Very slow printing wireless Photosmart 5524 or do not print

I bought a HP 5524 (CX047B) yesterday and downloaded the drivers from HP (Photosmart-5520 - series_v12.23.0). Today, it seems that the latest drivers are available for OSX Mountain Lion 10.8.3, so now I use HewlettPackardPrint2.13. I used the uninstall HP program before loading the drivers in both cases. Signal Wi - fi is good (Time Capsule from Apple 4th gen). The printer is intended for use by Mac users on a home network. At the moment it does not work properly.

I have not tried yet photo printing... I tried to print an e-mail I received (with diagram) using the USB connection, the results are very good. If I feel like using a WiFi print job shows 'print file accepted' in the queue... but nothing happens for 2-3 minutes, and then if I'm lucky the printer produces the header of the email. The printer then displays a message "Cancel" and ends by becoming free.

So for now, I have a wi - fi network printer that cannot be used f you walk your laptop up to it and use USB.

(FYI I used an HP B209a-m as a network printer wi - fi for 3 years without problem, until he decides for does not wotk earlier this week). Suggestions please. Clive Parfitt

Reset the printing system:

-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

Tags: HP Printers

Similar Questions

  • Very slow printing

    I just changed 3 6 ink cartridges in my printer Photosmart D 7460. Now it is printing very slow... takes about 02:00 for a single page to print.

    Any Suggestions?

    Yes - unplugging / plugging, power/power on, reset and check the contact points in copper - thanks for the link - it works beautifully now!

  • Portege R500 boot very slow when wireless

    Hello

    There was a post about it in April, but the only proposed solution was to create two distinct hardware profiles.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=117662

    The laptop is a model of ppr50e-04x048en.
    In the following scenarios, it gives the indicated start-up speed:
    -Switch physical wireless off, network cable connected - Normal
    -Switch physical wireless off, network cable unplugged - Normal
    -Physical wireless switch on, cable connected network - Normal
    -Physical wireless switch on, network cable unplugged - very very slow
    It's so slow that sometimes you don't get bored after 10 minutes of waiting

    There must be a better solution than separate hardware profiles?

    > There must be a better solution than separate hardware profiles?
    Don t think that there is a better solution, it was clearly explained in another view why the laptop does need more to start while the WiFi is enabled.
    If the WiFi is on the phone looking for a possibility to start from the WLan or research for some settings that might be received by WLan.

    On the other hand, you could try updating the BIOS and could check in the WLan card properties-> Advanced tab if there are some settings which could be disabled like Wake up option or similar.

  • After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

    I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

    However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

    I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

    So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

    I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

    Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

    My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

    When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

    You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

    If it were my system, here's what I'd do.

    1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
    2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
    3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
    4. Remove the temporary queue
    5. On my clients, I would remove the existing printer USB connections.
    6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
    7. Re-connect local printers.

    Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

    In a last time, I'll make sure to remove any old/unused drivers from the print server.

  • HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

    Hello
    My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
    Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
    Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
    Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.

    Thank you.

    © RedStarLimitless ©

    Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

    I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  • HP Officejet 5510xi all-in-one: very slow printing

    My printer takes forever to print a single page.  I got faaster to work at some point, but do not remember how and now it is not printing normally again.

    Welcome to the @Mary6268forums.

    I read your post on the matter of slow printing, you face your Windows 8.1 system when printing to your Officejet 5510xi. I have a few ideas in mind below for you to check and try, and I hope they help!

    1 be able to reset the printer:

    Turn on the printer.
    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.

    Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

    2. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

    3. copy of test. Copies also produce very slow?

    4. print from Notepad. The tests also slowly produce here?

    Let me know the results

  • Warning of Photosmart 5524 transport jam not clear paper jam

    My HP Photosmart 5524 seems to be in perfect working order but I can't move it beyond the 'Transport Jam' warning on screen.

    Have followed all the steps on the screen of the printer and the HP Web site.

    Mac OS x

    Running wireless printer.

    Thanks for any help.

    Hello @And1234 , welcome to the forums

    Check out the guide I posted below. If you have already tried all of the steps, please consider contacting HP directly to inquire about a replacement printer or a trade in option.

    A 'Transport Jam' Message displays for HP Photosmart 5520 e-all-in-one and HP Deskjet Ink Advantage 5520 e-all-in-One Printer Series

    Details of HP:
    If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada: click here.

    Best wishes

  • Computer is very slow, send me errors, and programs do not respond.

    Original title: Windows 10

    I have upgraded to Windows 10 and did not like it and changed back to Windows 7. Now my computer is very slow, it sends me errors, and the programs fail. What I do?

    Hello

    Please contact Microsoft Community.

    I understand your problem and will certainly try to help you with this.

    I suggest you try the methods mentioned and check if it helps:

    Method 1:


    You can run the fix that it provided on the link and the Coachman.
    Difficulty of Windows system performance slow computer problems
    http://support.Microsoft.com/mats/slow_windows_performance/

    Method 2:


    You can also try the steps outlined in the links to improve the performance of the computer.

    Optimize Windows 7 for better performance
    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Ways to improve your computer's performance
    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

    See also the links in the help:

    How to make a computer faster: 6 ways to speed up your PC
    http://www.Microsoft.com/atwork/maintenance/speed.aspx

    Slow PC? Optimize your computer for maximum performance.

    http://www.Microsoft.com/athome/Setup/optimize.aspx

    I hope this helps.

    Kind regards

    Anusha

  • The very slow printer response

    Sending a form or document to my HP F4180 take a few minutes to start.  If mult. pages, the delay between pages is also very long.  I have deleted everything what it have to do with HP, run set. cleaner and reinstalled the original drivers without success.  I installed the same driver on your laptop with XP OS, and with the same printer connected to the laptop, everything works fine.  This started a few weeks ago, but has failed every time. First noticed when you try to print the PDF files.  It got progressively worse, everything fails.  Any help would be appreciated.

    Printer problems in windows
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    The tutorial consists of 3 parts:
    Step 1: Check hardware
    Step 2: Use a troubleshooting tool
    Step 3: Update drivers

    Application Microsoft Support Fix It:
    http://support.Microsoft.com/mats/printing_problems/en-us

    Try this Windows tutorials:
    It consists of many themes that you can click and read the tutorials.
    There also an Fix It application
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
    http://support.Microsoft.com/ph/11732#TAB0

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Very slow (IntelliPoint) wireless mouse

    Since updated the driver for my wireless Microsoft dual USB receiver (IntelliPoint) mouse, the cursor has become slow & sticky a few times. I installed Windows 7 (64-bit). Before the updated driver click work has gone on win 7 (32-bit).

    Hello

    You are welcome.

    If you have any other questions please let us know, we are happy to help you.

  • HP psc 2175: very slow printing

    We had Windows 7 installed on our office and our HPpsc2175 printer is marked forever to print anything. I just tried to install the other driver Deskjet 450, and it does make a difference. Any other suggestions?

    Thank you.

    This is caused by the failure of one of your cartridges. I don't remember if the PSC 2175 will print with a removed cartridge, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

    If the printer will not print without the two coaches installed, you need to replace the cartridges; I would like to start with black as the most likely to be the cause.

  • my windows media player is VERY slow to start, sometimes stops working, will not play some videos

    When I run the program it opens but will not play a song sometimes longer than 15 minutes. Stops working and the screen will sometimes foggy transparent white - I can still see the player, but he has a white on fog. Today, that happen when you try to copy a cd. -just a regular old cdr.

    Show first frame of video and play a sound but video does not move. Windows vista-home premium-toshiba.

    I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

    -Restart the PC.
    -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click on the service and click on stop.
    -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
    -In this file, rename the old Media Player like Media Player folder. If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
    -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

  • DeskJet 2544: hp deskjet 2544 suddenly prints very slow but quickly copies

    I have had this printer for about 6 months.  Things were very good.  Recently, it started very slow printing.  I read it could be weak cartridges so even if they had both ink, I replaced the.  I have nothing but HP used since the beginning. I noticed that she copy quickly, but print very, very slowly.  Any suggestions? It has been connected wireless but I stopped that and we hung usb thinking that was the issue.  But no. I should add it is connected to a Dell AIO

    Hello @sues2015!

    Thanks for posting on the HP Forums!

    I should be able to provide suggestions!  I can see that over time your printer running slowly when printing from the computer wireless or USB connected.  If the printer is capable of performing a photo copy at normal speeds and then indicating that the equipment is working correctly and you are probably looking to a software problem in the computer.  Also if the printer is having the same problem USB or wireless connected pointing more fingers to the software.

    The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

    To uninstall the HP software, click here: uninstall the HP software

    To perform a disk cleanup, click here: perform a disk cleanup

    To download the HP software, click here: HP Deskjet 2540 all-in-One Printer series full feature software and drivers

    If please, after back and let me know how everything goes.

  • Office jet pro 8620: office jet pro 8620 very slow to print

    what I can do to solve this problem, very slow printing: my printer has taken 1/2 hour to print 6 pages, only bought a few weeks ago.  I can't find a solution. I will try the solution on the post of Shawn D, b (ie the replacement driver), but nothing is selected on the page of time. therefore impossible to remove until I know what to delete!. can anyone help.

    Robyn

    Robyn

    Hi @ratts,

    I see that your HP Officejet Pro 8620 is very slow printing on Windows 8.1. I'm happy to help you!

    A few questions for you, if you don't mind:

    In the meantime, please see this post, Re: HP 8620 seems slow printing, by my colleague @Rainbow7000.

    Hope this helps, and hope to hear from you soon!

  • We have a printer All - in 6110 and very slow to print. a page in 30 min. new ink cartridge.

    We have the all in one 6110 and now its very slow print new ink cartridge and the downloaded drivers but it shows only a page in 20 to 30 min. is not a difference in color or black and white.

    Help, please.

    This is caused by the failure of one of your cartridges.  I don't know if supports Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

Maybe you are looking for

  • 14 z010-nr of flow: flow HP 14 - helmet

    Hi all Normally not reach out for support, but I'm in a dead end with this and have been stuck on this for weeks. The headphone jack of my flow 14 has a strange behavior. When I plug in headphones, it sounds like I listen to what was going to be preg

  • S3000 BIOS update - X 11 satellite

    Hi all I have received recently a laptop S3000 - X 11 and am having a problem to update bios so that I can get the graphics drivers to work I downloaded the BIOS to support file, but the laptop just says it's the wrong version for this model! can som

  • Disks hard Mac Pro goes wrong in a Bay

    Hello everyone. I have a weird situation here. I have a mac pro with four hard drive bays. I have replaced three hard drives now in one day, two Bay. It cannot be bad three drives in a row. Does anyone have any recommendations why I could eat hard di

  • Tree control double-click the default behavior

    Hi all Tree control has a default behavior that expand / reduce point when the double click event occurs on the parent element. How can I to avoid this behavior to use double custom click event without open close nodes? Thank you concerning

  • Late game development

    I have an Asus U50 brand new and some of the games I have are late when I play. The games are Blacksite Area 51, Wheelman, and Prototype. I have all the latest updates on the computer. I was wondering if you could help me and try to solve this proble