Very slow DVD recording on my Satellite M30

Hello

I have a satellite M30 with a burner DVD Teac dv-w28e. Engraving on takes (8 x) DVD 1 hour and a half to 4 GB, even if the burning program indicates the speed is 8 x and the estimated time is 10 minutes.
So, what's the problem?

Hello

What burning program did you use?
I prefer to use Nero burning utility. In my opinion, he is one of the best burning tools. You should check if you have this problem with other burning software.
You simulate the burning process or did you burn the DVD without simulate?
As far as I know that some programs simulate firstly the procedure of burning and having well simulate files will be burn on DVD. In this case, the burning process takes much more time.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite 1800 plays very slow DVD

    My Satellite S1800 is very slow, trying to watch movies dvd, image and voice stucks and when you watch videos from youtube, the same thing.
    I just formatted my hard drive and reinstalled Windows XP and thinking that would help, but no, its always the same thing.

    What is the problem? My toshibas characteristics: 1 GHz, 256 RAM, 8 MB trident cyberblade ai1, 20 GB, I think that those who must roll a few dvd movies?

    Hello

    that you have correctly installed all the drivers for this machine? It's really important, because without the correct drivers you won´t be able to get the full potential of your material.

    The other thing is, it s always better (especially at these present times) to have a codecpack on the computer installed.

    Try this link and install a codecpack for having the latest codecs for video/audio files.

    www.free-codecs.com/download/K_Lite_Codec_Pack.htm

    Welcome them

  • My dell 1520 very slow dvd burning

    Hello!
    I don't know what happened,
    my dvd burner was ok...
    but now I can't burn even 1 dvd
    It is verrrrrry slow. more than an hour.
    & It still fails in the verification of the data.
    I tried nero, roxio... I uninstalled & reinstalled.
    but the same problem.
    I tried different media...
    same thing.
    I don't know what happened. perhaps I installed something that has changed something in my settings in vista?
    I uninstalled my "daemon tools". but the same problem.
    I remember that I installed "macdrive" on my vista (a program). but I uninstalled it for weeks.
    why it is burning so slow? (& why it failed in the verification of the data)?
    Help

    BTW, I searched on the net already & found this DMA issue.
    I went to my device manager & under IDE channel I have active dma. If this is not the case:


  • Very slow, first install win7 on Satellite L875-126

    installing windows 7 start for at least 2 hours and is now just the instalation network (for 30 minutes and not finished). I guess that this laptop has a problem.

    Can someone tell me if the same problem has happened to him?

    When you start the laptop for the first time recovery image must be installed. This can take up to 2.5 hours, so in my opinion there is no problem at all.
    Just be patient and wait for the installation of the OS to complete properly. Do not interrupt.

    If please, create the recovery disk as soon as possible and do not have certain experiences before that you created this record.

  • Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

    Hello.

    The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
    I use good philips and kodak media (both rated 16 X).

    now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

    A firmware update would solve this?

    Thank you very much.

    Hello

    To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
    As you probably n t know the speed of combustion higher risk of burn errors
    I burn my DVD only using a single 1 x speed.

    Then I can be sure that all DVD players would be able to play the burned DVD.

    Greetings

  • Satellite M30 - after replacing drive DVD 0203: failure IDE #2 appears

    Hello

    I replaced the DVD unit on my Satellite M30 as it was broken. I installed the same unit (UJ - 820B), but now at startup, I get the error message 0203:Failure IDE #2 with options to continue starting in the operating system or run the Setup program (which does not offer something to solve this problem). The operating system (Windows XP sp2) loads fine, but the DVD unit is not recognized.

    Help!

    Thank you.

    Hi Paul,.

    All optical discs are delivered with a parameter of the base (master, slave, or C/salt) interface configured in the firmware. on PC, readers there are usually small switches to activate this setting to change, but unfortunately on readers portable there is not, so it is very important to make sure the new drive is correctly implemented by the manufacturer of the correct specification for your laptop.

    If you got the new drive to an ASP then you will need to confirm with them that the new drive is set correctly.

    From my experience, most third-party resellers don't advertise what settings their readers that makes get a suitable replacement that is very difficult.

    Kind regards

  • Satellite M30: Replace DVD with additional HARD disk?

    Hello!

    As my Satellite M30-642 does not offer a modular Bay for the installed switches and I have a DVD burner for USB that I can use I think try an experiment: withdrawal of the DVD drive and replace it with an extra HDD/SSD.

    As SSDS are very light, have no moving parts and does not necessarily need screws to be installed and the slot DVD brings the IDE and this could work to power connector. The DSS must be placed inside an old and updated the slimline cd-rom so that the change is not visible and the laptop is safe from dust etc.

    Has anyone tried something like this before? Are there solutions to buy for Sat M30 (2004 vintage)?

    Cheers, obreitfelder

    Hello

    As far as I know the Sat M30 doesn t support the slim select Bay and, therefore you cannot use this adapter instead of the CD/DVD drive.

    Sorry, it is not possible

    Good bye

  • Satellite M30-107: the DVD Supermulti drive burn DVDs?

    I have a Satellite M30-107 P - M 745 / XP HE / 512 MB / 80 GB / 15.4WTFT / DVD SuperMulti / WiFi.

    His CD/DVD player is described as: DVD Supermulti drive compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM
    Maximum speed: reading: CD-ROM 24 x, 24 x CD - R, 12 x CD - RW, 8 x DVD-ROM, 4 x DVD-R, 4 x DVD - RW, 4 x DVD + R, 4 x DVD + RW, 2 x DVD-RAM / writing: 16 x CD - R, 4 x CD - RW, 8 x HS CD - RW, 4 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM

    Can I use this disc in WRITING ("burn") the DVD and if I can, I need any special software and what type of disc can I use.

    I would use it to back up the laptop.

    Thank you.

    Hello

    Why you ask? You have published the specifications of player and according to these specifications of hardware of the player are able to write on 16 x CD - R, 4 x CD - RW, 8 x CD - RW HS 4 x DVD-R, 2 x DVD-RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM.

    For me it s case. You can write data and files on the DVD s
    I use "Nero burning ROM" software to burn it to CD or DVD. In my opinion it's the best program and very easy to use.

  • M40-277: the laptop is very slow, during the writing of CD/DVD

    Hello

    I have a problem with my DVD writer. When I try to write a CD or DVD with my laptop, my laptop is very slow, I can barely move my mousepointer and my buffer State maintains have failed (see screenshots). Even when I try to play a CD or DVD it slows down my laptop. I don't know what the problem is. Can someone help me?

    I have this laptop: "Satellite M40-277" with the DVD-RAM UJ - 841S.
    Screenshots:
    http://users.skynet.be/fa027951/s1.jpg
    http://users.skynet.be/fa027951/s2.jpg
    http://users.skynet.be/fa027951/S3.jpg

    Thank you.

    Hi Gianni,

    I use Nero to burn DVDs, and one of the configurable options is the task of "priority". If I set it to 'high' then my phone behaves as you described, that is very slowly. Check if you have you encode/burn too high task priority.

    Kind regards

  • satellite 2520cdt is very slow after replacing HARD drive

    My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
    I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.

    I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.

    Is there a solution?

    Hello

    I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
    However, try to defragment the HARD drive.

  • Satellite P300D - 15 c is very slow to start WMI

    Hello

    My pc (Satellite P300D - 15 c) is very slow at startup.
    When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

    After that, my pc on the screen fr jumps 'welcom' starts normally.

    So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

    Is there another type of solution, except turn the WMI service?

    Sorry for my bad English,
    If you can answer me in Dutch or English basic ;-)
    With sincere friendships.

    Johan Nijsse

    Here's the (Dutch) log of the WMI problem:

    Logboeknaam: Application
    Bron: Microsoft-Windows-WMI
    Reference: 2009-04-06 22:52:53
    Gebeurtenis-id: 10
    Taakcategorie: Geen
    Level: who cares
    Trefwoorden: Klassiek
    Gebruiker: Derby
    Computer: PC_Fam_Nijsse
    Description:
    Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
    Gebeurtenis-XML:



    10
    0
    2
    0
    0
    0 x 80000000000000

    1961


    Application
    PC_Fam_Nijsse



    ./root/CIMV2
    SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
    0 x 80041003

    Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

    It will be interesting for you.

  • Satellite L855-14R: games running very slow after installing Win 7

    Hi guys,.

    I have the L855-14R satellite, which came with windows pre-installed 8.

    I used win 8 during a time and games have been works ok.
    So I decided to install a copy of windows 7 ultimate 64-bit.

    I downloaded all the drivers from toshiba support and it seems to work fine until I started the same game I played before.

    He was running very very slow even on low graphics settings.

    No idea of what went wrong after the win 7 installation?

    Have Hmm you installed the driver of ATI graphics card?
    Maybe the game uses the Intel HD internal graphic that is part of the Intel Core i7-3630QM processor?

  • FIFA 13 game very slow on my Satellite L750D

    Hello

    I use * toshiba satellite L750D * (8-32 bit windows).
    His works well. But yesterday, I install fifa 13 but its very slow.

    My game graphics ratting is 5.8.
    Graphic desktop is 4.3 ratting.
    Calculation of ratting processor by 3.7 second and I play fifa 13 in my laptop.
    RAM: 6 GB
    Processor: amd - one 450 APU 1.65 GHz dual core

    hepl me like...

    Post edited by: tamim_1

    Post edited by: tamim_1

    Don t know how to help you maybe material s notebook isn t good enough for Fifa 13.
    It s the new game so perhaps should be better material.

  • Satellite P300 - very slow

    I recently put a Satellite P300 from a guy on ebay, it seems to be very slow. Can anyone suggest what I can do?

    Thanks for your time and your help. (apart from him giving back lol)

    Hello

    What to say? I think that it of not possible to say something because nobody knows what operating system you are using and what things software you already have installed maybe you can add this information

    Usually these problems are related to the OS if a lot of software is installed. Therefore, it would be useful to reinstall Windows

  • Satellite M30-704 slow start and IDE #2 0203 failure message after replace it

    Hello

    two problems:
    first after replacing the cd/dvd drive, my computer does not start now automatically and displays a "IDE #2 0203 failure" message. I can start then it but all of that takes time?

    second problem: until I can access any program, a message will appear: "apdproxy.exe - Application error - the application failed to initialize properly (0xc0000006)" appears twice before so I can continue and then the computer is very slow.

    Can anyone offer solutions? (ps - these two problems are not related that they occurred the month apart).

    Thank you, Gardiner

    (1.) I would say that the BIOS can't handle the new drive correctly because wrong settings master/slave/c-salt but he s strange the player is running.
    I think you should check in the Device Manager, the primary and secondary IDE channels.
    The transfer mode must be on DMA if available and the type of automatic detection device

    2.), it seems the ' apdproxy.exe is a part of the Adobe Photoshop or a similar application.
    This software may cause an error. So just try reinstalling this program

Maybe you are looking for