Very basic question about how to speed script CLEARDATA.

Similar Questions

• A very basic question about the shared storage

  To implement GR 11, 2 in Sun SPARC 5.10, our sys admins have allocated block devices in the shared storage and they sent us a letter mentioning the disks. This is what looks like their mail
  
  Storage attached with the Node1
  

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  Storage attached to Node2
  

  /dev/rdsk/c5ikdzj2
  /dev/rdsk/c5ikdzj5
  .
  .

  When I connect with the Node1: / dev/rdsk, I see

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  as they have said. Same for Node2
  
  
  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  resistanceIsFruitful wrote:

  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  Not exactly, if you are referring to the names of devices...

  Each core will make a discovery to support when starting. When dealing with the LUN through one HBA (or similar), there is absolutely no guarantee that the nuclei will detect the LUNS in the same order and assign the same scsi device names to them. A LUN can be called device-foo-1 on a single server and device-foo-21 on another.

  In addition, several HBAs will be dual port and dual fiber running channels. So, not only is the same logic unit seen as a scsi device, different number of each core but you can see more than once. Device-foo-1 and device-foo-33 may be the same physical LUN on server 1.

  To solve this logical device name is required. This will be the name of the same device on all servers - and that it will support multiple paths of I/O to the LUN in turn seamlessly. This is done by looking at the unique signature of the SCSI - called WWID or World Wide nameof the software "special driver. With this unique signature, s/w only recognizes a specific LUN, regardless of what server s/w runs on.

  This s/w is called Multipath on Linux, EMC Powerpath and so on. I expect that you will have something similar on your servers.

  Scsi device that is mapped by the kernel to the unit number logic is not used. In the case of multipath , for example, use the + / dev/mpath/mpath+ devices. In the case of Powerpath, these will be + / dev/emcpower+ devices.

  What are the names of device you will use to 11g Grid Infrastructure and Oracle ASM and RAC installation and configuration of shared storage.

• Very basic question about the images in tables

  So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then, I made a table 360 pixels wide by 20 pixels high in DW to make a small nav bar. Then I placed the 4 buttons in the table. Why is - it is showing only 366 pixels wide and when I saw the navigation bar on a browser that the 4th button down to the second line. There is no padding or margin adjustment so I wonder why it isn't an exact?
  

  27/09/06 20:47, "614mike" wrote:

  > So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then
  > I
  > done a width of 20 pixels high in DW to make a small nav bar table 360 pixels.
  > Then I placed the 4 buttons in the table. Why is this it is showing only 366 pixels wide
  > and when I saw the 4th button browser navigation bar falls down to the
  > second line. There is no padding or margin so I wonder why it is not a
  > exact fit?
  >
  >
  In fact said 0 padding and margin 0, or are you assuming that
  There is no padding or margin because you do not specify any?

  Most browsers use a padding by default and margin applied when you
  don't specify anything whatsoever, and it varies from a browser. Try
  specifying 0 padding and margin 0, if you do not already have.

  --
  Ghizlaine

• 2 very simple questions about 6225 PCI card

  Hello world

  I use for the first time a card PCI of 6225 (80 all entries). This card is linked to two junctions of SCB-68 block and my goal is to use it to acquire 40 Equations signals. Using the wizard DAQ, I came to these conclusions:

  1) the first 8 of my 40 Equations entries go out first to a block?

  (2) the block junction n ° 1 for each differential signal, I need to put a bias resistor 10 kohm between each AIGrnd and the V (-) signal. That's what I did with the other cards X 622. To do this with block n ° 2 too, I have that pin n ° 22, 9 and free to use all of my 32 43 signal. Is this correct?

  I know that these are 2 very basic questions, but if someone could just answer for confirmation, it would be great.

  Thank you very much

  Kind regards

  User

  Hello

  (1) the 8 first entries go to the 1st exit of block as this pdf for Connector 0 shows.  For the last pin of the Connector 1 you will find the information in the screenshot below:

  

  (2) according to your source impedance, you must connect your source as described in figure 4-5:

  

  Or 4 to 6 of the l M-series user manual(page 4-15 to 4-18, so with a coupled polarization resistance also between the positive terminal of the source and AI GND).

  Then if you have a noise problem, you can follow these documents:

  How to eliminate ghosting of my measurements?
  http://digital.NI.com/public.nsf/allkb/73CB0FB296814E2286256FFD00028DDF?OpenDocument

  Reduction of the impedance of the Source of an analog input Signal
  http://digital.NI.com/public.nsf/allkb/CF83426BC3AC514A86256C10005A4771?OpenDocument

  With the help of a Gain (voltage follower) unit with DAQ hardware buffer
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4494

  I hope this helps.

  Kind regards

• Basic questions about the port of Vsphere mirror

  I set up a lightweight VM that would deal with inter-VM traffic. To do this, I want to activate the duplication of port between virtual machines.

  
  

  I have ESXi 5.5 Update 1 installed, use the Vsphere (no webclient) client. I see no duplication of port capacity on my Vsphere Client

  

  I have some very basic questions:

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  (3) exist what API to enable/disable/setup Port mirroring?

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  Because the mirror of port requires a distributed switch, you will need to vCenter Server and once in vCenter Server, you can the vSphere Web Client of the user or the vSphere Client (c# version).

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  You can download the server vCenter Server (60 day trial) and you'll have an Enterprise Plus version for your ESXi host vSphere.

  (3) exist what API to enable/disable/setup Port mirroring?

  Check the comments of this blog: http://blogs.vmware.com/vsphere/2013/01/vsphere-5-1-vds-feature-enhancements-port-mirroring-part-1.html

• Entities does not Contribution - very basic question

  Hi guys,.
  
  My apologies for this very basic question: I am very new to Hyperion, with just one week of training! Anyway, I'm building a basic model and have noticed that my features are not in the dimension value roll altogether the [Contribution]. This means that entities do not roll upwards!
  
  It was suggested that problem was that I needed a Sub consolidate in the rules, but I put the attribute 'ConsolidationRules' = n. In the documentation it is defined as "N to use the consolidation by default and eliminations".
  
  I was wondering is there anything else that is needed to use default groups, or do I need to create rules?
  
  Thank you
  G

  Why do you think that's not driving? If your building rules are set to "n" you don't need rules.

  Make sure that your presentation was made to IsConsoldiate. Make sure that you're displaying a "Parent.Child" to total Contribution.

• Basic question about using Eclipse

  IM using RH9 to create help for use with an Eclipse plug-in. I use the EclipseHelp Generator.jsx without any problem. The problem I have is probably very basic, but I have not found the answers up to now: I would like to include a hyperlink in one of my subjects to an Eclipse help topic that exists outside of my project. I thought that I simply copy the URL I see section target (found via the properties for the topic of the target):

  

  Of course, I was very naïve. I now understand that IP address is actually a loopback address, which is useless for the creation of a hypertext link.

  My question is, how do I create a link? In other words, what address information can be used instead of the loopback address that will allow such a link to work?

  Am I barking the wrong tree entirely? Any help would be greatly appreciated.

  Thank you!

  -lc

  Thanks again, Anjaneai.

  After reviewing the situation, I realize now that it's a bad idea to try to link directly to other Eclipse plug-ins documents for a variety of reasons. Its a bad idea and therefore does not at all. I appreciate the attention - thank you.

• Very basic question I think?

  Hi im very new to flash, but I'm looking to learn more about it, I tried to use the pre-built Flash components and I was just wondering where and how you can retrieve the values in the boxes checked
  
  I know how to check using the 1 box
  
  If (instancename.value = true) {}
  trace ("box has been checked");
  }
  
  but I want to run through a series of 5 boxes and retrieve all the labels in a first time, I can probably work on verification, if they are checked, but all the I get filament is not set which, I guess, no value.
  
  This is the code I used to try to recover all the labels of each box at the press of a button
  
  We (Release)
  {
  trace ("clicked");
  var i = 1;
  
  While (I < 5) {}
  trace ("Running while");
  i ++ ;
  trace ( check box. Label);
  trace (i);
  
  
  }
  
  }
  
  It would be more appreciated if someone could point me in the right direction for tutorials very basic on the flash components that I could find only the macromedia livedocs that I have not found a lot of help as his technique to speak which I am not yet familiar with...
  
  Thank you Pinky
  

  Hmm, I hate these sensitive submit buttons when they take too long to process your response if you click it again and it deals twice so it seems you spamming the forums: S lol

• (Basic) question about layers

  Hi all!

  I'm a little Photoshop-beginner and I have a question about layers, just as the title suggests. I have a bunch of PNG files which are the design of what happens in the UI (user interface) for an app Anyhow, I need to break down each graphic element in the files (for example, the logos, the "buttons", the small images) in different layers. How this is done more efficiently?

  Any help would be much appreciated and I hope that I have explained the task well, but if you need additional information about the files or the task, I will be happy to provide that.

  Thanks in advance,
  EM

  Use the Quick Selection tool to select each item and then press Ctrl + J (Cmd + J) that will create a separate layer. You can select with the rectangle selection rectangle if you want straight borders. Each item will have a transparent background which will allow you composite with other pictures or blank documents. Click on the symbol of the eyeball in the layers palette to the right to turn on and off and then you can view layers individually.

• Basic question about ESXi networks

  Hi all

  It may be a very simple question for you but I am new to ESXi and I need your help.

  I have a configuration of ESXi envionrment like that.

  192.168.1.200 - ESXi Server

  192.168.1.50 - a Linux machine

  192.168.1.60 - a Windows 8.1

  ESXi server connects to a router and the network is 192.168.1.0/24.

  The topology just like that.

  

  My problem is,

  1. I have a Mac machine connect to the same router. There is a web interface built into the Linux box. Can I use the Windows 8 to go, but I can't use the machine to physical Mac do. The firewall is off turn in ESXi already

  2. How can I make the two machines able to access internet?

  Thank you!!

  After taking a second look at the configuration of the network, I have seen that you have configured a VLAN ID on the port group. Assuming you are using a router not supported (i.e. without ports trunk/tag), this may cause the problem. Please remove the VLAN ID to see if that solves the problem.

  André

• Very simple questions about DPS

  I have a few questions about the tools and DPS.

  
  

  1. What is the difference between Folio and DPS Article?

  I think that the two format have a fixed layout. I don't understand difference and the merit of the Article of DPS.

  I want to know why the Folio was disappear and replace by Article of DPS.

  
  

  2. I want to know that all publish root of DPS. (ex.) App Store for iOS, Google android game and..)

  I know that I can make the app, iOS, Android, and windows for each stores with DPS.

  If I want to publish to the Kindle store, iBooks store, store kiosk to newspapers or on the Web site, I don't need using DPS?

  3 if I want to book recomposable (like reactive Web site), I shouldn't use InDesign?

  Is there a process for making recomposable document with InDesign?

  can I use text editor, DW or muse? (such as the manufacture of the normal site)

  I want to know the standard method book recomposable.

  
  

  Sorry for my bad English.

  1. I know you probably talk format but essentially, a DPS classic folio is now a collection, the items in the collections are always content

  2 - iOS, Android and Windows platforms that you can publish on are

  -We do not support the Kindle store

  -For book content type, you want to use the ePub format, please see the following links:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/digitalpublishingsuite/PDFs/DPS_and _ePub_FAQ.pdf

  https://helpx.Adobe.com/InDesign/how-to/eBook-fixed-layout.html

  3 - InDesign has the ability to create recomposable ePub

  See this tutorial: https://helpx.adobe.com/indesign/how-to/ebook-fixed-layout.html (with exercise files)

  Hope that helps!

• Very basic question :) in the forum

  :)
  
  I don't know her like a basic question, but struggling to get this straight all in detachment.
  I just wanted to know the steps to connect the text into a hyperlink when validating responses...
  
  If someone can solve the example: here_ "go-ahead" should be a hypertext link and the link should point to google.com
  
  See you soon,.
  Manik.

  Something like this:

  [url http://oracle.com] Oracle

  How to write on it?

  [url http://oracle.com]Oracle[/url]
  

• Basic question about Flashback Database

  
  Hello

  I have a very generic question on the use of Flashback Database.

  On my systems tests, for use in testing and simulation performance, I want to create a guaranteed restore point so I can test impact on lot when releases of code changes are made before production deployment.  My confusion is in what regards newspapers of restoration, which are summarized in the following questions:

  1. is it possible to change the redo log files, when a guaranteed restore point has been configured?

  2. If so, is the Flashback to restore, point also change the size of the logs again?

  I found nothing in the documentation on this subject... Where my question...

  Appreciate your time taken to answer these questions...

  Kind regards.

  Hello

  donneskold wrote:

  Hello

  I have a very generic question on the use of Flashback Database.

  On my systems tests, for use in testing and simulation performance, I want to create a guaranteed restore point so I can test impact on lot when releases of code changes are made before production deployment.  My confusion is in what regards newspapers of restoration, which are summarized in the following questions:

  1. is it possible to change the redo log files, when a guaranteed restore point has been configured?

  (1) Yes it is possible.

  2. If so, is the Flashback to restore, point also change the size of the logs again?

  (2) it will not change the size of the redo log file.  Cannot resize a redo log file...

  I found nothing in the documentation on this subject... Where my question...

  Appreciate your time taken to answer these questions...

  Kind regards.

  Thank you

• The basic question, but how can I get a third pary widget in muse

  I'm really embarrassed to be asking this question, but how do I get a third free or paid for the widgets in Muse.  I've lost hours trying to do and I'm sure it's myself, but I can't see it.    I downloaded the area under the team tab and classic tab box, but there is no way I can not install them in the library of widgets or place them on one of the pages of my site.  If I had hair left I would be pulling it.

  Any help would be appreciated.

  Download the widget and double-click it.

• A question about how to make something similar to a Navigation bar?

  Hi guys, I'm sorry if this has been asked before, I just completely sure what I was looking for!

  Well, I think my first official for the company website that I work.  I was curious about how to make a navigation enough image size, with a little information and a link visitors could click to learn more.  I don't know what this method is called or where to start to create a!

  I was certainly not specific, but I don't speak of something similar to www.nationalgeographic.com.

  At the top of their page, they have a daily news thing, when you click the numbers, it takes you to a picture and a sentence of information and a link at the bottom left for "More".

  That's what I was looking for!

  I hope you guys can help me, thanks in advance!

  Adobe Exchange has several cool widgets that you can use.

  http://ALT-Web.com/demos/Spry-test.html

  You will need to install Adobe area to use the browser Widget ~ installed from the link below:

  http://labs.Adobe.com/technologies/widgetbrowser/

  Log-in to Adobe Exchange to enter & configuration desired widgets.

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/