Very simple question about Mac and find out which version of the player

Similar Questions

• I'm runing FF 11. When I go to the topic window, you download a patch. How can I find out which version of the patch will take me?

  I am running windows XP - SP2. I don't want FF11 upgrade to FF12 as I already installed it in a different directory. I have to be able to have both installed side by side (but not necessarily at the same time).

  Thanks, I got scared of this. I prefer the way he worked with FF 3. If there is a patch for FF3, it will update to this one first. Then when there was not a patch of FF3, he would say "Do you want to upgrade to FF 11 (now 12)?", and I say "no!"

  However, now, I don't know which version I have will end up.

  Thanks for the reply.

  Best regards.

• How can I uninstall the CD player and reinstall a previous version of the player?

  I tried the Adobe Reader DC and find the appearance of terrible application. The icons are ugly, waste 30% of the visible area of the toolbar on the right border, and I have no plans to use cloud services. I checked the pages of Adobe support for older versions of Reader. All the links that say "older versions" bring back to the DC installation page.  Where are the other versions of the player?

  Thanks for the help.

  Depending on your operating system, you can download the Reader X, XI and http://get.adobe.com/reader/enterprise/ DC

  You must uninstall the drive before attempting to install and the old version.

• 2 very simple questions about 6225 PCI card

  Hello world

  I use for the first time a card PCI of 6225 (80 all entries). This card is linked to two junctions of SCB-68 block and my goal is to use it to acquire 40 Equations signals. Using the wizard DAQ, I came to these conclusions:

  1) the first 8 of my 40 Equations entries go out first to a block?

  (2) the block junction n ° 1 for each differential signal, I need to put a bias resistor 10 kohm between each AIGrnd and the V (-) signal. That's what I did with the other cards X 622. To do this with block n ° 2 too, I have that pin n ° 22, 9 and free to use all of my 32 43 signal. Is this correct?

  I know that these are 2 very basic questions, but if someone could just answer for confirmation, it would be great.

  Thank you very much

  Kind regards

  User

  Hello

  (1) the 8 first entries go to the 1st exit of block as this pdf for Connector 0 shows.  For the last pin of the Connector 1 you will find the information in the screenshot below:

  

  (2) according to your source impedance, you must connect your source as described in figure 4-5:

  

  Or 4 to 6 of the l M-series user manual(page 4-15 to 4-18, so with a coupled polarization resistance also between the positive terminal of the source and AI GND).

  Then if you have a noise problem, you can follow these documents:

  How to eliminate ghosting of my measurements?
  http://digital.NI.com/public.nsf/allkb/73CB0FB296814E2286256FFD00028DDF?OpenDocument

  Reduction of the impedance of the Source of an analog input Signal
  http://digital.NI.com/public.nsf/allkb/CF83426BC3AC514A86256C10005A4771?OpenDocument

  With the help of a Gain (voltage follower) unit with DAQ hardware buffer
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4494

  I hope this helps.

  Kind regards

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Very simple questions about DPS

  I have a few questions about the tools and DPS.

  
  

  1. What is the difference between Folio and DPS Article?

  I think that the two format have a fixed layout. I don't understand difference and the merit of the Article of DPS.

  I want to know why the Folio was disappear and replace by Article of DPS.

  
  

  2. I want to know that all publish root of DPS. (ex.) App Store for iOS, Google android game and..)

  I know that I can make the app, iOS, Android, and windows for each stores with DPS.

  If I want to publish to the Kindle store, iBooks store, store kiosk to newspapers or on the Web site, I don't need using DPS?

  3 if I want to book recomposable (like reactive Web site), I shouldn't use InDesign?

  Is there a process for making recomposable document with InDesign?

  can I use text editor, DW or muse? (such as the manufacture of the normal site)

  I want to know the standard method book recomposable.

  
  

  Sorry for my bad English.

  1. I know you probably talk format but essentially, a DPS classic folio is now a collection, the items in the collections are always content

  2 - iOS, Android and Windows platforms that you can publish on are

  -We do not support the Kindle store

  -For book content type, you want to use the ePub format, please see the following links:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/digitalpublishingsuite/PDFs/DPS_and _ePub_FAQ.pdf

  https://helpx.Adobe.com/InDesign/how-to/eBook-fixed-layout.html

  3 - InDesign has the ability to create recomposable ePub

  See this tutorial: https://helpx.adobe.com/indesign/how-to/ebook-fixed-layout.html (with exercise files)

  Hope that helps!

• my laptop is stolen; I have the serial number of my Photoshop Elements, but do not remember what version; I now have Wondows 8.1. How can I find out which version to download and install?

  Sorry... title says it all. I had a Photoshop Elements 3.0 on the disc and have subsequently downloaded updates and was running an updated version on my laptop stolen with Windows 7.

  My account shows my serial number of Photoshop but not the version number which I forgot. I guess I can now re-download the version I've had - updated to run on Windows 8.1 but do not know which version to download.

  Contact Customer Support by chat or phone and they should be able to look at the history of your purchases.  You might even find it yourself if search you the different links in your account.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

  Support should be able to disable the software for your laptop stolen as well.

• My id works, but when I want to buy something they ask questions of security and electronic security which we forgot the two. Rashida

  I forgot my security questions and answers and the email.when of security I want to buy an App they ask me to answer questions that I forgot. I sent the e-mail on Apple support many times, and today was the third time I rang for the control of Apple support. But my problem is always relative. My version of the iPad is the Version. Ability to No.9.3.1 (13E238) 114 GB. My no no Samsung phone * and my email is the same as Id *. Rashida

  < personal information under the direction of the host >

  Sending of emails are useless alone means, is that you must speak say to Apple Support & proof of your identity

  ***********

  < Published by host > phone number

• How to find out which version of Adobe Reader is installed on the iPhone

  I can understand which version of Adobe Reader is installed on an iPhone?

  Hello

  To check the version of the Adobe Reader software on your iPhone/iPad

  1. Go to your iOS screen.
  2. Press settings.
  3. Scroll down to find Adobe Reader or Adobe Acrobat.
  4. Check the version number.

  I hope this helps.

• Two questions about ASM and GR 11, 2 installation of the grid

  DB version: 11 GR 2
  Operating system: Sun Solaris
  
  1. in GR 11, 2, after the installation of network infrastructure, succesfull ASM instances starts automatically in all the nodes. Right?
  
  2. just after the end of the grid infrastructure installation, I tried to connect to the DSO. But I was invited for ORACLE_HOME rather than GRID_HOME. Why is this? ORACLE_HOME is the location of the client software of RDBMS. I started not to install some RDBMS again.

  $ ORACLE_SID=+ASM1
  $ export ORACLE_SID
  $ sqlplus / as sysasm
  sqlplus: not found
  $ /u03/grid/bin/sqlplus / as sysasm
  Error 6 initializing SQL*Plus
  SP2-0667: Message file sp1<lang>.msb not found
  SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory 
  
  
  
  $ ORACLE_HOME=/u03/grid/
  $ export ORACLE_HOME
  $ /u03/grid/bin/sqlplus / as sysasm
  
  SQL*Plus: Release 11.2.0.2.0 Production on Thu Nov 11 15:20:16 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to an idle instance.

  Hi Garry,

  1. Yes, it should start automatically. You have defined all variables before you start the installation?

  2. the variable ORACLE_HOME must be set to the location of GRID_HOME for the user environment of GRID and the location of ORACLE_HOME for the oracle user.

  Kind regards.

• Try to find out which version of Adobe Premier is compatible with my computer

  Hello everyone, I am in the process of transition in Adobe video editing software. I have used Final Cut Pro for the past (12) years and I'm finally deserting a ship. I was wondering that if I could get some guidance as to what Version of Adobe editing work better with my Machine. I have a Power Mac Pro (mid 2010). Below you will find my profile. By comparing what my machine is composed of and do not bounce these specifications out of my mine are like trying to read the hieroglyphics, at least for me. Thank you all for your help and I'm really excited to start using this software and interact online with what I know is some very technically savvy technicians and artists. Thank you!

  Treatment

  8-core (standard configuration) two-processor 2.4 GHz Quad - Core Intel Xeon E5620 "Westmere".

  12 MB cache L3 entirely shared by processor

  Turbo Boost dynamic performance up to 2.66 GHz Hyper-Threading technology for up to 16 virtual cores

  Quad-core

  (standard configuration) A processor at 2.8 GHz Quad - Core Intel Xeon W3530 "Nehalem".

  8 MB cache L3 entirely shared by processor

  Turbo Boost dynamic performance up to 3.06 GHz

  Hyper-Threading technology for up to 8 Virtual cores

  Advanced Intel microarchitecture

  Integrated memory controller

  SSE4 SIMD 128-bit engine

  64-bit data paths and registers

  Optimized for energy efficiency

  Audio connections

  Four ports FireWire 800 (two on the front, two on back panel)

  Five USB 2.0 ports (two on the front, three on the back panel)

  Two USB 2.0 ports on keyboard included

  Taken minijack headphone of façade and internal speaker

  Audio digital optical and output TOSLINK ports

  Mini-prises of output and analog stereo line level input

  Multichannel audio via Mini DisplayPort

  Graphics and displays

  Double width, 16 channel PCI Express 2.0 graphics slot with one of the following installed graphics cards:

  ATI Radeon HD 5770 with 1 GB memory GDDR5, PCI Express 2.0, two ports Mini DisplayPort and DVI port to double bond

  ATI Radeon HD 5870 with 1 GB memory GDDR5, PCI Express 2.0, two ports Mini DisplayPort and DVI port to double bond

  Possibility of installing two cards ATI Radeon HD 5770

  Support for up to six screens

  Support for digital resolutions up to 2560 x 1600 pixels

  Support of analog resolution up to 2048 x 1536 pixels

  Video cards available for:

  Additional DVI output Mini DisplayPort to DVI (optional)

  Additional dual-link DVI, output Mini DisplayPort to DVI dual link (optional)

  Output VGA Mini DisplayPort to VGA or DVI to VGA Display Adapter (optional)

  Memory

  Dual processor systems

  2.4 GHz system: 1066 MHz DDR3 ECC SDRAM

  2.66 GHz and 2.93 GHz systems: 1333 MHz DDR3 ECC SDRAM

  Eight memory slots (four per processor) supporting up to 64 GB of memory main using 1 GB, 2 GB, 4 GB or 8 GB DIMMs

  Single processor systems

  2.8 GHz and 3.2 GHz systems: 1066 MHz DDR3 ECC SDRAM

  3.33 GHz system: 1333 MHz DDR3 ECC SDRAM

  Four memory slots supporting up to 32 GB of memory main using 1 GB, 2 GB, 4 GB or 8 GB DIMMs

  The system configuration required

  Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

• disk space issues: How can I find out which components of the operating system I use is more to free additional disk space?

  HI: I have problems with disk space; I went to Windows Help and read that if I go into Add/Remove programs who said I could remove programs or components of operating system I no longer use. I remove some programs that I don't use anymore, but I do not know what operating system components I should delete!  Little help would be greatly appreciated! Thank you!

  Before you remove the services I would remove all but the most recent backup and restore point.  Then make a disk for temporary files Cleanup Wizard.  You can make you smaller file page, if you do not use put into hibernation, you can save 4-8 space gigis.

• Test to run to find out which version of DirectX, I'm running

  DirectX test

  Click Start and type "dxdiag" in the search box, and then press ENTER. The window that displays a list of system information, in the lower will be your version of DirectX.
  Note:
  If you have XP you have DX9 at least, but probably DX10/11
  If you have Vista you have DX10 probably DX11
  If you have windows 7 you have DX11

  I hope this helps.

• How do I find out what version of the APP is supported by WebLogic

  The version of WebLogic, I used is 10.3.6.0. In order to use JPA2 instead of JPA1, I followed the guide says to set it manually by adding these lines in commEnv.cmd (programming Enterprise JavaBeans, 3.0 for Oracle WebLogic Server 11 g Release 1 10.3.6 Version):
  
  Set wls_modules = C:\Oracle\Middleware\modules
  Set PRE_CLASSPATH=%wls_modules%\javax.persistence_1.0.0.0_1-0-2.jar;%wls_modules%\com.oracle.jpa2support_1.0.0.0_2-1.jar
  
  Then I changed to TopLink Kodo on WebLogic console.
  
  Suddenly, I read "Java EE 6 support comes at WebLogic 10.3.4.0 on January 15, 2011" (http://dev.eclipse.org/mhonarc/lists/eclipselink-users/msg06874.html).
  
  I wonder if WebLogic 10.3.6 is already set to use default JPA2. We could easily answer if I knew how to see what JPA, JTA, EJB, or wherever the version of configuration are defined when the server is started. Where can I get this information?

  My understanding is that the situation in WebLogic 10.3.6 is quite the same as in earlier versions - it comes with the jars of JPA 2.0, but they are not enabled by default so that it can respond to the Java EE 5 compatibility requirements. This is mentioned in the documentation that you could see here: http://docs.oracle.com/cd/E23943_01/web.1111/e13852/toc.htm#BGGBIJBI
  and the docs to 10.3.5 here:
  http://docs.Oracle.com/CD/E21764_01/Web.1111/e13852/TOC.htm#NOTES149

  The link that you referenced says not 10.3.4 WebLogic's Java EE 6 compatible. The reference I think you got this from says that the com.oracle.jpa2support_1.0.0.0_2 - 0.jar is included for future compatibility of Java EE 6, but it is not enabled in 11.3.x so that there is Java EE 5 compatible. It is essentially delivered an overview of Java EE 6 components that are not enabled - only WebLogic 12 c is fully Java EE 6 compatible by default, which includes the JPA 2.0.

  Best regards
  Chris

• How can I add two very simple Questions to a slide?

  Hello

  I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:

  ====================================================================================

  Scenario of

  The slide must contain two questions:

  Question 1: with two check boxes for the options Yes and No

  Question 2: with five check boxes for options 1 2 3 4 and 5

  A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.

  ====================================================================================

  The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.

  
  

  If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.

  
  

  For reference, I use 8 Captivate.
  

  
  

  Thank you

  
  

  Ross
  

  I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.

  Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training

  Advice - Training interaction - Captivate blog

  BTW, I moved this thread to the Quizzing subspace.