and they had to do by hand.  I'll put the configs below, if possible can someone help me as soon as POSSIBLE, I really want to get this site up and running so that we do not lose the customer.

    An IP address of 0.0.0.0 = site
    Site B IP = 1.1.1.1

    A Version of the site = 8.3.1
    Version of the site B = 9.2.3

    __________________________

    _________

    A RACE OF THE SITE CONFIGURATION

    Output of the command: "sh run".

    : Saved
    :
    ASA Version 8.3 (1)
    !
    hostname SDMCLNASA01
    SDMCLNASA01 domain name. LOCAL
    Select 5E8js/Fs7qxjxWdp of encrypted password
    2KFQnbNIdI.2KYOU encrypted passwd
    names of
    !
    interface Vlan1
    nameif inside
    security-level 100
    the IP 192.168.0.1 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    the IP 0.0.0.0 255.255.255.252
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    passive FTP mode
    clock timezone CST - 6
    clock to summer time recurring CDT
    DNS lookup field inside
    DNS domain-lookup outside
    DNS server-group DefaultDNS
    SDMCLNASA01 domain name. LOCAL
    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface
    network of the NETWORK_OBJ_192.168.0.0_24 object
    192.168.0.0 subnet 255.255.255.0
    network of the NETWORK_OBJ_192.168.1.0_24 object
    subnet 192.168.1.0 255.255.255.0
    network lan_internal object
    192.168.0.0 subnet 255.255.255.0
    purpose of the smtp network
    Home 192.168.0.245
    Network http object
    Home 192.168.0.245
    rdp network object
    Home 192.168.0.245
    network ssl object
    Home 192.168.0.245
    network camera_1 object
    host 192.168.0.13
    network camerahttp object
    host 192.168.0.13
    service object 8081
    source eq 8081 destination eq 8081 tcp service
    Dvr description
    network camera-http object
    host 192.168.0.13
    network dvr-http object
    host 192.168.0.13
    network dvr-mediaport object
    host 192.168.0.13
    object-group Protocol DM_INLINE_PROTOCOL_1
    object-protocol udp
    object-tcp protocol
    object-group Protocol TCPUDP
    object-protocol udp
    object-tcp protocol
    DM_INLINE_TCP_1 tcp service object-group
    EQ port 3389 object
    port-object eq www
    EQ object of the https port
    EQ smtp port object
    DM_INLINE_TCP_2 tcp service object-group
    port-object eq 34567
    port-object eq 34599
    EQ port 8081 object
    permit access ip 192.168.0.0 scope list outside_1_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
    outside_access_in list extended access permit tcp any any eq smtp
    outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
    outside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
    permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    ICMP unreachable rate-limit 1 burst-size 1
    ICMP allow any inside
    ICMP allow all outside
    don't allow no asdm history
    ARP timeout 14400
    NAT (inside, outside) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
    NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
    !


    network lan_internal object
    NAT dynamic interface (indoor, outdoor)
    purpose of the smtp network
    NAT (all, outside) interface static tcp smtp smtp service
    Network http object
    NAT (all, outside) interface static tcp www www service
    rdp network object
    NAT (all, outside) interface static service tcp 3389 3389
    network ssl object
    NAT (all, outside) interface static tcp https https service
    network dvr-http object
    NAT (all, outside) interface static 8081 8081 tcp service
    network dvr-mediaport object
    NAT (all, outside) interface static 34567 34567 tcp service
    Access-group outside_access_in in interface outside
    Route outside 0.0.0.0 0.0.0.0 71.42.194.209 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    http server enable 8080
    http 192.168.0.0 255.255.255.0 inside
    http 192.168.1.0 255.255.255.0 inside
    http 192.168.1.0 255.255.255.0 outside
    http 71.40.221.136 255.255.255.252 inside
    http 71.40.221.136 255.255.255.252 outside
    http 192.168.0.0 255.255.255.0 outside
    http 97.79.197.42 255.255.255.255 inside
    http 97.79.197.42 255.255.255.255 outside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    card crypto outside_map 1 match address outside_1_cryptomap
    card crypto outside_map 1 set peer 1.1.1.1
    card crypto outside_map 1 set of transformation-ESP-3DES-SHA
    outside_map interface card crypto outside
    crypto isakmp identity address
    crypto ISAKMP allow outside
    crypto ISAKMP policy 65535
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH timeout 5
    Console timeout 0
    dhcpd address 192.168.0.50 - 192.168.0.150 inside
    dhcpd dns 192.168.0.245 209.18.47.62 interface inside
    dhcpd SDMCLNASA01 field. LOCAL inside interface
    dhcpd allow inside
    !

    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    WebVPN
    attributes of Group Policy DfltGrpPolicy
    Protocol-tunnel-VPN IPSec l2tp ipsec
    tunnel-group 1.1.1.1 type ipsec-l2l
    tunnel-group 1.1.1.1 ipsec-attributes
    pre-shared key *.
    !
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    !
    context of prompt hostname
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:462428c25e9748896e98863f2d8aeee7
    : end

    ________________________________

    SITE B RUNNING CONFIG

    Output of the command: "sh run".

    : Saved
    :
    : Serial number: JMX1635Z1BV
    : Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
    :
    ASA Version 9.2 (3)
    !
    ciscoasa hostname
    activate qddbwnZVxqYXToV9 encrypted password
    volatile xlate deny tcp any4 any4
    volatile xlate deny tcp any4 any6
    volatile xlate deny tcp any6 any4
    volatile xlate deny tcp any6 any6
    volatile xlate deny udp any4 any4 eq field
    volatile xlate deny udp any4 any6 eq field
    volatile xlate deny udp any6 any4 eq field
    volatile xlate deny udp any6 any6 eq field
    names of
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP 1.1.1.1 255.255.255.252
    !
    passive FTP mode
    clock timezone CST - 6
    clock to summer time recurring CDT
    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface
    network camera_http object
    host 192.168.1.13
    network camera_media object
    host 192.168.1.13
    network of the NETWORK_OBJ_192.168.0.0_24 object
    192.168.0.0 subnet 255.255.255.0
    network of the NETWORK_OBJ_192.168.1.0_24 object
    subnet 192.168.1.0 255.255.255.0
    outside_access_in list extended access permit tcp any any eq 9000
    outside_access_in list extended access permit tcp any any eq www
    outside_access_in list extended access permit icmp any one
    outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object NETWORK_OBJ_192.168.0.0_24
    pager lines 24
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    ICMP allow any inside
    ICMP allow all outside
    ASDM image disk0: / asdm - 732.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (inside, outside) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
    NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
    !
    network camera_http object
    NAT (all, outside) interface static tcp www www service
    network camera_media object
    NAT (all, outside) interface static 9000 9000 tcp service
    !
    NAT source auto after (indoor, outdoor) dynamic one interface
    Access-group outside_access_in in interface outside
    Route outside 0.0.0.0 0.0.0.0 71.40.221.137 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    Enable http server
    http 192.168.1.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal OF
    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    card crypto outside_map 1 match address outside_cryptomap
    card crypto outside_map 1 peer set 0.0.0.0
    card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
    outside_map interface card crypto outside
    trustpool crypto ca policy
    IKEv2 crypto policy 1
    aes-256 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 10
    aes-192 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 30
    3des encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 40
    the Encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    Crypto ikev1 allow outside
    IKEv1 crypto policy 120
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH stricthostkeycheck
    SSH timeout 5
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0

    dhcpd address 192.168.1.50 - 192.168.1.150 inside
    dhcpd dns 192.168.0.245 209.18.47.61 interface inside
    dhcpd SDPHARR field. LOCAL inside interface
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    WebVPN
    AnyConnect essentials
    attributes of Group Policy DfltGrpPolicy
    Ikev1 VPN-tunnel-Protocol
    internal GroupPolicy_0.0.0.0 group strategy
    attributes of Group Policy GroupPolicy_0.0.0.0
    VPN-tunnel-Protocol ikev1, ikev2
    tunnel-group 0.0.0.0 type ipsec-l2l
    tunnel-group 0.0.0.0 ipsec-attributes
    IKEv1 pre-shared-key *.
    remote control-IKEv2 pre-shared-key authentication *.
    pre-shared-key authentication local IKEv2 *.
    !
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    !
    context of prompt hostname
    no remote anonymous reporting call
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:19031ab1e3bae21d7cc8319fb7ecf0eb
    : end

    Sorry my mistake.

    Delete this if it's still there

    card crypto external_map 1 the value reverse-road

    Add this to both sides

    card crypto outside_map 1 the value reverse-road

    Sorry about that.

    Mike

  • Sensor not known version of the IDS MC

    The system IDS 4215 sensor is version: 1.0000 S47. The MC of the IDS (version 1.2) does not have this version and recommends an update of the signature.

    I downloaded the file IDS-K9-min-4.1-1-S47.rpm.pkg to the web site of Cisco and attempt to update the signature in accordance with the instructions in the ReadMe file.

    I received the following message:

    "Failed to update the object. The provided update package seems to be corrupted, or refused permission to read the file. Please check the contents of the update package and try the operation again. »

    I checked the downloaded file's MD5 signature, and it's OK. I tried to download the file again and I got truncated versions (size about 256 KB).

    I use the correct file? How can I get the correct version of the file? Am I missing any parameter?

    Thank you for your help.

    What you have is the package of real update to the sensor itself. If you use MC to push updates, you need the package from the following location:

    http://www.cisco.com/cgi-bin/Software/Tablebuild/doftp.pl?ftpfile=cisco/crypto/3DES/cw2000/mgmt-ctr/ids/ids4updates/IDS-K9-min-4.1-1-S47.zip&swtype=FCS&software_products_url=%2Fcgi-bin%2Ftablebuild.pl%2Fmgmt-ctr-ids-ids4updates&isChild=&appName=&tbtype=mgmt-ctr-ids-ids4updates

    It contains the files needed for the update of MC and the real update package will be pushed to the sensor.

  • SHA version supported on Cisco IOS

    Guys,

    What is the SHA version that we support on the devices that support VPN from Cisco IOS? Just configuration options tell SHA...

    I do apreciate if you could point me to a cisco document to support your theory because client would require...

    Thanks in advance.

    hash (IKE policy)

    To specify the hashing algorithm in a policy of Internet Key Exchange, use the command hash policy Internet Security Association Key Management Protocol (ISAKMP) configuration mode. IKE policy define a set of parameters to use when the IKE negotiation. To reset the hash algorithm for the algorithm of hash-1 defaultsecure hash algorithm (SHA), don't use No form of this command.

    hash {sha | SHA256 . SHA384 | md5}

    no hash

    Description of the syntax

    SHA

    Specifies the hash algorithm SHA-1 (HMAC variant).

    SHA256

    Specifies the family of SHA-2 256 bits (HMAC variant) as the hashing algorithm.

    SHA384

    Specifies the family of SHA-2 384 bits (HMAC variant) as the hashing algorithm.

    MD5

    Specifies the MD5 (HMAC variant) as the hashing algorithm.

    Default values

    The SHA-1 hashing algorithm

    Control modes

    The ISAKMP policy configuration

    Order history

    Release
    Change

    11.3 T

    This command was introduced.

    12.4 (4) T

    IPv6 support has been added.

    12.2 (33) SRA

    This command was integrated into Cisco IOS version 12. (33) SRA.

    12.2SX

    This command is supported in the Cisco IOS release 12.2SX train. Support in a specific 12.2SX release this train is dependent on your hardware platform game and platform functionality.

    Cisco IOS XE version 2.1

    This command was introduced on the ASR 1000 series Cisco routers.

    15.1 (2) T

    This command was modified. Sha256 , sha384 , and keywords have been added.

    Of course, depends a bit on your IOS.
    HTH,
    Ian

Maybe you are looking for