VI Analyzer
I use the LabVIEW 2010 development suite, I am trying to use VI Analyzer, but when I get to the screen for the test without options configurations are showing under the section on testing. All the boxes are missing. I tried the button 'Reset all the Test Configurations', but it did not help.
Jim
Did you run the VI Analyzer Toolkit 2010 Installer? Without the Toolbox installed, the tests will not be displayed in the user interface. You can check by looking in the following folder:
Program files (x 86) \National Instruments\LabVIEW 2010\project\_VI Analyzer\_tests
If this _tests folder is empty (or absent), then the Toolbox is not installed. Also, notice that the Toolbox will install 32-bit LabVIEW.
Tags: NI Software
Similar Questions
-
10 iOS is holding still to analyze my photo library
Hello. I just downloaded iOS 10. Now I'm on the Photos and I try to get on the memories. I get a message saying "Scanning"... "" * load bar * "it may take a while to analyze you are your library for the first time. "It aims to take more than 10 minutes of this? The load bar showed at the beginning, but now it no longer appears.
It depends a lot on how many pictures you have in your library. Some of the scans can take hours or days.
-
Hello I am trying to download an episode of my Podcast podcast connect and get this error?
Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.
my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS
It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.
Your show is already in iTunes.
https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1
And everything seems fine with it and your diet. You ONLY SUBMIT YOUR FEED ONCE.
That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things. Once again, your show is very well and is in iTunes and your flow is good with it.
Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.
Rob W
https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2
-
Hi all
I am looking to invest in a DAW for audio work (obviously), but I'm torn between Logic Pro X and Adobe Audition CC. I'm not a fan of the Adobe subscription model so I would invest in LPX, but the problem is that I can't find the function that I need.
Adobe Audition CC has a Spectrum Analyzer and allows me to eliminate noise from my soundscapes, but I can't find the feature in LPX. Y at - it to download a plugin or a way to do this? I don't do music production, I am more than a sound designer for the theater and cinema and use recorded sounds so clean and restore is more what I'm looking for. I am rather new to this and would like any input you can provide.
Thank you!
I've been a user of the logic for many years, but I use Izotope RX as a plug-in (s) in the logic for a serious cleanup work.
-
How to restore or at least analyze emails from account deleted when the server no longer exists
I have emails from an email address @domain.com that are saved in my Local folder. I would like to follow the instructions to restore this account here: _ http://kb.mozillazine.org/Thunderbird: _FAQs_:_Recover_Deleted_Account
The problem is that the server that hosted email no longer exists, so I can't add it back again. Is it possible to import in Thunderbird yet, so I can always analyze them? Or someone has a suggestion on how I can access these emails in a simple way? I need to be able to search through them, as I already do in Thunderbird.
In general, in IMAP, all your messages are stored on the server and Thunderbird downloads the temporary copies in order to accelerate the search and navigation. Since there are parameters for the amount of content in the message to download, or only the headers, there is no guarantee that you will have messages in their entirety.
For future use, if you have an IMAP account that is connected and the desire to preserve the independent messages from the server, you must copy them to a place outside of the IMAP account folders connected, such as local folders.
-
now everytime I open LPX he again analyze the audio devices
Hi all
LPX last...
now - everytime I open LPX he again analyzing audio devices - again and again...
How can I do to don't forget and stop doing every time?
He never come back and say that something is not verifiable?
To do this, go to Logic Pro X menu, preferences, to the Plugin Manager.
Click Show all the top left selection.
Click on the button "Reset & Rescan Selection" at the bottom.
Scroll down the list when it's done and see if in the 'Compatibility' column if anything incompatible lists or failed.
If so, click on the "disable failed Audio Units" button at the bottom left.
-
I have installed server for fun and learning.
This year, he was attacked several times.
The problem is that I don't spend much time to check the logs, take a long time before I realized it.
Is there a Log Analyzer or something that alert when there is a problem as an IP attempts a password for several hours?
As far as I KNOW, there is no built-in log reduction and analysis within the OS X Server tools. There are additional log analysis tools.
If OS X Server it has some features of firewall in this area through pfctl(8).
Botnets easy to circumvent the usual types of reactive treatment, however, a single test every one of a zillion hosts works as well as a bunch of a host tests and is much harder to block. That usually means setting up an external firewall or VPN services and reducing the number of ports exposed.
Switch back to certificates where you can and learn more about what can do for the passwords.
-
I recently pyurchased a new Dell running Windows Pro 10 and connected to my wireless HP6500A over my home network printer. I get a message that "computer Scan is enabled is no longer." The network connection to the computer has been lost.
He was noticed by the so-called "SCAN TO PC ACTIVATiON APP".
I ran analysis diagnosis several times, and while I have not tried to save a scan, I was able to scan and capture the scan on my DELL computer screen. It seems to me that the message indicating that the network connection has been lost is incorrect. So, my question is, how do I get rid of the pop-up message which seems to display every 2-3 minutes and is very irritating?
Thanks for any help.
Hello
Thank you for using the HP Forums.How to scan to computer
Once you have installed the software:
1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
3. make sure that the option 'enable' Scan to computer"is DISABLED.Look at this resource and to ensure that it is "unchecked" (instead of ticked)
Scan to computer
Hope that helps! -
Is there a way you can set up a printer hp 7520 to analyze the auto size?
When I scan from the printer or the computer, I either make real and then later crop size or size to scan. When I had my photosmart hp over the printer. I had to do this it would automatically detect that and scan at that size. Is there a way I can set up my printer to automatically detect the size of everything in the printer? I thought a new printer would be better, but it is causing more and more problems I.
Hello
Unfortunately not for this printer, you must select the scanning area we want to analyze
Kind regards.
-
Satellite M100 - I can't analyze the CPU temperature
I am a Toshiba Satellite M100 series owner (Core Duo T2300, X 1400, etc.). The problem is that I can't analyze the CPU temperature variations in such popular application such as Everest or Notebook Hardware Control. Also any other software provided by Toshiba and installed already on my HARD drive does not include some CPU diagnostics, including temperature changes!
The only software that seems to work is the HWiNFO32 so there is a thermal probe inside which specifies that Centrino Duo processor temperature, but this software is not very user-friendly :(
There is a request for Toshiba do something with this... I've updated the BIOS in my template for a version 1.70, but this does not change I could easily noticed (or is he?) :(
Hello
In most cases applications can give you info on the hardware and the different settings but the temperature of the CPU in most cases is not visible. Toshiba has no tool or utility that can read or modify.
BIOS update has absolutely no influence on it. Satellite M100 is one of the latest devices and I really don t understand why it is so important to you. Important in my opinion is the stability of the system, the operation of the equipment and no problem with the software you are using. Am I wrong?
-
Google Cloud Print setup - impossible to analyze the capabilities of the printer
I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.
Any help would be greatly appreciated. I tried the reset email with no luck...
EDIT - 01/04/11:
I chatted with HP support, and although the representative was extremely courteous, they could not help me. The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.
EDIT - 04/04/11:
Received a response from the original HP rep that I chatted with online. In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP... We shall see.
EDIT - 05/25/11:
After 2 months of waiting, HP has corrected the problem. Don't forget to upgrade to the latest firmware and check all the settings before continuing.
The fix came from the side server - this defiinitely had nothing to do with the firmware. I've updated on Monday for the latest on the HP website and it was still not working. The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.
Nevertheless, I am happy without worrying how the fix is here!
It took only 2 months to fix, but I'm glad it is.
-
Music Analyzer does not work on NF800
Hello all I'm new and need help.
I have a walkman NF800 with android and music analyzer (Senseme) feature aways stop working, its has some sort of error. The player is connected when I perform the analysis, and I check the feature awake to stay for the screen, so I don't know what is happening here. Any help please?.
PD: Sorry for my bad English, I'm a self-made man!
I'm sorry that reset did not help to solve the problem. Contact Sony Support in your country to check if updates available and to help others.
-
Trying to submit a new podcast, I get the error "unable to analyze your diet." What does that mean?
Trying to submit a new podcast, I get the error "unable to analyze your diet." What does that mean?
There is nothing else with the error (I see references to problems with the exact lines of the RSS, but I don't get everything). RSS feed works fine in a different podcast player.
Here's the .xml file:
http://www.iTunes.com/DTDs/Podcast-1.0.DTD"version ="2.0"> Podcast of Mo http://psychicreform.com/mosports/
en - us ℗ & © 2016 MB Podcast This podcast addresses all kinds of sports, but especially of college sports with a focus on the United Kingdom and uofl's of baseball and basketball, Arizona Cardinals football and baseball for the St. Louis Cardinals. Did I mention Mr. Overbey do not use notes or have a computer to access the internet? MO Episode 6 http://psychicreform.com/mosports/160208-006-MoSports.MP3' length = "4540370" type = "audio/mpeg" / > http://psychicreform.com/mosports/160208-006-MoSports.MP3 Saturday, January 9, 2016 17:00:01 CEST MO Episode 5 http://psychicreform.com/mosports/160205-005-MoSports.MP3' length = "32525946" type = "audio/mpeg" / > http://psychicreform.com/mosports/160205-005-MoSports.MP3 Saturday, February 6, 2016 17:00:01 CEST MO Episode 4 http://psychicreform.com/mosports/160112-004-MoSports.MP3' length = "57652357" type = "audio/mpeg" / > http://psychicreform.com/mosports/160112-004-MoSports.MP3 Wednesday, January 13, 2016 17:00:01 CEST MO Episode 3 http://psychicreform.com/mosports/160104-003-MoSports.MP3' length = "46250012" type = "audio/mpeg" / > http://psychicreform.com/mosports/160104-003-MoSports.MP3 Sunday, January 10, 2016 17:00:01 CEST MO Episode 2 http://psychicreform.com/mosports/151230-002-MOSports.MP3' length = "62485146" type = "audio/mpeg" / > http://psychicreform.com/mosports/151230-002-MOSports.MP3 Sunday, January 10, 2016 17:00:01 CEST MO Episode 1 http://psychicreform.com/mosports/151225-001-MOSports.MP3' length = "35638537" type = "audio/mpeg" / > http://psychicreform.com/mosports/151225-001-MOSports.MP3 Wednesday, December 30, 2015 17:00:01 CEST Please always post the URL of your feed, not its content. I'm assuming that your workflow is the one mentioned in the tag "atom: link".
http://psychicreform.com/mosports/mosports.XML
Feed validators are complaining that this line contains a prefix of "independent". I think it's probably because in the second line, "rss.xlmns" it does not mention "atom", only "itunes" - the URL in this line indicates the feed reader RSS how to interpret the tags for this application. Without link for 'atom', the tag is meaningless to readers, and it is marked as an XML error, which is enough to cause the feed unreadable. There is no need to have this line (Atom is a very old RSS reader which I doubt anyone uses now) and you'd better remove that line altogether, either that or somehow insert the URL of the atom, which seems to be "xmlns:atom ="http://www.w3.org/2005/Atom"" so that the second line would read as follows: "
http://www.iTunes.com/DTDs/Podcast-1.0.DTD"xmlns:atom ="http://www.w3.org/2005/Atom"version ="2.0">" You will need to take one or the other or the feed will continue to be unreadable.
-
USB key will be always analyzed
English is not my native, so I'm sorry if I make mistakes. My Toshiba laptop (windows 7) open the USB drive too long. Whenever I plug a USB key, he asks me to analyze the stick and check if there are errors, or proceed without analyzing. The problem is that it it scans all the time regardless of my choice. Sometimes it's not, but it does in most cases. Even if I remove the stick safely, it will scan it when I plug it again.
How can I get rid of this?
Hi Gasolgasol,
What laptop you have exactly?
This happens with all USB keys or a certain USB?In my opinion there must be a problem of OS (Windows 7) then maybe you should ask in a forum for Microsoft. There are more experts regarding Windows 7 delivers ;)
-
Connect with the gas on TCP/IP Analyzer
Overview: I am trying to contact several Thermoscientific via TCP/IP gas analyzers. I have successfully set up the MAX connections and think I'm pretty close to being able to connect these data in real time.
Questions: I'm not very familiar with TCP/IP or Modbus and clearly am not quite understand the documentation. I can succesfully open the TCP connection and do not benefit from an error. My problem lies in the plug correctly good values to the vi MB Ethernet Master query reading record keeping. If someone could help, it would be fantastic.
What I have so far:
I don't get any errors, but I don't read all the operations to be registered. I use a Trace level SO2 43i model ThermoScientific Analyzer. According to the manual, I am interested in register numbers are 40001 and 40002.
I have attached the vi. Any help would be greatly appreciated.
I have a solution! It turns out that the ID of the unit must be the same as the numeric part of the model number for a specific parser. She does not mention this anywhere in the documentation (at least, not that I could find). I posted my solution (vi) in case someone else wants to use them or to see what I did to solve problems. Thanks for the help!
-
OR PCI-5640R serving of real-time Spectrum Analyzer
Hello
The code for the demo of the real-time Spectrum Analyzer real NI SMU-5641R is shown HERE for LV 2009. I want to use the same code for NI PCI-5640R NI SMU-5641R instead. Since I'm on a 5640R, I changed the device in the project.
Can someone guide me what else I need to do in this demo code so that I can use the same code for the NI PCI-5640R
instead of the SMU-5641R NI?Thank you and best regards,
Rashid
Hello r,.
Since you have not mentioned I guess that you do not have NI 5600. Therefore, to make this example work, you will need NEITHER 5600 buck frequency converter and driver of DAMA. NEITHER 5640R serves only as a digitizer in this case. Also note that the 5600 is the resource name hardcoded in the program, so if you have OR 5600, you can either rename in 5600 Max or change the name of the resource in code for matching a max. You also need re 5600 NOR as a DAA, so so right click on 5600 OR in select Properties MAX and select external under scanner. All should be good as long as you recomplie the project to create a new file of ILO.
Thank you
NOR-khil
Maybe you are looking for
-
Hello, my printer HP 6540 installed correctly will not print
my pc HP pro series 3500
-
Tecra 8000: Question about upgrade hard drive
Hello I recently bought laptop Tecra 8000 PII 400 MHZ. The laptop has 10 GB of hard drive.I want to increase my hard drive, which is a maximum size of the HD can I increaes in my laptop? Thank you
-
I think to upgrade my laptop Toshiba Satellite A210 - 1 4 for Windows 7. There are 2 editions available on Amazon Home Premium - upgrade and retail sales. My question is why is the cheapest upgrade disc. I would be able to use to run a clean install
-
How to get to several information element
Hello. I am writing because I have a problem following another problem is partially solved. During my first problem, I wanted to know how to change the pictures in my list of artists on my ipod. This problem was solved in part because I am able to ch
-
In the old compiler (CVI 8) I used a few function to retrieve a panel with the State measure and publish it as BMP image to datasocket. On a remote computer, I have a link to the server datasocket and updates the image of the display panel. As existi