Very low yield, 256GB SSD Sandisk Ultra plus

Similar Questions

• SanDisk Ultra Plus, I have some concerns and Questions

  Well, I bought this at Wal-Mart todayanDisk adapters Ultra Plus SAFE-1 card with adapter (SDSDQUIP - 064 G-AW46).

  First of all, I can't find this card anywhere, and even though I bought it at a Wal-Mart, is not on the website here either.

  And I didn't buy the last one either.

  When I look on this site for it, the closest I can find to him is the SanDisk Extreme.

  The SanDisk Extreme has:

  • Playback speed: up to 80 MB/s
  • Write speed: up to 50 MB/s
  • I say this, this is the card that I buy a speed up to 80 MB/s * 533 X.

  And the UHS-1 card with adapter SanDisk Ultra Plus adapters:

  • Playback speed: up to 48 MB/s

  This card would have extreme firmware more about it?

  Or is it a special edition?

  Here is a reference of Crystal disc brand I did on this topic until I put it in my LG G4.

  Used for the test: 2000-2C29WM, AMD APU E2-1800, 8 GB HP laptop. DDR3 Ram, Windows Home Premium 10:

  

  Hello

  in this case you can't find not the new version of the ultra card on the sandisk Web site because the site was not being updated yet, however the 80 MB/s is the most recent map version and the far more with 80 MB / s is the previous version of the map.

  For more details on how and why you can also get in touch with sandisk support directly who can answer your questions on the map

  Here is the link to contact

  http://www.SanDisk.com/about-SanDisk/contact-us/

• The SanDisk Ultra Plus 64 GB sdxc card memory not recognized by PC even if PC shows these letters to front

  SanDisk memory card Ultra Plus sdxc 64 GB not recognized by PC even if PC shows these letters on the front of the hard drive. From time to time I can get it to recognize the memory card but mostly not. Then I manually to the top of my camera (Canon T3i) onto the PC and make my photos to the PC camera is very heavy! Does anyone have this problem? I can't find anything online that answers my question. TYIA solution to anyone.

  Simple solution is to buy one of these small memory card readers.  Costs about $5.  Plug the memory card on it.  Plug it into a USB port.

  If still not recognized, the memory card must be reformatted or replaced.

• Impossible to format my Sandisk Ultra Plus 16 GB MicroSD

  Hi, I bought this product about an hour ago from Bestbuy. It was sealed in his case, there is no way, it was a homecoming.

  When I insert the SD card with the inside microSD adapter to my computer, it asks to format the drive. Then the Format Windows removable disk appears and says that my card is 30.6 MB... When I click on Start to get in shape, with the default given the options, it returns back that it is impossible to format.

  I tried the SD Formatter 4.0 card. He says that it is write protected, even if the switch is not in write protect mode.

  I have a MicroSD USB Reader. I tried this way too, and it does not work.

  I would like to get assistance.

  I found my problem.
  As well my card reader USB MicroSD and SD of the laptop slot could not format/read it. I don't know for what reason. But they were a couple of years.
  Today, I bought a new card reader. I could open the drive very well and format.
  Hope this helps some people.

• SanDisk ultra II 480 GB ssd update for macbook pro 2009 (5.4)

  Hi, this is not a question but just some information that I wanted to let down as I was cultural for this search but could not find any info anywhere here or elsewhere online...

  My 6 year old, 250GB internal hard drive died and I decided to replace it with an ssd, after looking at all the options and additional information about compatibility issues, problems of crash/stand etc. I decided (without a clue and fingers crossed) with the sandisk ultra II ssd 480 GB

  So far so good, the mac works amazingly fast, no el capitan osx installation problems and no problems with SATA speed negotiation, turns the 3gps. It is like having a brand new computer!

  Conclusion: upgrade 100% recommended

  

  I recently took a similar decision for my Mac Pro Tower silver server, install two 960GB SSD of this manufacturer (Sandisk).

  The SATA 3 G bps Bus SATA Mac's limits you to a maximum of about 375 M bytes/second. Although this is a little slower than maximum speed than the SSD applications (on the order of about 500 cases of best M bytes/s), it is still fast enough.

  Improving the speed on a rotating disk is so great, it is certainly useful.

  Make sure that you activate the TRIM on your SSD. If ongoing 10.10.4 or later, you can use the Terminal command:

  sudo trimforce enable

  (your password is not included, you will be notified that it is serious, and a reboot will be once the TRIM is activated).

• SanDisk ultra fit 128 GB of low size, slow and defective

  I just bought 3 USB keys at amazon. A 128 GB PNY (very fast) and 2 Sandisk ultra fit (32 GB and 128 GB). The Sandisk 128 GB must errors about 114 Go in 115 GB of total space. I plan to replace with amazon, but wonder it is possible to download some software from Sandisk to try to 'fix' the faulty unit. I've never done this before, where my question. I read on some overheating problems on this forum that could be the cause of the cells fried in flash. I don't know anything about, but it raises concerns about the ability to keep the camera steady for the 5-year warranty you provide. I have reflected on a downloadable software on your Internet site for repair, but found none. Could you please answer to, it is possible to fix it or if I better return it for a refund and get another brand or maybe even just a simple replacement. Speed of 4K of the 128 GB it is half that of the 32 GB (read and write - 3½MB/s against 7 Mbps and 2 Mbps vs. 4 MB/s). Usable storage of 128 GB of Sandisk's 115GB. The PNY 128 GB usable storage is 126 GB. The issue of size is of no interest, just raise it now that I had a problem. However, the issue of speed could be linked to the flash error and raise a few red flags.

  Thank you

  Kasper Lindvig

  I'm not aware of all solve this software for your problem, and even if there is I would not recommend it for a new purchase.  What you bought seems to be used or defective and I return it.  And I would buy one that follows from a different source.

  You also have the option to send it to SanDisk for a replacement, who will be guaranteed is not a used one.

• MacBook Pro and SanDisk Ultra II 960 GB does not

  I bought two SSDs to 960GB SanDisk Ultra II for installation in a Late 2009 27 inch iMac and a MacBook Pro mid-2012. I could absolutely not anything other than a white screen on the 27-inch. I could get the external computer to boot via USB, but when it is plugged in SATA, it wouldn't start. OWC had a few caveats on the NVidia SATA bargaining chips down to a 1.5GBs of speed when you try to bind to a 6 G drive. I replaced it with an Electra OWC 3 G Reader (which worked perfectly). I returned the unopened SSD.

  My next goal is to enter the SSD in the MBP. He chips Intel SATA and is not supposed to have bizarre problems. Once again, I have installed the operating system and started via the USB port, no problems. It does not start when installed internally via SATA. If I drill the old HD, it starts immediately. The SSD makes a folder with one? in the middle.

  I have repartioned the reader for Mac. I also tried to clone with all disk utility, same result. I guess I could try SuperDuper or clone of carbon. I just installed another OWC drive in an other iMac and used disk cloning utility, and it worked perfectly.

  I wish that I had bought the OWC drive now, but I'm stuck with this open disk and I would like to make it work. Has anyone else had problems? I think that the drive is bad, but when in a dock player, it works very well and will start the computer via USB.

  When the SSDS was to the iMac 27 inches, she would not even allow the target disk mode, ot any source of start-up. I really thought that the video card was defective at first, but this player has been creating chaos.

  All the words of wisdom are welcome.

  To make a long story short, it's the SATA cable. The computer would boot from a classic HD so I thouhgt the SATA cable was OK.  Apparently, when these cables fail, they can operate at low speed, but there still may not work at all in trying to negotiate a connection with a 6 G SSD speeds. I also noticed that with the wrong cable, the link negotiated with the convnetional reader speed was 1.5 Gbit/s which was lower than expected. I replaced the cable of a reputable vendor and I got another job of SSD. I think the SanDisk that I ended up returning was really beautiful AND compatible.

  I was clued in after a brand that I know with certainty was compatible would not work either. PowerBookMedic sells relaible cables. "cheap" replacements are not recommended.

  Hope this helps someone else.

• How to quickly get 100 + photos from iPhone in pictures on iMac with the download speed very low broadband?

  Hi all

  I have an iPhone 6 Plus running iOS 9.3.1 and a retina iMac running OSX El Capitan 10.1.4.  I use iCloud photo library and I like the idea of having all the pictures synced across all devices.  This works well for one or two odd photos I take here and there.

  I have just been on vacation and taken 100 + photos with my iPhone and want to create an album of photo printed on my iMac, but the problem I am facing is that it takes so long to get the pictures on pictures on my iMac.

  My download speed high speed is very low - on 0.3Mbit / s, so the photos are always download to iCloud from my iPhone now, and I guess it will be another day or two to complete.

  Is it possible to get the photos from my iPhone to the iMac more quickly without creating duplicates or spoil my library?

  It's so frustrating to have to wait 5 days after her return from vacation before you can start making a photo album.

  Thanks for any help,

  Kind regards

  Ben

  You can connect the phone with USB and import or use iTunes sync or Capture of Image - this can cause a problem with duplicates

  And of course, you can stop by a store StarBucks, Apple (or other WiFi hotspot with good service) and complete quickly

  LN

• SanDisk Ultra II - write errors

  I recently bought 2 240 gb Ultra II.  My intention is to use for the image of my C disk cloning.

  I use one

  Upgrade of the SATA Apricorn EZ Upgrade Kit with USB 3.0 portable hard drive connection and box EZ - UP3

  Link to the device google foregoing and check on Amazon

  I used this camera for about three years now, once a week to make backups of the system.

  After I clone a drive, I start since it to check that it has been cloned successfully.

  I used this camera to try to clone both Ultra II and during the cloning process, I received more 20 000 clerical errors.

  Since I had that much erors he didn't continue the clone so I abandoned the operation.

  When I go in to Win 8.1 disk management, the drive is marked as offline and I can't reformat the hard disk.

  The two drives have the same problem.

  I contacted Sandisk for an RMA for the two days of readers 3 or 4 number and their response so far has been for me

  to run their SSD Sandisk dashboard.  The dashboard shows readers as well without error.  I sent the

  results of Sandisk and have done a few more tests.

  It seems that if the SSD is in an external case connected to the USB 3.0 or USB 2.0 port

  the cloning process gets thousands of clerical errors.  If I put the same SSD in a drive removable bay that

  connects directly to the motherboard I can clone the drive with Acronis True Image Home.

  The SSD should be able tobe used external fences to run a cloning process.

  I use the exact same system and closing to clone of OCZ, Crucial, Kingston, Intel, and Samsung

  SSD with absolutely no write errors.

  Is that what anyone has experienced this type of behavior when cloning the device above.

  I spent several hours working on this issue and I'm about to return the SSD to the seller

  I bought source and buy 2 Samsung SSD

  Thioughts and suggestion please.

  I just finished an operation clone with the new USB 3.0 controller.

  The clone operation completed without error.

  I didn't test with a SanDisk Ultra II SSD since RMA I got them to the seller to purchase.

  I have test it with a SanDisk Ultra flash drive, that would give me a "failed to start' in any USB 3.0 port.

  Now, however, with the new controller, flash drives are recognized and insert correctly.

  I guess that the controller card is outdated since it was 5 years or more and who

  the new controller card will work correctly with the SanDisk Ultra II SSD.

  I will consdier this thread resolved.  If no new problems with the new controller I will present.

• Why 4 GB of ram exhibits very low performance in vista 64-bit?

  IAM using windows vista 64 bit and I have installed 4 GB of ram I noticed very low performance and low score 4.5 I tired to change the positions of the ram and tried to use a different kind of ram, but my score of 4.5 with 2 GB or 4 GB ram sucked into this score with a low yield iam very disappointed of what can one help me?

  2 * 2 GB samsung pc2 6400 4 GB
  and I tried transcend pc2 5300

  HI BUD85

  Contrary to what said 'DaGreenOne' on 'thread lock', I can assure you that we will not do.
  We strive to help you with this problem.  However, I kind of sharing what he or she said several suggestions have been posted but nothing is your problem.  There was some good suggestions posted here.

  It's frustrating, I know.  Question: If you put the 'original' of return RAM in the system and restore the system back to how it was when you bought, 1st you get the experience index you originally?  This is assuming that you are ready to perform a system recovery which erases the hard drive clean and make it the way it was when manufacturing built the machine.

  Please confirm you "not" mix the different types of RAM in the computer, which means that you put in two sticks of 6400 and two sticks of 5300 (these numbers used for example)

  Thank you

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade.

  Original title: clean install Win 7 64 bit

  Like others, I have a problem with a clean install of Win 7 64 bit Proffesional. I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade. A lot of the buiult in functions do work not (Wireless; Hiring of video, USB Ports etc.) and to top it all off I get now blue screen errors...

  If installing from an external DVD drive, crosses, it shows that the HARD drive has already 4 partitions.

  Partition 1 (e :)) Disk0

  Disk0 Partition 2

  Disk0 3 (C :) Partition System

  Disk0 Partition 4 hidden OEM Partition.

  So far I have just selected Heve installation on Partition 3 C: System.

  Y at - it a utility that I can use to retrieve the data from the OEM Partition I want to return to the initial state by default if possible.

  If not what is the best utility to use repartition (how many and what size?) and format the HDD.

  Cordially chrisxsmith

  The best you can do is to contact Samsung and request recovery media to restore your system to its factory default state.

  Call Samsung to get a recovery disc - to find a phone number for your location:

  http://support.Microsoft.com/GP/oemphone/

  Thank you Andre, very appreciated, unfortunately Samsung and their Tech Support here in the UNITED Arab Emirates was not as useful.

  I managed to keep the button restore during the 5 sec boot process that initiated the request 5 restore Samsung which was then able to take the original installation of the hidden Partition image.

  Fortunately the issue is resolved.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Page Firefox blocks, led busy, very low cpu on some sites. I have an example.

  Firefox 41.0, win 10 Pro x 64.
  Recently (possibly before v.41) pages Firefox hang with very low cpu on some sites.
  Firefox itself is not hung, but for this tab, the indicator of the clock continues ticking.
  I open the problem while another tab has the problem.
  Some data on the website are generally displayed (context?).
  There may be a redirect/refresh any (full proposal).
  Note: in this case, the web site is grayed out.
  Example: https://www.code42.com/store/
  Problem is when I navigated to the URL above. Also occurred when I pasted the URL.
  Works in Version Chrome 45.0.2454.101 m.
  Working on board 20.10240.16384.0

  Note: right now, I'm trying to upload an image, the download is not finished. Ticks of the clock.

  I will try to present this anyway.

  I was about to follow the instructions in the above message, but tried the web site to verify that the problem continues. There can be no. I don't know what I've done (maybe I cleared the cache I've been poking).
  Anyway. Please close this incident.
  And thanks for your help.

• After upgrading to iOS 9.3.2,and volume is very low when the reception or appeal of the mine

  After the upgrade to iOS 9.3.2,and I hear very low volume everything without or receive calls. Either side can hear properly

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Slate 7 impossible to insert the sandisk ultra 32 GB micro sd class10

  I bought a sandisk ultra 32 GB micro SD class 10 SKU SDSDQU - 032 G-CFAP-out of amazon. When I insert in my 7 slate and push on to try to get to the spring to engage and the drive to go it is not. I can't get the SD card to stay in and I feel a spring, but it won't click to take the SD
  Is this a compatibility problem because I bought the bad micro SD for the 7 slate or I do something wrong to load? Or my new slate had a defect?
  
  Any help greatly appreciated
  
  Thank you
  GK

  Make sure that you are pressing far enough. It will not be flush with the edge of the device; It is accidental ejection/loss of the microSD card. You may need to use your nail, on a credit card, or small flat-head screwdriver. (I can do that easily with a fingernail and mine are short, but others have reported that it is a little challenging).