Version of the Java Plugin problem

It seems that the last Plugin Java for Firefox 10.0 that works is version U29. However, Oracle pushes 31 as the most recent version and «» But it does not work in Firefox 10. Not really a problem except that your Web page that checks plugins for "out-dated-ness" indicates that the U29 version is "obsolete".

Going through the process of updating the Plugin Java from this point is a particularly nasty process (from Oracle fault, of Mozilla) which does nothing of value. It can even install the next version, which, as I said, does not work.

You can correct your web page so that it does not indicate the U29 version is outdated?

Thank you.

OK, I added that a firewall rule out for the program, "jp2launcher.exe" and now the plugin works again. I had already created outbound permission for Java.exe early on that it was necessary, of course, for the plugin to work.

Of course, this does mean that it is absolutely the solution.

I would like to say that this is probably the solution, however.

If it turns out that this is the solution, it means that jp2launcher.exe needs internet access SOMETIMES but not always.

PHEW! What a pain in the @# *...

And, Yes, I realize that my setup of the firewall windows 7 has contributed to this problem. I just wish that when a program attempts to connect and is blocked windows 7 this would report to me with a dialog box, as they claim would happen, so I would like to know. There is, without doubt, a journal entry created to record the event, buried somewhere in the windows event logging system. A lot of good it does me, however!

Thanks again to all for your comments.

It just shows that there is no problem I can't solve that I don't have everything to create myself. A bit like the Government, if you know what I mean...

Charles.

Tags: Firefox

Similar Questions

  • Web browsers are no longer because of the version of the Flash plugin (problem reappeared after a prior solution)

    jeromiec83223024



    I was part of a focus group in which Lenovo many users had problems with the Flash plugin on their web browser (Re: does not have a plugin (Shockwave Flash). ) forums.adobe.com/message/7992871#7992871). Problems consisted largely of messages does not work on Chrome, Edge and IEon websites such as Facebook, Youtube, Gmail and others who use chat or to play html5 videos. Chrome, the message indicates that a plugin (Flash) became unresponsive, and then the page can no longer be reacts with. On the edge, it just stops responding. These problems have been resolved for a few days now, but after that my Windows updated again last night itself, the problems came back.

    Everyone knows these question make a comeback? I use a Lenovo IdeaPad Yoga 13 with Windows 10 x 64.

    Hi Jean-Luc.

    Yes, hardware acceleration is turned off in the Chrome settings and via the global settings for a while (before the error on which came back again). Will let you know if this problem persists. If all goes well, it was something unique. I have "he's trying to use right Chrome to see if the error appears again.

    Thanks again!

  • Problems with configuration properties and the java plugin

    Hello

    I have test the java plugin from the hyperic documents. Autodiscover works very well. Now, I had the problem if I want to change all "configuration properties" I get following error message:
    ' The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 141.73.130.146:2144: java.lang.NullPointerException.
    Wait I use properties by default, then I don't get any errors.

    What is the problem?

    MyAutoDiscoveryServerDetector.java
    ---------------------------------------------------------------------------------------------------------------------------
    SerializableAttribute public class MyAutoDiscoveryServerDetector extends ServerDetector implements

    {AutoServerDetector}

    public list getServerResources (ConfigResponse platformConfig)

    get {PluginException}

    Server list = new ArrayList();

    Server ServerResource = createServerResource ("My Auto-Discovery Server->" + (x + 1));

    ConfigResponse productConfig = new ConfigResponse();

    productConfig.setValue ("myTimeout", String.valueOf ((x+1) * 1000));
    productConfig.setValue ("myUrl", "http://127.0.0." + (x + 1));
    productConfig.setValue ('Description', 'Description - my Auto Discovery Description->' + (x + 1));
    productConfig.setValue ("myValue", 10);

    server.setProductConfig (productConfig);

    Servers.Add (Server);

    return of the servers;

    }
    ---------------------------------------------------------------------------------------------------------------------------

    HQ - plugin.xml
    ---------------------------------------------------------------------------------------------------------------------------
    <? XML version = "1.0"? >
    < package = "com.citytechinc.articles.hyperic.plugin plugin" >

    < name of the filter = "domain" value = "My Auto Discovery" / >

    < name of the server = "MyAutoDiscoverServer" version = "0.1 c" platforms = "Unix, Win32" >

    < plugin type = "autoinventory" class = "MyAutoDiscoveryServerDetector" / >
    < plugin type = 'measure' class = "MyAutoDiscoveryServerMeasurementPlugin" / >

    < config >

    < name of option = 'myUrl '.

    Description = "Enter the URL for this resource"

    " default = ' http://127.0.0.1 "/>

    < name of option = "Description".

    Description = "enter a description of this plugin"

    default = "default my Auto Discovery Description" / >

    < name of option = "myTimeout."

    Description = "time-out for something in my plug-in.

    default = "0" / >

    < name of option = "myValue"

    Description = "a metric value.

    default = "10" / >


    < / config >


    < name metric = "availability".
    alias = 'availability '.
    Template = "System.avail:type = Platform:Availability"
    category = "AVAILABILITY".
    indicator = 'true '.
    collectionType = "dynamic".
    units = "percentage" / >

    < name metric = 'value '.
    alias = 'value '.
    model = "" MyPlugin:Type = value: value ' "
    category = 'USE '.
    indicator = 'true '.
    collectionType = "dynamic".
    units = "none" / >

    < / Server >

    < / plugin >
    ---------------------------------------------------------------------------------------------------------------------------

    UM,.

    This must be due to an incompatibility between the definitions of plugin in the server (and/or of the database) and the agent.

    First of all, always check the server log, errors that appear it should lead to the cause.

    The plugin xml initialized ok on the server, or any error appear?

    You go to Administration-> default trace and see your plugin (Server Type: MyAutoDiscoverServer) and everything is there?
    If this isn't the case, errors occurred when starting the server, check the log.

    Did you start to shave - created the plugin, added to both server and agent, autodiscovery, the platform/server added in Hyperic - or you already had the server/platform added in Hyperic and who has made some changes in the xml plugin that may be in conflict with what is already in the Hyperic database?

    Generally the pitfalls that come from these errors.

    Been there, done that.

  • version of the Flash plugin

    Hi team

    I followed every food I can find on google, adobe and mozilla support RSS to solve the course adobe flash plugin problem, I have uninstalled and reinstalled more than 8 times now, even tried to install older versions, and it does not work, have you done an update for firefox or something that is the cause, not adobes plugin.

    Can you please help me, as I cannot use firefox at all with this issue, as nearly every site has flash.
    

    What kind of problem (s) do you have with the Flash plugin?

    The Adobe test page shows the version of the Flash plugin?

    The Flash plugin shows in "tools > Modules > Plugins '?

  • latest version of the flash plugin does not not in FF

    Flash broke seen plugin checker and said now, update after update and try 7 attempts it will still not updated? I restarted the pc e.t.c.plug in auditor still sayd update flash

    I hope someone can help

    There is a problem with the latest version of the Flash plugin. The solution for Flash crashes is to return to an earlier version of Flash. Instructions and more details are in this article - Adobe Flash plugin has crashed - avoid that it happen

  • Firefox does support java applets if the "next generation plugin" is disabled via the control panel of the Java plugin.

    I'm still trying to get a definitive answer to this question.
    My applet is not 'Next Generation in line'. When we run our applet in Internet Explorer, it works very well as long as we disable the "next generation Plugin" via the Java plug-in Control Panel. However our applet does not work in Firefox if the cmdlet-the next generation"is disabled.

    It is a requirement that is I want to run an applet in Firefox 3.6.x or higher that the "next generation plugin" be activated via the control panel of the Java plugin.

    The current versions of Firefox (3.6 or later version) can only run Java applets through the next generation plugin.

  • The Java plugin does not appear in the Plugins tab

    The machine is a SLES11 running on x86_64 architecture. Firefox is 3.0.6 (from the installation of SLES11 DVD) version.
    I installed the jre-6u25 under/usr/java.
    I restarted Firefox after installation.
    No Java plugin is available under Tools/Add-ons/Plugins.

    What should I do to make it appear?

    I wonder why the IBM java that comes with SLES 11 is not meet your needs, but that is a different debate completely.

    It looks like the jre installation instructions are assuming that there is no such thing as SLES 10 as when you look at the directory of plugins for firefox.

    To get the plugin works I did the following:

    1. I installed the jre as shown (that is dire./jre-6u26-linux-x64-rpm.bin)

    2 created a directory of plugins in/usr/lib64/firefox /.

    3. then modified the rights on the directory (chmod 755/usr/lib64/firefox/plugins /)

    4. has created a softlink in the libnpjp2.so file
    ln-s /usr/java/jre1.6.0_26/lib/amd64/libnpjp2.so

    5 restart firefox and checked for the plugin, who was there.

    6. went to www.java.com/en/download/testjava.jsp and got the message "your Java work.

    What the above assumes that you are using the 64-bit version of SLES 11, but I think that the same thing on a 32-bit installation would work also.

    The alternative is to use the yast software management and install version 1.6 of the IBM Java, which is included with SLES 11 making sure that you also install the java plugin rpm.

  • is there a way to tell firefox allow and remember the java plugin for all users via the command line or a script?

    Hello

    I have about 200 computers I want to push the next to parameter

    allow and remember the java plugin for firefox for all users
    

    is it possible to do this via a script or configuration file?

    You must create two files in the Firefox program folder.

    • local - settings.js file in the defaults\pref folder where you will find the channel - prefs.js
    • mozilla.cfg in the main folder of the Firefox program
  • install the java plugin without internet access

    I need to install the java plugin for java 1.7.55 on a criterion which is net have access to internet. Where can I download the plugin and how I install it on a stand alone machine?
    Thank you...

    It was him... Thank you...

  • Hi, I have the latest update of Fire Fox which is 10.0.2. I can't get the Java plugin to download for Firefox.

    I am wanting to get Java working on Firefox, if I can use the cat and other programs that use Java, and no, it's not Javascript I'm talking. Whenever I go on a site that uses Java it tells me that I need to download the Java plugin. When I click on the link, it starts to download the Java plugin, but instead of installing the plugin it installs Java for Internet Explorer instead.

    Ken

    Try to uninstall and reinstall Java.

  • Developer Edition does not have the Java Plugin

    My configuration:
    OS - Windows 7 Professional 64 bit
    Browser - Firefox Developer Edition
    Java - SE Runtime Environment build 1.8.0_51 - b16

    Installation path:
    Browser - C:\Program Files\Firefox Developer Edition
    Java - C:\Program Files\Java\jre1.8.0_51

    Description of the problem:
    My operating system, browser, and Java version are all of the nature of 64-bit and properly installed, however, Firefox does not have a Java plugin in the Add-ons Manager and I can't run Java on all Web sites. When I check Java on their website, it tells me that Java is disabled or not installed, but Java is enabled in the Java Control Panel.

    Hi mrflom, that's to be expected - the 64-bit versions are delivered with support plugin limited for the moment (single flash is in the whitelist). If you rely on the other npapi plugins please continue to regularly use 32-bit builds.

  • using the java plugin instead of jinitiator

    Hello

    I am using a java plugin instead of jinitiator because I switch to ubuntu.
    I tried the plugin java-sun6 - both the OpenJDK, Icedtea plugin but I have the same problem in both entities, the application is running, but no icons appear.
    I was wondering if this could have something to do with the versions from the jinitiator used was 1.1.8.16, and the plugins I've tried are sun-java6 - plugin:6.22 and icedtea6 - plugin:6 b 20 - 1.9.2 - 0ubuntu1.

    Thank you
    Mara

    Hello

    Please disable Windows Explorer blocker.
    hope this helps you.

    Sarah

  • The determinations Plugin problem - Tomcat6/Linux Web

    Hello

    I'm trying to deploy a WAR file that contains a plugin custom on a Linux instance EventHandler. For some reason, the path of the plugin is not found. The same WAR file works correctly when it is deployed to Tomcat on Windows (same version of Java) and same version of Tomcat. Anyone know what may be the issue, and what I am doing wrong? The modules code seems to work fine. The only problem is the custom plugin.

    Error message:
    GUARD com.oracle.determinations.interview.engine.local.LocalInterviewEngine - Plugin Directory cannot be initialized. Some plugins will be responsible
    java.lang.IllegalArgumentException: path cannot resolve: plugins

    Apache Tomcat/6.0.26
    JVM: 1.6.0_20 - b02 (Sun Microsystems Inc.)
    Oracle Linux 5 (2.6.18 - 164.el5, i386)
    OPM Version 10.1

    Location of the plugin file:
    web-determinations/WEB-INF/classes/plugins/MyCustomPlugin.jar

    Thank you!

    Hello

    It is a known problem on * nix systems that has been fixed for the next release. In the meantime, you can work around the problem by manually configuring the plugin loader. To do this, you must put your plugin jar file in the WEB-INF/lib directory and specify the list of ';' to be registered in the property plugin.libraries of the application.properties file, for example, classes of plugin

    plugin.libraries=my.event.Handler;my.custom.DataAdaptor;my.custom.RulebaseService 
    
  • 24 of Firefox click here to read the version of the flash plugin!

    Earlier the blocked plugin flash objects individually, but now if we click on a flash content then a message asks us if we want to allow flash content.
    HERE'S THE PROBLEM
    If I have him all allow playback of flash content startr.
    is it possible to allow each flash as the previous version content

    my point was that this feature is still at an experimental stage - is to provide that it is subject to change until she becomes power in firefox by default. the above extension works very painless and reproduces the behavior of versions of firefox prior to 24.

  • Java Plugin problem with 11.1.2.2.0

    Try to run the form Builder on my 64 bit Windows 7 box.

    When I try to run a, he always uses Firefox and I always get the message "a plugin is required to view this content.

    FF says: I'm up-to-date with the Java 1.7 plugin so I downloaded the 1.8 (Java Deployment Toolkit 8.0.400.26) and I still get the error.

    FF seems to think that each Java plugin is a problem.

    I tried to put IE as my browser by default, but is still starts FF.

    I searched all morning, but I can't seem to find a solid answer on how to get my forms to run on my windows machine.

    This shouldn't be this course. Come on Oracle, you can do better.

    Joe the Jet wrote:

    ...

    Now I have to sort out why it's not find my TNS files!
    ...

    The plague to have several Oracle products installed on a single computer is bring all use the same copy of the TNSNAMES. ORA.  I like to create a folder in the Oracle home (C:\Oracle) home of my tnsnames.ora and I call it TNS_ADMIN.  Then, add a TNS_ADMIN "String value" entry to your Oracle Home registry entry and set the value of "C:\Oracle\TNS_ADMIN" so the Forms Builder will find your tnsnames file.  Then, you need to change the default.env and update the parameter TNS_ADMIN to point to the directory where you have your TNSNAMES.ora location.  The default.env is located in the ORACLE_HOME\Middleware\user_projects\domains\ClassicDomain\config\fmwconfig\servers\AdminServer\applications\formsapp_11.1.2\config directory.

    If you use Oracle Reports, then you will need to edit the reports.bat file - there is a setting TNS_ADMIN there as well.  The reports.bat will be located in your ORACLE_HOME\Middlware\asinst_1\config\reports\bin directory.  This path assumes that you used the name of 'Instance' by default when you configured WLS and FMw.

    Craig...

Maybe you are looking for

  • restrict the scaling axis in the xy graph

    Hi all After you apply due diligence in analyzing the context-sensitive help, labviewwiki and these fine forums, I couldn't find a hint on how to do this: I like tor would restrict the scale of only the value of a XY Chart axis. Or, to put it in othe

  • Extensions JavaScript (fake?)

    The code below seems broken from the outset as t apparently returns the same value of every call, regardless of the result of the Java bridge I intend to write a collection of routines to support, but as my Java is missing I want to be sure I underst

  • About light on keyboard of blackBerry Smartphones

    How can I cause the keyboard light stays on while using the keyboard?  I had a couple of situations where I was in a dark place and by typing an email and while typing from the keyboard light is out.  Shortly after she came and then a little while la

  • How to install a printer port parallel port Pavilion dv5 Notebook usb

    When trying to install my printer HP DeskJet 610C Parallel Port on my HP Pavilion dv5-1235dx Notebook PC with Windows Vista Home Premium 64-bit, I followed the instructions given by the HP Support about two years back. I connected the two devices wit

  • There is no box selection to adaptation in my window of content aware movement

    Why is there no adjustment box in my content of movement in the current window? There is a structure which is the same thing?