very bug and makes every thing els buggy

Similar Questions

• I have my laptop fotmatted how to get every thing? I did a sync account and downloaded every thing it before formatting.

  I did a sync account and download every thing on the server and to be sure I download twice, then I formatted my laptop. When I tried to put all the data, I can't. I put my username and password but nothing has changed. How could I come back all my passwords and bookmarks with all the data? use firefox more than 3 years, so it's hard to remember all the passwords. Please is there anything to get back them?

  Hello da3karis and thank you for contact us,.

  You must have created a before unlock code so now, you will have less problems to set up synchronization.

  Well, while installing Firefox Sync, say "I have an account". Choose "I do not have the other device. Type your password if you remember, if there is a link of recovery. Once you have your password, choose 'I lost my device' and follow the steps on the screen.

  This solve your problem? Please report to us!

• Satellite A500-025 - optical drive runs very fast and makes the laptop

  Just bought PC toshiba A500-025.

  When I put in some disc in the optical drive, it runs very fast and makes the phone vibrates.

  I was told that there is a toshiba utility that detects an imbalance in the disc and slows down the speed of the drive, but I don't know where to find this software utility.

  Thank you.

  Hello

  I think you mean the acoustic silencer
  As I remember, such tool was available for some laptops with pre-installed Win XP or Vista.
  For example; the acoustic silencer was available for some of the Satellite A200 and you could download this on the European driver Toshiba page.

  To be honest, there s nothing unusual that the CD/DVD drive runs very fast for a few moments, this happens in my portable two different.
  The STRANGE turns very quickly for a few seconds after the CD has been inserted.
  This happens because as the research of windows OS for the content placed on the disc

• cannot pair look on the phone was very good and makes everything I don't need help

  my Apple Watch re - will pair not to my iPhone 5 c was fine and just went off I tried everything I know manual I tried but only to give me 5 digits and he needs 6

  I've been trying since 08:00 this morning no chance need help, my watch is 7months old exploded b4 but matched ok.

  Hi, Dorothy

  When pairing manually, you need to tap your iPhone when it shows the name of the device (which includes a five-digit code) on your watch:

  

  Your watch then displays a six-digit code, you will then enter on your iPhone:

  

  More information:

  Set up your Apple Watch - Apple Support

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  I made a new document (72 dpi, preview mode: by default) and I tried to see if it's the same thing on another screen, and it is.

  I thought that the problem would be with the 'align on the pixel grid' property but by activating / deactivating it doesn't matter. Maybe it's something with anti-aliasing? "Work of anti-aliasing" is checked in my preferences...

  

  Here's an example, zoom level 100%.

  The forms do not look sharp at all. No idea what this can be?

  Lieselot,

  Or you can try to switch between the GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• all design pages suddenly have an orange for them cast as a pass filter above all. Preview mode seems to not be affected. Put in quotes in some texts and Bam! every thing is orange.

  All design pages suddenly have an orange for them cast as a pass filter above all. Preview mode seems to not be affected. Put in quotes in some texts and Bam! every thing is orange. What is this and how do I get out of it.

  Go to the menu "show/hide grid Overlay.

• If we are in CC, can we give older PS and LR programs on disks and make sure that they can be used by someone else?

  If we are in CC, can we give older PS and LR programs on disks and make sure that they can be used by someone else?

  Gloria

  Transfer (sale of your software) https://forums.adobe.com/thread/1355892

• I'm on a MAC OSX 10.9.5 and using LR 5.7.  I lost the base of 'Developing' Panel (saturation balance & white in color).  How can I get that back?  Every thing seems to be in place.

  I'm on a MAC OSX 10.9.5 and using LR 5.7.  I lost the base of 'Developing' Panel (saturation balance & white in color).  Every thing seems to be in place.  How do I get it back?

  This is one of the most frequently asked questions in this forum. See this.

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• Open tabs which unused for a few minutes is no longer working and make me lose the page on what it is.

  I like to keep an eye open at all times, and Firefox has recently begun to spoil my tabs while I've never had a problem with this before. I think it started after the last update of Firefox.

  As mentioned above, if a tab remains open but unused for a few minutes while he was working in the other tabs, logo of the site next to the title of the page (for example Amazon 'a' logo with the arrow below "Your orders" for example) is replaced by the green rotation ring that usually indicates the loading, but it runs a lot faster that it did when it actually does something. When you click on the tab to open it again, it's just a blank tab and I have to manually track down the page that I was again. However, when I disconnect my computer or restart it so that the legs have the rings of green spinning on them, the next time I open Firefox once connected to my computer, it opens all tabs and the correct pages, but that if I did not click on / open one of the tabs so that they had the ring of green rotation thus making their return to blank tabs. If I click on a tab with green spinning ring (making it empty), then log start/stop and reopen Firefox on connection back to my computer, Firefox will have indeed lost the information on the page and he re - opens in a blank tab, as it was when the system is disconnected. On top of that, if the tabs are doing this fast spinning glitch green ring, he did everything I'm working on the slow race, such as making a video shift watching on Youtube. If I see that happen, I am obliged to go click on the tab (loss of his data in the process) and manually go back to the page, that I was still just once so that it stops make the green ring of fast rotation and I can watch my video smoothly, but it lasts only a few minutes before these pages start the glitch green ring once more and I have to repeat the process. Another oddity of the note is that this only happens to the tabs actually, I click on and open during each session. If I restart or disconnect my computer and connect again and restart Firefox, the green ring glitch does not reach one tabs I don't touch during my session. It happens to the tabs that I actually open this session, but it happens to every single tab that I do, I opened this session.

  It becomes very irritating and it's working in Firefox a huge concern, as happens constantly. Please fix this. Firefox has never done this to me before, so I don't understand why it's happening now. I have not downloaded or installed the new plug-ins or add-ons for Firefox, so I know I did nothing to the program to cause this.

  Thank you for picking me up in it. I look forward to hearing back as soon as POSSIBLE and to find a cure for this problem. This glitch is driving me crazy.

  The current versions of Firefox use the sessionstore-backups folder to store a few copies of the sessionstore file to make it possible to recover a few errors caused by a bad closing down.
  The 'upgrade.js with the attached version identifier are created when Firefox is updated.
  Previous versions of Firefox created the file sessionstore.bak with the attached version identifier.
  So that look OK.

  You can start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Could you possibly post your troubleshooting data?

  • https://support.Mozilla.org/KB/using+the+troubleshooting+information+page

• Black window bugs and crashes and falls down, and WHAT's the PROBLEM?

  First of all, I thought the problem was that my employer still uses Windows XP, with layers of custom on top security. But it happens at home, on my netbook XP vanilla.

  So I thought that the problem was of XP, which is, after all, obsolete. But now it happens on my brand new laptop weeks running 64-bit Windows 7 Professional.

  Here are the problems:
  (1) for the recovery of the standby mode or when I plug it on a second monitor, or even just to have the display closed briefly, Firefox fails to redraw the contents of the window. I just get a black window empty until I have resize or force a refresh. NO OTHER PROGRAM I USE HAS THIS PROBLEM.

  (2) Firefox sometimes do not redraw little matter what I do. I just had a completely black window, and when I clicked on the close box, a msgbox jumped up, completely black inside, with a title like: "are you sure you want to close? I could not see even the 'yes' and 'No' buttons, and clicking on where they are usually did not work. I ended up closing by pressing the Enter key.

  (3) sometimes these problems are accompanied by a small vestigial micro-fenetre, which has no content, no close button and no control resizing. Is this nothing window with no title, but the title bar is long enough for characters may 20. The last time this happened to me, nothing window had a cursor flashing text inside, but typing had no effect. The only way to get rid of the micro-fenetre is to close every single instance of Firefox and wait about 20 seconds. Then it disappears on its own. Sometimes it appears on its own without the black screen problem.

  (4) all my favicons disappear when I updated Firefox on my work XP computer, and they refuse to come back, even when I revisit Web sites.

  Computers involved are:
  Reference Dell E4200 running Win XP Pro
  NetBook Acer One Win XP family
  Vostro 3350 running Windows 7 Pro

  All 3 computers running Norton Security Suite (The E4200 runs a care company, the other two are conducted in free version of Comcast)
  And all 3 computers were connected to a video Displaylink adapter USB (for a 3rd screen) at one time or another, which means that the driver is loaded on all computers, but these problems occur without any external monitor connected at all.
  Everything else is pretty vanilla.

  I get these questions every other day or two and it is really starting to annoy me and make me worried that Firefox is unstable, with me afraid that no matter what unsaved work or even data from my hard drive may be at risk.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.