VGA voltage error message is out motherboard safe voltage 12,0

Similar Questions

• I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.

  I'm not tech guru when it comes to computers.  I don't really know enough to get into trouble.  Here's my problem.

  For the last six weeks or so, I keep getting dropped offline.  AOL is my browser and I get the message "your AOL software has encountered a problem" or words to that effect.  Tech AOL were useless to solve the problem.  I checked my error messages and noticed that when I fell off line, most of them involved a WININET problem.  I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.  It's just a guess on my part, but the problem becomes very irritating to say the least.  So, if someone can you please throw some light on my problem it will be greatly appreciated? This WININET error message might have nothing to do at all with hit his offline, but thought I'd ask at least satisfy my limited knowledge of computer programs.

  Thank you

  Gordon

  Gordon

  To see if your system or software from AOL, what happens if you connect to AOL by using another browser (like Firefox or IE)?

  Wininit is part of the operating system and usually if it was the problem you would have other problems on your computer then I suspect it's an AOL software

• Error message is out-of-the box joins to the custom error message?

  Hi all

  I try to display the status message of return 203 CyberSource below.

  
  

  "The general decline of the card. Any other information provided by the issuing bank.

  
  

  
  

  but, I see the error message out-of-the box "[cardType] credit card could not be authorized for payment: general decrease of the map" is adding to my error above.

  
  

  Please tell me how this happens and how to stop adding error meessage custom out-of-the box to my message.

  Thank you

  Vishnu

  Hello

  the string of pipeline authorizePayment (/ atg/commerce/command/processor/AuthorizePayment) is the addition of the error. The message is defined in the resource bundle \atg\commerce\order\OrderResources.properties. In theory, you can change the message by substituting the resource group in the DCS\lib\resources.jar\atg\commerce\order\OrderResources.properties file.

  David

• audioeng.dll error message check out iTunes or any program that uses sound

  audioeng.dll error message on Windows Vista 64

  Here is the still unresolved audioeng.dll error message during the startup of iTunes or any other program that uses sound:
  "C:/windows/system32/audioeng.dll is not designed to run on Windows or it contains an error.
  Updates to Vista 64, probably after one of the windows

  have not found a solution yet.
  Please answer if you know the answer to that.
  Thank you.
  -i.

  Yay!
  I fixed it!

  Here's how:
  I looked at the advice of Robert (thanks Robert!) and thinking that it is must be a typo - 64-bit should be Wow, not sys32, just hypothetically.
  So, I checked my Wow folder and found 0 bytes audioeng.dll there as well - I didn't replace yesterday with snached dll, I only replaced front sys32. The same dll is used twice by the system.
  I decided to take the risk to replace with the same dll snached.

  Here are my steps:

  1. Tear off the healthy donor machine DLL
  2. Start the bulb--> cmd with admin permissions
  3. in the command prompt writing
  • takeown /f C:\Windows\SysWOW64\AudioEng.dll
  • ICACLS C:\Windows\SysWOW64\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\SysWOW64\AudioEng.dll
  • takeown /f C:\Windows\System32\AudioEng.dll
  • ICACLS C:\Windows\System32\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\System32\AudioEng.dl

  Make sure you did it in both places.
  Enjoy!

  Thanks a lot for all help.
  I really appreciate it.
  -Irena.

• Error message of out game card

  Hello world

  I make a deck of cards with two sets of brewing. Two decks cards are also expected to flip and drag. My first apron works well, but in my second game, the map will not return. Whenever I try to return the card to the second bridge, I get this output message:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at Wicky / clickCard)

  I get no errors in compiler for the moment, but I get this message every time I click on the two bridge. Drag the map, but it don't flip, and this error message is displayed. Does anyone have an idea hence is my mistake maybe?

  I have two files, Wicky.as and Wicky.fla. Here's the code for Wicky.as. Thank you in advance for your help!

  Wicky.As

  
  package {}
  import flash.display. *;
  import flash.events. *;

  SerializableAttribute public class extends MovieClip {} Wicky
  game constants
  private static const boardWidth:uint = 7;
  private static const boardHeight:uint = 7;
  
  boardOffsetX:Number private static const is 120;.
  boardOffsetY:Number private static const is 45;.

  private var firstCard:Card;
  private var secondCard:Card;
  private var thirdCard:Card2;
  private var fourthCard:Card2;
  
  public function Wicky (): void {}
  Make a list of card numbers
  var cardlist:Array = new Array();
  for (var i: uint = 0; i < boardWidth * boardHeight; i ++) {}
  CARDLIST.push (i);
  
  }
  
  var cardlist1:Array = new Array();
  for (var j: uint = 0; i < boardWidth * boardHeight; j ++) {}
  CARDLIST.push (j);
  
  }
  
  create all the maps, their position and assign a randomcard to each
  for (var x: uint = 0; x < boardWidth; x ++) {/ / horizontal}
  for (var y: uint = 0; y < boardHeight; y ++) {/ / vertical}
  var c:Card = new Card(); copy the clip
  c.Stop (); stop on the first frame
  
  var r: uint = Math.floor (Math.random () * cardlist.length); get a random face
  c.cardface = cardlist [r]; assign to the map
  CARDLIST.splice (r, 1); Remove the face of list
  c.addEventListener (MouseEvent.CLICK, clickCard); have it listen to the clicks
  addChild (c); Show the map
  
  create all the maps, their position and assign a randomcard to each
  
  var b:Card2 = new Card2(); copy the clip
  b.Stop (); stop on the first frame
  
  var s:uint = Math.floor (Math.random () * cardlist1.length); get a random face
  b.cardface = cardlist1 [s]; assign to the map
  cardlist1.splice (s, 1); Remove the face of list
  b.addEventListener (MouseEvent.CLICK, clickCard); have it listen to the clicks
  b.x = 200
  b.y = 200
  addChild (b); Show the map
  
  This function is called when the mouse button is pressed.
  function startDragging(event:MouseEvent):void
  {
  event.currentTarget.startDrag ();
  }

  This function is called when the mouse button is released.
  function stopDragging(event:MouseEvent):void
  {
  event.currentTarget.stopDrag ();
  }

  c.addEventListener (MouseEvent.MOUSE_DOWN, startDragging);
  c.addEventListener (MouseEvent.MOUSE_UP, stopDragging);
  b.addEventListener (MouseEvent.MOUSE_DOWN, startDragging);
  b.addEventListener (MouseEvent.MOUSE_UP, stopDragging);
  
  }
  }
  }
  
  clicking on a card reader
  public void clickCard(event:MouseEvent) {}
  var thisCard:Card = (event.target as card); What card?
  firstCard = thisCard; I have note
  firstCard.gotoAndStop(thisCard.cardface+2); Return it
  
  }
  
  public void clickCard1(event:MouseEvent) {}
  var thatCard:Card2 = (event.target as Card2); What card?
  thirdCard = thatCard; I have note
  thirdCard.gotoAndStop(thatCard.cardface+2); Return it
  
  }
  }
  }

  Try this one:

  package {
       import flash.display.*;
       import flash.events.*;
  
       public class Wicky extends MovieClip {
            // game constants
            private static const DECK_LEFT:String = "deckLeft";
            private static const DECK_RIGHT:String = "deckRight";
            private static const boardWidth:uint = 7;
            private static const boardHeight:uint = 7;
            private static const boardOffsetX:Number = 120;
            private static const boardOffsetY:Number = 45;
            private var firstCard:Card;
            private var secondCard:Card;
            private var thirdCard:Card2;
            private var fourthCard:Card2;
            private var cardDeckLeft:Sprite;
            private var cardDeckRight:Sprite;
  
            public function Wicky() {
                 if (stage) init();
                 else addEventListener(Event.ADDED_TO_STAGE, init);
            }
  
            private function init(e:Event = null):void
            {
                 removeEventListener(Event.ADDED_TO_STAGE, init);
                 cardDeckLeft = makeDeck(DECK_LEFT);
                 cardDeckRight = makeDeck(DECK_RIGHT);
  
                 addChild(cardDeckLeft);
                 addChild(cardDeckRight);
  
                 cardDeckRight.x = cardDeckRight.y = 200;
  
            }
  
            private function makeDeck(deckName:String):Sprite {
                 var container:Sprite = new Sprite();
                 var cardCollection:Array = [];
                 var j:int = 0;
                 var i:int = 0;
                 for (i = 0; i < boardWidth * boardHeight; i++) {
                      cardCollection.push(i);
                 }
                 var c:MovieClip;
                 var r:int = 0;
                 for (i = 0; i < boardWidth; i++) { // horizontal
                      for (j = 0; j < boardHeight; j++) { // vertical
                           c = deckName == DECK_LEFT ? new Card() : new Card2(); // copy the movie clip
                           c.stop(); // stop on first frame
                           r = Math.floor(Math.random() * cardCollection.length); // get a random face
                           c.cardface = cardCollection[r]; // assign face to card
                           c.deckName = deckName;
                           cardCollection.splice(r, 1); // remove face from list
                           c.addEventListener(MouseEvent.CLICK, clickCard); // have it listen for clicks
                           c.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
                           container.addChild(c); // show the card
                      }
                 }
  
                 return container;
            }
  
            // player clicked on a card
            private function clickCard(e:MouseEvent) {
                 var target:MovieClip = e.currentTarget as MovieClip;
                 // do different things based on what deck card belongs to
                 if (target is Card) firstCard = target as Card;
                 else thirdCard = target as Card2;
                 target.gotoAndStop(target.cardface + 2); // turn it over
            }
  
            // This function is called when the mouse button is pressed.
            private function startDragging(e:MouseEvent):void
            {
                 e.currentTarget.startDrag();
                 stage.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
            }
            // This function is called when the mouse button is released.
            private function stopDragging(e:MouseEvent):void
            {
                 stopDrag();
                 stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragging);
            }
       }
  }
  

• New monitor displays an Error Message "Signal out of range" when computer starts

  Installed new ASUS VS24H-P control on my computer and I get this image of "out of range" bouncing around the corners of the screen.

  This means that the computer sends a signal that the monitor is not capable of displaying.  It could be:

  • A screen resolution (width x height pixel size) is selected, the monitor cannot display
  • The refresh rate (Hz) is the one who can not display the monitor
  • These two

  If you have another monitor, you can plug it to visit your office. Right-click and choose the resolution of the screen, then turn it down to a 'safe' resolution like 1024 x 768 (most monitors can display this).  Then plug your new monitor back and turn the resolution back to a better suited for this monitor.

• Error message "frequency out of range".

  I recently bought a game, but it won't work. My PC far exceed the minimum specs to run the game, but when I run the game, my screen goes black and then a box of type screen saver appears who says "frequency out of range".

  Hello Mhl03,

  Another useful glimpse.  Not very recent games are supported wide screen resolutions.  I had to learn the hard way myself.  A good number of EA games doesn't support widescreen.  You can see the view of support of the game to see if it supports widescreen or if a fix has been released that will.

  Hope this helps you Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• error message "this file does not have a program associated with it to perform this action." at the opening of the local drive E:

  Hey,.

  I have a problem and I can't understand it. This error message comes out when I opened only local disk E:

  I have 2 HDD on my computer... 130 and 250 GB of both of them I do 2 partion so there C: D: E: and F:

  C: is my windows data and 3 others my data. When I open my computer and then click on local disk E: error message comes out.

  the error message is "this file does not have a program associated with it for performing this action.". but local disk E: can open it using Explorer tree (left side of the windows Explorer) or windows Explorer.

  THX

  Hi, Flix_is_here,

  Download this file and unzip it and then double click on it and let it run, it will restore most all default files for XP associations

  http://social.technet.Microsoft.com/forums/en/itproxpsp/thread/b48c2165-85f6-48bd-ac0f-be51dbf87f3d

• trying to install ati drivers for gfx card, get an error message, the installation cannot complete installation, install a vga controller

  Packard Bell, machine oem

  Model name: mc Maylee 1538.

  Model: utow-Sun

  Intel 3.06 GHz Prescott CPU

  BIOS Award of the medallion, v6. 00PG

  Motherboard: GiGabyte GA-8195PMD

  Intel 915P Bios for 81915PMD 10F NF

  hard drive was wiped out no. OS even if the PC is licensed, installed new operating system Windows XP Professional SP3, SP2 Office 2700

  BIOS is damaged impossible to read the menu, have fleeting glimpses of it being corrected but returns to the encryption.

  There was no noise, but this has been fixed with research assistant new material.

  looking for drivers for the card Gfx came with ATI Radeon Rage 128/128 pro, settle, but error message reads,.

  implementation was able to complete a standard vga controller/adapter

  the card is a gigabyte GV-NX62TC256DS, this number was under a gigabyte sticker which had the number GV-NX62LT256T

  get driver from gigabyte, but same problem nvidia

  some sites have returned the suggestion that it is a Nvidia Geforce 6200 THE but the nvidia for that driver will not be installed at all.

  message reads not nvidia GPU on this PC,

  I believe that the ATI driver will work, but the question that I can't solve is the VGA or Bios problem, I couldn't find any reference to VGA in the Bios when I ha d he briefly operation, it also does not detect the Gfx card as in the summary, it states that the size of screen resolution

  some of the numbers part of gigabyte I can not find and had to look for similar products there is a conflict with it being a PC OEM
  and windows both in Device Manager, the other devices with a yellow? and video controller (vga compatible) with a yellow? and yellow! on top

  Try this link: http://support.microsoft.com/kb/268852

• Monitor blacks out, error message "does not signal.

  This problem just started today. My screen keeps blacking out. I checked the cables and they were good. I did a Defrag. I changed my settings to standby power screen forever. When the screen turns off, the error message is "" does not receive do not signal. "" Is this a hardware or driver problem? Thank you.

  Hello

   
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the computer?
   
  I suggest you try these methods and check.
  Method 1:
  Start your computer in last good known Configuration mode and check.
  Advanced startup options.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
   
  Method 2:
  If you find the same problem using last good known Configuration, start the computer in safe mode and check.
  Step 1:
  Start your computer in safe mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the computer works fine in safe mode, uninstall the display driver, restart the computer in normal mode and check.
  Step 2:
  Uninstall the driver from Device Manager graphics card.
  1 right click on the computer icon
  2. Select manage from the menu.
  3. Select Device Manager in system tools that are listed in the resulting display.
  4. right click on the device.
  5. click on the driver tab.
  6. click on uninstall.
  7 restart the computer
  You can download and install the latest driver for graphics card on the computer manufacturer site.
  Graphics driver will reinstall after a reboot in normal mode, if the computer is connected to the Internet

• 'out of paper' error message and there is paper in the printer

  I have a HP 1610 printer/Scanner with an "out of paper" error message  I installed a new cartridge, a few days ago, and the printer ask me to align the cartridge.  When I press 'OK' I get the error message "out or paper.

  I loaded and re-load of paper, checked the back door for a paper jam and still get the same error message.

  I removed and replaced the cartridge but nothing seems to work.

  I'd appreciate any help!

  Thank you.

  Hello bstew4447,

  Please follow the link below to troubleshoot the out of paper issue.

  No more paper

  Kind regards
  Jabzi
  
  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP

• Aspire drivers VGA Intel V7 - 482PG Error Message

  I raised suspicion that the intel VGA drivers installed cause me a BSOD (which happens when I alt - tab of a video game using the NVIDIA VGA drivers for my deskptop).

  I'm trying to update the drivers for Intel VGA found here http://us.acer.com/ac/en/US/content/drivers, but Im getting the following error message:

  "The driver being installed is not validated for this computer."

  When you try to download the drivers directly on the site to intel, I still get the same error message.

  What I'm doing wrong :/?

  I solved my problem of manually updating the drivers using "have disk".

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• Problem with Nightowldvr. Get the error message 'Connect server out of time'.

  Problem with Nightowldvr cannot connect to the mail server

  I install Nightowldvr and he'll send automated E-mail messages, but it stops the error message "server connection out of time", using the SMTP format

  Bill

  Contact the Nightowldvr support.