VI Analyzer - edit saved config with LabVIEW 8.6.1 problem

Similar Questions

• How to connect Network Analyzer Agilent 5062 A with LabVIEW 7.1 using the LAN interface?

  Hello

  I have change a program to remote control Agilent 5062 A by NOR-GPIB.

  I would change the LAN interface. but I don't know how to change the name of resource VISA.

  another, I would like to put this S/W in HD 5062 A also the LAN issue must be resolved.

  Who has edit reonmote experience-5062A controlled interface LAN LabVIEW (7.1), share me, thank you.

  Thank you.

• Editing software created with labview

  Hello

  I have a software that was created using labview. It is essentially a software to control a laser machine used for the deposit of material. I also I have the source code of the software. I want to make some modifications to the program. When I do some changes in the source code. I see that there is no change in the software that is an exe file. so, how can I solve this problem? I guess that once I have the changes to the source code, I need to create a new executable from the VI. So I want to know how can I do a new screw exe file has changed.

  I want to know what is the difference between the following

  .VI file

  file .llb

  file .lvllb

  Thanks in advance

  Vikas

  Hello

  I could solve my problem using the executable command generate in the Tools menu.

  Thank you

• How to combine real-time video with LabVIEW indicators so that the video can be displayed and saved with the overlay data

  Let's assume for the moment that I can find a device for which LabVIEW has the appropriate drivers.  Is it possible to combine the camera feed with digital indicator fields so that there is a video out showing the data superimposed on the live image?

  I'm talking about something like a screen of the camera where you see the camera settings are displayed on the image in the viewfinder.  Note I have one isn't about analysis of video data or somehow reading parameters of the camera to the camera.  Data would be temperatures, pressures, speeds, etc., acquired by different instruments at the same time the video is captured and processed somehow by LabVIEW.

  No problem Wildcatherder, don't let me give you an overview of the process.

  When you get a video acquisition method entry, it will be an image format. Essentially, it's a bunch of images that are updated at the speed of video capture, just like the material. There are screws express (wizard - like elements) that simplify the obtaining of images from your video source. With the drivers and measurement and Automation Explorer installed, you should be able to get at least the image.

  If you have IMAQ toolkit, I mentioned, you could just wire the reference image (a purple wire wavy) and a text input (say, a temperature that is converted to a string) in the text overlay VI and it would produce the desired effect. Without this, you will need to convert the Image into image (these are two different data types in LabVIEW) and use the image instead, editing tools (essentially replacing pixels in 2D image data). You would then update an indicator of the photo with your photo altered, if all goes well to the pace of the acquisition hardware. As I said this is less elegant and can take a certain amount of time processor. If you view these images at all and are just their routing, it should be slightly faster.

  I don't know about video production equipment, I mainly used entry Firewire or USB, the computer screen or the file data. However, if the driver exists, it should be possible, but a quick review of the functions doesn't seem to come with output functions. Cannot advise on hardware, but you can start with:http://sine.ni.com/np/app/main/p/bot/no/ap/vision/lang/en/pg/2/sn/n17:vision, n21:11600 /?

  Kind regards

  Mello

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• Read file test.txt (binary or what?) with LabVIEW 8.6

  Dear friends!

  Please, how to read the attached file (test.txt) with LabVIEW 8.6.  In the same VI, can I convert it in a txt file real with the results presented in the rows and columns? Please, any idea? I need help!

  The rebooting of the trace file is binary.

  Unfortunately, without a description of the real file by developers RELAP format, I don't think you are going to get very far on the decoding of the file.

  You must get directly in contact with the authors RELAP.

  Here's the blurb to the RELAP Manual:

  3.1.4.2 the reboot-Plot file.

  The restart-trace file contains almost all the parameters of calculation

  (Sub fractions, pressures, temperatures, flow rates, etc.) for transient computing together.

  A common misconception is that a parameter must be specified using a minor in change request

  in order to be available in the reboot-trace file when the calculation is complete. Affects a minor change request

  only the printed output. The restart-trace file is accessible repeatedly that the new data should arise. However,.

  during a calculation, the data are written to the reboot-trace only for minor editing file (and the plot point)

  frequency. Once a calculation has been performed, it is not possible to recover data between data

  written to the file to restart-track of the points. Therefore, it is important to choose a minor edit (and plot the point)

  frequency that provides the plot to an interval appropriate to the problem is resolved. In practice,.

  the minor change (and plot point) frequency must be changed during the calculation as the product of the problem

  from one phase to the other. Common points must be selected in the phases of problem where rapid

  RELAP5-3D/2.4

  INEEL-EXT-98-00834-V5 3-18

  setting changes are expected. For the economy, less common points must be selected in the phases

  where the conditions of rest are expected.

  Calculations are usually made using several reboots. (See Volume II for the restart entry

  requirements.) For example, a new problem runs from 0 to 10 seconds. This first part is analyzed and

  Run again from time zero that errors will be corrected. When a managed to 10 seconds has been calculated, a

  restart run is made (for example, 10 to 30 seconds), and so on. RELAP5-3D

  © offers you the possibility of

  change of almost any feature of the model at any point of restart. When changes to the model are incorporated on

  reboot, reboot-plot file reflects those changes only after the decimal point in the calculation, where they have been

  implementation. In the example above, if an injection system is added to the model to 10 seconds, then data

  for added components exists only for the time after 10 seconds. Changes, deletions and additions of model

  are constantly being implemented. If a model change is done in 10 seconds, the revised model remains in

  effect unless other changes are made to subsequent restart points.

  When a calculation is completed, the restart-trace file becomes a valuable document of the

  calculation. If lost, replacement would require reperforming the calculation, usually to the considerable

  loads. At a later date, the file can be accessed and previously compressed data can be obtained as

  necessary to extend the analysis. Therefore, it is recommended that files of restart-track of the important calculations

  be protected safely and permanently.

• The Keithley 2612 is compatible with Labview 7.1?

  Hello

  I have a shiny new Keithley 2612 A two-channel sourcemeter and want to begin using this system of our laboratory.  We are currently using LabView 7.1.

  I found a driver for the 2612 has, but he says that it is only compatible with LabView 8 or later:

  http://www.Keithley.com/base_download?dassetid=51950

  Does anyone know of another driver, or another method that I could get this thing working in LabView 7.1?

  Thank you very much

  John

  Download and publish it on the thread Downconvert .

  Edit - this is a style of project pilot who introduced with LabVIEW 8. It might take a little longer.

• Is it possible to use a Linksys by Cisco Wireless - G Internet home monitoring camera with Labview

  I was wondering if it is possible to use a "Linksys by Cisco Wireless - G Internet home monitoring Camera" with Labview

  http://www.dabs.com/ProductView.aspx?quicklinx=53PX&SearchType=1&searchTerms=network+cameras&PageMod...

  I wan't to be able to get the raw data from the camera and analyze it.

  I found a simple soloution to this problem,

  Is possible to use a web browsers invoke node basically give a screenshot of the web page (get image)

  It can then be loaded into a display of the image and will show exactly what the web browser is showing and can also be analised by unflattening the pixmap.

  Maybe it's not the most effective method, but he turns my rig fast enough and does the job

  It may also be a setting value of the display of the photo to "smooth updates" that gets rid flashes white as the changes to the image, if anyone else has this problem.

• IMAQ PCI-1424 compatibility with Labview 8.6

  Hi, the computer that I used for image analysis had a broken motherboard issue, and I replaced it with a new one. I removed both the drives and the jury from the old computer to the new and then installed IMAQ Labview 8.6, but Labview 8.6 is not compatible with the software programmed with labview 5.0, so I uninstalled Labview 8.6 and re-installed Labview 6.0 image processing. I still have some problems to run the Analyzer software and image processing. After you have uninstalled the software or labview, the computer does not start correctly, poping up error as information "check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer."

  Some basic information on this computer and the image acquisition system (introduced in 2000) are as follows:

  • Windows 2000 operating system;
  • LabVIEW 5.0 basic package;
  • IMAQ vision for Labview advanced;
  • IMAQ PCI-1408, Cables IMAQ-BNC-1 and or-IMAQ for Windows NT / 95;
  • IMAQ-A2504-1 (1 m).
  • Sony XC - 55 1/3 "Interline transfer progressive scan CCD, 659 (H) X 494 (V), C-mount with JB - 77, SERVICES-12 p-02 and DKT503M;
  • Computar H1212FI 1/2 "mount C 12 mm w/focus and iris (10 inches FOV at 24 work dist.);
  • Extension tube Kit Computar VM100;
  • GRAFTEK high frequency fluorescent light 11 ";

  -What hardware IMAQ I use compatible with Labview 6.0 or 8.6? Should I install also drivers for the hardware of the IMAQ when I remove the card IMAQ? All the solutions for my problems? Thank you very much in advance!

  Hi simpra,.

  Here are two links to articles that list compatibility between Windows & LabVIEW and LabVIEW and IMAQ.   Why do you say that the image processign software was not compatible with the LV 8.6?  A message appear?  Or it simply did not work?  Also, are you talking about Module Vision Development, by chance?

  I'm afraid that I can't help hard drive corruption, if that's the case here.  Have you been able to go beyond that?

  My suggestion is to upgrade to the latest version possible.

  I hope this helps!

  Kristen H.

• Edit a copy with lightroom adjustment has suddenly stopped working

  I used photoshop CS6 and lightroom 3.4 for quite awhile. However I can not suddenly move images from lightroom to photoshop (Ctrl + E) with the "edit a copy with lightroom adjustment".

  When I click on this option, it opens the Photoshop. But does not open the image. However, the other two options "edit a copy" and "Original Edition" works very well.

  Also when I add as another external editor photoshop, it works very well. But as you all are aware of this create another copy of the image.

  What I've done

  I checked the path of applications for photoshop and it was OK.

  I uninstalled lightroom and reinstalled.

  JosephPatrick wrote:

  I just started having the same problem. When I edit a photo in Ps from Lr. The dialog box is not started, and if I edited in LR it takes adjustments and opens to the PS. I have Lr cc v2015.5.1 camera raw 9.5.1. I have reset all warning dialog boxes. Weird. I suspect that there is a bug. Any ideas?

  Please start your own thread. Since you have LR CC 2015.5.1 you also PS CC 2015.1.2.

  What you see is normal. When you select Edit in Photoshop LR and PS use the same version of ACR so no dialog is necessary. Your RAW image opens in PS with all the LR settings included as a type of RAW file waiting to be saved as all that you have selected the type of file in External Editor preferences of LR, PSD or TIF section. The only time you get this dialog window is if ACR versions do not match. LR uses a version more recent ACR uses the PS version you have installed.

• Editing a cell with text in

  I drives me crazy.  I want to edit a cell with text in.  If I click on the cell, the entire cell is selected and wiggles autour.  I can't click on new to add an insertion point.  It seems to me to have 2 options: 1) of a new type that will erase the entire cell and add new content or 2) move the cell to another location (it is jiggly)

  What I am doing wrong.  How to change the cell.

  Double-click the cell to enter edit mode

• VIMBA with Labview

  Hello

  is there anyone who have successfully used VIMBA SDK with Labview?

  You need to download version 1.3

  Use the LabVIEW import DLL

  Point to the VimbaC dll, not C++

  Put _WIN32 in the compiler directives.  This you will get part of the way.

• Compatible with labview thermostat

  Goodmorning,

  I'm looking for a thermostat (a device that can measure temperature and humidity) compatible with labview and if possible with a USB connector.

  You never heard / use such a device? I did some research but I can't find it.

  Thank you in advance.

  Thank you! I found another that looks better, but thank you! (Your temperature is smaller)

• NI 9148 with LabView module detection

  Hello

  I got the task of creating a deployable (compiled) software to a DAQ system with NI 9148 Ethernet RIO basket background and various modules. The user must have the ability to change the module type and the location of the different tests, so the application must detect (or the user specify) what modules are at what positions.

  I watched the blockset CRY, however this chassis is not supported and the lowest level blocks are protected. Is it possible to read the serial number of the modules connected to the 9148 OR position, type, and if all goes well?

  Thanks for any help!

  Hello Soonxaf,

  What are you helps as a controller-is this RT or Windows? Are you planning on the use of analysis of RIO or LabVIEW FPGA engine?

  If you plan use the analytical engine, so this should help you get started:

  Tutorial: Discovery, Configuration and programming access of the CompactRIO Scan Mode to IO with LabVIEW

  http://www.NI.com/white-paper/9351/en

  Kind regards

• Executable VI with Labview 2011

  Hello everyone, I'm doing an executable on LabVIEW 2011 SP1. I've never done before, but in my project, I go to tools-> Build Application (EXE) from VI... I check to make sure that all the Sub VI are in the Dependencies tab and I put the way I want the EXE to go, then I build it. Building compiles and I have good Run-Time Engine installed, but when I go to open the EXE file, I get a lot of mistakes because void VI could not be loaded. I checked these Sub VI that were not loaded and they are locked and password protected. Probably comes with LabVIEW, so they don't want to play us with anything. How can I get these included in the EXE and not return an error?

  Thank you.

  I deleted the Run-Time Engine and downloaded again, and I think it worked. Strange, but I accept it