version of runtime common language 4.0.30319.0.
Hello
You try to run the Dell Diagnostic module, but it asks that the Common Language Runtime from Microsoft version 4.0.30319.0. should be in place.
Cannot find all versions.
Thank you
Tom
PS I am unsure of the category Forum and the correct Windows topic, but the Windows version is correct.
Hi Tom,
According to the runtime error that you display, it's .NET 4.0 problem, make sure that the computer of the user/client have .net installed 4.0
Please install from the link:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851
For more information:
http://msdn.Microsoft.com/en-us/library/ddk909ch (v = vs. 71) .aspx
Let us know if you have other questions about Windows in the future.
Tags: Windows
Similar Questions
-
Common Language Runtime Debugging Services
I get the fatal execution engine errors.
onfserv.exe - Common Language Runtime Debugging Services
McafeeDataBackup.exe - Common Language Runtime Debugging Services
MSI189. Temp - Common Language Runtime Debugging Services
MSIEF.temp - Common Language Runtime Debugging Services
What is the cause and how can I solve this problem.
It could be a virus, try to scan your computer with other antivirus software you have now installed. If this isn't the problem check the chipset drivers and all windows updates. Cheers and post back if none have worked!
Post edited by: daniel.micu
-
Just Sony Vegas Movie Studio 9.0. "I could download and register successfully, but whenever I try to open it, the yellow triangle with an exclamation point appears saying:" an error occurred from Vegas Movie Studio. An internal error happened in the Common Language Runtime to run engine. "So I click on details and it says failed to initialize script host. I don't know what that means. What can I do to make it work?
Too bad. I got out my computer and it is now successfully in collaboration.
-
ehExtHost.exe Service error Common Language Runtime Debugging
At the opening of Media Center (2005, Windows XP) I get this error message.
ehExtHost.exe Service Common Language Runtime Debugging
Request a generetaed an exception that could not be treated.
(Process Id =) x 1648 (5704), Thread id =) x 490 (1168).
I click on the option not (not the debug option) and the message disappears, seams to work OK, but I always get this message when I open the Media Center.
Any help is appreciated.
Hi TrevorGeddis,
This can be caused by a corrupt installation of the .NET Framework. Follow the steps in the article to uninstall and reinstall.
Install the .NET Framework fails and requires manual removal
-
I run a HP Scanjet 4890 scanner with my setup. I use the software partner HP (HP solutions Center documents Viewer) with my scanner.
I get a window called HPQTHB08.exe - Common Language Runtime Debugging Services, the Application has generated an exception that could not be treated, process ID = 0x6b0 (1712), thread ID = 0x6c0 (1728), click OK to close the application, click on CANCEL to debug the application.
What is c?
I tried to click on the two, and I get a message saying that a registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0 x 2 (2). Please check computer settings cordbg.exe! a 0x6b0.
I am curious to know which in HP cela and how can I get it resolved.
I uninstalled Photosmart first 6.5 as you say, then I looked in program files / HP / Digital Imaging / bin. The HPQTHB08 .exe file wasn't there. I rechecked and after determining and confirming that the hpqthb08 was not there, I tried the HP solution center software to see if my scanner worked. He did it, thank you.
-
MemeoLauncher.exe - Common Language Runtime Debugging Services error
Error occur every time you start. Can not find a solution. I have a XP system with all patches installed. Thank you!
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=trueMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
To insert a text entry on the Common Language RunTime programmatically
Scenario is,
I want to add a text on my page programmatically. That is to say when I press the button or press on enter into a text input, it automatically inserts the Code below in the Page Source File (XML file)
< h:inputText id = "it6" style = "height: 15px;" Width: 40px; "/ >
This code is generated when we add the HTML page JSPX type input text.
How can I generate this code or insert text of entry program? Thanks in advance
You can create and add components to the page when running, but it is not part of the xml source jspx, it will appear on the page, and you can create binding and validator for this according to your requirement
Check this blog post -http://www.awasthiashish.com/2013/08/creating-dynamic-layout-form-and-ui.html
Hope this will help you
Ashish
-
NationalInstruments. version of the common dll 8.7.35.131
Hello
I'm using Visual Studio 2010, and I try to access ports digial on my NI USB-6210.
below I have c# code. Try to access the data acquisition. It's simple, but I can't use any device OR because of the dll I have.
I have the 9.0.35.6 version that I think that it works with previous versions for capatibility backward.
When I Isaiah to compile the program, it gives me this error.
Error 2 the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 8.7.35.131, Culture = neutral, PublicKeyToken = 18cbae0f9955702a "."
I don't know if I need a dll different reference or if there is something wrong with the dll.
Thank you.
using
{
(Task TRD = new Task()) //Task TRD = new Task();
find the right port and use the first value by default. DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.DIPort, PhysicalChannelAccess.External) [0];
DRT. () DIChannels.CreateChannel
"port0."
ChannelLineGrouping.OneChannelForAllLines);
DigitalSingleChannelReader reader = new DigitalSingleChannelReader (TDD. Stream);
int = reader data. ReadSingleSamplePortInt32();
Looks like you need to add a reference to the DAQmx driver. Here is another forum that deals with this. http://forums.NI.com/T5/Multifunction-DAQ/DAQmx-API-Reference-Visual-Studio-2010-Windows-7/TD-p/1408...
-
Get error message what to do?
INFO PLATFORMVERSIE
Windows: 10.0.10586.0 (Win32NT)
Common Language Runtime: 4.0.30319.42000
System.Deployment.dll: 4.6.1078.0 built by: NETFXREL3STAGE
CLR.dll: 4.6.1080.0 built by: NETFXREL3STAGE
dfdll.dll: 4.6.1038.0 built by: NETFXREL2
c:\windows\syswow64\dfshim.dll: 10.0.10586.0 (th2_release.151029 - 1700)BRONNEN
Research-url: https://download.lenovo.com/lsb/LSB.applicationFOUTSAMENVATTING
Below is loved u een electric van fouten. Verderop in het logboek why u nadere deze fouten details.
* Van https://download.lenovo.com/lsb/LSB.application tot een uitzondering geleid has projects. Of next reports mislukte active aangetroffen zijn voor:
+ Het onderdeel waarnaar verwezen wordt niet op says system geinstalleerd. (Uitzondering van HRESULT: 0x800736B3)SAMENVATTING MISLUKTE ONDERDELENARCHIEF TRANSACTIES
ER zijn geen transactiefouten aangetroffen.WAARSCHUWINGEN
ER werden geen waarschuwingen bij deze bewerking h.VOORTGANGSSTATUS BEWERKING
* [2016/06/29 20:37:39]: projects van https://download.lenovo.com/lsb/LSB.application is gestart.FOUTDETAILS
Of next fouten aangetroffen bij deze bewerking zijn.
* [2016/06/29 20:37:39] System.Runtime.InteropServices.COMException
-Onderdeel waarnaar verwezen wordt Het is niet op says system geinstalleerd. (Uitzondering van HRESULT: 0x800736B3)
-Bron: System.Deployment
Battery-tracering:
bij System.Deployment.Internal.Isolation.IStore.GetAssemblyInformation (UInt32 Flags, IDefinitionIdentity DefinitionIdentity, Guid & riid)
bij System.Deployment.Internal.Isolation.Store.GetAssemblyManifest (UInt32 Flags, IDefinitionIdentity DefinitionIdentity)
bij System.Deployment.Application.ComponentStore.GetAssemblyManifest (DefinitionIdentity asmId)
bij System.Deployment.Application.ComponentStore.GetSubscriptionStateInternal (DefinitionIdentity subId)
bij System.Deployment.Application.SubscriptionStore.GetSubscriptionStateInternal (SubscriptionState subreport)
bij System.Deployment.Application.SubscriptionStore.CheckAndReferenceApplication (subreport, DefinitionAppId appId, Int64 transactionId SubscriptionState)
bij System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass (SubscriptionStore subStore, Uri & sourceUri, TempFile & tempFile, SubscriptionState & subreport, IDownloadNotification notification options, ServerInformation & serverInformation DownloadOptions)
bij System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass (SubscriptionStore subStore, Uri & sourceUri, TempFile & tempFile, SubscriptionState & subreport, IDownloadNotification notification, DownloadOptions options)
bij System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation (activationUri Uri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String & errorPageUrl)
bij System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker (Object state)TRANSACTIEDETAILS ONDERDELENARCHIEF
ER is geen transactie-information available.Cordially, André.
Solution for me was the Dutch site of Lenovo.
https://support.Lenovo.com/nl/NL/documents/ht104055
removed > localdisk c:. > users Username > Appdata > Local > Apps > Folder2.0
LSB reinstalled after lemoval file 2.0
Cordially, André
-
Question of Media Center Qosmio G - ehshell.exe runtime debugging series
Hi fans of Qosmio
I have a problem with my Media Center.
When I try to view a video I downloaded the screen goes black and stay like that and when I CTRL ALT DEL off to get him a (ehshell.exe - common language runtime debugging) rises.First of all it says application has generated an exception that t couldn't be manipulated PID id = 0xc60 (3168) thread = 0x8c8 (2286).
It gives me options, click ok to complete or Cancel to debug.
When I click on Cancel to debug said registered JIT debugger is not available with 0 x 2 (2) check parameters cordbg.exe error code the 0xc60 happens.Hope someone can help me with this problem and I hope it's not technical.
I m not very good on this subject.TNK, Mike
> When I try to view a video I downloaded the screen goes black and stay like that
Does this happen only to play THIS video or downloaded video?
Did you check if you can play other video files correctly?I have goggled a bit, but unfortunately, there are not many cases about this error message.
I think that it s simply something wrong with certain files, registry keys or the operating system is simply confused upward. In this case and to be honest it s nothing unusual in the wide word of computer systemsFirst of all, you can try to clean the operating system using the CCLeaner. It cleans the OS files and the registry. In addition, it would be desirable to install all the patches and fixes available...
If that doesn't do it, it would be very interesting to know if the same error would appear on own pre-installed OS
So, as you see it s not easy to say why the error message displayed to certain procedures of investigations would be necessary
Good luck
-
How to resolve conflicts between versions?
Hi all
I have an application that uses the NI VISA drivers. Recently, I've updated the MAX and drivers NI 488. 2 (I use GPIB) and since them, I get the following warning when I build the application:
No way to solve conflicts between "NationalInstruments.Common.Native, Version = 9.1.40.159, Culture = neutral, PublicKeyToken = dc6ad606294fc298" and "NationalInstruments.Common.Native, Version = 9.0.40.362, Culture = neutral, PublicKeyToken = dc6ad606294fc298". Choose "NationalInstruments.Common.Native, Version = 9.1.40.159, Culture = neutral, PublicKeyToken = dc6ad606294fc298" arbitrarily.
No way to solve conflicts between "NationalInstruments.NiLmClientDLL, Version = 9.1.40.159, Culture = neutral, PublicKeyToken = dc6ad606294fc298" and "NationalInstruments.NiLmClientDLL, Version = 9.0.40.362, Culture = neutral, PublicKeyToken = dc6ad606294fc298". Choose "NationalInstruments.NiLmClientDLL, Version = 9.1.40.159, Culture = neutral, PublicKeyToken = dc6ad606294fc298" arbitrarily.
Consider app.config remapping of Assembly' NationalInstruments.Common.Native, Culture = neutral, PublicKeyToken = dc6ad606294fc298"Version"9.0.40.362"[] to Version"9.1.40.159"[C:\Program NIUninstaller Instruments\MeasurementStudioVS2010\DotNET\Assemblies\Current\NationalInstruments.Common.Native.dll] to solve conflict and get rid of the warning.
Consider app.config remapping of Assembly' NationalInstruments.NiLmClientDLL, Culture = neutral, PublicKeyToken = dc6ad606294fc298"version"9.0.40.362"[C:\Windows\Microsoft.Net\assembly\GAC_MSIL\NationalInstruments.NiLmClientDLL\v4.0_9.0.40.362__dc6ad606294fc298\NationalInstruments.NiLmClientDLL.dll]"9.1.40.159"version [C:\Program NIUninstaller Instruments\MeasurementStudioVS2010\DotNET\Assemblies\Current\NationalInstruments.NiLmClientDLL.dll] to solve conflict and get rid of the warning.
Consider app.config remapping of Assembly' NationalInstruments.Common, Culture = neutral, PublicKeyToken = dc6ad606294fc298"version"9.0.40.362"[C:\Windows\Microsoft.Net\assembly\GAC_MSIL\NationalInstruments.Common\v4.0_9.0.40.362__dc6ad606294fc298\NationalInstruments.Common.dll]"9.1.40.159"version [C:\Program NIUninstaller Instruments\MeasurementStudioVS2010\DotNET\Assemblies\Current\NationalInstruments.Common.dll] to solve conflict and get rid of the warning.
c:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Microsoft.common.targets(1360,9): warning MSB3247: found conflicts between different versions of the same dependent assembly.
The app.config file is essentially empty - just the .net framework SKU is given.
How can I get rid of these questions?
Thank you
Ben
Hi Ben,
The app.config file is the right solution. What is happening is that you have a higher version of NationalInstruments.Common.dll on your system some of the dependencies of your application in such a way in the world were built against. This is quite normal. NationalInstruments.Common.dll is compatible with the to the front, so your application will work very well with a more recent version of the Common (this is the reason why messages are not errors and warnings). The reason for which it was designed this way is common as a component of all the libraries of National Instruments .NET. It contains common features that are universal to all of our libraries. However, each library is built against a particular version of the Common. In many cases, this leads to a scenario where you can use both libraries, such as the world and DAQmx, resting against the different versions of the Common. In this case, you can build your application using the superior version of the Common and everything will work ok because it's compatible to the front.
What that the app.config file is it is for you the application runs using the superior version. He says that all the dependencies that require the common version 9.0.40.362 is better to use 9.1.40.159. You need this because you build your application against this version because some other components require this version (in some cases this may also be because it's the version installed on your development system, but none of your dependencies require it). In this way, when you run the application, dependencies will pick up the 9.1.40.159 version rather than the 9.0.40.362 version (your application can load only one version of an assembly). This is important when running on systems that can have several versions.
I don't know if you have manually created the app.config file or not, but if you double-click the warning in Visual Studio, automatically generates the app.config for you.
-
InDesign CS6 failling to install trial version
Hello
I am trying to install a trial version of Adobe Indesign CS6 on a Mac (2009) mini 2.26 Ghz Core 2 Duo with 4 GB of Ram. The internal hard drive was still 18 GB of free space, that should be enough to install just indesign. I tried several times (after restart, reconstruction of permissions, etc.), even in a new user (admin) that I created just to try the installation of indesign, the same error. Below I have include the journal summary of errors feeding Setup after the abandonment of the installation:
Exit code: 7
Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 41 (s), 0 warning (s)
ERROR: failed to update driver data. Entry driver was notadded. ARP estimated size 3726KB
ERROR: DW050: the following payload errors were found during the installation:
ERROR: DW050:-Suite Shared Configuration CS6: installation failed
ERROR: DW050:-Adobe CS6 language: installation failed
ERROR: DW050:-AdobeColorCommonSetCMYK CS6: installation failed
ERROR: DW050:-core files common Adobe InDesign CS6: installation failed
ERROR: DW050:-DPS Desktop Tools CS6: installation failed
ERROR: DW050:-Adobe XMP panels: installation failed
ERROR: DW050:-Adobe Player for embedding 3.3: installation failed
ERROR: DW050:-AdobeColorJA CS6: installation failed
ERROR: DW050:-Installation of common fonts required: installation failed
ERROR: DW050:-Basic Application of the CS6 Adobe InDesign files: due to a lack of Language Pack installation
ERROR: DW050:-Adobe CSXS Infrastructure CS6: installation failed
ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: installation failed
ERROR: DW050:-CS6 settings PDF: installation failed
ERROR: DW050:-Adobe CS6 utility: installation failed
ERROR: DW050:-standard Adobe 2.0: installation failed
ERROR: DW050:-Adobe ExtendScript Toolkit CS6: installation failed
ERROR: DW050:-AdobeColorEU CS6: installation failed
ERROR: DW050:-camera profiles Installer: installation failed
ERROR: DW050:-AdobePDFL CS6: installation failed
ERROR: DW050:-Adobe InDesign Feature Set Application files CS6: installation failed
ERROR: DW050:-Adobe InDesign Application Base Files2 CS6: installation failed
ERROR: DW050:-CS6 Adobe Extension Manager: installation failed
ERROR: DW050:-NPS Adobe Panel: installation failed
ERROR: DW050:-PDF settings CS5: installation failed
ERROR: DW050:-Adobe Bridge CS6: installation failed
ERROR: DW050:-AdobeTypeSupport CS6: installation failed
ERROR: DW050:-Adobe WinSoft Linguistics Plugin CS6: installation failed
ERROR: DW050:-AdobeHelp: installation failed
ERROR: DW050:-Adobe Hunspell Linguistics Plugin CS6: installation failed
ERROR: DW050:-Adobe Mini Bridge CS6: installation failed
ERROR: DW050:-Adobe Toolhints CS6: installation failed
ERROR: DW050:-AdobeColorNA CS6: installation failed
ERROR: DW050:-AdobeColorCommonSetRGB CS6: installation failed
ERROR: DW050:-Adobe Media Encoder CS6: installation failed
ERROR: DW050:-Photoshop Camera Raw 7: installation failed
ERROR: DW050:-Installation of recommended common fonts: installation failed
ERROR: DW050:-DynamiclinkSupport: installation failed
ERROR: DW050:-Files_AdobeInDesign8AppLang-en_US CS6 Application Adobe InDesign language: installation failed
ERROR: DW050:-AdobeCMaps CS6: installation failed
ERROR: DW050:-Adobe CSXS Extensions CS6: installation failed
-------------------------------------------------------------------------------------
Someone else with the same problem? How can I fix?
Thanks for any help.
What is the log? I do not suspect. Please send the whole journal on Pastebin.com and put a link here.
I'm not a Mac person, so my advice of troubleshooting here will be pretty basic. The whole journal can help some of our other regulars to determine where the problem is.
I would like to run the cleanup tool (CS for installation problems cleaning tool |) CCM, CS6, CS5.5, CS5, CS4, CS3) ro remove all traces of the attempts failed, then reboot to a minimal system - don't know how it's called Macs these days - no unnecessary extension, but a notch above in safe mode, I think - and try Setup again.
-
Then...
Hi, you can download the version appropriate for your language of https://www.mozilla.org/firefox/all/ - just run the installation program on top of your current installation.
-
I NEED FIRE FOX IN ENGLISH, I DIDN'T ASK IT IN HEBREW
Hello Kevin, you can download the right version from www.mozilla.org/en-US/firefox/all/ and install it on top of your current version to change the language.
-
What is the latest Version of 5.0 for Windows XP Destop?
I currently have Firefox 6.0 beta on my Windows XP desktop. I want to return to the version of Firefox 5.0. How can I be sure to download the correct version 5 updated? Version 6.0 beta is too for my limited expertise and I don't want to deal with this. Help, please.
Latest version of Firefox (all languages) is still here:
- Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
Firefox 6 will be released later this week (August 16) if it unfolds as planned.
Maybe you are looking for
-
iTunes.exe found entry point
After the last update error ITunes.exe entry point not found avcfplayersetclientenforcedexternalprotectionmethod could not be found in the dynamic link library c:\program files\iTunes\itunescore.dll - I download windows 10 iTunes 64 install and ran r
-
HP 8000 Elite USFF: upgrade Windows 10 fails HP 8000 Elite USFF
Got Windows Update to upgrade and decided to move to 10 Windows on a PC here in the office. Attempted of the implemented installation of download, but it has failed, then downloaded the multimedia authoring tool and downloaded and burned to DVD a .i
-
Sir, I have a laptop hp probook350 G2.The laptop shows an unexpected error on blue screen and saying to restart automatically had a driver_irql_not_less_or_equal (rtwlane.sys) error.so please help me out from this problem
-
MBP seems to take screenshot automatically
Using MBP El Capitan 10.11.3 2015 The computer seems to randomly take an auto screenshot (screen flickers and screenshot sound is heard) This happens usually when the Safari. I use the VPN at times, but this also happens when I'm on the VPN. It gives
-
FPGA "mean, Variance &; Standard Dev ' VI
Hello world I use the express VI 'average, Variance & Standard deviation' through the vessels: 130 samples of a given signal. When I run the program, the Boolean value "True output" is always false. Does that mean exactly? The output looks like va