Versioning / updating for PlayBook and BB devices

Similar Questions

• Releases of question on 2 separate, one for Playbook and the other for BB10

  Hello

  At the moment we have an application that is currently enabled for BB10 and Playbook. However, we've recently re-written the application take over much better phone interface, and we would like to submit a version that is not specific to BB10 and have a separate for Playbook version.

  What I hope we can do is just uncheck the BB10 of the current version and let the Playbook checked, then submit a new version with only selected BB10. However, I wasn't sure if this overwrite the version of the Playbook and pull it store since the release "more recent" doesn't have the verified Playbook. Is it possible to have these 2 releases by-side, but be in the same "application"?

  Thank you
  Jake

  It works as you expect it. In fact you don't have to uncheck the BB10 phones on the old version.

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• Downloaded the update for Firefox, and now I can't get rid of AOL.

  Downloaded the update for Firefox, and now I can't get rid of AOL. I tried to remove anything that is related to AOL and when restart Firefox... There are once again AOL. I even reinstalled Firefox... He was there again.

  Where AOL is displayed - homepage?

  I think the first thing to check is if you have any modules related to AOL. These can replace your regular settings. You can view and disable all extensions essential or unknown here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Note that in most cases, you should use the link to restart Firefox to actually disable the extension that you have chosen to disable.

  Then, to fix your homepage, try the procedure described in this article: How to set the home page.

  If there is a problem with your suppliers of research from Google for AOL, try this extension:

  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  Any improvement?

• Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

  Drivers Vista MSN

  Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

  Hello

  Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

  One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

  If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

  Here's how to uninstall specific updates;

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

  See you soon.

  p.s. Always get the latest updates of the driver from the hardware manufacturer.

  Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

  http://www.brother-USA.com/downloads/default.aspx

• No button back for Playbook and Z10

  My request of WebWorks HTML5 for Playbook and Z10 occasionally open external web pages and at least in the Playbook there no back button during the display of the external web pages. How can I add a "back" button? I spent a few hours looking for solutions, without success. I looked at bbUI.js, but it seems not able to add a "back button" while looking at an external pages - unless I'm mistaken.

  Any suggestions?

  Bb10, your solution is childBrowser: https://github.com/blackberry/BB10-WebWorks-Samples/tree/master/childBrowser

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• I can not install updates for photoshop and the product is registered and properly installed

  I can not install updates for photoshop and the product is registered and properly installed cat. I tried and they were worthless, this system I get when I click on the button in the error message customer support https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  Customer chat was worthless, and I am really frustrated.

  You can download and install updates,

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5373

  But if you have a complaint about your serial number, chances are that they thought that it was hacked and blacklisted. You can't be at fault, you simply a forgery.

  Nothing can be done if this is the case.

• Need to disable notifications update for reader and flash player

  I hope that I ask this question in the right place.   Please direct me if I don't.

  Due to some problems with many of our applications that support web and rely in IE.  When are 1500 + users get invited up to date drive or a flash drive, they do not have to disable the 'optional' box to download and install chrome.

  This cause many helpdesk calls because their web applications do not work properly in chrome.

  We found the documentation: http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Reader_Updater.pdf

  to turn off update notifications, however check machines both xp and win7, the key to page 16 of the pdf mentioned above, did not exist in HKLM, but he found in HKCU.   Tried to create the iCheck and iCheckReader in the two places, but not sure if they work effectively.

  Here are our real goal: we want not only to users, you are welcome to update player or flash because the installation of chrome drive.   We do not want reader or flash to update 'automatically '; We always want the possibility to update manually.

  How can we turn off all automatic update feature and create updates so that users never see them in both applications?

  We currently have users with reader, 8, 9 and 10.

  If you can provide the detailed steps, documentation, etc., registry keys.  I would be very happy.

  Thank you

  Chad

  You must use featurelock key to disable updater for Acrobat and Reader. According to the documentation, http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Reader_Updater.pdf

  you got, has all the information.

  See section 2.5.2

  For example, use the following registry to disable the Player 10 on 32 bit OS update.

  Reader

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\10.0\FeatureLockDown]

  "bUpdater" = DWORD: 00000000

  I have no idea on how to disable updates for Flash. You must post in the Flash Forum.

• Installed CC and my manager CC points only updates for CS6 and says 'Install' next to the CC version

  Hi all

  I don't know why this is, but my CC Manager now only displays updates for CS6 programs and it says 'Install' next to the CC version. I already have the latest CC versions installed on my PC, but now they do not receive the updates.

  Any ideas how to make it work once again, I don't want to have to re - download and install again. I clicked on install Adobe prelude CC and it seems to go through the installation process, as if I have already installed it. Please see attachment

  Thank you very much for any help you can give to get this problem solved.

  
  Bradley

  

  Please see the thread: http://forums.adobe.com/message/5584088#5584088.

• Why do I get updates for silverlight and visual studio 2008? I don't have one of these programs on my computer.

  The only thing I know that I can do is to hide these updates.

  Hi Liz Welker,.

  Please use the Microsoft Windows 7 forum.

  (a) is your Windows 7 operating system?

  (b) these updates fail to install?

  (c) that you get errors because of these updates?

  Check if find you Microsoft Silverlight and Microsoft Visual Studio in programs and features

  If these are not present in programs and features , then you need to reset the Windows components by following this link because it contains fixit : http://support.microsoft.com/kb/971058

  Importance of Microsoft Silverlight and Microsoft Visual Studio:

  Microsoft Silverlight is a programmable web browser plugin. It allows many features such as animations, vector graphics, and audio-video playback, all these applications are rich internet applications. Version 2.0 of Microsoft Silverlight was released in October 2008. He got a few other interactive features and support for .NET languages and development tools. It is compatible with many web browsers used on Microsoft Windows and Mac OS X operating systems. Symbian and Windows Mobile 6 phones will be also supported. New free software of third party named Moonlight is under development. Once released, it will bring compatible functionality to GNU/Linux.

  Microsoft Visual Studio is an integrated development (IDE) of Microsoft environment. It can be used to develop console and applications to graphical user interface and the Windows Forms, web sites, Web applications and web services in both native code with managed code for all platforms supported by Microsoft Windows, Windows Mobile, Windows CE, .NET Framework, .NET Compact Framework and Microsoft Silverlight.

  
  Importance of updates from Microsoft:

  Microsoft regularly issues updates or patches to fix security problems in their software.  The critical updates are ones that you should be concerned.  If they are not implemented, it leaves your computer vulnerable to hackers.  Service Packs are updated larger who upgrade and resolve security issues.

  If your operating system is windows 7 and that you don't want, disable the automatic updates for these programs.

  Activate the update or disable automatic

  So that Windows install important updates as they are available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Microsoft updates and optional updates are not downloaded or installed automatically. For more information about automatic updating, see Understanding Windows automatic update. To learn more about the types of updates that Microsoft publishes, go to this section of the Knowledge Base on the Web Microsoft Help and Support site.

  1. open Windows Update by clicking on the button start the picture of the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also choose if you want to allow anyone to install updates by selecting the allow all users to install updates on this computer check box. This applies only to updates and installed software manually; automatic updates will be installed independently of the user.

  For more information, see: http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  hope this helps
  Aziz Nadeem - Microsoft Support

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• Quite the last update for windows and received a message on the bottom right moniter daying is not authentic.

  Separated from

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/after-running-Windows-updates-i-get-a-message/efedac8b-ad9f-4EBF-9d6e-9506af0de71a

  Diagnostic report (1.9.0027.0):

  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0x80004005
  Windows product key: *-* - CP8Q7 - PGRHY-T4G7J
  The Windows Product Key hash: p7YNR6rIXP35aHkFt6PJppPJKpk =
  Windows product ID: 89572-OEM-7332992-24863
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.0.6000.2.00010300.0.0.002
  ID: {9667CCD6-B900-4A50-BE95-1B3D4D6E883D} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Basic
  Architecture: 0x00000000
  Build lab: 6000.vista_rtm.061101 - 2205
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {9667CCD6-B900-4A50-BE95-1B3D4D6E883D}1.9.0027.06.0.6000.2.00010300.0.0.002x 32*-*-*-*-T4G7J89572-OEM-7332992-248633S-1-5-21-3153602336-2048612419-3997914719Dell Computer CorporationDimension 4550 Dell Computer CorporationA0520030127000000.000000 + 000DA303507018400E204090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6000.16386
  Name: Windows Vista HomeBasic edition
  Description: operating system Windows - Vista, channel OEM_COA_NSLP
  Activation ID: bb4c2c10-dc0d-4ce6-8824-ee71ddb63c07
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89572-00146-329-924863-02-1033-6000.0000-0272003
  Installation ID: 015974609596727821243871569972405104771676389653335770
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: T4G7J
  License status: unlicensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Aware of Hash HWID: MAAAAAEAAgABAAEAAQABAAAAAgABAAEAnJ + 8rHjqwgSIyfpX1sPy9NYt7IysVpbF

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL 4550
  FACP DELL 4550
  STARTING DELL 4550
  SSDT DELL st_ex
  ASF!   REFERENCE DELL 4550

  Use system restore to before the appearance of the error message.

• WebWorks for Playbook and using photo APIs

  Hello

  The API documentation, I found that the camera what API can be used to call the camera from an application. Thus, it can be used to capture an image that will then save the image in a folder of the playbook? If Yes, how can I know the name of the file that is the last one added to the camera file in the shared location? Please help me with this.

  Thanking you in advance,

  Praveen

  garciaf wrote:

  Is there a way to get the photo you take with the camera.

  You must use the Phonegap Framework http://www.phonegap.com/

  They provide a specific function that represent you to get the URI of the file or data directly.

  (But if you get the data directly there is a problem of memory)

  Another way is to encode your own API in Java and add in the web works. (If you choose this solution and the success you, I would be very interested in the result)

  Concerning

  Hi garciaf,

  You are right that PhoneGap has this API for smartphones, but they have not yet supported for Tablet OS.  And on Tablet OS, you can't create an extension using Java, because it is not a Java virtual machine.  You must create an extension with ActionScript

  The takePicture() API becomes even closer now to PlayBook and smartphone.  You can see what the API signature will look like in the jsdocs found here:

  https://github.com/BlackBerry/WebWorks-API-docs/BLOB/Delta/API/blackberry_media_camera.js

  It will be the signature of the API used for both BONES of tablet in the 'Delta' version and the Smartphone 'Epsilon' version:

  https://github.com/BlackBerry/WebWorks/Wiki/Roadmap

• Windows 7 update for driver installation windows device update hp950c does not work

  I have a 959c HP printer.  He has worked in the past when I managed to get the updates, although she saud there is a problem with the driver installation.  This time however, I can't update windows to find the list of devices online and update.  I tried all means known and common installation of a driver. I have yet to try a former driver XP, but I'm hard-pressed to find one.  Help, please.

  Thanks in advance.

  (Home premium Windows 7 64 bit)

  Ian

  I have a 959c HP printer.  He has worked in the past when I managed to get the updates, although she saud there is a problem with the driver installation.  This time however, I can't update windows to find the list of devices online and update.  I tried all means known and common installation of a driver. I have yet to try a former driver XP, but I'm hard-pressed to find one.  Help, please.

  Thanks in advance.

  (Home premium Windows 7 64 bit)

  You mean you have a ( HP Deskjet 959 c printer<-- web="" page="" link,="" click="" on="" it)="" manufactured="" and="" supported="" by="">
   
  The problem is that HP stopped supporting this particular Windows XP device - in fact, in view of the date that the latest driver Windows XP is out (December 3, 2001), they have barely supported it under Windows XP.
   
  I'd say you're probably out of luck (time for a newer printer?) if their method to operate on Windows 7 64-bit on this web page is not printing of certain abilities. Basically, you plug it in, let it start to install the driver, choose to download from Windows Update for drivers more, choose the closest to you and go with it.