Very slow access to network between Windows 7 64 and XP 32 readers

Similar Questions

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• I need help setting up a network between Windows Vista and Windows 7.

  original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER

  HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER

  Hello

  You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows

• What is the difference between windows 2000, XP and Windows 7

  Hi please God let me know the difference between windows 2000, xp and win 7. I want t o knopw technical specification.

  Thank you

  JAI

  You can find many differences between older and newer Windows versions. Windows is always improving with better technology. Visit this link for the versions to compare Microsoft Windows:

  http://en.Wikipedia.org/wiki/Comparison_of_Microsoft_Windows_versions
  You can also see this article on the Microsoft Windows Web site:
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• Are there differences between Windows 7 OEM and the commercial full version?

  Are there differences between Windows 7 OEM and the commercial full version?

  Commercial versions include two disks installing 32 and 64 bits and can be moved to new systems.

  OEM versions are either 32 or 64-bit - only installation disc is included - and cannot be moved to a new system.

• What is the difference between Windows 7 OEM and the retail version of Windows 7?

  Can someone tell me, what is the difference between windows 7 OEM and sales vs retail?

  On Thu, 20 Sep 2012 19:56:47 + 0000, STEVE-5 says:

  Can someone tell me, what is the difference between windows 7 OEM and sales vs retail?

  There is no difference in the product itself.

  Although if you get a generic OEM full version, it contains the
  even software, it has the following disadvantages compared to the
  commercial version:

  1. the biggest drawback of an OEM version (at least in the USA) is
  that its license it permanently binds to the first computer, it is
  installed on. He can never legally be moved to another computer, sold,
  or given (except with the original computer). If the computer
  dies or is stolen, your license dies with him.

  2. he can't do a clean install, not an upgrade.

  3 Microsoft offers no support for OEM versions. You cannot call their
  with a problem, but rather to secure the necessary support of your
  OEM; who take in charge may go anywhere between property and non-existent. Or
  You can get support elsewhere, like in these forums.
  Ken Blake, Microsoft MVP

• Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

  I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
  Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
  I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
  I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

  Hey ArnisR,

  I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

  The problem is caused by the last (HP) ISO (from March);

  -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

  -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

  I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

  The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

  Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

  I hope this helps!

• Network connection between Windows 7 Pro and Windows XP Pro wireless

  Nice day.

  I am trying to connect to a Windows XP pro to a home wireless network, hosted by a pc Windows 7 Pro. I can see all the other PCs on the XP pc but cannot get them to connect. When I click the icon for the Windows 7 pc and try to log in (open) he asks a user name and password but I don't know what is the user name. I guess the password is generated by the computer windows 7, when I set up the homegroup. Would you please advise me on what to do to make this work. Thank you.

  Hi ArnBas,

  Looks like you are facing a problem with network computers. I came to find this documentation for you who speaks the networking of the various versions of the computers.

  Just through the same thing and check if everything is fine with the settings. Also, take a look at this very useful information.

  I hope this helps!

• Printing problems home network between Windows XP and Windows 7 PC base

  I've seen a number of comments about problems between Windows 7 and Windows XP computers print domestic network.  In my case, I have a new Windows 7 Desktop connected to my printers and wireless modem and I use several portable Windows XP in the House that I am trying to reconfigure to wireless network printing.  My old desktop running Windows XP and I had this printer sharing wireless works fine.  I can't get the right of sharing the printer with Windows 7.

  Can anyone help?

  Roger Phillips

  This sounds like the correct driver and is supposed to be OK for the network or directly connect according to the HP website.  There could be something in the fine print of the following HP support document that will help you: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskId=101&contentType=SupportFAQ&prodSeriesId=1845551&prodTypeId=18972 otherwise, the guided "Troubleshooting," "automatic Driver Verifier", or links to "Resources for collaboration" in what follows may help: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportResources.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551

• Satellite Pro 6100 very slow during the installation of Windows XP Home edition

  Hello

  We have installede Windows XP from our CD orig., XP is running very slowly and the mouse freezing of minute-to-minute. We can install Windows 2000 and it works perfectly. Try a new HD with the same problem, it has 512 MB of ram.

  Hello

  As far as I know this device is supported for Windows 2000 Professional and Windows XP Professional. Is there a similar situation when you use the original recovery Toshiba WXP Pro media?

  In fact, do you have a?

  By the way: I hope you're talking about the new installation without specific or additional preinstalled software you need!

• Computer is very slow to download programs, especially at the start and when I try to watch a video clip, it takes forever to load.

  Original title: slow and jerky

  My computer is very slow to download programs, especially at the start.  I tried to reduce the programs start, but in vain.  Also when I try to watch a video clip, it takes forever to load, and then when he does, she plays in 2-3 seconds intervals.  Help

  Hi LouisBode,

  1 Windows operating system you are using?

  2 did you a recent software or hardware changes to the system?

  3. What is the brand and model of the computer?

  4. what program you use to play the videos?

  5. this happens with all the videos that you try to play?

  Method 1:

  If you are using Windows 7, you can run the troubleshooter of performance and check if it helps.

  Open the troubleshooter of Performance

  If you use Windows Vista, then try to run the Fixit from the link:

  Difficulty of Windows system performance slow computer problems

  Method 2:

  You can read the article and try the steps to solve the problem:

  How to resolve performance issues during startup in Windows Vista

  Note: This article also applies to Windows 7.

  Method 3:

  You can also refer to the computer or the device manufacturer's Web site and install the latest version of the drivers for graphics cards.

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

• How can I share files between Windows 7 Pro and a Mac with os x?

  I have Windows 7 Professional and my colleague had a Mac with os x installed. We are physically in the same room, sharing a wifi connection. How to share files between two computers? That each of them should do on his computer?

  If you display links, please check beforehand that the procedure for the mac is here. I found in the internet or other of the procedures for older systems Win or network only between Win 7 PCs.
  

  MOSH

  Of course, you can do it easily. In fact, the implementation of sharing on Win7 last month was almost as easy as it is on OS X.  ;-) I find that the snow leopard has the same bugginess of show Windows machines only randomly in the sharing of the Finder section, as it did in Leopard, however. I usually connect to Windows machines by opening a window of Finder and using go > connect to server > smb://Windows-computer-name instead. In the Win7 box, I have the network to the desktop icon (you can get this to customize > change icon).

  On OS X, make sure you have checked in the file sharing system preferences > sharing. Click the Options button, and then select "share files and folders using SMB." Add the shared directories as you wish.

  You must create accounts/passwords user on the Mac and Windows 7. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop in Win7 (a particular user account) for convenience, you can do this.

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  You can find options to logon automatically for OS X in system preferences > accounts.

  On Win7, go to control panel > all items in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You do not want to use Homegroup.

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  Configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, Configuration File and Printer Sharing ON will take care of that for these machines, and if you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  OS X Firewall is done in System Preferences > Security. Click the lock to make changes, and then click the Advanced button to ensure that SMB sharing is allowed. If you set up in the share pod, it will be.

  On Win7, create shares as desired. I usually just share the Public, users desktop folder and all hard drives of additional data in the system. MS - MVP - Elephant Boy computers - don't panic!

• What is the difference between Windows Live Mail and Windows Live Hotmail

  I have a laptop with Windows 7 and 'Windows Live Mail account'.   It seems to work very well! About 11 months later, I bought a desktop computer with Windows 7 and I tried and tried to get this computer to the top in the same way, but with a different e-mail account.  Whenever I try to set up mail, it always comes back with Windows Live HotMail.  My question is: is there a difference between accounts "Windows Live Mail" and "Windows Live Hotmail?"  If there is a difference, why can't I created a NEW Windows LIve Mail account on my new desktop computer if I use an email 'different '?

  Internet service provider (ISP) - those that you get your Internet from.

  Email Service Provider - the people who provide you your e-mail services (usually can be understood by your email address - as @hotmail.com, Hotmail/Windows Live Mail or @gmail.com average Google mail...) Etc.

  Email Client - the application on your computer that you use to send and receive email from your provider.  Could be Microsoft Outlook (all versions), Windows Live Mail, Thunderbird, or you can simply use Internet Explorer/Firefox/Safari/opera and so on to connect to the web interface of your e-mail Service provider and consult your emails in this way.

  Sign here is just one thing.  Your real account.  You may have several.

• Connection between Windows media center and Xbox is lost when you try to watch movies

  I start watching movies via the windows media center and after a few minutes it turns off and it says that the connection between my pc and the xbox has been lost, I have previously watched movies like this with no problems and have not changed the settings of any sort help it would be appreciated

  Hi samperry,

  What is you receive the exact error message?

  Method 1: You can follow the steps mentioned in the article below
  What happens if the connection to the Windows Media Center computer is lost?

  Method 2:  You can see the steps outlined in the article below, which deals with a similar question

  Error: Session Terminated (when connecting a console Xbox 360 to a computer running Windows Media Center)
  http://support.Microsoft.com/kb/911123