Vertical blue lines on Qosmio G10

Similar Questions

• Vertical pink line on Qosmio G20 LCD

  Hello all,.

  The screen of my Qosmio G20 was displaying a pink vertical line (exactly 1 pixel width) whenever it returns a long out-of-State (i.e. at startup, wake up from hibernation, etc...). The line persists for only a few seconds to gradually disappear the transition by means of green (and maybe white) before to do so. It is also worth noting that the pink line does not appear on his return from a short off the coast of the State.

  Unfortunately I do not have external screens on hand to test if it's a hardware or software problem, so I was wondering if anyone out there has experienced this before or pink line if there is a clear diagnosis for her (I suspect material myself but...).

  Kinder,.
  Lee.

  Hello

  Seems your equipment malfunctions but it s, not easy to say what's wrong without a detailed test.
  Everything is there, we can provide suggestions only.
  Of course, it s might be the graphics chip to malfunction, but I wouldn't say that this s REALLY a graphics card failure.

  The connection to an external monitor would be useful to provide some additional suggestions...

  However, you will definitely need assistance service guys because I don t what you'll be able to fix it yourself.

• Satellite M40x: Vertical blue lines

  every time when I start a program with something that moves, the display shows heavy graphic failure. Then, if I start any normal program like Word etc I get blue stripes (vertical) even in the system message boxes. If I try an external monitor, the problems are the same.
  so the display should be ok. I have the latest driver from ati and direct x 9 c.
  What can I do?

  Hello

  It's not easy to say what can be the problem. Sometimes this error appears if in the display properties color palette is set to 16-bit. Please change the settings for 32-bit color.

  Hopefully this issue can solve the problem.

  Best regards

• Vertical lines on the Qosmio G10

  My Qosmio G10 have vertical lines on the screen even on monitor external it show the same problems, tried to reformat using the supplied media center disc have the same problem also, system hangs when installing the video driver, try Booting to CD bootable always vertical BACK appear, I hope that the guys at Toshiba can give us a good explanation for this really upset by this problem our company buy 3 this G10 and two of the three have this problem.

  I put t know if you meet here someone of the Toshiba because this community is only a user to user forum, but I'll try to give you an opinion.
  It seems that there must be something wrong on the graphics card on the map.

  You don't have a lot of options... try to communicate with the service authorized in your country guys
  Probably they know something more about it

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Qosmio G10 blue of the lines on the screen

  Hi everyone: -.
  I have a problem with my Qosmio laptop, it was on and when I became a black screen and the system rebooted. Blue lines suddenly appears on the screen (Qosmio logo) point starting form windows is unbootable. I can start in safe mode. I fixed the system, the problem is still there. I saw this topic in the forum, but it was not possible to write a response. could someone please give all my ideas to solve this problem.
  PS: I think I'm out of warranty
  thanx

  Hello

  In my opinion there must be something wrong with the hardware. Maybe the graphics card is malfunctioning. I suggest you contact the Toshiba, because it can make a detailed diagnostic test.
  In the worst cases, we must change the motherboard.

  Good bye

• Qosmio G10-133: the blue lines on screen

  To all those who can help you:

  I turned on my Qosmio yesterday to find a series of unwanted blue lines, distorting the Qosmio logo. Lines and distortion continued until the operating system came at the opening of my office. At this point the whole system locked and the screen went completely blank.

  The Qosmio player suffers from the same problem. The boot system, but crashes when the display is asked to do something.

  I can open the operating system in safe mode, but the lines still appear to a lesser extent on the screen.

  I have run all the tests and has been through the manual troubleshooting section. I tried to reinstall the drives and roll back to the previous facility. But, for all that I try, nothing will change.

  Qosmio my friend did exactly the same thing a month or two it is a. Solution from Toshiba was to replace the motherboard.

  My Qosmio is still under warranty, and I am very happy to send it because Toshiba has one of the best customer service I've had to face.

  But, I was wondering if anyone had any ideas?

  Thank you very much.

  Hello

  I also very pleased with the customer support service Toshiba m.
  I think that the simplest and the best way to resolve this weird display problem is to bring the unit to the ASP. Laptop you is guaranteed to be protected and a replacement is free.

  Good bye

• Qosmio G10: Blue screen shot and later endless reboot

  Hello!

  I found similar topics on this problem, but they were locked and left unanswered.

  My problem is this: I have not changed of _anything_ in the BIOS for a log time. I have not installed new software or hardware lately. And I have not damaged my computer or anything like that. A few days ago I read a Web page when my computer turns off suddenly. It turned on automatically, then it asks me how to restart... count up to normal restart... the blue screen of death... restarts, wonder how... I choose "Safe Mode"... BSOD. I press F8 and try all possible options, but the result is always the same.

  A blue screen indicates: "MACHINE_CHECK_EXCEPTION" or something like that. I'll send more information about blue screens later and more machine ID.

  If someone has any idea what happed and how this could be fixed, do not hesitate to write.

  I can't access Windows and I won't use CD recovery (yet) because I need to save some data to the HARD drive first.

  I say it's all simply amazing. Graphics card a year ago broke down (blue/green vertical lines, fans are going full throttle) and now this! This is the 2nd time in two years when Qosmio brokes suddenly.

  Post edited by: ADMIN

  Ok. Here's some additional context information.

  My laptop Qosmio G10-105, model PQG10E-01D016FSR. After disassembly I was not able to access the windows more - not again. Several times that I managed to get into SafeMode so far, I was able to see the text "Safe mode" in every corner of the Welcome screen, but then it crashes. Once or twice the same in normal mode, Windows on the Welcome screen appears, but then it crashes immediately. In these crashes, blue screen says "MACHINE_CHECK_EXCEPTION" or 'PFN_LIST_CORRUPT' and landfills fysical memory on disk.

  If she does not get there and computer falls down at the beginning (even if the Windows loading screen) it restarts all computer instantly. Sometimes, he does not screen blue but says the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. This error can appear four or five times in a row then it tries to start normally, but blue screen crashes again.

  I can't find any logic in the accident, nor a way to avoid. It seems that various errors appear randomly. I would like to know if it is a crash HARD drive or something else. Other information are also welcome.

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• Qosmio F30-117 - green and blue lines on screen

  Then my F30-117 worked well recently until I turned on and had green and blue lines (kind of like scan lines) straddling the fence.
  I tried to install the new drivers from nvidia, but that has not worked, as Vista comes to pick up their as unknown.

  Anyone who has a solution? Don't you think that the graphics card needs to be replaced?

  Thanks in advance!

  -Eric Zehetbauer.

  You can easily determine what's the reason for this.
  Do you know how?

  Simply connect an external monitor to the laptop and check the top image.
  If you have the same problem on the external monitor, the reason is the graphics card or motherboard, otherwise it s a display problem internal.
  Check it!

  In addition, you should only use the drivers from Toshiba. The Nvidia drivers don't have a for the graphics chip overheating protection could be damaged. It s on your own risk.
  So, try to install the drivers of Toshiba.

• Qosmio G10 does not work - some graphic problems

  Hello
  I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
  Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

  1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
  3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

  Pulling my hair out please help!

  Hello

  > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

  > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
  Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

  > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

  So in my opinion, you should contact the ASP in your country for a control of the laptop.
  Maybe the technicians could find the fault.

  Good luck

• Qosmio G10 106 will not start

  My Qosmio g10 primer not. I am getting white vertical lines on each side of the qosmio splash screen. If I try to boot from the drive, the screen turns white with a cursor blinking in the upper right.

  I can't boot into SafeMode either. One of the suggestions, as the machine is longer under warranty and I suspect that it is maybe the motherboard is dead.

  Hello

  It's not easy to tell exactly what part is wrong, but in my opinion there must be definitely something wrong with the hardware.
  I t can give you an appropriate response to the fault, but I recommend asking Toshiba service for opinion. It should have more experience in these matters.
  The service partner could start some diagnostic tests can locate the fault.

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother

• Purple stripes on screen Qosmio G10 106

  Hello
  All of a sudden my Qosmio G10 - 106 has started to show me purple stripes when I turn it on, it me does not start then I reinstalled Windows on the 2nd partition. This allowed me to start then, but the lines persist. Anyone had same problem and if so, please advise me a solution that I am not covered by the guarantee as it exprired last October.
  See you soon

  Hello

  I recommend you test with the external monitor. If the external monitor doesn't show the same there is a problem with the display and you must contact the partner of service authorized in your country.