VI server between 2 screws in 2 different projects

Hello!

I have a VI (referred as "T_FANUC.vi" in the example), which is part of "TETRA.lvproj". This VI is called by a main VI and works up to this Main.vi nearby.

I did another project named Supervision.lvproj and created a VI named "Simulation Robot.vi" (VI attached to this post). I am using VI server to get/set the values of control of "T_FANUC.vi". But the node property Server VI 'Exec. State"still sees"T_FANUC.vi"as inactive, even if it goes...

However if "T_FANUC" is placed in the same project as "Simulation Robot.vi", it works very well...

But the project rest w/LV 8.5.1 and running on the same computer.

Is it not possible to use a server VI between two screws in two different projects?

zyl7,

I enclose a simple model of how call a VI a VI in a different project.  The server settings VI of the calling (Supervision) does not matter in this case, but the project called (TETRA) must configure access VI server on a port that is not already in use.

Chris M

Tags: NI Software

Similar Questions

  • Problems with the transmission of data between the screws

    Hi all.

    I have a question where my program slows considerably during the race.

    The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

    Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

    The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

    I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

    My questions are:

    (1) why the data passing by invoking a node of the control on the target would cause the downturn?

    (2) how would I get/pass information of queue between the two screws are not connected?

    (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

    I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

    Thanks in advance,

    Jim


  • Migrate the file server between domains in the same server, I need to do?

    I need to know the steps to migrate between areas without movingdata diferents fileserver will be because in the same server. I have found no support document, or someone who did share their experiences, I onlyfound for information on how to migrate a file server between domains but mobile from one server to another with the WSTF tool. -

    The information of my it environment is based on Windows 2008 R2 with the domain Active Directory forest root, with Exchange 2010 and Lync Server 2010.
    Thanks for any help. See you soon. Good bye.
    Kind regards
    Diego Alonso.

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Query to get the difference between 2 totals of 2 different queries

    I wanted to know if it is possible to get the difference between 2 totals of 2 different queries. Let me explain with an example:

    1 application ofst - sum (homepass) Select table 1

    2th query: select sum (homepass) from table2

    Is it possible to display the difference as -

    Select sum (homepass) in table 1 - sum (homepass) from table2

    I know that the above query would give syntax error, but is there a better way or something to get the above done task from a single query.


    Hopefully, my question is clear.


    Please get back with the answer to my query.


    Concerning

    You can always do something like

    SELECT a.cnt - b.cnt
    FROM (SELECT sum(homepass) cnt from table1) a,
          (SELECT sum(homepass) cnt from table2) b
    

    I'd be somewhat dubious, although on a data model that had two tables with the same name of the column where it really made sense to subtract one amount from each other.  This would strongly imply that there should be a single table with an additional column TYPE eventually.

    Justin

  • If I have a room that is repeated in 2 different projects can I have this common part only in a subproject

    I have 2 different projects in RoboHelp 11 who have a 'common' part, namely several chapters are identical, possibly with minor modifications that could be resolved with flags, and I was wondering if it would be possible to have the 'common' in a subproject I could manage for two other projects.

    Hello

    No, not of RoboSource Control.

    If you click Display > pods > Resource Manager, you should see the pop open the resource manager. From there, you are able to create a place that would be 'shared' between projects or authors.

    If you create a location, then take topics that are "common" and store them in this place by dragging the project resource manager window. RoboHelp to do best in the United Kingdom. Then in the other project, you open the resource manager and drag the themes of the window of the resource to the project manager. Perhaps one of the subjects is named: feed the Alligators

    Once you have done this, perhaps you edit text or insert a picture in the section "feed the Alligators". Resource Manager must invite then say you that about your Bill does more to this topic in the resource manager. You should have an option to sync. And at that time, the process must copy the theme of the project to the location of the resource manager. Then when you open the other project, Manager of resources and then you would say that what is in the resource manager is different from what is in the project. And offer an option to sync. And at that point, the content should be copied from the resource to the project manager.

    Pretty slick when you think about it!

    See you soon... Rick

  • "Sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. »

    Hello!
    I installed Win Live Movie Maker, but when I tried to open my .mswmm file I only got this message: "sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. "The file will open correctly in Windows Live Movie Maker 7, so everything should be OK. What I am doing wrong?

    Hello

    This is supported in Windows Live movie maker file type.

    http://help.live.com/help.aspx?project=wl_movie_makerv1&market=en-IE&querytype=topic&query=wl_movie_maker_ref_supportedfiles.htm

    For any request or problems related to Windows Live Movie maker, please post to the Windows Live Help forum.

    Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Team Foundation Server Issues in the Oracle (ODT) database project

    Hi all

    Developer Dotnet and Oracle, I fortunately came across the ODT.
    Unfortunately, I have some problems in combination with the Team Foundation Server that hopefully someone here, the experts may resolve.

    So, it's the environment...

    Client:
    Windows 7 business
    Teacher of Visual Studio 2010.
    ODT with ODAC 12.1.0.1.0

    Servers:
    Foundation of the Server 2012 team
    Oracle Database 11 g Release 11.2.0.2.0 - 64 bit


    Description of the problem:

    Well, almost everything seems to be working.
    I can connect to my database diagram in Server Explorer, edit and save back views, functions, packages,... and save them to the server.
    I can create a new "project database Oracle" in Visual Studio.
    Now, I right click and select "generate the Script to create project". This also works very well. Points of view or anything else I clicked are added to the Oracle database project.
    Finally I select 'Add to Source code control' and the whole solution and any addition of scripts are archived as you wish.
    I can now change, automatically checked it as used in th IDE of VS.
    Works perfectly so far...

    But now I have problems to add new scripts. It makes me crazy.
    I right click again on a new view, etc. and select "Generate the Script to create project". The script is added to the same Oracle database project.
    The project file is also removed, because it now has a new added file. BUT the same script file will not be added to the source control.
    And worse yet, I'm not easily able to add the file manually in the context menu of the command "Add to source control" or something similar.
    The only way is to open windows Explorer, move to the previously added script file and add it to source code control using power tools shell extensions.
    I can't imagine that this is the way planned to add additional scripts to the ODP.

    So is there anyone around who can tell me how to solve this problem?

    Best regards
    Martin

    Hi Martin,

    I have recently come to know that there actually is a bug very similar to the old version of Oracle development tools.

    It is fixed in the latest version (12.1.0.1.2 or later).

    When you get a chance, please try it.

    Thank you

    Christian

  • Help! CC of PHOTOSHOP: I want to reproduce the same project more than once and to modify their dynamic objects linked separately as different projects - can you help me? Please

    I want to reproduce the same project more than once and to modify their dynamic objects linked separately as different projects - can you help me? Please

    If related files please consult are located next to the file that contains the duplicate folder and edit files duplicate so corresponding should translate into changed content in the file duplicate.

  • Using the modules of different projects

    Hello

    I try to reuse the existing modules of different projects to compile in another new project, but it simply doesn't!

    I have 2 projects with the following modules in them:

    Project: MyModuleProjA1, MyModuleProjA2, MyModuleProjA3

    Project b: MyModuleProjB1, MyModuleProjB2, MyModuleProjB3

    Now, I created a new project called project c, in which I want to use MyModuleProjA2 and MyModuleProjB3 as well as a new module that belongs to this alone, that would be MyModuleProjC1.

    First I tried directly to copy the folder bin-debug the project MyModuleProjA2.swf has and of MyModuleProjB3.swf from the project b bin-debug folder, in bin-debug the project c, but when I ran file main application of Project c, he throwed hell lots of runtime errors, without even loading the initial screen. It was all black.

    I wonder if there is another way to compile?

    I tried searching on the net, who speaks like - link-report = lnkreport.xml - compiler options, charge-externs=lnkreport.xml,-garder-tous-type-seectors = true, - allow-source-path-to overlap = true. But nothing has worked yet (or I'm not using the right way?)

    Basic idea is to reuse the code base instead of duplicating those modules in c. Since there will be a lot of changes\enhancements to these modules, I don't want to encode in two locations all the time want to just maintain the code of the modules in one place and reusing just it is swf in other projects.

    I use Adobe Flash Builder 4.6, but project SDK is A 3.6.

    Appreciate your help...

    Well, I'm not familiar with Maven yet.

    I solved it by changing the module setting to "do not optimize" and resused in my other projects. I think it would be a little bigger in file size it would have been if I had optimized. But it's okay for me...

    See you soon!

  • Aggregator seems to randomize questions of different project files work

    I am using Captivate 5.5.

    I created 10 quizzes, each in its own project of captivate.  Each project has its own quiz ID and question slides are randomly using a single tank.   "When I publish each file of the captivate project, Serge (swf file), the questions are very good.

    However, when I combine all the 10 files in a global project, I get questions quiz on different project files... and the title slide does not even match the slide for this quiz!  For example, after the aggregation of project folder, my quiz Ch 2 would contain various chapters... question slides and the

    the title slide is not even chapter for that matter.

    When you use Question Pools, SWF files for pools are external to the SWF.  Filenames for question pools are drawn from what you called the pool, with the _CQP of letters on the end.

    When you use aggregator, all SWF files for each project aggregated file are placed in the same folder.  Each project is not kept isolated in it's own folder.

    So if one of your pools in question happen to have the same name, they can replace another aggregator compiles in the same folder.

    Return to your project and make sure that first give each published project file a unique name.  Then add the name of each pool of issue with some additional letters which differentiate the pool similar to any of the other projects.  And then republish all new and build another associate from scratch version.  See if that solves the problem.

  • Captivate 5: problems with Scripts Java - try to jump to a certain slides on different projects

    I have the code here I did searches for Captivate 5 access certain slide in a different project, this code has attempted to use in projects separately and simultaneously:

    function GetSlideParam() {}
    If (Window.Location.href.IndexOf('?) Slide =')! = -1) {}
    startIndex var = window.location.href.indexOf ('? = slide') + 7;
    var URL = window.location.href.toString ();
    var slideNumber = URL.substring (startIndex);

    If (slideNumber! = "| slideNumber! = undefined) {}
    setTimeout (function () {NavigateToSlide (slideNumber)}; 200);
    }

    }
    }

    function NavigateToSlide (requestedSlide) {}
    cpObj = document var. Captivate;
    cpObj.cpEISetValue ('cpCmndGotoSlide', requestedSlide - 1);
    cpObj.cpEISetValue('rdcmndResume',1);
    }

    GetSlideParam();

    Here is my file of URL success on in the properties of the button that was required to access some slides according to my research:

    (my project to move to) .htm? slide = 2

    Ultimately, he did not and just jump to slide 1 on the other project, no matter what I tried to do it or how I modified the script and properties button and drag the project... Help, please... Just thought that maybe you guys would know some scripts, it's why I ask you guys that no matter whether it's a Captivate because specialists Captivate couldn't answer my question being clueless on the script of this part.

    There is no 'secret code '. All is in your NavigateToSlide service management, and apply some logic. (The Javascript logic, to be precise.)

    The class variable is of type "string" , and I am 100% sure of this because you use the function 'substring' to create his argument. I know that because "substring" will always return a string, even when you give him a Boolean or integer (in these cases, it will return an empty string, but it is always a string - a little as the number 0 may represent "nothing at all", but it is always a number).

    Look in the NaviatgeToSLide function. What happens when you subtract 1 from one channel? ... UH. It depends on the language, really. Most of the languages report it as an error, but Javascript does not work (for a variety of reasons - if this bothers you, use Google to find out why).

    Now, assuming that the variable 'requestedSlide' contains a valid slide number and it is stored as a string, how you converting cela a real number? Using a pretty basic Javascript function, in fact:

    cpObj.cpEISetValue('cpCmndGotoSlide',parseInt(requestedSlide) - 1);
    

    Needless to say that I'm not 100% sure that this will fix the problem, because I can not test your code using InDesign.

  • Gap between the screws with the NI 9237 & Assistants DAQ

    I have a set of scales attached to a NI 9237 module in a cDAQ 9174. I have two separate screws following the gross load cell output (mV/V). The two screws acquire through a DAQ Assistant. Two Assistants DAQ are configured in the same way, and yet they have different output values. Reads around 0.003 mV/V being not charged while the other reads 0.03 mV/V - an order of magnitude difference. Any thoughts on why this is? Thank you!

    Thanks David,.

    Finally, I followed him there down to a calibration offset null being applied to a DAQ Assistant and not the other. Is there a way to remove this discrepancy in the DAQ Assistant? It is not evident. I only noticed after DAQmx code conversion and managed to remove it it.

  • Locate the screw example on different Windows computers

    I get an error when I try to run screws on different Windows machines, due to the different parts of a built-in Subvi.  More specifically, I have a few screws that call create_ramp.vi, which is in... \LabVIEW 2011\examples\analysis\intpxmpl. LLB.  On one computer, the Subvi is C:\Documents and Settings\Program NIUninstaller Instruments\...  On another computer, it is in C:\Program NIUninstaller Instruments\...  (The difference is the Documents and Settings folder.  I accepted the choice of the repertoire by default when I've upgraded to LV2011.)  If I save a VI on a single computer, it gives an error when I run on the other and vice versa.  How to make the platform more independent VI?  Can I have the high level VI forget one suggested the path to a Subvi? Which would avoid an error and then having to click through a bunch of directories to specify the LLB file, whenever I go to the computers.  Why do just with this Subvi and not the many other integrated subVIs that call my programs?

    Thank you.

    On the file menu, e/s, there is a constant path small library VI. In the development environment, it always points to the location of the directory of vi.lib. Band that once and you get where LV is installed.

    In turn the constant of the default directory usually points to lv where is installed, but can be edited.

    Mike...

  • Switching between the screws in the secondary

    I have trouble getting a test program to work. I created two screws (test1 and test 2) what to do simple tasks (such as counting or turn on a Boolean value). I'm trying to switch between the two screws through a primary school in VI. I would like to run the two screws when she is called, and then switch between them while they run. However, I was making mistakes and I am at a loss to know what to do. Screws are attached.

    One of the errors I get is that of VI references are not valid, and I don't know how to solve this problem.

    OI, I'm having a few problems this morning.  Try this vi.

  • How to set up multiple LIVE IDS prod certificates on Sharepoint 2010 single server runs several Sharepoint Sites with different domain on port 443?

    Hello

    I integrated LIVE ID with Sharepoint 2010 and got the same compliance.

    In sharepoint server 2010, several sharepoint sites are run under port 443 with different domain names.

    I configured 1 LIVE ID certificate for one of our sharepoint sites would like to know can I use the same certificate for other sites too or I need to install other certificates LIVE ID to access other sites.

    How can I get prod LIVE ID certificates are available for free as nexus offers two certificates INT and PROD (x 509 certificate) or do I need to buy.

    If I need to buy where can I buy it go?

    Hi ppdremsadm,
     

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to the configuration of Live ID in Sharepoint 2010. It should be better in the Forums of Windows Sharepoint.

    Please ask your question in products and technology SharePoint forums to improve assistance in this regard.

Maybe you are looking for

  • What is the 'Click me' logo on my homepage of Mozilla

    My homepage has a logo of Mozilla dimensional distorted three containing the words "click me". He appeared for the first time today. Is this legitimate or should I worry?

  • Satellite C850-b820 - regularized disply

    Hello.I have toshiba satellite model pskcev core i7. windows 7 64-bit operating system.It worked well until suddenly the disply becomes white, nothing can be seen, I restarted, the screen is black, nothing can be done even I restarted several times,

  • iDVD deinterlacing bad or bad handling of DVD standard?

    Hello I asked someone to look at two files that I created with iDVD from the same source. One was 3000 Kbps, the other was 5900 kbps (iDVD seems never to use a higher bitrate!) He said that the flows are still enough to avoid hard objects. But he sai

  • I can't use my Touchpad while typing

    Hello, I'm running a new Inspiron 15R SE 7520 laptop, and I understand that it is a feature built into this laptop. While I understand the purpose behind it all, I can't find a way to disable this feature. I tried to turn "Palm Tracking" to a minimum

  • BlackBerry 10 "Add BCC" option for the Email account settings

    We enjoyed much option on BB OS devices has been the ability to set a fixed BCC email address for individual email accounts. I know that I can add it to individual messages, but it is tedious to do it for each email. Can BB please re - introduce this