Very slow E3200 with Comcast:

Similar Questions

• Very slow even with instances.

  Hi all, I am trying to compress a bunch of my own videos to save space. I have the compressor 4.2.2 on El Capitan 10.11.5, latest version of the software. My specs are:

  iMac 5K end 2015

  4 GHz Quad Core i7, hyper threaded to 8 logical cores

  32 GB of RAM

  AMD Radeon R9 M395X 4096 MB

  I export source H.264 in MPEG-4 h.264. I'm very slow sometimes, and this becomes even slower when I add an instance. Also, I edited the .plist preference file for the compressor and added more cases that I have been authorized by default because it was not maxing out my CPU. If I have 1 instance (as the compressor allows me) or 4 instances (which uses 90% of my CPU in the activity monitor), it seems much slower than the single instance. Why? My iMac is the most high-end model and a 8 logical cores, how is it unless its slow export when I use more instances? Its already very slow with just a single instance. How to speed this up?

  The Mac Pro is the most high-end model.  When transcoding to H.264 format, use not all instances.  The CPU has a built-in H.264 encoder that uses the compressor.  So bodies indicates compressor to ignore that and just do it via the encoding only software.  The speed you get is the speed you get.  Without knowing the length of your videos, what are their original format and the codex, or how long they take, I have no way of knowing if your Mac is slow or if you expect too much of him.  This information would be useful.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Very slow MacBook with el capitan

  given that I've upgraded to el capitan my macbook is very slow.

  For example, in the calendar: passage from one day to the other takes about 4 seconds and the spinning wheel is displayed before jumping on the selected date

  etrecheck seems OK to me

  I planned to return to the Mavericks already

  I don't have any idea more

  PS my Macbook is mid-2010, 8 GB of RAM and I often work with virtualbox using about 3 GB of 8 GB of RAM

  Rudolf

  You say EtreCheck looks right to you, but maybe someone else can see something you overlooked.  Could you copy the status report and paste it here please?

• Very slow performance with Windows 7 on i7 Quad

  I bought my wife a Lenovo E530 i7 quad with screen 1600 x 900 and running Win 7 in September 2012. Previously, she had an Asus Core 2 Duo also with Win 7. The laptop is used to picture (scanning, editing, cataloging) work, family, the navigation and email history.

  The E530 was desperately slow at the beginning. Not better, not faster than the Asus. Performance seems to vary from slow to excruciatingly slow.

  Features include:

  -very slow to open programs

  -slow to react to the choice of menus and clicks

  -slow to react to the touchpad

  -scrolling is not smooth, vibrates, much worse than Asus

  -often distorts the sound and video, audio stutters

  -IE9 make often video has properly - green band across the bottom with the rest of the colors shifted upward - change the video quality will fix it sometimes

  -very slow internet response compared to the other machines on the same network of navigation.

  However, startup speed seems to be OK.

  I spent weeks (months?) through the forums, verification of updates, deletion and restoration of various programs and drivers looking for driver clashes. I tried the clean boot with only Windows drivers and various other combinations, and it made no difference.

  For a long time wifi would be max 54 Mbps but somewhere through the process he begins to operate at up to 300Mbps.

  Nothing seems to stand out in reports on health of the system and the event viewer. Windows experience scores seem to be everything I expected from my older i7.

  Resources and performance monitor reports a problem with the hard drive:

  The average disk queue length = Max 16 = 106

  %Idle = 0

  Disk read/s Ave = 0.093 Max = 3

  Disk sec/Transfer Ave = 0,067 Max = 1

  Disk s/write = 0.022 Ave

  Even when the computer runs slower the CPU usage, and memory usage is not mounted and ceiling ever.

  SFC report any breach of integrity.

  FixIt MS - slow performance does not detect any problems.

  The disk check is not a problem any.

  It's so frustrating that my wife threatens to throw it in the trash and buy a Mac (the horrors :-)).

  Any ideas on what I might have missed or what I should look at?

  Thank you

  Ken

  Ken

  Wish I had a 128 GB SSD. I suppose you see a serious helping hand to the performance of the system.

  Please do not forget to mark the answer.

• Time of very slow start with SSD

  Hello

  I spent the last few days the net trying to find a solution to the boot of win7 very slow but have led to nothing so far trawling.
  Im running Win7 Pro in bootcamp on a Macbook Pro with an SSD and 16 GB of RAM, but don't get a time horribly slow start, including a screen black (with usable mouse) for a long time before the watch office. I am not able to do a reinstall but would like to get the issue resolved if possible.

  So far, I checked the event viewer to see there are problems and I don't see anything significant that the mere fact that each entry includes an 'Error' level, but I don't see what this error. I also used the process monitor to see what takes so long and there are a couple of processes which are time consuming and show a result 'Cancelled', one being svchost.exe 110secs (path: ...system32\drivers\etc) and the other 23secs Explorer.exe (path: ...appdata\roaming\microsoft\systemcertificates\my)

  I should mention that I'm very new to this kind of troubleshooting but would appreciate any help I can get!

  Thank you!

  The problem is that windows has been hanged in trying to restore network connections. Problem solved!

• Very slow network with 10 Workstation and Windows 8 / 8.1 Windows

  Hello

  I come to you because I have a problem with the network with 10 Workstation and Windows 8 / 8.1

  In fact, if I copy files from or to a virtual machine with my host of Windows 8 by sharing Windows (SMB / CIFS), it is very very slow and unusable.

  Example: My host is a Windows 8 x 64 and Windows 8 x 64 host: transfer speed is about 100 or 200 KB/s and often 0 KB/s (transfer seems to be paused).

  With a guest Windows 8.1, same problem.

  After many tests, I also tried with Windows PE 5 (same kernel as Windows 8.1): same problem, unusable.

  But, miracle, if I use "Utility MSI - X OFF" Intel, I reboot and the problem disappears.

  There:https://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng & DwnldID = 18946

  Someone in this community, said that it have the same problem and a workaround solution was not to use Intel e1000e but e1000 then: I must admit, it works.

  With e1000, speed is around 30 to 60 MB/s and stable.

  But, by default, 10 Workstation e1000e value when I create a new VM Windows 8.1, so it's a problem... Do not manually change for each new virtual machine and explain this to my students.

  Please, you can reproduce this bug and fix it?

  Thank you very much.

  New workstation 10.0.2 fixed this bug. Perfect.

• very slow vCO with certain AD user accounts

  Hello

  Some of my Active Directory user accounts are very slow when I use to connect to Orchestrator. The problem is not all user accounts and I see no difference between the slow and fast account. The problem appears when I connect to a display of Web pages as well as when I connect to the Orchestrator client. Frankly it is even worse with the customer. The last time I checked that I had to wait about 15 minutes until the API upload script finished. I looked for a log file of the additional information, but the Orchestrator server does not connect anything during a user login.

  Everyone knows the same problem?

  Thank you very much.

  Hi again,

  The patch and the KB article for this issue has been published today:

  http://KB.VMware.com/kb/2031391

  If please, give it a try when you have a chance and we're going to know your comments.

  Thanks for the patience,

  Igor.

• First Pro CC very slow 2015 with C300 II 4 K files

  Hello

  I tested Premiere Pro on a 24 12-2010 GB MacPro with a GTX 6 GB 980ti Core and fast Samsung SSD C300 II K 4 files in 10 Windows and OSX. First Pro 2015 9.1 can barely play these 4K real-time files at a resolution of reading 1/2 (4K sequence) or full resolution of a sequence of 1080 (resized to the size of the image) in Windows 10. Under OSX, organization can play 1 4K video at full resolution in real time (barely). FCPX may 5 K 4 clips at full resolution before slowing down (6 Staples still play, but rough).

  On a MBP 2014 2.6 Ghz i7 16 GB GTX 750 M, SSD: body barely plays real time at a resolution of 1/2. FCPX plays at full speed, with a very catchy wash.

  I thought that maybe there could be a problem of driver or configuration on Windows 10, but after these tests, it seems that Premiere Pro needs an entirely material update support 4K?

  In OSX El Capitan, I changed the rendering engine of CUDA for OpenCL. Now everything works real time, including two additional monitors: a 4K display and a 1080 p, resolution reading Full HDTV. This is clearly a bug/design-problem somewhere.

• Very slow scrolling with Images

  I'm under Framemaker 11 on a Windows 7, 64-bit machine with an i7 processor with 2 + ghz 8.0 MB of RAM.

  My frame files, with images referenced/imported, are scrolling very slowly. When I say slow, I mean that the page scrolls in see it freezes for 10 to 20 seconds ahead of "catch-up" and the display of the page.

  I have an image of 'background' on my master pages that contains simple graphics for some curbs to delineate areas of the page and the header at the top. These environments is imported. Any Thjese files are approximately 1.1 MB.

  My remaining images are imported by the various pages of reference body. They are files .ai and 2.5 to 5 (ish) MB in size.

  I was searching for an answer. My deadline will pass my by while I wait for pages to load. Help, please!

  The. EPS and. Files HAVE of that time were near the same format as the EPS and used the preview images of low resolution (for precisely this purpose of not having to make the full graph for the work on screen).

  The current. Files I use a PDF format who think FM is a true PDF and try to make (she does an internal conversion in EPS and creates a preview frame high resolution all on the fly, he's doing extra work). Directly import current. HAVE the files is not recommended because you can lose features and content because it is not a true PDF format. Create EPS files from the. The files and try to use those instead.

• Portege R400: Very slow Performance with Vista Ultimate

  Hi all

  Portege R400 is delivered with Windows Vista Ultimate 32-bit Edition and Vista is really - honestly - incredibly slow! (especially with R400, due to the configuration of the laptop)
  So I decided to install Windows XP Tablet PC... But I discovered that there is no driver available for R400 XP.

  I'm not directly complaining on the Portege models/series...
  It's a great design and I bought it, knowing the configuration. But I didn't know how Vista was eager for system resources...

  I complain on Toshiba policy or what-so-ever ONLY to the Vista and not XP drivers.
  Microsoft is desperately trying to sell Vista because they know, they really don't have this time and I heard stories about how they block their own market XP.

  .. .and I think that Microsoft and Toshiba can have an agreement on "selling only computers laptop Vista..." (just a guess but it seems so... correct me if I'm wrong)

  It is a torture to use Vista on Portege R400 and other equivalent configurations. (even when all the Visual effects system, disabled etc.)
  On the other hand, I can't use my XP on R400 tablet... so...

  So, trust me when I say I'm going to throw it away!
  But before doing this, if anyone of you knows a solution to my problem. Please let me know,
  because I paid a lot of money for this turtle.

  concerning

  PS: I hope that this is a democratic platform and my post not be erased or changed.

  Hello

  First of all, you don't have to suspect Microsoft or Toshiba has an agreement with Vista. Toshiba isn't the only primary selling units with just a VIsta operating system, almost every laptop to the manufacturer it.
  And you're right, Vista is a slow operating system, because it has a new UI with lots of graphic effects here and there and many features like the sidebar, you have really not at all.

  Since I bought my first one Vista laptop at the beginning of the year, I thought, as I don't want to not be installed and want my XP back and so on and there was no available to manufacturers of XP drivers download page either. I have a Toshiba laptop no and had the same frustration as you.

  Now, I had two options, check every important feature on my own via google or using tools such as engineering pilot or pimp my Vista driver installation.
  Firstly I did an installation of XP, all drivers to research, I need, who did not take my as much as I thought it would be. But after a while, I wanted to give the new Microsoft OS a chance.

  Used disk recovery and first wiped all the software I didn't need, so goodbye almost every tool installed on my machine, which was not unique to microsoft.
  Disabled many features, that I didn't want and I can say, speed increased a lot! This brought my buy an original version of Vista, made a new installation, installed all the drivers necessary, and hey, I'm happy with it.

  Thus, ended with my story, you have two options now. Search XP drivers on your own, using the tools and google or tweak your Vista. There are many guides on the internet that can help you.

  And do not be angry with Toshiba, as it's the same problem with other manufacturers too, as you can see in my case.

  HomerJ

• Very slow journal with Windows 7 Home Premium on HP laptop

  I have Windows 7 Home Premium.  Recently (last week or almost) the connection seems to be ultra slow, about 5 minutes to get the login and about 30 minutes before the laptop is usable.

  HARD drive runs flat all the time.  Laptop HP, i7, 8 G RAM, 1 G vid.

  Reviewed recent events in this moment:

  Update Norton 360

  IE 9 support

  Windows 7 service pack

  Last night I deloaded and reloaded Norton without effect.  A MS updated with another patch is new support for Windows 7, with no improvement.  If anyone else has had this problem and possible solutions don't know?  I noticed an error with USB drivers participated during the Win 7 patch load.  Maybe I need to try to unplug my USB keyboard and USB mouse to see if it has an impact.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• Video playback very slow failure with iGPU and dGPU activated simultaneously

  Until a few months ago, my PC has been run with an i5 760 and my current Radeon HD 7850 on items 11-first reading was smooth and I could edit my videos fine.

  However, recently I installed a new processor and motherboard - a 4770K i7. The key thing here is that it has integrated GPU (so called "iGPU") that can operate in tandem with my current dGPU (discrete GPU, the HD 7850) by the presence of jobs such as the rendering of encoding videos and sent to the iGPU in a function called Quick Sync transcode. In order to use this, I had to link a virtual/VGA monitor to my motherboard port (because according to this post by vaesauce on the forums of the OBS), and for all applications that worked perfectly (Handbrake transcode very quickly, and I can listen to with OBS with negligible performance). Except one - first elements 11.

  When I started first elements 11 to edit a short clip yesterday, I was greeted with a screen that informed me that I had incompatible drivers. I went and checked my video drivers for both of my GPU - to both day - the reinstalled and restarted. Tried once more, the same question. Past to try and change just resulted in a complete failure of video playback and audio playback. I found the solution was to disable my iGPU in Device Manager, then it works fine.

  Now, here's my question - how can I have the dGPU and the iGPU active and able to edit videos with Premiere elements 11? It all works in this way, the constant entry in the Device Manager before and after the installation of a video is very annoying (also, I'm sure PrEl 11 would benefit itself from the QuickSync!)

  > found the solution was to disable my iGPU in Device Manager, then it works fine

  As far as I know, it's the only solution, because Premiere Elements is not really designed for double graphics cards

• very slow niswitch with signal connected (PXI-2535)

  First time using a switching FET card, running base vi where I connect a line and two columns, and make a measure of resistance with a multimeter.

  I found that with the digital multimeter connected, IE the applied signal, the switch may take more than 5 seconds to close. (Ohm DMM reading 26 ohms after 5 seconds, the 'debounce expectation' although all good reported vi)

  If the DMM is not connected, sometimes instantaniously. (disconnect the DMM, perform the trigger, connect the DMM - instant closing)

  Anyone experienced the same thing?

  Found the problem.

  Seems the FET card goes into protection mode if you do not connect the DMM - signal to the chassis GND.

  After that, it worked fine.

• L2Z17PA #ABG: HP Envy 15 - very slow start with Windows 10

  Since start installation Windows 10 times is extremely long, and usually the machine seems to be slow loading applications.

  I checked that Fast Start is turned on.

  Any suggestions to solve the popular situation.

  See you soon

  Thank you

  A combination of win 10 updates and by disabling some applications start has improved things.

  See you soon