VI (s) DAQmx Labview 2012

Similar Questions

• Why LabVIEW 2012 does not support USB-6009?

  Hi all

  I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5.

  What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error."

  If someone has an idea to solve the problem, please let me know.

  devkotaj

  Hi devkotaj,

  The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me.

  What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here.

  I hope this helps!

  Andy C.

  Engineering applications

  National Instruments

• With the help of myDAQ with LabVIEW 2012

  LabVIEW 2012 allows the myDAQ? When I run LabVIEW 2011 I can use the DAQ Assistant in LabVIEW and LabVIEW 2012, I do not see the DAQ Assistant Express VI. I've seen drivers does not support LabVIEW 2012 on the site, but I was wondering if anyone knew a way to use the myDAQ with the 2012 version. The myDAQ runs well on my version of 2011, but my students use the 2012 version and are struggling to make it work. I hope that they do not have to reinstall LabVIEW 2011.

  Thanks in advance

  LabVIEW 2012 support has been added with NI ELVISmx 4.4.  You can download and install the driver, which will install DAQmx 9.5.5 and ELVISmx 4.4 support for LabVIEW 2012, allowing you to use the DAQ Assistant and myDAQ in this version.

• Problem DaqMx LabVIEW

  Hello:

  Installed Labview 2012 yesterday, daqmx was already installed (9,6) since I used it with Measurement Studio 2012.

  LabVIEW does not recognize DAQmx.

  I'm using Labview examples and get daq mx errors.

  Thank you.

  You must install DAQmx after LabVIEW. Since LabVIEW did not exist when you have done the installation DAQmx, LabVIEW required records would obviously not created.

• Cannot find FP write in LabVIEW 2012

  System: Win7 64 bit

  LabVIEW: LabVIEW 2012 (64-bit)

  I can't find FP read/write etc in LabVIEW 2012.

  I installed FieldPoint 6.11 and disk driver OR. Nothing happened... And I can't find "fieldpoint" folder in "vi.lib".

  I noticed that my Win7 "Program files" and "Program files (x 86)". The labveiw program was in "Program files", I think. But there is also a "National Instrument" folder in "program feels (x 86). I just used by default to install the labivew.

  Do not know why. Can anyone help?

  Hi Yang,

  FieldPoint is not supported with 64-bit LabVIEW.  I propose to install LabVIEW 32 bit and then see if you can see these FieldPoint VI.

  Kind regards

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• Load a file EDS into LabView 2012

  Through research I found that DeviceNet Configurator is no longer available. I'm under LabView 2012 with IndComm/Devicenet 2.2 pilot. What replaces the DeviceNet Configurator? How to load the EDS files?

  Thank you

  Tennessee Paul

  My post here on a different topic, I thought that I would wear it to conclude this thread.

  Load an EDS file to the slave device

  1. Right-click on the slave device
  
  
  2. Select "Sheet"... »
  
  
  3. Click on add files...
  
  
  4. Navigate to the location of the EDS file.
  
  
  5. Select the file.
  
  
  6. Click OK.
  
  
  7. In the left pane, expand the data sheet newly added up to reach the node displays the version.
  
  
  8. Select the version.
  
  
  9. Click OK.

  Check the device and file EDS

  1. Right-click on the slave device
  
  
  1. Select utilities
  
  
  2. Select the Panel of Test online
  
  
  2. Select the option 'Device status' in the field of category on the left.
  
  
  3. On the right, select the slave device, you want to check.
  
  
  4. Click on "check the device".
  
  
  5. Read the errors/warnings or lack thereof.

  Edit the file EDS

  To change the EDS file, I used EZ-EDS , which is a specific devicenet EDS of ODVA freeware Editor.

  I did my corrections and saved my file EDS. (After having saved my original, of course).

  Remove the installed Labview EDS file

  1. Navigate to the following location: C:\ProgramData\National Instruments\NI-IndComm for DeviceNet\Datasheet
  
  
  2. Remove the sheet (Note: there is more that one datasheet added manually.) Additional EDS files come with the IndComm driver. Find the EDS file for the specific device that you want to replace and delete).

• Error Code HDL with CRio RFP generation after update for LabView 2012

  Hello everyone,

  I use a CRio DP Comsoft master/slave module for my communication with a PLC system. The application worked perfectly under LabView 2011. After the update to LabView2012, I got an error message that the HDL Code generation failed. After that I've updated also the Software NI Profibus CRio in Version 1.3, but this n ' t´t solve the problem. The next step was to use the example of project code "CS_cRIO-PB_DP-MasterExample" which was delivered with the new NI CRio Profibus software. Even with this code example, the problem still exists. For detailed information on the configuration and the error message please refer to the screenshot. Any help or idea would be appreciated.

  Jürgen

  Hi Jürgen,

  I looked inside and could reproduce this error. Somehow the compiler with LV 2012 has problems with the coded 8.5.1 Subvi LV. Please use the attached VI and copy it to the following location. (\\Program Files\National Instruments\LabVIEW 2012\vi.lib\addons\Comsoft.lib\cRIO PB)

  Before do you it please close your LabVIEW.

  Then try to compile again.

  Let me know if it still does not. We are currently working on a new installer that will correct this problem.

  DirkW

• need to convert keithley 2500 photodiode double meter driver for labview 2012

  I installed the driver but found could not use it because the driver version is too old.

  Can anyone help to convert so that it could be used in my labview 2012? Thank you very much.

  There is a separate Commission for the versionhttp://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion of Conversion

• Legend bug XYGraph slider blocks instantly LabView 2012

  Hello!

  I'm just facing a very annoying bug.

  Please find my attached VI example, I would like to know the weather, you can confirm the bug? Run the VI if you want to see a curve (in fact the bug appears even if you put all the data on the chart, if you do, all the same) and after that try to click the cursor vertical scroll bar legend to scroll upwards or downwards to see the cursor names.

  It instantly blocks my full version of LabVIEW 2012 Edition: 12.0.1f2 (32 bit). This XYGraph is still blocking LabView... I can't continue with my project, now I will just try to work around the error, I'll try to remove the sliders and then add them again...

  In any case, a very strange and very annoying behavior...

  Anyone could repeat the same bug?

  Thanks for the support!

  The reason for the accident seems to be duplication of the cursor "Gas_inject." There are four times. Using the property node 'CursorList' to remove these duplicates made the VI DO NOT crash when you move the vertical scroll bar of the legend of cursor.

  To simplify:

  Read the CursorList first, remove any duplicated the table manually in the indicator (right-click on the element > data operations > Delete Element). The change to a control, change the property node to write and run the VI once.

  Norbert

• I need to convert programs written in Labview 8.5 in Labview 2012 when I want to run these programs in 2012 of Labview VI?

  I have VI moreover written in Labview 8.5. These programs can work well in labview 8.5.  Should I convert these programs VI Labview 2012 when I want to run these programs in 2012 of Labview? Thank you.

  LabVIEW 2012 can open the screw of from 6.0.  But if you save them in 2012, you need to perform a "save for precedent" to get back them to 8.5.

  This resource may be useful:http://www.ni.com/white-paper/8387/en

• 2013 LabVIEW allows the user to return to the LabVIEW 2012 or 2011?

  Hi all

  I have LabVIEW 2013. I noticed that in LabVIEW measurement and Automation Explorer (MAX) under the LabVIEW Run-Time 2012 SP1 f2 software is listed. This somehow means I can return or switch between LabVIEW 2013 and 2012 without having to install/reinstall?

  The reason why I ask, is that I have several instrument drivers written for LabVIEW 2012 sp1 I want to use.

  This is probably a silly question, I know.

  On a related note, is it possible to tell if a driver written for an older version of LabVIEW will work in a new version of LabVIEW? Or you just have to play with the software?

  Thank you

  Oh, John

  Hi John,.

  More explicitly answer your main question - you can install multiple versions of LabVIEW in parallel (at the same time, on the same PC), however that one version of patch of each major version (for example, 2011, 2012, 2013) can be installed - you can not install 2012 and 2012 SP1 at the same time.

  The runtime that you noticed has probably been installed with another component that was built in this environment.

  As Dennis said, the big thing to keep in mind is that your screws will have to be upconvertis/resized when moving between versions.

  If your instrument driver is written in 2012 LabVIEW using the serial at low altitude of LabVIEW drivers, it will certainly work in 2013.  If you open the screw driver in 2013 and that you do not see workload issues, you should be good to go.  If pilots request DLL or another have external dependencies can be involved more work.

  Kind regards

• LabVIEW 2012 Patch f1 crashes

  I just installed LabVIEW 2012 and unfortunately I've met a few worries.

  I got one "Installer has stopped working" when I installed device drivers.  But the installation seems fine.  LabVIEW began and MAX would open up.  I wasn't looking to connect to any material yet.

  When you try to install the fix for the f1, LabVIEW crashed again.  Net subsequent attempts the same thing.

  Has anyone else had this problem with the patch?

  It's on a Win7 with 8.6 and previously installed 2011 LV machine.

  

  Even if accidents are reported, all seems to be installed correctly.  It just seems like Windows is confused when the installation program stops.

  This seems to be a problem with Windows on my machine and not a problem with LabVIEW.

• exe created with labview, 2012 will not be run using LVRTE2013

  I created an exe using Labview 2012.  I had the user to install the latest rte (lvrte2013).  The exe wouldn't and told the user to TENS of 2012.  Should users have the same rte for each exe?

  Yes.  But different rural enterprises can co-exist on the same PC.

• Impossible to install labview 2012

  I try to install labview 2012 on my 64 bit Windows 7 system, but fails;

  Here are the symptoms:

  (1) I click setup.exe directly and it shows that:

  

  (2) if I run it with the administrator, it appears that:

  

  (3) I checked that I can execute another exe file...

  Thank you

  Hi Bestchun,

  It could be a damaged Setup file. Try to re - please download the installer of ni.com/downloads.

  I will follow this post, answer so if this does not work for you.

  N