VERY, VERY strange table import/excel/number - help please

Similar Questions

• Images in lightroom are VERY DARK in the library? Help, please...

  I have been using Lightroom for a while now and have had no problems.  I recently opened lightroom and all images in the library are now extremely dark and contrasty (I did not any changes).
  
  When I open the RAW files in PS or bridge etc they look very well and when I export images from lightroom as JPG they are very good, it seems like it comes from the way in which images are displayed in Lightroom.
  
  What am I I am doing wrong and how can I solve this problem?
  
  Your help is very appreciated.
  
  Thank you

  Since you're under XP: right click on the desktop and open the display settings, color management and see which profile is loaded. If you have an Nvidia card, you will only be able to load a profile for two monitors. If not calibrated manually it should list sRGB as the default profile. If this isn't the case, set the sRGB as the default until you re - calibrate manually.

  You have not to calibrate your screen, you did? You should really get a Sypder - or any other device appropriate to your choice - and calibrate your screen.

• Trying to do a very simple tone of scanning. Help, please!

  I'm trying to accomplish a very simple tone:

  The tone must:

  -Start a 325hz database frequency

  -Less than 250 Hz

  -Sunrise at 400 Hz

  -Back to 325hz

  -Do this 1 time on 72 seconds

  Can someone instruct me upon completion of this in Audition 3.0.1?

  Thank you!!!

  You will need to do this in three sections by using the generate/tones menu. Firstly the frequency setting Initial 325 value and the Final setting to 250. Then the section from 250 to 400. Finally, the 400 return to 325. You may need to vary the lengths of the section because the frequency ranges are different. The first will, and the second is more or less equal to, say, 30 seconds each and the last 12 seconds. You will have to juggle the time to make it sound even. Then just edit the three sections together making sure that you join them at zero Crossing points.

  Or you try to generate a continuous tone of 325Hz for 72 seconds and try to manipulate the Pitch Bender effect.  Unfortunately this gives only the key change music semitones then you might have trouble getting the upper and lower frequencies quite accurate.

• First Pro CC 2015 VERY SLOW while trimming clips. Help, please!

  Whenever I'm going to cut a clip using the "Trim" in CC2015 of the ORGANIZATION, the program hangs just for 30 to 60 seconds. EVERY TIME. As you can imagine, this makes editing a video marriage within a certain time for a customer near impossible and frustrating. Once the program ends hanging around for a good bit of time, the topping I did just did what I wanted to do, but as the costs of my precious time. It has only been a problem since I upgraded to the 2015 version of first Pro CC. Any help at all would be greatly appreciated.

  Disable

  see if this will help.

• Can't export MPEG2-DVD! A very weird situation... Help, please!

  Hi people,

  I use the Pro for years.

  Currently, using CS6 - a new installation of the cloud from a few days ago.

  So, I have a DVD loan project.

  File / export media... This will display the export parameters.

  I choose MPEG2-DVD format with Source Match attributes as the preset, then press in the queue.

  Normally, it would export to Adobe Media Encoder queue as .m2v, but for any reason — it is not intervened.

  Instead, Adobe Media Encoder removes the MPEG2-DVD format and replaces with the AAC Audio format!

  What the?

  

  I'm losing the plot? Did I miss something?

  File / export Media / Format-MPEG2-DVD = file .aac (only) in the Adobe Media Encoder?

  Thank you Ann.

  It turns out that I had missed an update for Adobe Media Encoder in Adobe Application Manager.

  I had installed the software yesterday and so I assumed I had the latest version. I was wrong.

• Comparison of simple table does not. Help, please!

  I struggled with this problem for a few days now, and I'm slowly losing my mind.

  • I am in Adobe Acrobat 10.
  • I have a field called button group: btn0, btn1, btn2, etc..
  • I have a band called text fields: txt0, txt1 txt2, etc..
  • I have a script that takes the value of txt0 and makes the legend of btn0 and so on.
  • I have a script that sets the btn0 to setFocus txt0 MouseUp action, and so on.
  • These scripts work very well.
  • I have a script that takes values of all fields txt and sort puts them in a table.
  • I have a script that takes the array element [0] and makes the legend of btn0 and so on (alphabetical list of buttons).
  • These scripts work very well.
  • I am trying to compare the value of the array element [0] to each field txt to find the match, then set the action MouseUp btn0 to setFocus to the corresponding txt field, and so on (until my alphabetical list points to the correct location).
  • It is here where I am at a loss.

  Here's what I have:

  specified fields txt

  txt0 var = this.getField ("name of Z");

  txt1 var = this.getField ("name");

  etc.

  put their values in an array named rxArray

  var rxArray = [txt0.value, txt1.value]; etc.

  sort the table

  rxArray.sort ();

  Set the legends on the sorted array elements

  for (var i = 0; i < 5; i ++) {}

  var b = ("btn" + i);

  this.getField (b) .buttonSetCaption (rxArray [i]); works very well; sort by alphabetical order of the list of buttons

  Here is what goes wrong

  for (var x = 0; x < 5; x ++) {}

  var r = ("txt" + x);

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  }

  }

  }

  end

  Here's what I know:

  Alphabetical order and labeling works very well, but the MouseUp scripts to buttons work at all. Nothing happens.

  If I change the piece next to the above script:

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  To do this:

  If (rxArray [i] == txt1.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  Because rxArray [0] is equal to the value of txt1 ("name"), then the MouseUp script for btn0 Gets the value:

  Txt4.SetFocus ();

  So I know that, whenever the nested loop runs, the case statement is true, and the setFocus script updated. Until the end of the loop, leaving the setFocus as last run element. Then why my script does not work? It should only update the setFocus script IF the array element matches the txt field and it is on THIS field of txt.

  Please please help. I know I'm missing something simple somewhere.

  I don't see why you would need tables at all... For example, sortNumber.

  You can essentially all this code replace it with this:

  for (var x = 0; x)< 5;="" x++)="">

  var t = this.getField ("t" + x); the text field

  var b = this.getField ("btn" + x); the button

  b.buttonSetCaption (t.value);

  var s = "this.getField('"+_t.name_+"').setFocus()";

  b.setAction ("MouseUp", s);

  }

  It is the same for the rest of your code as well.

  With respect to the addNew function, you must add a pause command inside the if statement to prevent continue further after the first empty field has been found.

• Serial number help, please!

  Trying to download my new Adobe Photoshop Elements 10, I get the message that my serial number is not valid.  I entered and returned from the many correct numbers (the number on the back of the disc case) but still keep the error message.  Please help - any advice will be appreciated!

  Thank you very much.

  Beveni99 I recommend you to contact our support team, because they can examine your serial number and make sure it is valid.  For the best support, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to solve the problem you described.

• Numerical simulation of e/s of FPGA on the development computer - strange results... Help, please

  Hello

  We ordered a 7851R DAQ card which we
  have not yet received and we try to simulate using the
  Setting "computer development".  However, I can't seem to get the OID
  to work properly. In fact simply opening "digital line input and.
  Example of output.VI' does not have to wait for results. What happens in the
  example of file is just, the indicators flash constantly and are not affected
  by controls. Is this a known problem and I just need to wait for my
  material or have I done something wrong?

  Thank you!

  Michael

  You don't mention what version of LabVIEW you use, but if
  you use a LabVIEW 8.6, there should be basically 3 options for
  Debug / simulate your VI on the development computer.

  The
  first is to run the VI on the development computer using random
  data for FPGA of e/s data.  I suspect that this is the option you
  currently using and only can be useful if a large number of logic in
  your VI depends on the values of the e/s database.

  The
  second option is to use a custom VI which provides FPGA simulation
  E/s data.  That sounds as if it was what you are looking for.  When you
  Select this option, you will also get a button you can
  Press to create a VI model that can be used to create your custom
  VI. If you look at the diagram of the VI model, I think that it
  should be relatively simple to understand how to insert your
  custom code.

  The third option is to run the VI on
  the host but the use of I/O of the real world.  In the latter case, a default value
  bitfile is automatically downloaded to the FPGA for you and the data is
  transferred from the device by the driver.  Of course, you cannot use
  This last mode until your material does indeed.  I hope this helps.

• Problem with the version number - help please.

  Hello, my Avast reports that my Skype is outdated and must be updated with the latest version, (7.8.0.102), but when I goto Skype help and updates, Skype says I have the latest version already installed (7.7.64.103), what happens here, can someone explain the discrepancy PLEASE?

  Cheers from TekyTek

  For later use, download (download Skype) on this site section, allways will give you the installer for the latest version (7.8 in this case) when available, even if your ' check for update ' tell you that you have the latest version.

  Just make the file skypesetup right click and select Properties, the details tab will tell you which version the Downloader is for (or in the case of a complete configuration file, what version it is).

• BlackBerry smartphones important, I want help please check this massage

  Hello everyone

  I have a big problem and I want someone to help me.

  my blackberry phone is (Bold 9790)

  and its brocken, I'll buy a new and even bold 9790

  If I walked into my blackberry ID will be back again once the contacts?

  and my bbm contacts will be back again with the same PIN?

  Please tell me<>

  Kemozah1 wrote:

  If I walked into my blackberry ID will be back again once the contacts?

  What contacts? Your address book... IF you have BlackBerry Protect installed and running on your old device, Protect restore data including your address book and other data. See more here:

  How to use BlackBerry Protect to restore data to a BlackBerry smartphone

  Kemozah1 wrote:

  and my bbm contacts will be back again with the same PIN?

  Please tell me<>

  BBM contacts are not saved with Protect. However, using the same BBID, they will be restored if your previous 9790 had BBM 7 installed. Your BBID restore BBM contacts.

• Smartphones blackBerry Strange question... Help please :)

  Hello everyone, I am Ozzy, and this is my first post (I think?) on the support forums. I hope you're all well on this cold day today.

  I was hoping you could offer me help on issue of ths that I'll explain in details.

  Info on the device
  I have a Bold 9700. Device is unlocked and I use it on Tmobile.

  Apps - I just last night installed CF Google and Google. I removed Score Mobile earlier and am now remove scoremobile fc to see if it wil solve my problem.

  File before and after a battery to remove/replace. (Go to settings, then Options then status):
  I have 43.8 MB free space left (Woohoo!, I managed to find a lot of free space since OS6 installed 2 months ago now, have not had problems surrounding this OS install )

  A battery pull fix your problem?
  Nope - I did several battery grips without my question being fixed. Im making a new one because I deleted an application.

  Installed apps and their version if possible. (Go to settings, then Options, then applications):
  Once if necessary

  BT device model/version (you have to look at the BT device):
  ????

  Well, until this morning, 08:32 my device connected to the internet totally don't fine - no problems.

  Now, I can not connect at all! I tried a BBM ping and test the message to a friend, I sent my service books, made 6 or 7 battery pulls and uninstalled apps that I installed last night. Despite all this my phone doesn't let me connect to the internet.

  Twitter says "loading...". "because I have messages from refereshed, Opera Mini is not connect and my native browser is not connect either! The service books that I resent have not come back to me again?

  I got a free internet for totally centuries now, this could be the problem? . Would Tmobile took my free internet? It was working fine this morning, but . Voice calls seem to work fine (although I have no credit to make calls, the Lady at tmobile voice connects and sounds good).

  Also I dropped my phone too, but only from the bed to the floor (and not a high level on the floor).

  Any advice? I feel lost without my BB operating . It's a part of me why are not the service books

  HIE Ozzy, it comes to your first post in fact unless you have a different user profile. About your problem, a thing of interest that I see if the fact that you were able to surf the internet for free for ages. BlackBerry services are paid for about US$ 10 per month. Maybe you were lucky and now the deficit has been filled. Then, contact your service provider and ask your BIS account status, maybe they will give you an answer, or else you can start paying for the data service on a monthly basis to the access service.

• I can't download the creative cloud on my Mac, it says: error #1 which is not in the table... Help, please

  I want to download the trial version of Adobe Illustrator

  Hi Alexandra,.

  And what is suggested above, you can also follow the below mentioned thread:

  Cannot install creative cloud office. Error code: 1

  Cannot install creative cloud office

  1 ERROR CODE

  Error code 1

  Error code 1

  error code 1

  Thank you

  Yann Arora

• I installed Win 7, sis discovered downloaded illegally, ran XP and now how do I get rid of Win 7? Help, please! VERY IMPORTANT PLEASE AND THANK YOU!

  Okay, so I came one day at home to find Win 7 Ult on my computer. It turns out that my sister downloaded illegally, which I had no idea until it crashed my computer. He stopped working out of a reboot, I therefore had no choice but to run my backup version of Windows XP Professional. I wanted to keep the files of windows 7, I had some important docs ther, so I installed Windows XP under the C:\WINDOWS.old file and it works from there, and win 7 is in the C:\Windows folder. I have only one disk-37, 2 Go C, so I need all the space I can get. I don't know much about computers, but how do I get rid of Win 7 files which absorb almost 10 GB on my hard drive with Win XP works well? Win XP is activated and genuine. I heard someone say "Format the C drive", but then I read about it online and found that it could make my computer unusable! I don't know how to fix it! Please help me, it's very important that I have solve this problem quickly, I am sinking money in flash drives and CDs. help, please and thank you!

  In addition, my system is a Dell GX280 series, pentium 4 with 512 MB of RAM, or 502 a 37.2 GB C drive. It has been renovated and came pre-installed with Windows XP.

  The BIOS and Windows are not the same, you cannot make permanent changes to the BIOS settings only.

  When you format your hard drive it will wipe all information off of it (it's your personal files, Windows, everything, etc.), but your computer still won't turn.  Your can configure which devices to start the system turn off the first, so when we need to start installing Windows from a CD, you need to configure the BIOS first boot device to be the CD-ROM drive (follow thesteps to clean install xp).  You must ensure that your CD of Windows XP is in the CDROM drive ready to begin the clean install, and there should be a point when your system say "press any key to boot from the CD-ROM...".

  You can also follow the procedure here a clean installation of Windows XP: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

  Your email address was removed for reasons of confidentiality, but unfortunately I do not use my email address for support... only use this website :)

  --> I hope this helps! Please vote or mark as correct answer if it doesn't :)<>

  http://www.xinx.co.uk - my Web site | http://www.systems-and-solutions.co.uk - where I work

  
  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Import excel tables in InDesign and retain formulas

  Hello world

  I need to update the style and format of a bunch of old forms that were made in Excel, to match our new style guide. The problem is that many forms understand formulas... What can I do to make these in InDesign? And they will always be there if I create a PDF to fill out on-line that users can fill it with Adobe Reader?

  Thank you very much in advance for your help,.

  Christine

  InDesign cannot read and/or analyse Excel formulas. Excel puts the formula in a cell and adds last result, and which is read by InDesign to plain text. It is rather the opposite: to get a 'formula' in ID, you will need to fit in plain text in Excel (once again, see you in ID in plain text).

  Nothing to fear: Excel is very bad in the formatting of the text; ID, on the other hand, excels in the present.

  Table styles have absolutely nothing to do with it. They are for tables formatting , not for the calculations. Moreover, these Table Styles are integrated into IDS since the CS2 version - last is CS4.