Very strange problem with my graphics card.

Similar Questions

• Problems with the graphics card when you use AutoCad

  Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I suggest you to try installing the driver in compatibility mode and tick.
  Reference:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us informed.

  Thank you

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Problems with the graphics card

  Hey, so I spent recently to my laptop HP Pavilion of 15-n298sa of a windows 06:52 and she since has earned me an endless stream of problems, especially with my graphics card. As I am on break from uni I re-uploaded all my games on my computer and found that none of them bar those made before the middle of the 2000s, play for me and for all name them my graphics as being the problem - like solitaire spider fact etc. All have previously been playable, about a month ago, so I know that it shouldn't be a problem. I tried several times to install the graphics drivers (one-I can't remember their names - AMD would apparently install and that NVIDIA could not). When looking at the Info for the graphic drivers installed, "Standard VGA Graphics Adapter" that it's 2006 so I guess that AMD, it has not actually installed / was done wrongly. I was wondering if someone could help me?

  BTW, I'm a complete technophobe and total so if you have an idea of what to do, I would appreciate it if you could put it in other words, because I am a plonker when it comes of this.

  Hello:

  See if this graphics driver works.  Your computer laptop is only the graphics card Intel HD 4400 so don't expect too much of it.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24392

  Product sheet of your model...

  http://support.HP.com/us-en/document/c04102914

• Very strange problem with quick mask

  Hoping someone can help me with a very strange problem that just started to happen when I enter the quick mask in PS CS5. Let me guide you through the problem.

  (1) I opened my image in PS, go in the Mode mask quick and 'paint' my image in translucent red with a brush (100% of opacity, brush, etc. normal mode).

  

  (2) once I fully painted my picture in translucent red, I leave the Quick Mask mode and the area outside the translucent red is selected. I hit M for the marquee tool, right-click on the picture I have just painted and choose 'Select inverse', which then selects everything within the translucent red area (note that I made this a million times over the years).

  

  (3) my image is now selected. In general, what I do now is cut (cmd + x) that selected the image and paste it into another canvas, generally where is my biggest project. Whenever I did it, the image cuts and fits exactly as it is seen and leaves an empty space in the original image. However, when I cut it now, it seems to cut a transparent version, leaving behind a transparent 'ghost' of the original image.

  

  (4) then when I paste the image cut in a new canvas, it is transparent as a default value.

  

  I checked the transparency of all the paintings, and they are set to 100%. As I already said, I cut from images of no solid media using the quick mask all the time and it's never happened before. In fact, I made this weekend and it has only just begun in the last hour, so I think I clearly something clicked or activated a parameter without realizing account!

  In considering this explanation, I hope someone knows what is causing my pictures to cut and paste transparent after that I used the quick mask. It certainly is driving me crazy!

  Any advice or assistance would be most appreciated.

  Thank you

  In your first screenshot the color of foreground in the Toolbox is not 100% black (RGB 0,0,0)

  Until you try the quick mask, press D to set the foreground on black (RGB 0,0,0)

• HP ENVy 4 1102tx: big problem with computer graphic card hp laptop

  MY computer laptop hp envy 1102tx running 64-bit win 8

  When I bought my laptop there were some problems with the display, she would get destorted occasionally. But over time, this problem became worse as

  1. display and sometimes audio would get very disttorted that seems to be the screen flashes, but if I run a game or high demanding software chart everything is normal.

  2. sometimes touchpad and some keyboard keys stop working

  I tried

  1 system restore using the recovery partition

  2 update screen adopting several times

  3. when I got my laptop the customer, what they came up with a temporary solution to a deactivation of the adopter display amd

  but adoptive parents to display like this switching is so boredom

  Is there a permanent thanks to this problem?

  When some people are updated there victory hp 8 machines 8.1 that they also get the screen black on startup, why is this? is this an inherent problem with the time between two different graphics cards?

  Hi @lima619

  Welcome to the HP support community! I see that you have some problems with your desire to 4. Try to install your driver high definition Audio Intelas it should be the graphics card that manages the basic functions. I'd also sure that your Catalyst Control Center is only the Setup for your high performance games and programs. This HP document will show you how do it.

  By system restore you did take back you to factory defects as in a collection or just go to a previous restore point? If you have a full recovery to factory settings then it seems like it might be a hardware problem with the keys / TouchPad if they start working again.

• Pavilion 15-n023cl: Windows 10 problem with AMD graphics card laptop Pavillion

  Upgrade to Windows 10, but it can only function in Mode without failure.  Installation seemed to go very well.  At the start of Windows 10 for the first time, developed the background of the desktop and the taskbar, but not the icons on the desktop.  When I put the cursor on the task bar, it shows that the system is busy.  The screen flashes then between black and the wallpaper image, with the bar to come a fraction of a second before the background image of the tasks.  These images alternate with an interval of one second.

  Microsoft advised me to update my graphics driver, but the system shows that I have the latest version of the driver for the AMD graphics card.  Any advice?

  Found the problem.  The 8510 G AMD Radeon HD display device is not compatible with Windows 10.  Only the 8570 and higher series models are compatible.  It would be good if HP had some sort of program or advice to help us Pavilion 15-n230cl owners spend so we can run Windows 10.  Restored Windows 8, everything is back to normal.

• Hi I had a problem with my graphics card setting when I'm playing in world of warcraft

  My computer is Alienware 17 x. My graphics card is Nividia 9400 M model 260 m. and 4 Giga RAM
  Is processer Duo T9500 * address email is removed from the privacy *.
  my computer is very fast with this game. However, when the player are longer, the fps in the game decreases up to 10 and below.

  Please help me fix this great grace

  Hello qiwei686,

  Thank you for using the Microsoft Windows Vista Forums.

  You always have experinced this problem for the game World of Warcraft or that has recently started to happen?  I have provided two links below for help on this game regarding latency while playing.  They are the steps listed below for troubleshooting.  Thank you!

  Why have I not such bad lag?
  http://us.Blizzard.com/support/article.XML?locale=en_US&articleid=19823&PageNumber=1&SearchQuery=game+lag

  How to read the indicator of latency?
  http://us.Blizzard.com/support/article.XML?locale=en_US&articleid=20401&PageNumber=1&SearchQuery=game+lag
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• problems with the graphics card after installing windows 7, code 43

  I installed windows 7 & my ATI-RADEON XPRESS 200 SERIES is stopped by windows 43.It code stipulates that drivers are ok... but it is not recognized... I also downloaded a few 3d Screensavers & they worked very well now, it is not able to open the screensaver because of the video card or to be compatible with Direct 3D... This question has not pop up until after you have installed windows 7, I have checked & found a lot of problems with windows 7 & ATI-RADEON XPRESS 200 SERIES drivers or recognition. Tried to update the driver but the States, it is far, but windows 7 is having a problem with drivers... Y at - it a fix for this, looks like it should be a matter of windows & microsoft should have action corrected problem because windows is caused this problem... Have installed all windows updates & all up to date... Can someone try to give me a solution to fix this problem? Not sure if they have an upgrade or accelerator program 3d graphics that may have to be installed... & again thanks if anyone can help... Have a great day...

  ATI-RADEON XPRESS 200 SERIES is an accelerator of limited DirectX 9 graphics (integrated graphics), which was

  published in ' 07 and apparently is not compatible with Win7.

  Old hardware with a Windows version compatibility isn't something that never gets fixed by SM.

  It is the mfg of the material to support the product through a driver updated, and trend of integrated graphic card

  not be supported as long as a dedicated graphics card.

  In this case support drivers apparently stopped with Vista.

  If you try to get drivers via Device Manager or Windows Update they can provide incorrect information

  What about drivers who are up to date.

  These two methods are a little known does not install the proper drivers for the graphics.

  I read that some people have had luck on Win7 with the Vista drivers for various materials. Doesn't hurt to try.

  You can download the drivers for XPRESS 200 SERIES from the AMD website below-

  http://support.AMD.com/en-us/download

  .

• Device Mgr shows a problem with the graphics card

  Mgr. device initially says Code 10, I downloaded a driver (zipped) website of the SiS to 2003 (in the era of the PC)

  Right-click the compressed file, the shortcut menu contains the option "unzip" the files... Unfortunately these just led changing code code 10 code 1... basically the same problem I got it... either the pilot is wrong or not installed.

  Tried again, using Cnet, it was a similar vintage but this time "Winzipped.

  So that I could "unwind" that zipped, I can't do the same thing with the Winzipped file, the shortcut menu does not include an option "unpack".

  Double clicking on it opens a ' run ', which opens the "Winzip self extractor" that has a button seems fair to transfer the file 'compressed' to another location.

  This has the effect that the file is invisible to the driver installation wizard.

  Question:-how you uncompress the Winzipped file so that the driver can be installed?

  Question:-how to install a driver for this graphics card?

  I finally managed to find a driver package actually installed and friendly user who was not compressed with the 'winzip' dratted unfussy... Wow! almost as good as Linux!

  Hello

  You are welcome.

  We are happy to know that your computer works as expected. Please do not hesitate to contact us back, in the case where you are facing in the future other problems with Windows.

• Monitor question: is constant ripple read something difficult - if this isn't a problem with my graphics card, what else could he be >

  It is difficult to describe. I run XP and later that yesterday to fuel my system, I noticed that the monitor was something different for the first time - the perifrial on my hp2011x monitor field had developed these mirco-wave that makes viewing anything a bit difficult. Thinking that it was temporary, I just moved everything I was working on the center of the screen - which remained essentially stable. After having finished up last night, I turned off.

  Today, however, it's another story. Now, the whole screen was made in such a way that everything is now visually corrugated - which seems that ripples are moving up and down in a horizontal jet across the entire screen. And this annoying effect is much more important, making it difficult for the eye to read anything for a long time.

  What could be the problem here?
  Thinking it might be a problem of monitor, I borrowed a friends monitor - exactly like mine, but the effect continues.
  If not, a sign that the graphics card is out, what else could be the problem?

  Thanks for your help.

  Hello

  You think that this problem could be related to the graphics card.

  Method 1: You can see the steps mentioned in the article below

  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960

  Method 2: Start your computer in VGA mode, then check if the display problem persists. To do this, follow the steps mentioned in the link below

  Activate the Mode of VGA (Video Graphics Array)
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_overview.mspx?mfr=true

  If the problem persists, you can communicate with the computer or the adpater manufacturer to address this display problem.

• A very strange problem with DVD player (some DVD play not)

  Hello everyone.

  I bought a laptop Dell Inspiron 3543 2 months ago. Overall, I am very satisfied with this product, but I have a problem with the DVD player. When I insert some DVD discs, the driver reads some DVDs but not others. After trying to play DVDs, I see that the DVD player play about half of the DVD I'm looking for. Although I can guarantee, I didn't send my laptop to the service because I can't work even a day without my cell phone. So, in order to solve the problem, I bought a DVD player new, original Dell (the same model of dvd player, which is Panasonic Matshita DVD +-RW UJ8E2). Today I started using my new DVD player, but it also has the same problem as my old DVD drive or it also does not play some DVD.

  To make the issue even more strange, here are some details:

  -My dvd drives have no problem and I have tried many original DVDs (especially the original films). And all the dvd disks that do not play on my computer play on other computers with no problems. There is no problem with the disks.

  -Certainly no problem with the "DVD region Code". I use original DVDs with region code 2, which is the area code for my country.

  -All my drivers, the operating system and the dvd drive drivers are up to date. When I look at my DVD drive properties, it is written that "the dvd drive works properly.

  -When I insert a DVD disc, if my DVD player he plays, he plays each time. But if my dvd player does not play a dvd, and then he never plays it. So, there is a consistency in the dvd disc set to play or not. When a DVD disc does not play, my DVD player rolls the drive some time and then the DVD done pretending as if there is no disc in the drive.

  -Both my old and newly purchased DVD drives have exactly the same problem, so I think that there's no problem like a lens dirty. I also think that there is no mechanical problem with one of my DVD drives because my newly purchased, original DVD player also has the same problem.

  I thank everyone for any help or advice in advance.

  Today, I received my dvd player third, new, Chinese, not original from a seller of spare part. He plays all DVDs with no problems. :)

  If in the future someone always has the same problem as me and read this Web page to find a solution, you know where is the problem.

• Huge problem with the graphics card. Help me pls!

  Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

  I have Dell Inspiron 580

  

  Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

  

  And yes my pc used to run with Nvidia I have proof: P

  

  I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

  I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

  Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

  Any advice? It will go to normal if I reinstall windows?

  Thanks guys and sorry for my bad English :D

  Hi Georgina26,

  You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

  If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.

• problem with my graphics card

  I have a hp laptop G6-2024tx

  the problem is that iam cannot use my Graphic card playing games

  my graphics card is amd radeon 7670 m (2 GB) and 3000Hd intel time ever iam trying to play games it only detects my Graphic card intel

  not able to use my laptop full performance IAM

  Please help me what is the problem

  Using Windows 7? Have you recently done with the software updates? Make sure that you have installed the AMD graphics driver which can be found here: graphics driver AMD high definition (HD)

  -Sean

• I have a problem with my graphics card in switching

  Hi Dell Community

  I recently bought a laptop Dell Inspiron 5521.

  I opened a video game and noticed it was a little laggy on high detail settings (Dragon Age 2), I went in the configuration of the game applet and discovered that I could choose between two options for my display driver (both options are 4000 Intel when it comes to be the dedicated AMD graphics card).

  I opened the CCC and allowed the game to use the high performance ~ ~ ~ didn't WORK

  I tried to disable the card intel 4000 in Device Manager ~ ~ ~ MADE things WORSE

  I opened DXDIAG ~ ~ ~ for some reason, the two '1' and '2 'sign up as Intel HD 4000 display

  There is no settings in the menu of the BIOS to disable the Intel HD 400

  I really want to play this game in detail using my dedicated graphics, ALL SOLUTIONS?

  Shabibo

  Thanks for the reply.

  The game does not work with the AMD GPU.

  I will try to update the game and get back to you on this one.

  Hi SHABIBO,

  We truly regret the inconvenience caused to you. Please check the same thing at your convenience and let us know.

  You should consider to remove two video drivers and install them again. Please let us know the version of windows installed on the system.

  Keep us informed of the results if we can advise you further.