VI of the railways in the libraries when it is deployed

Similar Questions

• End of line constant returns only the PMQS when it is deployed on cRIO

  LV2011 SP1: I found that when I get a string to use with the TCP write VI, I get a different result by using the function of end of constant line if I run the LabView project against the project deployed on the cRIO-9101.  In both cases, the project is running on the cRIO, but using LabVIEW, constant of EOL gives a CR - LF.  When lance boot on a deployment, I get only a LF.  I worked Arturo the problem by replacing my constant EOL with CR and LF explicitly on my block to concatenate strings.

  On an earlier version of LV (9.6), I did have this problem with the same target.  The gap has occurred only since development to LV 2011 program.

  Any ideas?

  Hi Ken,

  I found a CAR (Corrective action request) #148678 that describes this problem. There is currently no version of the patch / which solves this problem yet, but the current solution is to concatenate the two manually, as you did. I apologize for any inconvenience this has caused.

  DylanC

• After you run microsoft windows update 8, I get an error message when I try to go to the libraries using the Explorer

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  Hello

  See the following instructions to Update libraries and solve this problem.

  1. in the file Explorer , select the folder parent of libraries in the left Navigation pane.

  In the right pane click on the right button of the library of Documents, music, photosand videos by default, and select the Remove option. Click Yes to confirm the deletion.

  (Note: this will not affect the folders or files in this library)

  2. in the Navigation to the left side pane, click on the libraries of parent folder and select restore default libraries option.

  This will refresh the default libraries and should solve the problem.

  If you added all files for libraries folders by default, you need to add these records.

  Let us know the results.

  Concerning

• new folder on the libraries button does nothing

  Why the "New folder" button works in my library.

  Hi James,

  1. how exactly you are trying to create a new folder?
  2. do you have a code error message when you try to create a new folder?
  3. don't you make changes to the computer before the show?

  4 Windows operating system is installed on the computer?

  5 are logged as administrator?
   
  Method 1:
  Restore default libraries and then try to create a folder in the library.
  Steps to follow:

  a. open a Windows Explorer window.

  (b) in the Navigation pane, click with the right button on the libraries and click on restore default libraries.

  c. try to access the new folder button.
   
  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  If the methods above do not solve the problem, then follow the steps mentioned by Linda Yan dated Monday, May 24, 2010 08:38, the link given below.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• No sound in the libraries 'My Music' or Zune music

  Selective audio problems

  The audio from my PC works fine when I play clips from YouTube, so I know there is no problem of its fundamental.  However, when I try to play music of the libraries 'My Music' or Zune, no sound is at all.  The music track seems to play, moves the progress bar showing how long the track played, but I can't get a sound out of him.  What gives?

  Hello

  Try the step of the link and see if it helps:

  No sound in Windows XP

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Reference: How to solve sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/PT-BR

• Some folders in the libraries view 0 files

  In Windows 7, some records in libraries approached through the Explorer shows 0 files and does not open even if they used to work properly, (most records still work) but when I approach them by going to the D: drive the files are all there. I done all the easy things, checked the permissions, etc., but the problem persists. Can you help me? Thank you.

  It is usually a corrupt library.  Try right-clicking on the libraries section, choose new > library and make a new.  Add this folder and check that it works.  If all goes well, right click on the library of old/broken and delete it.

• What is the sequence when a PDF file is generated?

  I would like to know the sequence of events when a PDF file is generated from InDesign CS4 using the Adobe PDF 7.0 printer. PostScript is involved somehow before the PDF is generated and I would like to have a better understanding of what is happening.

  Acrobat Help says:

  In an application such as Adobe InDesign, use the command print with the Adobe PDF printer to convert your file in Adobe PDF format. Your source document is converted to PostScript and sent directly to Distiller for conversion to PDF, without manually starting Distiller. Preferably current Distiller and Adobe PDF settings are used to convert the file.

  It is the a delicate, at least for me, because the explanation is confusing. My problem is the following: under InDesign > file > print > printer I have a PDF Adobe 7.0 (as well as my regular printers), and I don't know who 'Adobe PDF settings' are currently designated.

  QUESTION 1

  The expression of aid:

  Preferably current Distiller and Adobe PDF settings are used to convert the file

  is that the fact of Distiller > Preferences, and Distiller > settings Adobe PDF (the main window to distill)?

  QUESTION 2

  When I select the Adobe PDF 7.0 printer and press print, InDesign creates Postscript itself, or he asks using Acrobat or Distiller?

  QUESTION 3

  At some point before I get the PDF, a Postscript file will be launched, and it's "fairly directly to Distiller for conversion to PDF. At this stage, the Postscript file only is all the options that I asked in the print of InDesign dialog box (exit, Advanced Graphics, transparency and so on)? Or has there been some back-and-forth discussions between the Distiller (and its parameters) and InDesign (and its print settings) to solve all the conflicts?

  In short, is it correct to say that InDesign creates Postscript by itself (subject to its print settings), and then distilling takes Postscript from InDesign and converts it to PDF format (subject to its own parameters).

  Are you talking about export or print to PDF?

  Exported PDF files is not converted to postscript at all. It is exported

  directly to PDF using the libraries PDF internal.

  When you print to PDF, InDesign creates a postscript file, as it would

  What impression on any standard printer and Distiller converts that to

  PDF. Distiller simply acts as a virtual printer.

  The postscript created by InDesign file contains all the options work

  selected in InDesign - as would any postscript file everything

  printer.

  In summary, Yes.

  But you really should be export directly from InDesign and avoid

  the PostScript scene altogether...

  Substances

• What happens exactly in the background when we run repeat AD in 11i applications?

  HII All,
  
  Please can someone tell me what exactly is happening in the background when we run adrelink.
  
  Thank you in advance
  
  Rambeau
  
  Published by: RBandla on February 9, 2010 02:12

  Salvation in cloth;

  The utility of repeat links adadmin allows you to connect squeegee executable Applications programs with the Oracle Server product libraries. For more details please refer to the Note: 74661.1 - how to recreate a link to executable files

  It may be useful

  Respect of
  HELIOS

• Exceptions: ".." Error testing "inputValue" property "when it is deployed to the Organization

  Hi all
  
  I create two Jehovah's witnesses to implement the business component reuse.
  
  JWS1: Model only: EO, VO, AMCore-> deploy on DataModelCSMT.jar & DataModelCSCommon.jar
  
  JWS2: Model, import Jar files the two above, create only 01:00 extending of AMCore
  View, create jspx using AMDataControl
  
  JWS2 work perfectly on OC4J 10.1.3.3 Embedded, but when I deploy to OAS 10.1.3.3, I get this error:
  
  10/08/15 15:07:33.461 ViewArchive: Servlet error
  javax.faces.el.PropertyNotFoundException: error in testing the property "inputValue" at the bean type null
  at com.sun.faces.el.PropertyResolverImpl.isReadOnly(PropertyResolverImpl.java:274)
  at oracle.adfinternal.view.faces.model.FacesPropertyResolver.isReadOnly(FacesPropertyResolver.java:124)
  at com.sun.faces.el.impl.ArraySuffix.isReadOnly(ArraySuffix.java:236)
  at com.sun.faces.el.impl.ComplexValue.isReadOnly(ComplexValue.java:209)
  at com.sun.faces.el.ValueBindingImpl.isReadOnly(ValueBindingImpl.java:266)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:211)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.FormElementRenderer.renderAsElement(FormElementRenderer.java:155)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.InputLabelAndMessageRenderer.getLabelFor(InputLabelAndMessageRenderer.java:53)
  to oracle.adfinternal.view.faces.renderkit.core.xhtml.LabelAndMessageRenderer$ Label.getForId (LabelAndMessageRenderer.java:500)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.OutputLabelRenderer.encodeAll(OutputLabelRenderer.java:69)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.delegateRenderer(CoreRenderer.java:281)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.LabelAndMessageRenderer._renderLabelCell(LabelAndMessageRenderer.java:222)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.LabelAndMessageRenderer.encodeAll(LabelAndMessageRenderer.java:159)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.InputLabelAndMessageRenderer.encodeAll(InputLabelAndMessageRenderer.java:94)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
  at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:246)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer.encodeColumnChild(PanelFormRenderer.java:275)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer.renderColumn(PanelFormRenderer.java:251)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer._renderColumns(PanelFormRenderer.java:545)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer._encodeChildren(PanelFormRenderer.java:153)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer.encodeAll(PanelFormRenderer.java:69)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
  at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
  at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:54)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:242)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:265)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:147)
  at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
  at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
  at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
  at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:645)
  at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:568)
  at oracle.adf.view.faces.webapp.UIXComponentTag.doEndTag(UIXComponentTag.java:100)
  to AddDocumentjspx._jspService(_AddDocument_jspx.java:316)
  to com.orionserver [Oracle containers for J2EE 10 g (10.1.3.3.0)] .http. OrionHttpJspPage.service (OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:724)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:414)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ServletRequestDispatcher.invoke (ServletRequestDispatcher.java:713)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ServletRequestDispatcher.forwardInternal (ServletRequestDispatcher.java:370)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ServletRequestDispatcher.unprivileged_forward (ServletRequestDispatcher.java:287)
  in [Oracle containers for J2EE 10 g (10.1.3.3.0)] com.evermind.server.http.ServletRequestDispatcher.access$ 100 (ServletRequestDispatcher.java:51)
  in [Oracle containers for J2EE 10 g (10.1.3.3.0)] com.evermind.server.http.ServletRequestDispatcher$ 2.oc4jRun(ServletRequestDispatcher.java:193)
  at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ServletRequestDispatcher.forward (ServletRequestDispatcher.java:198)
  at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
  at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
  at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
  at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
  at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
  at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ResourceFilterChain.doFilter (ResourceFilterChain.java:65)
  at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
  at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
  at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
  at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.EvermindFilterChain.doFilter (EvermindFilterChain.java:15)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ServletRequestDispatcher.invoke (ServletRequestDispatcher.java:621)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.ServletRequestDispatcher.forwardInternal (ServletRequestDispatcher.java:370)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:871)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.HttpRequestHandler.serveOneRequest (HttpRequestHandler.java:221)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.HttpRequestHandler.run (HttpRequestHandler.java:122)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)].server.http.HttpRequestHandler.run (HttpRequestHandler.java:111)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.3.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:595)
  
  Which may eventually cause the error?
  
  Thank you for your help,
  xtanto

  Hello

  to me, it seems that it does not find the entities defined in the jar of the first workspace JWS1. You can configure the libraries on the Viewlayer project as well? Just add to the path to the library jar files

  Frank

• Bo off the power when save you in Keynote 7

  I use Keynote to constitute a group of slides synchronized to a soundtrack that plays on the group.  The time for each slide is not exactly the same thing.  In Keynote 6.6 and previous versions, I joined the soundtrack, then folder mode advanced blades as needed.  To do this I need to hear the soundtrack when recording (mike is off) the time to advance each slide.  It worked well until Keynote 7 I have discover that the soundtrack is disabled in record mode.  It's actually record, but I can not hear in record mode (only when the recorded session is read).  It's silly that I need to hear the soundtrack to know when to move to the slide.

  It doesn't seem to be a matter of Keynote7, because when I removed 7 Keynote and replaced with Keynote 6.6 everything worked as I expected.  In other words, I could hear the soundtrack in record mode.

  I have macOS Sierra and use a MacPro (end 2013) or MacBook.

  Has anyone found if it is possible to hear the soundtrack in record mode in Keynote 7 (with microphone mute or, indeed, using the microphone on the soundtrack).  If yes have you had to adjust anything in the 7 Keynote circles to hear the soundtrack in record mode?

  There are a number of things, is not the case in Keynote 7 that were available in previous versions.

  Its never a good idea to use an application in a version of point zero (e.g. 7.0) for production activities, use it to test only. Keynote version 6.6.2 works as expected in the Sierra, so that install from a backup file.

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• IOS 10.0.1 and 12.5.1 to Windows 7 iTunes, the iPhone no longer appears as a device on the computer when I plug it, even if it syncs very well

  IOS 10.0.1 and 12.5.1 to Windows 7 iTunes, the iPhone no longer appears as a device on the computer when I plug it, even if it syncs very well. That's how I used to synchronize and access my photos from my phone to my PC.

  * Is there a way to make the phone reappear?

  * Is there a different way recommended to synchronize the pictures from the phone directly to a PC? I don't want to use iCloud.

  Thank you!

  ITunes still recognizes your iPhone? If not, try to follow this link: If iTunes does not your iPad, iPhone or iPod - Apple Support

  or you can also contact apple support contact Apple for support and service - Apple charge for assistance

• How can I disable the voice when you type with iOS 10.0.1

  How can I disable the voice when you type using iOS 10.0.1?

  GO to settings - general - accessibility-speech - Feedback-turnoff typo Word...

• What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?

  What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?

  When organizing photos for Photos for Mac app, I find that the Photos makes "copies" of files within the library of Photos and must reference a file if your settings are such that you do not copy the original files in the Photos app.

  Trying to manage the disk space for the Macbook Pro.

  The delete after import is available only when you import a device - a camera, card, an iPhone, but not when you import files from a folder on the system drive.

  You can delete the local image files of your system drive yourself, once you have imported the Photos and they were copied in the photo library.

  I would never use the option "delete after Import. The files will be deleted until you can check if the files have been imported correctly. If you find out later, that some of the imported files are corupted and illegible, it will be repeated o toolate import, because the files have been deleted from the device. Or worse, if pictures should plant a reason any during the import, all the pictures will be lost, if you have enabled "delete after import.

• When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  Sorry try again - your post does not calculate

  They are all in the photo library, but I don't know why they are not in pictures

  What version of the operating system and Photos you have? Explain what exactly you're actually seeing and what has changed since it worked

  LN