Very low emission Qosmio F50

Similar Questions

• Qosmio F50-125 - yield is very low

  I purchased a Qosmio F50-125 and right out of the box, it runs as a piece of junk. Everything is a little slow, when I boot it and it goes to welcoming screen, it says "Please wait" then 2 minutes.

  But worst of all is that everything is a bit slow and jerky when I surf the Internet. If I try to watch a video on youtube, it's a slide show. I downloaded 3d mark 2006 and with this map graphic, I should get about 7800 but I get only 3800. His true annoyng and I can't understand what could be the problem.

  Thing is that I bought the computer in my home country (Serbia) but I am now in France and will stay here for at least 4 months, so I can't take back. Any1 got clues about how to solve this problem? TX.

  Hello

  Friend of me a Qosmio F50 and he is very satisfied with this laptop and I only can it s very fast and doesn t do it no problem again.

  Anyway, all the time long start, you must check this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/FAQ9401B10001R01.htm

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  You have yellow exclamation marks in Device Manager?
  Can notice errors in the Windows Event Viewer?

  Slow performance can also be caused of internet security software. What software do you use? I recommend AntiVir.

• Qosmio F50 - 10 M - infrared driver for Windows 7 64 bit missing

  I want to change my OS from VISTA (32 bit) to Windows 7 (64-bit), I'm on downloading all the drivers needed for the proper functioning of my laptop in the future.

  When the choice of my laptop (Qosmio F50 - 10 M) and operating system (Windows7 - 64 bit) there is no more infrared driver (for my remote).

  Do I need to have a driver for the infrared interface (which I have and is downloadable with VISTA32)?
  If Yes, where can I get it?

  Thank you very much for the help!

  Kind regards
  starmind

  Hi Starmind_1,

  I n t have remote to test my Qosmio F50 so that I can t but if there is no driver for Windows 7, I guess that the 64 bit Vista driver should work fine on Windows 7. In addition most Vista drivers also work on Windows 7 so it s worth a try! :)

  But from my own experience, I can say that Windows 7 64 bit works like a charm on Qosmio F50 and in my opinion better than Vista. I used all the drivers from the official website of Toshiba and don t have problems.
  Everything works great! :)

• Qosmio F50 - black screen on startup

  Hello

  I have a Toshiba Qosmio F50 and something very wired that happened to me today, I was just on the internet and I got bored so I took off the laptop.
  After maybe 10 minutes I restarted it upward and the screen is all black, I can hear the cell phone that works but the screen is all black and I tried to connect to a monitor and he won t do anything, even with the HDMI port.

  Any help is welcome
  Thank you.

  Try please to start several times to see if the same thing will happen again and again.
  After start the leave during a period of time see if you hear the typical sound of windows operating system starts. Then try to use the FN + F5 key combination to see if you can switch to the back of the office.

• Little help for a Qosmio F50 and win 8 is required

  Hello

  I have an old Qosmio F50 and since he still has enough power to manage Windows 8 I decided to give it a try. What I did is a clean install of WIN 8 x 64 pro and I used a mixture of various models of Toshiba drivers and third parties. The results were not bad, since everything works except for a weird thing.

  Specifically, I used:
  -Drivers of the Chipset V, 9.4.0.1022 directly from Intel.
  -V with Toshiba HD processor driver, 1.0.2.71
  -Enecir v. 2.7.4.1 drivers
  -Realtek High definition audio drivers R271
  V battery Bluetooth 8.00.12 (T)
  -VGA Nvidia 320.49 drivers
  -ALPS V8.x0.303.206 drivers for the touchpad
  -Camera assistant software v 1.7.260.0526L (a bit unstable and settings reset every now and then, but always functional.) The most recent camera app couldn't handle the old Chicony)
  -Everything was provided by Windows Update.

  And finally, I used:
  Toshiba 1.00.6626.06 function key, cards Flash 1.51.8.2C (version b) .and v.1.3.3.64 SpecApp.exe (aka the button support)

  The only problem I have is with the touch media buttons. While working as it should and I can remap them with the SpecApp.exe very well, they do a crazy thing:
  Sometimes, as well as the proper functioning of the button will open also calculator of windows which is quite annoying. I tried many things including the search in the registry, but I couldn't find a way to solve it, so if someone could help that would be great.

  Other than this problem, everything works just perfect, including all FN keys.

  Thank you for reading and if you have an idea I'm all ears.

  It is always a challenge to such experiences as new installation OS on an old machine and unsupported. Let's see if someone else with the same machine had success with Win8.

  Anyway, there is always something that will not work correctly. The key is that most of the stuff works well, so if you will not be able to find the solution for touch buttons, in my view, that it's not so bad.

• Qosmio F50 - the hard drive recovery?

  Hello

  I had a very big problem.
  I've made a few changes with my Vista regs and then I was unable to start again.
  So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.

  Well, now problem - everything was going well, but when I walked into the Vista installation I had to shut down the computer.
  Now, when I start up the pc and load Vista I message I need to reinstall my computer again.

  Well, they say nothing about how load the recovery file but I have no option for this - only emergency mode, with the support of network, etc., but without recovery emergency. Moreover, when I select emergency mode, I can't load Vista-it says I need to run the Setup in normal mode, which told to re - install. Yep, circle-_-.

  Model: Qosmio F50

  Do you think that when I erase all the Vista disc manually - for example with linux, and then start the computer, I get a possibility to load the second part of the drive to start the installation?

  Thanks in advance because I'm really despair

  Hello

  > So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.
  I'm a bit confused of m.
  How do recover you the laptop?
  Have you used the Toshiba HDD recovery option which could be launched by pressing F8, select fix my computer-> Toshiba Recovery?

  Usually, it is a procedure how to start the Toshiba HDD recovery.

  I guess you didn't create a recovery Toshiba drive in the past is good?
  It was a big mistake buddy because the recovery disk would help you in difficult situations

  Well, as I said above; You can try to start the HARD drive recovery. If this will not help you I think that you would need a Toshiba Recovery disk.
  You can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Re: Qosmio F50 - new display driver for Vista 32 bit?

  Hello

  I just want to ask you if it is not no matter what most recent display for my laptop driver: Qosmio f50 - 125 K - vista windows 32 that on the Web page is very old:

  Date last modified 07/28/08
  NVidia company
  Type display driver

  Are there any recent?
  Thank you

  Hello

  This seems to be a newer driver for this laptop.
  Of course you can use the drivers from other sources such as laptopvideo2go.com page but these drivers can be used only at your own risk because these drivers does not control the GPU heat dissipation and could lead to damage GPU.

  Welcome them

• Qosmio F50 - 10Z revolves around 80oc degress

  Hi guys,.

  Have a very little bit of trouble with my Qosmio F50 - 10Z, the GPU (9600M GT) revolves around 80 ^ o ^ c degrees when using, the system has been cleaned with air compress and is in perfect condition of the art, I use the laptop on a table computer as well to ensure air flow.

  Thank you very much.

  AFAIK Qosmio F50 is old enough laptop model and if you use every day on base maybe is time for cleaning professionals. Compress the air is OK but more of dust is just inside and cold air and cooling rack may be blocked by dust.

  I've seen repeatedly disassembled portable and it is raise what it looks like inside after two or three years of use. In my old notebook I found cat s hair.

  What is with cooling fan? It runs at maximum speed?

• Qosmio F50 - thickness required thermal sheet

  Hi all

  I have Toshiba Qosmio F50-108. (9700M GTS)

  I intend to change the thermal paste on the CPU and VGA.
  In order to so I see that there are also thermal sheets on RAM chips.

  Does anyone know the thickness of the people?
  The sizes I can buy are 0.5 mm 1.0 mm 1.5 mm

  I can open it and measure but it will be the nuclear option :)

  Thank you very much

  Hello

  I think you mean the PAD VGA NB CATERON part number: K000064710
  There is also a CHOCK PAD part number CATERON DDR3 VGA: K000064720 available.
  I also found this part of thermal grease number 776: K000055600 is also used between the cooling module and chip.

• Qosmio F50 - 133, infrared non-operational

  I have a qosmio F50-133, in which, after a new installation of license Windows 7 (upgrade Toshiba) I can t use the built in infrared device.

  I use infrared communication with multiple devices, it is therefore a very important communication port.

  In addition, in the settings folder of device (under computer/device settings) it s nothing information bad and there, under devices of human interface, a correct installation of the IR receiver ENE CIR HID and Microsoft ehome transceiver

  Can you please help me solve this issue!

  As far as I know, after completing the upgrade Toshiba you must insert composite CD again to install the missing drivers.
  On the Toshiba download page, I see driver infrared listed for Win7, so try to reinstall Vista version 2.5.0.0.

• Qosmio F50 - 10K - multimedia keys are not lit

  According to my topic

  "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

  I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

  In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

  Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

  Hi Jwrath,

  I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the VAP, restart the computer and install the new VAP software.

  In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

• Qosmio F50 - Fn + F8 does not

  Hi all

  I have a Qosmio F50 - 10Z. Everything worked fine when I got first it - a couple of years now. But at some point the fn + F8 rocking has stopped working so that it can no longer use the wireless connection.

  He used to switch between the different symbols, I would choose "All On" and he would happily link. No symbols appear now, so I can't connect wirelessly. The wireless forward button left of the laptop working (turned on) and sometimes, if I do a reboot to safe mode, it can connect wireless on its own.

  You can probably guess I am quite technical, although I tried a lot of things on the net, I'm puzzled. If anyone has any advice, I would be very grateful, it's driving me potty stuck upstairs in the back room!

  p.s. the other fn keys work

  Hello

  As you probably know n t, the VAP (value added package) and the Support of Flash Card Utility control the FN keys.
  I recommend first to refresh the memory Flash Card Support utility.
  Go to start-> all programs-> Toshiba-> Card Support Flash Utility-> restart

  If this does not work, reinstall the Flash Card Utility Support

  Good luck

• Qosmio F50 - weird theyr then freezes

  Hello

  I have a Toshiba Qosmio F50-108 for about 3 months and all of a sudden, now brands laptop a few strange noises (like whistle 2 times) one of them freezes.

  After that restart using the power button it works very well for about 4 days and then again the same problem.
  I thought that maybe it's specific software I have spin, but that is not the case, that the laptop freezes even if I am not under what either. I also ran some anti virus and the laptop is clean.
  Also, I checked with memtest and everything is fine if it was bad memory.
  What do you think is the problem? Bad hard drive?

  Thank you
  Panas

  Of course you can try it with the Seagate tools too.
  The Drive Fitness Test is just one example or let s said one of the many programs. I know only the Seagate and the Hitachi Test.
  Other programs are know for me but if you find another post. I'm interested in it.

  These tools are unable to solve the problem. If the HARD disk is defective or not, they can only diagnostics. If you get an error, you need to replace the HARD drive.

• Re: Qosmio F50 - 11Y - what Dockingstation with HDMI output that I can use

  Hello world.

  I'm a newbie here and I just bought the Qosmio F50-11y of www.play.com this morning. Really very happy and look forward to the delivery now. I've been hunting for a laptop for more than five weeks, and as soon as I spotted this laptop I went just for her!

  Just wondering if anyone knows a good station of this laptop in particular. I saw one with a DVI and one with a VGA output on the Toshiba site, but I want one that has HDMI and if possible TV out too. Thank you

  Ground

  Hello

  The G50 cannot be connected to the docking station.
  There is no slot at the bottom of the unit that allows you to connect the docking station for the G50.

  Welcome them

• Screen not switch on the Qosmio F50 - 10Z

  Hello

  Recently, I received my laptop Toshiba Qosmio F50 - 10Z (yesterday), I am very pleased with. However I seem to have a problem with the screen does not reverse when you start the laptop in sleep or hibernation mode. I tried to change the output screen (Fn + F5) but it makes no difference, and the laptop screen is always off. I need to cut my machine (5 seconds by pressing the button / stop) and restart manually. Then, the screen lights up again.

  It doesn't seem to be drivers updated compared to those I already have / preinstalled.

  I hope someone can help solve my problem.

  Thank you

  The story is really strange for me also
  I'm 100% sure that Toshiba provides new laptops and if you bought a laptop with a few scratches then you should blame your laptop for the same problem dealer

  Maybe the dealer of the laptop used this camera for a show or similar

  Welcome them