Versions of the current process

Similar Questions

• How do I see the old version of the IOM process form

  Hi Experts,
  
  Could you please let me know how to see the old version of the IOM process form. According to my understanding now if we will do an active version in IOM, then we can see the details of this particular version. How to see the details of any previous version. Currently if I choose the old version in the form of process, then also it shows me the current values of the version, or the field.
  
  Thanks in advance.

  Select the previous version the current version drop-down list. It will show you accordingly. This is how you can reactive the older also

• 'Update of the current process' of the LR5 missing exclamation point?

  Can anyone tell my why my older images (in LR 5) isn't an exclamation point asking me if I want to update the current process?

  I was just reviewing some more older. JPG files that were imported initially with Lightroom 2 or 3.   In the Panel to the point the elders 'Recovery' and 'Fill light' settings are displayed, which alerted me to the fact that the process of the most recent is not used.  If I remember correctly, he used to be an exclamation in the corner of each photo alert me to it.

  I discovered that if I right click on the pictures at the bottom of the screen, I can select "Developing the parameters" / "Update in progress", , but I found the exclamation point to be more practical.  I hope that there is a way to get this feature.

  Thanks in advance for advice :-)

  The exclamation point was changed/moved in LR5. It is now a symbol "lightning/lightning" under the histogram in the develop Module. Hovering over the icon will tell you that the version of the process, click the icon will allow you to update.

  

• ACR6 - update of the current process

  Can someone please explain to me why there is an update to the current process of ACR6 button? Why is it necessary?

  It is not one in ACR5.7 (AFAIK), although there is no new details controls either.

  Something bad happens once you decide to accept the 2010 process? Something that can not be reversed?

  I'm sure it will be obvious when explained, but I don't see what it could be!

  You guessed it, Yammer P. Demosaic is separate and independent of the process version. The only things that fall under the 2003-2010 process version distinction are the sharpness, noise reduction, and fill light.

  Eric

• How to play an old Command & Conquer - Red Alert Win95 version on the current system

  How to play an old Command & Conquer - Red Alert Win95 version on the current system

  Hi PhillipBunting,

  1 Windows operating system you are using?

  If you are using Windows 7, you can consult the following link to check the compatibility of the game.

  Command & Conquer - Red Alert compatibility

  You can try to try to run the game in Windows 95 compatibility mode, and check if that helps. Execution of convenience store compatibility is just a workaround solution, if this does not help, you might need go to the new version of the game.

  Make older programs in this version of Windows

  Hope this information is useful.

• How to upgrade a resettled Acrobat 9 Pro 9.0.0 version to the current version?

  How to upgrade a resettled Acrobat 9 Pro 9.0.0 version to the current version?

  Under the help in the top tool bar option should have an option for updates...

• The Task Manager appears in the 'current process' screen and I can't navigate to another function of Manager tasks?

  When I click on task manager it happens in screen '' current process. '' The only choice I have is to show all users process or to complete a process. I have to hit the ESC key to exit and can not navigate to other functions of Manager tasks. I remember that you try to use the system restore to solve this problem for a long time (at least 2 years ago) and he has not solved it. Just thought it might settle through updates system over time. This isn't something, I use often but I have the function to return if possible. Any ideas? the task manager can be downloaded and re-installed or maybe a registry setting problem?

  Hello

  You are in a Mode of Task Manager, called 'small footprint Mode. "

  Double-click inside the border of the Task Manager to return to the Normal Mode.

  "How to switch between Normal Mode and small footprint in Vista and Windows 7 Task Manager"

  http://www.Vistax64.com/tutorials/114377-Task-Manager-small-footprint-mode.html

  See you soon.

• I need to reinstall Media Encoder CC (previous version than the current) because I need flv export... Any advice?

  Hello

  Some of my clients needs always to get videos to flv for his site, and I saw that Media Encoder CC 2014 doesn't have this option more.
  Unfortunately I already uninstalled the previous version, no way to recover?

  Or y at - it a plugin for the current version that allow export flv?

  Any help would be really appreciated, I do... tomorrow :/

  Thank you very much!

  SOUL is downloaded and installed with flash, after effects and pro first.  install one of these versions of cc and if soul cc is also installed.

• Create 'copies' of the current process

  I have enough complex process a few switches witch... As the process is growing, its harder if I want to test something.
  
  Is it possible to create a backup of process (for example before the switch node)? Now, if I want to test the possibilities of the process, I have every time to create processes start and repeat all the way, then select another choice, etc.. And then again and again. Better would be to create a copy of the referral process for example in the db (but I do not know what soa schema table is stored processes...) and then restore it and I can test all the options very quickly.
  
  Does anyone know how or if its possible? THX

  There are many ways, we need to put a switch and put a conditino as 1 = 2 around the staves that you want not to test.

  Another way is just to comment on the bpel source that you do not want to test.

  Kind regards
  Ajay

• Display of the current process

  I am currently a manual backup on USB. The records, I'm moving are large and the process for the first folder is the estimate of 10 hours on the web administration page. My question is if I close the web administration and then page reload the bar of the process with the file transfer progress disappears, is it possible to get back it? I guess that the process continues even if the web page is closed? Or the process stops? And finally, if it stops in fact, is there a better way to do this?

  Thank you

  Phil

  Hi pdid1,

  There are better ways to back up files on your ReadyNAS without accessing the admin page. First of all, you can create a backup task in the admin page by selecting the source (I presume a folder in your PC) and the destination (one of the actions of your ReadyNAS). Finally, the ReadyNAS shares access, using the file Explorer using \\192.168.1.x (NAS IP address) and you can do a copy & paste type of backup.

  I hope this helps!

  Kind regards

  BrianL
  NETGEAR community team

• my task manager does not display the current process. It's just a white square

  When starting the Task Manager it does not show all processes accept the one / s that are used at the present time, such as "Firefox". There is no process background shown and instead of a list of process as there used to be, now, it's all there, it's a white box, displaying the above mentioned one or two processes that are open right now.

  Press on and hold down the ALT key, and then double-click an opening of the border of the Task Manager window.

  You are currently in minimum mode of the footprint.

• Do I have to re install Windows 7 Ultimate Retail Version over the current version of Windows 7 Ultimate OEM "Trial"?

  I have an old PC which worked fine with Windows XP on it. I wanted to continue to consider using it with Windows 7 (instead of buying a new machine).

  So my friend gave me a copy of the version of Windows 7 Ultimate (OEM) to try to see if the machine was worth keeping (i.e. good performance with my critical apps loaded on this subject).  Using this version, I was able to switch from Windows XP to Windows 7 using a clean installation. I have re-installed critical applications to check performance with the new operating system.  I was impressed (and happy) so I decided to purchase a licensed copy of Windows 7 Ultimate. I finally found a great offer and bought a copy of Windows 7 Ultimate (Full/Retail - not OEM) with the required activation key via the Internet (to be delivered next week).

  My question is: since I now have the version of Windows 7 Ultimate (OEM) already installed on my machine, I will have to perform another clean installation when my Windows 7 Ultimate retail version coming? I would really not all over again. I would like to simply enter the Activation Code of the version of Windows 7 Ultimate (Full-detail) when it arrives. What is the best way to reach my goal?

  http://Windows.Microsoft.com/en-GB/Windows/help/genuine/product-key#T1=tab01

• What are the causes of shell service core to define? Task manager displays only the current process

  When start Windows XP and IE8, a 'coreserviceshell' routine runs for about 10 to 15 minutes, access to the network and really slows access IE, alomost prevents any access ended running.

  Also the TASK MANAGER does not display the menu headers to view the performance of the system, how to reset it?

  Which; good s.

  If running chkdsk /f resolved the problem?  It's the answer that you have marked as the answer...

• New version of the process, without affecting the current proceedings

  Hello

  We have long lived processes in Production.

  I noticed that if a new version of that process is deployed, that all instances of this process alive will begin to use the new version.  that is all the processes have not been completed.

  I'm just trying to work on what the best practice is to update a version of Production process?  Is there a way to make sure that all instances complete existing processes using the version they have been created with?

  I must:

  -deploy a new process and try just to allow for the current process to stall or fail?

  -Try to create a new version of the Application, or a parallel version of the process running side by side.

  If there is not a simple answer, so I see this as an important gap in the current implementation of process management.  Any thoughts would be appreciated.

  Thank you

  All instances of the current process will continue on the version they started with. All new instances will use a new. After the last 'in progress', instance is completed that the version is purged.

  Paul

• API calls for the current status of running processes and things

  Hi all

  I wonder if anyone no matter what API calls to get the current process list and the list of all programs installed on the BB device

  If there is not these API calls, is there another approach to get these lists?

  Thank you

  Dan

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/system/ApplicationManager.html

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/system/CodeModuleManager.html